
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Jojo Zhou
Project No.: 0808C013 Page 5 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 6 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 7 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 8 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 9 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 10 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 11 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 5 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 6 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 7 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 8 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 9 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 10 of 11 Neutron Engineering Inc. 0808C013 0808C013 Project No.: 0808C013 Page 11 of 11 Neutron Engineering Inc. 0808C013 0808C013
Report No.: NEI-FCCP-1-0808C013 Page 2 of 46 Neutron Engineering Inc. Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: NEI-FCCP-1-0808C013 Page 3 of 46 Neutron Engineering Inc. Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 MEASUREMENT INSTRUMENTS LIST 17 4.2.3 TEST PROCEDURE 18 4.2.4 DEVIATION FROM TEST STANDARD 18 4.2.5 TEST SETUP 19 4.2.6 EUT OPERATING CONDITIONS 19 4.2.7 TEST RESULTS (BETWEEN 30 – 1000 MHz) 20 4.2.8 TEST RESULTS (ABOVE 1000 MHz) 22 4.2.9 TEST RESULTS (2400 – 2483.5 MHz) 34 4.2.10 TEST RESULTS (Restricted Bands Requirements) 35 5 . BANDWIDTH TEST 39 5.1 MEASUREMENT INSTRUMENTS LIST 39 5.2 TEST PROCEDURE 39 5.3 DEVIATION FROM STANDARD 39 5.4 TEST SETUP 39 5.5 EUT OPERATION CONDITIONS 39 5.6 TEST RESULTS 40 Report No.: NEI-FCCP-1-0808C013 Page 4 of 46 Neutron Engineering Inc. Table of Contents Page 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 42 6.1 APPLIED PROCEDURES / LIMIT 42 6.1.1 MEASUREMENT INSTRUMENTS LIST 42 6.1.2 TEST PROCEDURE 42 6.1.3 DEVIATION FROM STANDARD 42 6.1.4 TEST SETUP 42 6.1.5 EUT OPERATION CONDITIONS 43 6.1.6 TEST RESULTS 44 7 . EUT TEST PHOTO 46 Report No.: NEI-FCCP-1-0808C013 Page 5 of 46 Neutron Engineering Inc. 1. CERTIFICATION E q u i p m e n t : Pleomax 2.4GHz Wireless Multimedia Keyboard Trade Name : Pleomax Model Name : KMOC-310B A p p l i c a n t : Primax Electronics Ltd. F a c t o r y : Dongguan Primax Electronic &Telecommunication Products Ltd. A d d r e s s : Liu Wu District, Shek Kit Town, Dongguan City, Guang Dong Province,P.R.China Date of Test : Aug. 07, 2008 ~ Aug. 12, 2008 Te s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANCI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-0808C013) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: NEI-FCCP-1-0808C013 Page 6 of 46 Neutron Engineering Inc. 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Standard Section Test Item Judgment Remark 15.207 Conducted Emission - N/A 15.249 Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Report No.: NEI-FCCP-1-0808C013 Page 7 of 46 Neutron Engineering Inc. 2.1 TEST FACILITY The test facilities used to collect the test data in this report is C01/OS02 at the location of No.132-1, Lane 329, Sec. 2, Palain Road, Shijr City, Taipei, Taiwan. Neutron's test firm number is 95335 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U,where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2,providing a level of confidence of approximately 95 %。 A. Conducted Measurement : Test Site Method Measurement Frequency Range U,(dB) NOTE C01 ANSI150 KHz ~ 30MHz 1.94 B. Radiated Measurement : Test Site Method Measurement Frequency Range Ant. H / V U,(dB) NOTE OS-01 ANSI30MHz ~ 200MHz V 3.82 30MHz ~ 200MHz H 3.60 200MHz ~ 1,000MHz V 3.86 200MHz ~ 1,000MHz H 3.94 OS-02 ANSI30MHz ~ 200MHz V 2.48 30MHz ~ 200MHz H 2.16 200MHz ~ 1,000MHz V 2.50 200MHz ~ 1,000MHz H 2.66 Report No.: NEI-FCCP-1-0808C013 Page 8 of 46 Neutron Engineering Inc. 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT Equipment Pleomax 2.4GHz Wireless Multimedia Keyboard Trade Name Pleomax Model Name. KMOC-310B OEM Brand/Model Name N/A Model Difference N/A Product Description The EUT is a Pleomax 2.4GHz Wireless Multimedia Keyboard. Product Type Low Power Communication Device Operation Frequency: 2402~2478 MHz Modulation Type: GFSK:1Mbps Number Of Channel 77CH Antenna Designation: Printe…
Text truncated - open the document above for the full version.
Report No.: NEI-FCCP-1-0808C013 Page 46 of 46 Neutron Engineering Inc. 7. EUT TEST PHOTO Radiated Measurement Photos Report No.: NEI-FCCP-1-0808C013 Page 46 of 46 Neutron Engineering Inc. 7. EUT TEST PHOTO Radiated Measurement Photos
No.132-1,Lane 329.Sec.2, Palain Rd., Shijr City, · Taipei · Taiwan
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | - |
Wireless Headset
Equipment Class
DTS - Digital Transmission Systemwegear MW1 Creator Mouse
Equipment Class
DTS - Digital Transmission Systemwegear MW1 2.4G Dongle
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Dongle
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Level Bridge
Equipment Class
DTS - Digital Transmission System