EMJKRF-ICAP14iPad2 Keyboard Capsule

Keyboard First time use When you unpack your iCapsule II, the internal battery is only partially charged. You should charge it fully before using it. Charge the battery Connect your iCapsule II to a computer or the power adapter using the USB cable (provided) to charge the internal battery. Note: USB cable charging voltage is 4.4v ~ 6.0v. It is recommended to use iPad 2 chargers or regular computers. Rocketfish iPad 2 Keyboard Capsule RF-iCAP14 I Quick Setup Guide # Component 1 Earphone jack 2 Battery LED 3 Bluetooth connection LED 4 30-pin connect slot 5 Micro USB port Package contents • Keyboard • Ear phone jack spare cover • USB cable • Quick Setup Guide Features • 82-key design, 20 hot keys for iPad 2 • Easily switch between two Bluetooth devices • Compact design for mobility and space saving • Working range up to 33 ft. (10 m) • Low power consumption • Bluetooth version 2.0 iCapsule II parts Setting up iCapsule II 1 Insert a finger into the gap, then lift to open the top panel. 2a For the Typing mode, align and 2b For the Stand mode, align the panel place the panel on the gap. with the front edge of the keyboard. 3 Place the bottom edge of the iPad into the bottom of the frame, push up on the latch, then move the top edge of the iPad into the frame. 4 Release the latch to lock the iPad 2 in place. # Description 1 Home button 2 Search button 3 Photo Slide Show button 4 Virtual Keyboard button 5 Select All button 6 Select Left button 7 Select Right button 8 Copy button 9 Cut button 10 Paste button # Description 11 Previous track button 12 Play/Pause button 13 Next track button 14 Mute button 15 Volume down button 16 Volume up button 17 Lock button 18 Bluetooth-Fn button (Works with 19 and 20 only) 18+19 Switch Bluetooth device button 18+20 Pairing button Caps Lock Enter Shift Ctrl Option Alt ASDFGHJKL : ; " ' ZXCVBNM < , > . ? / QWE R T YU I OP } ] { [ | \ ~ ` ! 1 @ 2 # 3 $ 4 % 5 ^ 6 & 7 * 8 ( 9 ) 0 _ - + = Select All Select Left Select Right Tab Backspace Shift CommandCommand -Fn 1 2 A A B B Description Remove the rubber piece to connect the earphone to the iPad 2 earphone jack. Orange OFF: Battery full Orange ON: Battery charging Orange BLINKING: Battery low Green / Blue ON (2 seconds): Power on (green and blue stand for different paired devices) Green and Blue BLINKING: Searching for devices (pairing) Slide out the rubber piece to connect the 30 pin connector. Connects to the computer or the power adapter to charge the iCapsule battery. RF-iCAP14_11-0498_QSG_V1_EN.eps 1 6/8/2011 1:53:05 PMRF-iCAP14_11-0498_QSG_V1_EN.eps 1 6/8/2011 1:53:05 PM Pairing with an iPad 2 When you open your iCapsule II for the first time, it automatically enters discoverable mode for pairing. If the devices are not paired, press the Bluetooth-Fn + Pairing button to pair, then do the following: 1 On your iPad 2, turn on Bluetooth by going to Settings > General > Bluetooth. iPad 2 searches for devices. 2 Select the iPad 2 Keyboard Capsule. 3 When prompted, enter the passkey shown on your iPad 2, then press Enter. Once paired, you do not have to pair with the iPad 2 again. Note: Your iCapsule II can also pair and be used with other Bluetooth devices, such as an iPhone4 or a notebook PC. You can press Bluetooth-FN + Pairing button again to pair with another device. This allows you to type on your iPad, iPhone, Notebook PC, or any other bluetooth-enabled device. Simply toggle between the two devices by pressing the Bluetooth-FN + Switch Bluetooth device. To set up these additional devices press the Bluetooth-FN + Pairing button. Using the special keys Legal notices FCC caution You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. FCC statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. IC RSS-102 statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet équipement est conforme à l'exposition aux rayonnements IC limites établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre le radiateur et votre corps. IC RSS-Gen and RSS-210 statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. ENGLISH 11-0498 Button Home Search Photo slide show Virtual keyboard Select all, Select left, or Select right Copy or Cut Paste Play/Pause Next track or Previous track Volume up or Volume down Mute Lock Bluetooth-Fn + Switch Bluetooth-Fn + Pairing Description Press to return to the home screen Press to search keywords on your i…

Text truncated - open the document above for the full version.

Page 1 of 2 Type Designation: RF-iCAP14 External Photo Report Number: 17020961 001 Page 2 of 2 Type Designation: RF-iCAP14 External Photo Report Number: 17020961 001

29-84801B611 30400805800A FCC LABEL 30400805800A +0/-0.5mm 8. DATECOE 需對應的料號：30400786701X / 30400796400X / 30400796500X D Violet.Hu 2011/06/20 / 30400514264X . 實際生產日期由生管提供! 2 YY M DD A XXXXXX Factory code(東莞﹕A) Day code(01,02,03.......31) Month code(1月=A,2月=B.....12月=L) Year code(2011=11, 2012=12......) 5.Requirement of PRIMAX Part: 1. Comply with PRIMAX QW-5Q002 "Green Product Chemical Substances Specification" 2. Follow customer's specification as required. 3.Follow Halogen- Free requirement : Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm if required. 流水號 (000001~999999)) :底字黑銀 80#合成紙+亮P 9.實際尺寸請依樣品為准, 需與Bottom cover 現合OK後才量產 This device complies with Part 15 of the following two conditions: interference, and (2) this device must including interference that may cause *72MM * 3 0 M M iPad 2 Keyboard Capsule Model No.: RF-iCAP14 FCC ID: EMJKRF-ICAP14 IC: 4251A-KRFICAP14 Rating: 5VDC 200mA Made in China FCC Rules. Operation is subject to the (1) this device may not cause harmful accept any interference received, undesired operation. S/N:YYMDDAXXXXXX

