DMOSKEWDBodypack Transmitter

Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany Publ. 04/20, 583962/A01 Quick Guide Kurzanleitung Guide rapide Guida rapida Guía de inicio rápido Guia rápido Beknopte handleiding Krótka instrukcja obsługi Snabbguide Kort vejledning Pikaohje Γρήγορος οδηγός Kısa Kılavuz Краткая инструкция 퀵 가이드 Evolution Wireless Digital EW-D Smart Assist Sennheiser Documentation App or online at www.sennheiser.com/download EW-D_ Instruction Manual EW-D EM EW-D Smart AssistIn the box Antennas Audio Out Power supply Battery Identify/Battery check EW-D SK EW-D SKM-S On/Off OR OR OR OR 6.3 mmXLR-3 antenna inputs audio outputs power supply EU KOR CN US UK AU ≥ 0,5 m ≥ 1 m * * *optional accessories: ADP UHF (470 - 1075 MHz) AD 1800 (1400 - 2400 MHz) MUTESYNC DATA LED DATA LED SYNC SYNC SYNC SETUP DOWN ESC Rack mount angles Power supply Power supply adapters MUTE ON/OFF ON/OFF ON/OFF LINK LED LINK LED DATA LED SK 2 AA batteries (included) *optional: BA 70 rechargeable battery 2 AA batteries (included) *optional: BA 70 rechargeable battery * * SKM-S LINK LED EM/SK/SKM-S Off -> OnEM SKM-S SK shorton EM/SK/SKM-S On -> Off longoff SK/SKM-S On -> Identify/Check shortIdentify/Check ≤ 100 % ≤ 60 % ≤ 20 % LINK LED SK/SKM-S Display of synced EM SKM-S SK 23 1 1234 MUTE MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT The EW-D Smart Assist app simplifies your workflow EW-D Smart Assist app provides automated setup, operation and monitoring using any iOS or Android device Easy frequency allocation and wireless channel naming help to keep syst ems organized Mobile access to all system settings centralizes control and eliminates the need for complicated menu navigation on each device Intelligent setup automatically creates reliable wireless connections, no wireless expertise required ai158615684537_583962_0420_A01_QG_EW-D_PRT.pdf 2 06.04.2020 09:07:27 Display Menu LEDs Mute Color coding sets Sync Key lock MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT optional accessories for EM, SK and SKM-S wireless link 1: wireless link 2: etc. Firmware update in progress Bluetooth active to - sync with transmitter - connect with app - - Link ok audio active - - No link Device switched off - No link - - Link ok audio muted or no capsule on SKM - - Link ok audio clip - - Link ok Low transmitter battery EM EM short press short press short press LINK LED DATA LED SKM-S DATA DATA LINK LINK unlocked press both locked SK SKM-S SK 25 cm (10") ME 2ME 3 ME 4 SKM-S SKM-S 2...3 cm (1") Radio frequency level Transmitter audio level ChannelAudio output level GainTransmitter battery Menu Frequency Key lock Mute Mute lock Antenna switching diversity App connection MUTESYNC 470.200 MHz dB 060 124dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT 21 MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT Instruction Manual Instruction Manual Instruction Manual Instruction Manual Instruction Manual Instruction Manual Mute Lock Instruction Manual MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT Gain MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT AF Out MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN AF OUT CHRFAFBAT Mute Lock MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN MUTE LOCK CHRFAFBAT Auto Scan MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN AUTO SCAN CHRFAFBAT Channel MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN CHANNEL CHRFAFBAT Tune MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN TUNE CHRFAFBAT Reset MHz dB dB AF OUTGAIN AF OUT MUTE LOCK AUTO SCAN CHANNEL TUNE RESET GAIN CHRFAFBAT MHz dB dB AF OUTGAIN GAIN CHRFAFBAT SK MUTESYNC MUTESYNC Instruction manual | Bedienungsanleitung | Notice d'emploi | Istruzioni per l'uso | Instrucciones de manejo | Manual de instruções | Gebruiksaanwijzing | Instrukcja obsługi | Bruksanvisning | Betjenings vejledning | Käyttöohje | Οδηγίεςλειτουργίας | Kullanım kılavuzu | Инструкцияпоэксплуатации | | | 사용 설명서 | Sennheiser Documentation App EW-D Smart Assist RESET RESET MUTESYNC OR MHz dB dB AF OUTGAINCHRFAFBAT MHz dB dB AF OUTGAINCHRFAFBAT etc. ai158615684537_583962_0420_A01_QG_EW-D_PRT.pdf 1 06.04.2020 09:07:26

Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ. 07/20, 583963/A02 Evolution Wireless Digital EW-D EM EW-D SK EW-D SKM-S Technische Daten & Herstellererklärungen Specifications & Manufacturer declarations Caractéristiques techniques & Déclarations du fabricant Dati tecnici & Dichiarazioni del costruttore Especificaciones técnicas & Declaraciones del fabricante Dados técnicos & Declarações do fabricante Technische specificaties & Verklaringen van de fabrikant Dane techniczne & Deklaracje producenta Tekniska data & Tillverkarintyg Tekniske data & Producenterklæringer Tekniset tiedot & Valmistajan vakuutukset Τεχνικά χαρακτηριστικά & Δηλώσεις κατασκευαστή Teknik Bilgiler & Üretici Beyanları Технические характеристики & Заявления изготовителя 技术参数 & 制造商声明 技術仕様 & 製造者宣言 기술 데이터 & 제조사 선언 SPECIFICATIONS System Audio link frequency ranges Q1-6 R1-6 R4-9 S1-7 S4-7 S7-10 U1/5 V3-4 Y1-3 470.2 - 526 MHz 520 - 576 MHz 552 - 607.8 MHz 606.2 - 662 MHz 630 - 662 MHz 662 - 693.8 MHz 823.2 - 831.8 MHz & 863.2 - 864.8 MHz 925.2 - 937.3 MHz 1785.2 - 1799.8 MHz Bluetooth® Low Energy (BLE) frequency range 2402 - 2480 MHz Audio frequency response20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature-10 °C - +55 °C (14 °F - 131 °F) Relative humidity5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage11 - 13 V Input current≤ 300 mA Transmit power (radiated)BLE: max. 10 mW EIRP Audio output power18 dBu max. Dimensions212 x 44 x 189 mm Weightapprox. 1000 g (without an- tennas and power supply) EW-D SKM-S (Handheld Transmitter) Input voltage2.0 - 4.35 V Input current< 300 mA Power supply2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth200 kHz Transmit power (radiated) Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions (ø x l)50 x 268 mm (incl. MMD 835 microphone module) 40 x 200 mm (without microphone module) Weight (without batteries)approx. 304 g (incl. MMD 835 microphone module) approx. 195 g (without microphone module) EW-D SK (Bodypack Transmitter) Input voltage2.0 - 4.35 V Input current< 300 mA Power supply2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth200 kHz Transmit power (radiated) Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions63 x 80 x 20 mm (without antenna) Weight (without batteries)approx. 120 g DE Rahmenbedingungen und Einschränkungen für die Nutzung von Frequenzen In Ihrem Land gelten möglicherweise gesonderte Rahmen- bedingungen und Einschränkungen für die Nutzung von Fre- quenzen. Informieren Sie sich vor der Inbetriebnahme des Produktes unter folgender Adresse: www.sennheiser.com/frequency-information Herstellererklärungen Garantie Sennheiser electronic GmbH & Co. KG übernimmt für diese Produkte eine Garantie von 24 Monaten. Die aktuell geltenden Garantiebedingungen können Sie über das Internet www.sennheiser.com oder Ihren Sennhei- ser-Partner beziehen. In Übereinstimmung mit den folgenden Anforde- rungen WEEE-Richtlinie (2012/19/EU) Batterierichtlinie (2006/66/EG & 2013/56/EU) Hinweise zur Entsorgung Das Symbol der durchgestrichenen Mülltonne auf Rädern auf Produkt, Batterie/Akku (wenn vorhanden) und/oder Ver- packung weist Sie darauf hin, dass diese Produkte am Ende ihrer Lebensdauer nicht über den normalen Hausmüll ent- sorgt werden dürfen, sondern einer separaten Entsorgung zuzuführen sind. Für Verpackungen beachten Sie bitte die gesetzlichen Vorschriften zur Abfalltrennung in Ihrem Land. Weitere Informationen zum Recycling dieser Produkte er- halten Sie bei Ihrer Gemeindeverwaltung, den kommunalen Sammel- oder Rücknahmestellen oder bei Ihrem Sennhei- ser-Partner. Das separate Sammeln von Elektro- und Elektronik-Altgerä- ten, Batterien/Akkus (wenn vorhanden) und Verpackungen dient dazu, die Wiederverwendung und/oder Verwertung zu fördern und negative Effekte, beispielsweise durch poten- ziell enthaltene Schadstoffe, zu vermeiden. Hiermit leisten Sie einen wichtigen Beitrag zum Umwelt- und Gesundheits- schutz. EU-Konformitätserklärung • RoHS-Richtlinie (2011/65/EU) Hiermit erklärt Sennheiser electronic GmbH & Co. KG, dass der Funkanlagentyp EW-D EM, EW-D SK, EW-D SKM-S der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: www.sennheiser.com/download. EN Conditions and restrictions for using fre- quencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the informati- on for your country at the following address: www.sennheiser.com/frequency-information Manufacturer declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. FOR AUSTRALIA ONLY: Sennheiser goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are en- titled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to other rights or remedies un- der law. Nothing in this warranty excludes, limits or modifies any liability of Sennheiser which is imposed by law, or limits or modifies any remedy available to the consumer which is granted by law. To make a claim under this warranty, contact Sennheiser Technical Services and Spare Parts Sales c/o Linfox, Gate 3, 1 Fox Lane, Erskine Park, 2759, NSW Australia Phone: (02) 9910 6700, email: [email protected] All expenses of claiming the warranty will be borne by the person making the claim. The Sennh…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST f or Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 08-31-2020 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name DMOSKEWD EW-D SK For the product stated above, we request permanent confidentiality for exhibits which contain Operational Description, Block Diagram, Schematics, Parts Lists or Tune Up Information. The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact me at the address shown below. Sincerely,                !" #$%&'&&( )  *$   +,'-&./#%&01&&2'/3,   4   

