ELVATR6BVehicle Security and Remote Start System

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name NUTEK CORPORATION Address No.167, Lane 235, Bauchiau Rd., Xindian District, New Taipei City, 23145, Taiwan FRN 0016907594 Grantee Code ELV FCC ID: ELVATR6B Authorized Contact Name Jason Wang Contact Phone + 886 2 2918 9487 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List NUTEK CORPORATION (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. NUTEK CORPORATION (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. NUTEK CORPORATION (“the applicant”) certifies that the equipment for which authorization is sought does not contain cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software. Applicant Signature:Date: 2026/07/08 Print Name: Jason Wang Title: Senior Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.3 March 4, 2025Page 1 of 1 Original Issue: Jan. 4, 2021

US Agent for Service of Process Declaration Date: 2026/5/10 To: Federal Communications Commission Subject: Designation of U.S. Agent for Service of Process Pursuant to Section 2.911(d)(7) of the FCC Rules, the Applicant hereby designates the following U.S.-based entity as the agent for service of process for matters related to FCC equipment authorization. Applicant (Grantee) Information Company Name: NUTEK CORPORATION Address: No.167, Lane 235, Bauchiau Rd., Xindian District, New Taipei City, 23145, Taiwan FRN: 0016907594 Product Information Model No.FCC ID 4361215、4361223 ELVATR6B 4361216、4361218 ELVATRPG 4361217 、4361219 ELVATRPH JS7J-15K601-BB、4361173 ELVATRPE U.S. Agent Information Company Name: Voxx Automotive, Inc. Address: 2365 Pontiac Road, Auburn Hills, MI 48326 Country: USA Contact Person: Douglas Kline Title: US Agent E-Mail: [email protected] FRN: This company is not doing business with FCC and has no FRN The Applicant acknowledges that the above-named U.S. Agent is designated for acceptance of service of process on behalf of the Applicant. The undersigned U.S. Agent accepts this appointment and agrees to act as the designated agent for service of process. This appointment shall remain in effect until the FCC is notified otherwise by either party. Applicant (Grantee) Name: Jason Wang Title: Senior Manager Signature: ___________________________ U.S. Agent Acceptance Name: Douglas Kline Title: US Agent Signature: ______________________

Model Difference Letter Date: July 13, 2026 Subject: Declaration of Model Differences FCC ID: ELVATR6B ID: 0016907594 To Whom It May Concern, We, [NUTEK CORPORATION], hereby declare that the product models listed below are identical in design, circuitry, PCB layout, RF module, and electrical components. The only difference between the models is the target market. Separate P/Ns are assigned for different markets only. These differences do not affect the RF parameters or EMC characteristics Model List: •4361215 •4361223 ----------------------------------- Name: Jason Wang Title: Senior Manager Company: NUTEK CORPORATION Email: [email protected] Phone: + 886 2 2918 9487

Date: July 8, 2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: ELVATR6B To whom it may concern: We, the undersigned, hereby authorize Kevin Tsai / Deputy Manager of Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with NUTEK CORPORATION This authorization is valid until further written notice from the applicant. Printed Name: Jason Wang Title: Senior Manager Company Name: NUTEK CORPORATION

Project No: TM-2602000330P FCC ID: ELVATR6B Page 1 / 15 Report No.: TMWK2606002677KS Rev. 00 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RF Exposure Evaluation Report FCC 47 CFR § 2.1091 for Vehicle Security and Remote Start System Model Name.: 4361215, 4361223 Prepared for: NUTEK CORPORATION No.167, Lane 235, Bauchiau Rd., Xindian District, New Taipei City, 23145, Taiwan Prepared by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City, Taiwan. Issue Date: July 06, 2026 Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, NIST or any government agencies. The test results in the report only apply to the tested sample. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No: TM-2602000330P Page 2 / 15 Report No.: TMWK2606002677KS Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 July 06, 2026 Initial Issue ALL Allison Chen This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No: TM-2602000330P Page 3 / 15 Report No.: TMWK2606002677KS Rev. 00 Table of Contents 1 ATTESTATION OF TEST RESULTS ................................................................... 4 2 TEST SPECIFICATION, METHODS AND PROCEDURES ................................. 5 3 DEVICE UNDER TEST (DUT) INFORMATION .................................................... 6 3.1 DUT DESCRIPTION ............................................................................................................................................. 6 3.2 WIRELESS TECHNOLOGIES .............................................................................................................................. 7 4 MEASUREMENT UNCERTAINTY ....................................................................... 9 5 MAXIMUM PERMISSIBLE EXPOSURE ............................................................ 10 5.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ............................................................................. 10 5.2 MPE CALCULATION METHOD .......................................................................................................................... 11 5.3 MPE EXEMPTION .............................................................................................................................................. 12 5.4 MULTIPLE RF SOURCES .................................................................................................................................. 13 6 MPE EXEMPTION OPTION B ............................................................................ 14 7 FACILITIES ........................................................................................................ 15 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No: TM-2602000330P Page 4 / 15 Report No.: TMWK2606002677KS Rev. 00 1 Attestation of Test Results Applicant Name NUTEK CORPORATION Model Name 4361215, 4361223 Applicable Standards FCC 47 CFR § 2.1091 FCC 47 CFR § 1.1310 Published RF exposure KDB procedures Receive EUT Date: March 08, 2026 Date of Test: May 11, 2026 Compliance Certification Services Inc. , tested the above equipment in accordance with the requirements set forth in the above standards. Determination of compliance is based on the results of the compliance measurement,not taking into account measurement instrumentation uncertainy.All indications of Pass/Fail in this report are opinions expressed by Compliance Certification Services Inc, based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved & Released By: Tested by: Sky Zhou Asst. Section Manager Compliance Certification Services Inc. KW Huang Engineer Compliance Certification Services Inc. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No: TM-2602000330P Page 5 / 15 Report No.: TMWK2606002677KS Rev. 00 2 Test Specification, Methods and Procedures The tests documented in this report were performed in accordance with FCC 47 CFR § 2.1091, the follo…