Label location

Page 1 of 4 Type Designation: RF-iCAP14 Internal Photo Report Number: 17020961 001 Page 2 of 4 Type Designation: RF-iCAP14 Internal Photo Report Number: 17020961 001 Page 3 of 4 Type Designation: RF-iCAP14 Internal Photo Report Number: 17020961 001 Page 4 of 4 Type Designation: RF-iCAP14 Internal Photo Report Number: 17020961 001

Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 2 von 73 Page 2 of 73 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Passed 5.1.2 PEAK OUTPUT POWER RESULT: Passed 5.1.3 20DB BANDWIDTH AND 99% BANDWIDTH RESULT: Passed 5.1.4 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH RESULT: Passed 5.1.5 SPURIOUS EMISSIONS RESULT: Passed 5.1.6 FREQUENCY SEPARATION RESULT: Passed 5.1.7 NUMBER OF HOPPING FREQUENCY RESULT: Passed 5.1.8 TIME OF OCCUPANCY RESULT: Passed 5.1.9 RADIATED EMISSIONS RESULT: Passed 5.1.10 CONDUCTED EMISSIONS RESULT: Passed 6.1.1 ELECTROMAGNETIC FIELDS RESULT: Passed Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 3 von 73 Page 3 of 73 Contents 1. GENERAL REMARKS......................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS.......................................................................................... 4 2. TEST SITES...................................................................................................................... 4 2.1 TEST FACILITIES............................................................................................................... 4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS............................................................... 5 2.3 TRACEABILITY.................................................................................................................. 6 2.4 CALIBRATION................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY........................................................................................... 6 2.6 LOCATION OF ORIGINAL DATA........................................................................................... 6 2.7 STATUS OF FACILITY USED FOR TESTING........................................................................... 6 3. GENERAL PRODUCT INFORMATION.................................................................................... 7 3.1 PRODUCT FUNCTION AND INTENDED USE........................................................................... 7 3.2 RATINGS AND SYSTEM DETAILS........................................................................................ 7 3.3 INDEPENDENT OPERATION MODES.................................................................................... 8 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS....................................................... 9 3.5 SUBMITTED DOCUMENTS.................................................................................................. 9 4. TEST SET-UP AND OPERATION MODES.............................................................................. 9 4.1 PRINCIPLE OF CONFIGURATION SELECTION........................................................................ 9 4.2 TEST OPERATION AND TEST SOFTWARE............................................................................ 9 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT........................................................ 10 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE....................................................... 10 4.5 TEST SETUP DIAGRAM.................................................................................................... 10 5. TEST RESULTS............................................................................................................... 12 5.1 TRANSMITTER REQUIREMENT & TEST SUITES.................................................................. 12 5.1.1 Antenna Requirement ................................................................................................................12 5.1.2 Peak Output Power ....................................................................................................................13 5.1.3 20dB Bandwidth and 99% Bandwidth ........................................................................................16 5.1.4 Conducted Spurious Emissions measured in 100 kHz Bandwidth ............................................19 5.1.5 Spurious Emissions....................................................................................................................24 5.1.6 Frequency Separation................................................................................................................55 5.1.7 Number of hopping frequency....................................................................................................58 5.1.8 Time of Occupancy ....................................................................................................................60 5.1.9 Radiated emissions ....................................................................................................................63 5.1.10 Conducted emissions ............................................................................................................66 6. SAFETY HUMAN EXPOSURE............................................................................................. 69 6.1 RADIO FREQUENCY EXPOSURE COMPLIANCE................................................................... 69 6.1.1 Electromagnetic Fields ...............................................................................................................69 7. PHOTOGRAPHS OF THE TEST SET-UP.............................................................................. 70 Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 4 von 73 Page 4 of 73 8. LIST OF TABLES............................................................................................................. 73 9. LIST OF PHOTOGRAPHS.................................................................................................. 73 1. General Remarks 1.1 Complementary Materials All attachments are integral parts of this test report. This applies especially to the following appendix: Appendix 1: Test Result 2. Test Sites 2.1 Te…

Text truncated - open the document above for the full version.

Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 70 von 73 Page 70 of 73 7. Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (9kHz-30MHz) Photograph 2: Set-up for Spurious Emissions (30MHz-1GHz) Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 71 von 73 Page 71 of 73 Photograph 3: Set-up for Spurious Emissions (1GHz-18GHz) Photograph 4: Set-up for Spurious Emissions (18GHz-26GHz) Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 72 von 73 Page 72 of 73 Photograph 5: Set-up for Radiated emissions Photograph 6: Set-up for Conducted emissions

Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 70 von 73 Page 70 of 73 7. Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (9kHz-30MHz) Photograph 2: Set-up for Spurious Emissions (30MHz-1GHz) Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 71 von 73 Page 71 of 73 Photograph 3: Set-up for Spurious Emissions (1GHz-18GHz) Photograph 4: Set-up for Spurious Emissions (18GHz-26GHz) Produkte Products Prüfbericht - Nr.: Test Report No. 17020961 001 Seite 72 von 73 Page 72 of 73 Photograph 5: Set-up for Radiated emissions Photograph 6: Set-up for Conducted emissions