E4E6CYCIDV6700206RFID System

Electromagnetic Inductive RFID System V670 Series User’s Manual ID Controller, Antenna, and ID Tag ID Controller Model V670-CD1D-V1 Antenna Model V670-H11 Model V670-H51 Model V670-H51Q ID Tag Model V670-D13F03 Model V670-D13F01 Model V670-D13F01H Catalog No. Z148-E1-04 Introduction We sincerely appreciate your purchase of the V670 series of the Electromagnetic Induction Type RFID System. The V670 series is fully supported by our cutting-edge technology and vast expertise. This user's manual provides vital information on its operational functions and product performances, and includes full instructions for use. READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. SUITABILITY FOR USE THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products. OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the product. At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: • Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PERFORMANCE DATA Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety. The following signal words are used in this instruction manual. The following alert symbols are used in this instruction manual. The following alert statemen…

Text truncated - open the document above for the full version.

V670-CD1D-V1-N External Photo Front View Back View Left View Right View Upper View Lower View

Label sticking position Label(FCC)

V670-CD1D-V1-N Internal Photo PWB(1) Side A Side B PWB(2) Side A (Transmission circuit) Side B (Reception circuit) PWB(3) Side A Side B Composition PWB(1)-PWB(2) Front PWB(1)-PWB(2) Side PWB(1) and PWB(2) in Case PWB(3) in Case

Test report No. : 26DE0183-HO Page : 2 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) CONTENTS PAGE SECTION 1: Client information............................................................................................................ 3 SECTION 2: Equipment under test (E.U.T.) .......................................................................................3 SECTION 3: Test specification, procedures & results ........................................................................ 4 SECTION 4: Operation of E.U.T. during testing.................................................................................7 SECTION 5: Conducted emission ......................................................................................................... 9 SECTION 6: Radiated emission (Fundamental , Spurious Emission and Spectrum Mask ) ........ 10 SECTION 7: -20dB Bandwidth ........................................................................................................... 11 SECTION 8: 99% Occupied Bandwidth ............................................................................................ 11 SECTION 9: Frequency Tolerance ..................................................................................................... 11 APPENDIX 1: Photographs of test setup............................................................................................ 12 Radiated emission ................................................................................................................ 14 Worst Case Position (Y-axis) .............................................................................................. 16 APPENDIX 2: Test instruments .......................................................................................................... 19 APPENDIX 3: Data of EMI test .......................................................................................................... 20 Conducted emission .............................................................................................................20 Radiated emission(Fundamental emission Spectrum Mask and Spurious emission : below 30MHz).................................................................................................................................. 22 Radiated emission (Spurious emission : above 30MHz)................................................... 24 –20dB Bandwidth.................................................................................................................26 99% Occupied Bandwidth(Reference Data) ..................................................................... 28 Frequency Tolerance ........................................................................................................... 30 Test report No. : 26DE0183-HO Page : 3 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) SECTION 1: Client information Company Name : OMRON Corporation Address : 20, Shimokaiinji, Nagaokakyou-shi, Kyoto 617-8510 Japan Telephone Number : +81-75-957-9849 Facsimile Number : +81-75-951-5124 Contact Person : Tetsuo Yoshida SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Radio Frequency Identification System Model No. : V670-CD1D-V1 (ID Controller) V670-H11 (Antenna) V670-H51 (Antenna)* V670-H51Q (Antenna)* *The antennas, V670-H51 and V670-H51Q, are electrically same, and the difference between them is only the material of the antenna case, and thus, V670-H51 has been tested as a representative. Serial No : 12 (V670-CD1D-V1) : 1 (V670-H11) : 2 (V670-H51) Rating : DC24V ±10% Country of Manufacture : Japan Receipt Date of Sample : January 10, 2006 Condition of EUT : Engineering type (Not for sale: This sample is equivalent to mass-produced items.) 2.2 Product Description Equipment Type : Transceiver Number of Channel : 1 Frequency Characteristics : 13.56MHz Modulation : Amplitude Shift Keying Bit rate : 212kbps Information antenna : Loop Antenna Test report No. : 26DE0183-HO Page : 4 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part15 Subpart C : 2005 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207: Conducted limits Section 15.225: Operation within the band 13.110-14.010MHz FCC 15.31 (e) This EUT provides stable voltage (DC9.0V) constantly to RF Module regardless of input voltage. Therefore, this EUT complies with the requirement. FCC Part 15.203 Antenna requirement The EUT has the external antenna connector, but it is installed by the professionals. Therefore, the equipment complies with the antenna requirement of Section 15.203. 3.2 Procedures and results No. Item Test Procedure Specification Remarks Deviation Worst margin*0)Results 1 Conducted emission ANSI C63.4:2003 7. AC powerline conducted emission measurements Section 15.207 - N/A 10.1dB 0.36884MHz, AV, N Complied 2 Electric Field Strength of Fundamental Emission ANSI C63.4:2003 13. Measurement of intentional radiators Section 15.225(a) Radiated N/A 47.1dB QP Complied 3 Spectrum Mask ANSI C63.4:2003 13. Measurement of intentional radiators Section 15.225(b)(c) Radiated N/A See data Complied 4 -20dB Bandwidth ANSI C63.4:2003 13. Measurement of intentional radiators Section15.215(c) Radiated N/A See data Complied 5 Electric Field Strength of Spurious Emission ANSI C63.4:2003 13. Measurement of intentional radi…

Text truncated - open the document above for the full version.

Test report No. : 26DE0183-HO Page : 12 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) APPENDIX 1: Photographs of test setup Conducted emission Antenna:V670-H51 and ID Tag:V670-D13F01H Front Rear Test report No. : 26DE0183-HO Page : 13 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Conducted emission Antenna:V670-H11 and ID Tag:V670-D13F03 Front Rear Test report No. : 26DE0183-HO Page : 14 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Radiated emission Antenna:V670-H51 and ID Tag:V670-D13F01H Front Rear Test report No. : 26DE0183-HO Page : 15 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Radiated emission Antenna:V670-H11 and ID Tag:V670-D13F03 Front Rear Test report No. : 26DE0183-HO Page : 16 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Worst Case Position (Y-axis) Antenna:V670-H51 X-axis Y-axis Test report No. : 26DE0183-HO Page : 17 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Worst Case Position (Y-axis) Antenna:V670-H11 X-axis Y-axis Test report No. : 26DE0183-HO Page : 18 of 31 Issued date : January 31, 2006 FCC ID : E4E6CYCIDV6700206 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Worst Case Position (Nomal) ID Controller:V670-CD1D-V1