Text truncated - open the document above for the full version.

Antenna Specification FCC Regulatory Certification Project Name : 4361215 James Chiu, Engineering Date: 2026-03-05 1. Document Information Project Name: 4361215 Model: AQ11 Antenna Type: PCB Trace Antenna Purpose: This document describes the antenna specification and radiation characteristics for FCC certification of the device. 2. General Antenna Specifications ItemSpecification Antenna TypePCB Trace Antenna Operating Frequency Range902 ~ 928 MHz Center Frequency913.6 MHz Peak Gain (Max)-1.58 dBi Measurement PlanesHorizontal Plane / Vertical Plane Reference Impedance50 Ω ManufacturerNutek Corporation 3. Antenna Dimensions The antenna is integrated on the PCB as shown in the assembly drawing below. All dimensions are in millimeters. 4. Radiation Performance – Horizontal Plane Test Frequencies: 904 MHz / 913.6 MHz / 923.6 MHz Frequency (MHz)Max Gain (dBi)Min Gain (dBi)Avg Gain (dBi) 904-1.71-16.61-7.34 913.6-2.87-17.56-8.07 923.6-1.58-16.69-7.21 5. Radiation Performance – Vertical Plane Test Frequencies: 904 MHz / 913.6 MHz / 923.6 MHz Frequency (MHz)Max Gain (dBi)Min Gain (dBi)Avg Gain (dBi) 904-11.15-34.66-19.00 913.6-11.67-33.48-19.92 923.6-11.15-34.66-19.08

Project No: TM-2602000330P FCC ID: ELVATR6B Page: 1 / 60 Report No.: TMWK2602000904KR IC: 3671B-43612150 Rev.: 00 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-247 Test Standard FCC Part 15.247 IC RSS-247 issue 4 and IC RSS-GEN issue 5 Product name Vehicle Security and Remote Start System Brand Name N/A Model No. 4361215, 4361223 Test Result Pass Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10-2020 (FCC), ANSI C63.10-2020 + Cor. 1-2023 + C63.10a-2024 + Errata to C63.10a-2024 (IC) and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of Compliance Certification Services Inc.( Wugu Laboratory) Approved by: Sehni Hu Supervisor This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No: TM-2602000330P Page: 2 / 60 Report No.: TMWK2602000904KR Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 July 06, 2026 Initial Issue ALL Allison Chen This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No: TM-2602000330P Page: 3 / 60 Report No.: TMWK2602000904KR Rev.: 00 Table of contents 1. GENERAL INFORMATION ........................................................................................ 4 1.1 EUT INFORMATION .................................................................................................. 4 1.2 EUT CHANNEL INFORMATION ................................................................................ 5 1.3 ANTENNA INFORMATION ........................................................................................ 6 1.4 MEASUREMENT UNCERTAINTY .............................................................................. 6 1.5 FACILITIES AND TEST LOCATION .......................................................................... 7 1.6 INSTRUMENT CALIBRATION ................................................................................... 8 1.7 SUPPORT AND EUT ACCESSORIES EQUIPMENT ................................................. 9 1.8 TEST SET UP DIAGRAM ......................................................................................... 10 1.9 TEST PROGRAM ..................................................................................................... 10 1.10 TEST METHODOLOGY AND APPLIED STANDARDS ........................................... 10 2. TEST SUMMARY ..................................................................................................... 11 3. DESCRIPTION OF TEST MODES............................................................................ 12 3.1 THE WORST MODE OF OPERATING CONDITION ................................................ 12 3.2 THE WORST MODE OF MEASUREMENT .............................................................. 13 3.3 EUT DUTY CYCLE ................................................................................................... 14 4. TEST RESULT ......................................................................................................... 15 4.1 AC POWER LINE CONDUCTED EMISSION ........................................................... 15 4.2 20DB BANDWIDTH AND OCCUPIED BANDWIDTH (99%) .................................... 16 4.3 OUTPUT POWER MEASUREMENT ........................................................................ 20 4.4 FREQUENCY SEPARATION ................................................................................... 22 4.5 NUMBER OF HOPPING ........................................................................................... 25 4.6 CONDUCTED BANDEDGE AND SPURIOUS EMISSION........................................ 27 4.7 TIME OF OCCUPANCY (DWELL TIME) .................................................................. 30 4.8 RADIATION BANDEDGE AND SPURIOUS EMISSION .......................................... 32 APPENDIX 1 - PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Proje…

Text truncated - open the document above for the full version.