SHORT-TERM CONFIDENTIALITY REQUEST                      !" # $    % #&'()
*+,*-
-
./01/23.2456/76897     :(;  (; < =  >$ ?;;$;@  A : &?%@?@ = =B =   C    =    D= =  C   E BF %  G H#  IJKLMNOINO*ILM    % C =  C  =   %  =   E ';P  B     &; GA    ; Q#  R   =    D %  =   %      =      =       "  =  C C   =  %S('S&(&' B=D  D  ==    C % C; A D TUVWX Y Z[\] ^\_[VZ`a]bca deVUZYf\gZYZ_\] h]ai\WWUaYZVjbW`\dWkUlUWUaY j\YYm\UW\]\V\f`]aYUfndopqcarXn sdtZoa]uvwxyxxz\{\dZ]|vn\]dZYb hmaY\}~yx€uwx‚ƒxx„y…~ TUVWrXYZ[\]†W\YYm\UW\]rfad

Annex A 1-8392/19-01-01_AnnexA External photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2020-06-17Document No. 1-8392/19-01-01_AnnexA2/6 Photo 3 Photo 4 2020-06-17Document No. 1-8392/19-01-01_AnnexA3/6 Photo 5 Photo 6 2020-06-17Document No. 1-8392/19-01-01_AnnexA4/6 Photo 7 2020-06-17Document No. 1-8392/19-01-01_AnnexA5/6 Document history VersionApplied changesDate of release initial release2020-06-17 - END OF DOCUMENT - 2020-06-17Document No. 1-8392/19-01-01_AnnexA6/6

Labeling Infos Example below is valid only for devices which are subject to Part 15 Certification Procedure and DOC procedure in USA and subject to RSS-210 Certification in Canada. The text „ This device complies...“ may be placed in the user manual only if the device is too small to show the text on the label. USA: FCC ID: <Grantee><EPC> is the certification number <Grantee> is the Grantee code, made of 3-5 alphanumeric characters (A-Z, 0-9), assigned by FCC. <EPC> is the Equipment product code (EPC) assigned by the applicant. Minimum of 1 character and maximum of 14 characters and may consist ONLY of capital letters, Arabic numerals or combination thereof, the hyphen or dash (-). Applicant should assign the least number of characters that will adequately identify the product. Canada: IC: <CN>-<UPN> is the certification number; <CN> is the Company Number (CN), made of at most 6 alphanumeric characters (A-Z, 0-9), assigned by Industry Canada; <UPN> is the Unique Product Number (UPN), made of at most 11 alphanumeric characters (A-Z, 0-9) assigned by the applicant. Permitted alphanumeric characters used in UPN are capital letters (A-Z) and digits (0-9). Other characters, such as "#", "/" or "-", shall not be used. Additionally the PMN must be placed either on the product label, the packaging or the user manual.

