EMJDDGRFG42.4GHz Pico Dongle

Wireless Laser Mouse with 2.4GHz Pico Dongle User’s Guide Introduction Package Contents • 2.4GHz Pico Dongle x 1 • AAA Battery x 1 pc • User’s Guide x 1 System Requirements • Pentium processor or equivalent • At least one USB port (USB 2.0 or 1.1) • Operating System: Windows ® XP with Service Pack 1 or higher, Windows ® Vista, Windows ®7 Feature It is a mobile size mouse with new technology 2.4G wireless optical mouse. The RF distance is more than 10 meter. Button uses magnetic face plate design for battery change and 2.4GHz Pico Dongle storage for an easier operation. It provides user to more choice to have different color or pattern key as per personal preference as an add‐ on value to users. It uses the 2.4GHz Pico Dongle can storage in mouse with good portable for users. It uses only one AAA battery as less weight for more portable and the battery life is more than 4 months. It also provides a low battery indicator on top of the mouse to warning user for battery change Regulatory Compliance Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐ Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Statement Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif est conforme à la norme CNR‐210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Date: October 12, 2012 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: EMJDDGRFG4 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 ext.1710 Fax: 886-2-8797-1565 Email: [email protected]

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Power of Attorney Date: October 12, 2012 To whom it may concern: We, the undersigned PRIMAX ELECTRONICS LTD. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan Branch on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 ext.1710 Fax: 886-2-8797-1565 Email: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2 Page 3

FCC ID: EMJDDGRFG4 Report No.: RF 120718D08 Operational Description This device is a 2.4GHz Pico Dongle. The transmitter of the EUT is powered by 5Vdc from host equipment. The antenna is Printed antenna. The other instruction, please have a look at the users manual.

Report No.: RF120718D08 1 of 28 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF120718D08 MODEL NO.: DGRFG4 FCC ID: EMJDDGRFG4 RECEIVED: Jul. 18, 2012 TESTED: Jul. 20 ~ 25, 2012 ISSUED: Jul. 27, 2012 APPLICANT: PRIMAX ELECTRONICS LTD. ADDRESS: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120718D08 2 of 28 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD.............................................................................. 3 1. CERTIFICATION ........................................................................................... 4 2. SUMMARY OF TEST RESULTS ................................................................... 5 2.1 MEASUREMENT UNCERTAINTY ................................................................ 5 3. GENERAL INFORMATION ........................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT .............................................................. 6 3.2 DESCRIPTION OF TEST MODES ................................................................ 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................ 8 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................ 10 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................... 10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................. 11 4. TEST TYPES AND RESULTS ..................................................................... 12 4.1 CONDUCTED EMISSION MEASUREMENT .............................................. 12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................ 12 4.1.2 TEST INSTRUMENTS ................................................................................ 13 4.1.3 TEST PROCEDURES ................................................................................. 13 4.1.4 DEVIATION FROM TEST STANDARD ....................................................... 14 4.1.5 TEST SETUP .............................................................................................. 14 4.1.6 EUT OPERATING CONDITIONS ................................................................ 14 4.1.7 TEST RESULTS .......................................................................................... 15 4.2 RADIATED EMISSION AND BAND EDGE MEASUREMENT ..................... 17 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ................................. 17 4.2.2 TEST INSTRUMENTS ................................................................................ 18 4.2.3 TEST PROCEDURES ................................................................................. 19 4.2.4 DEVIATION FROM TEST STANDARD ....................................................... 19 4.2.5 TEST SETUP .............................................................................................. 20 4.2.6 EUT OPERATING CONDITIONS ................................................................ 20 4.2.7 TEST RESULTS .......................................................................................... 21 5. PHOTOGRAPHS OF THE TEST CONFIGURATION .................................. 26 6. INFORMATION ON THE TESTING LABORATORIES ................................ 27 7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ..................................................... 28 Report No.: RF120718D08 3 of 28 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF120718D08 Original release Jul. 27, 2012 Report No.: RF120718D08 4 of 28 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: 2.4GHz Pico Dongle BRAND: PRIMAX MODEL NO.: DGRFG4 APPLICANT: PRIMAX ELECTRONICS LTD. TESTED: Jul. 20 ~ 25, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: ( Annie Chang / Supervisor ) APPROVED BY : , DATE: ( Ken Liu / Manager ) Report No.: RF120718D08 5 of 28 Report Forma…

Text truncated - open the document above for the full version.

Report No.: RF120904D09-1 1 of 2 Report Format Version 5.0.0 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: RF120904D09-1 2 of 2 Report Format Version 5.0.0 RADIATED EMISSION TEST