Annex B 1-8392/19-01-01_AnnexB Internal photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2020-06-17Document No. 1-8392/19-01-01_AnnexB2/5 Photo 3 Photo 4 2020-06-17Document No. 1-8392/19-01-01_AnnexB3/5 Photo 5 Photo 6 2020-06-17Document No. 1-8392/19-01-01_AnnexB4/5 Document history VersionApplied changesDate of release initial release2020-06-17 - END OF DOCUMENT - 2020-06-17Document No. 1-8392/19-01-01_AnnexB5/5

BNetzA - CAB - 02/21 - 102 D - P L - 1 2 0 7 6 - 0 1 - 0 3 SAR Test exclusion documentation according to FCC KDB 447498, RSS-102 Report identification number: 1-8392/19-01-14 Exclusion (FCC_ISED) contains the module with the following certification numbers FCC ID DMOSKEWD ISED number 2099A-SKEWD HVIN (Hardware Version Identification Number) EW-D SK PMN (Product Marketing Name) EW-D SK FVIN (Firmware Version Identification Number) 1.0.0 HMN (Host Marketing Name) -/- This report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-8392/19-01-14 © CTC advanced GmbH Page 2 of 4 EUT technologies: Range Serial Nr. Frquency [MHz] Measured max. EIRP,RMS [dBm] Target Max. EIRP [dBm] Max. EIRP (Declared) [dBm] Q1-6 Cond.: 1220000405 470.20 9.88 11.0 (± 1) 12.0 498.10 10.96 526.00 11.09 R1-6 Cond.: 1220000433 520.00 9.62 10.0 (± 1) 11.0 548.00 10.14 576.00 10.34 R4-9 Cond.: 1220000401 552.00 10.84 10.0 (± 1) 11.0 579.90 10.90 607.80 10.54 BTLE Cond.: 1220000402 2402.00 5.80 5.0 (± 1) 6.0 2440.00 5.89 2480.00 5.89 Test report no.: 1-8392/19-01-14 © CTC advanced GmbH Page 3 of 4 SAR test exclusion according to KDB447498 (General RF Exposure Guidance v06) Equation from Chapter 4.3.1: Standalone SAR test exclusion considerations page 11 and ff. (1) Standalone SAR test exclusion for 100 MHz to 6 GHz at test separation distances ≤ 50mm ( Threshold 1-g;10-g ) × d seperation / f 0.5 where Threshold 1-g;10-g is 3 for 1-g; 7.5 for 10-g d seperation is the min. test separation distance; 5mm is used if the distance is less f is the RF channel transmit frequency The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. frequency d separation Powerlimit [MHz] [mm] [mW] [dBm] [mW] 470.20 5 3 21.88 12.00 15.85 498.10 5 3 21.25 12.00 15.85 526.00 5 3 20.68 12.00 15.85 520.00 5 3 20.80 11.00 12.59 548.00 5 3 20.26 11.00 12.59 576.00 5 3 19.76 11.00 12.59 552.00 5 3 20.19 11.00 12.59 579.90 5 3 19.70 11.00 12.59 607.80 5 3 19.24 11.00 12.59 2402.00 5 3 9.68 6.00 3.98 2440.00 5 3 9.60 6.00 3.98 2480.00 5 3 9.53 6.00 3.98 R1-6 R4-9 BTLE Threshold 1-g P max-declared range Q1-6 Test report no.: 1-8392/19-01-14 © CTC advanced GmbH Page 4 of 4 SAR test exclusion according to RSS-102 Issue 5 Section 2.5.1/Table 1 The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. frequencyd separation Powerlimit [MHz][mm][mW][dBm][mW] 470.201 g 17.0012.0015.85yes 498.101 g 17.0012.0015.85yes 526.001 g 17.0012.0015.85yes 520.001 g 16.0011.0012.59yes 548.001 g 16.0011.0012.59yes 576.001 g 16.0011.0012.59yes 552.001 g 15.5011.0012.59yes 579.901 g 15.5011.0012.59yes 607.801 g 15.5011.0012.59yes 2402.001 g 6.006.003.98yes 2440.001 g 6.006.003.98yes 2480.001 g 6.006.003.98yes R4-9 BTLE tissue volume P max-declared Exclusion Q1-6 R1-6 The limits above are defined for body worn application and therefore cover all use cases.

Annex D 1-8392/19-01-01_AnnexD Setup photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2020-06-17Document No. 1-8392/19-01-01_AnnexD2/7 Photo 3 Photo 4 2020-06-17Document No. 1-8392/19-01-01_AnnexD3/7 Photo 5 Photo 6 2020-06-17Document No. 1-8392/19-01-01_AnnexD4/7 Photo 7 Photo 8 2020-06-17Document No. 1-8392/19-01-01_AnnexD5/7 Photo 9 2020-06-17Document No. 1-8392/19-01-01_AnnexD6/7 Document history VersionApplied changesDate of release initial release2020-06-17 - END OF DOCUMENT - 2020-06-17Document No. 1-8392/19-01-01_AnnexD7/7