EMJKTPA-P006KHP Bluetooth Keyboard

Regulatory Notices This document provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for your product. Some of these notices may not apply to your product. 이 문서에는 국가 및 지역별 유무선 규제사항 설명과 제품의 준수 정보가 있습니다. 이러한 정보 중 일부는 귀하의 제품에 적용되지 않을 수 있습니다. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, write to HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 email [email protected], or call HP at 650-857-1501. To identify your product, refer to the part, series, or model number located on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user’s authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC/Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation of devices with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the user guides included with your device. During normal operation of devices with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the device display is closed. To identify the location of the wireless antennas, refer to the user guides included with your device. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. FCC/Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your device. Aviso para o Brasil Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth® capability, the device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Avis Canadien Ce dispositif numérique de Classe B répond aux exigences de la réglementation du Canada relative aux équipements causant des interférences CAN ICES-3(B)/ NMB-3(B). Si ce dispositif est doté de fonctionnalités de réseau sans fil ou Bluetooth, il est conforme aux normes d’exemption de licence RSS d’Industrie Canada. Son fonctionnement est assujetti aux deux conditions suivantes : 1) Ce dispositif ne doit causer aucune interférence dangereuse, et 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement indésirable. Radiation Exposure Statement This product complies with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user’s body or set the device to lower output power if such function is available. Déclaration d’exposition aux radiations Le produit est conforme aux limites d’exposition pour les appareils portables RF …

Text truncated - open the document above for the full version.

AAA 1 3 2 N16667-B21 *N16667-B21* PRINTER: Replace this box with Printed- In (PI) Statement(s) as per spec. NOTE: This box is simply a placeholder. PI Statement(s) do not have to fit inside the box but should be placed in this area. DEVICES HP Keyboard 3s 1 2 ENGLISH To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. ARABIC To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. BAHASA INDONESIA To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. BULGARIAN To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. CZECH To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. DANISH To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. GERMAN To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. INTERNATIONAL SPANISH To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. GREEK To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. FRENCH To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. 3 CROATIAN To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to switch between channels and show the current channel status. 1 long press Press and hold for 3 seconds to enter pairing mode for the current channel. ITALIAN To download the Bluetooth Pairing User Guide, go to http://www.hp.com/support. Bluetooth light status Description On Bluetooth device paired and connected. Off Bluetooth off Power light status Blinking white Power on Off Power off Blinking amber The battery is low. Replace the battery. Bluetooth press type 1 short press Press to sw…

Text truncated - open the document above for the full version.

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 886-2-2798-9008 Fax: 886-2-8798-1565 Declaration letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement Date: 2022-06-01 FCC ID:EMJKTPA-P006K The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! ------------------------------------------------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 Fax: 886-2-8797-1565 Email: [email protected]

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 886-2-2798-9008 Fax: 886-2-8798-1565 Date: May 15, 2022 FCC ID:EMJKTPA-P006K To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 Fax: 886-2-8797-1565 Email: [email protected]

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Date: 2022-05-15 FCC ID:EMJKTPA-P006K A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned, hereby authorize Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ------------------------------------------------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 Fax: 886-2-8797-1565 Email: [email protected]

Reference No.:BDKX-WTW-P22040931_ExtPho Page 1/3 Reference No.:BDKX-WTW-P22040931_ExtPho Page 2/3 Reference No.:BDKX-WTW-P22040931_ExtPho Page 3/3

Reference No.:BDKX-WTW-P22040931_IntPho Page 1/5 Reference No.:BDKX-WTW-P22040931_IntPho Page 2/5 Reference No.:BDKX-WTW-P22040931_IntPho Page 3/5 Reference No.:BDKX-WTW-P22040931_IntPho Page 4/5 Antenna Reference No.:BDKX-WTW-P22040931_IntPho Page 5/5

Report No.: MFBDKX-WTW-P22040931 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: MFBDKX-WTW-P22040931 FCC ID: EMJKTPA-P006K Test Model: TPA-P006K Received Date: 2022/4/27 Test Date: 2022/5/10 ~ 2022/5/13 Issued Date: 2022/6/1 Applicant: PRIMAX ELECTRONICS LTD. Address: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: MFBDKX-WTW-P22040931 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 6 Report No.: MFBDKX-WTW-P22040931 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued MFBDKX-WTW-P22040931 Original release. 2022/6/1 Report No.: MFBDKX-WTW-P22040931 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Bluetooth Keyboard Brand: hp Test Model: TPA-P006K Sample Status: Engineering sample Applicant: PRIMAX ELECTRONICS LTD. Test Date: 2022/5/10 ~ 2022/5/13 Standards: FCC Part 2 (Section 2.1093) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: 2022/6/1 Jessica Cheng / Senior Specialist Approved by : , Date: 2022/6/1 Jeremy Lin / Project Engineer Report No.: MFBDKX-WTW-P22040931 Page No. 5 / 6 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  .  to the nearest mW and mm before calculation.  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: MFBDKX-WTW-P22040931 Page No. 6 / 6 Report Format Version: 6.1.1 3 SAR Test Exclusion Thresholds Maximum measured transmitter power: Function Frequency (MHz) Max. AV Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 3) 1-g SAR test exclusion …

Text truncated - open the document above for the full version.

Report No.: RFBDKX-WTW-P22040931 Page No. 1 / 33 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P22040931 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBDKX-WTW-P22040931 FCC ID: EMJKTPA-P006K Model No.: TPA-P006K Received Date: 2022/4/27 Test Date: 2022/5/10 ~ 2022/5/13 Issued Date: 2022/6/1 Applicant: PRIMAX ELECTRONICS LTD. Address: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 Approved by: , Date: 2022/6/1 Jeremy Lin / Project Engineer This test report consists of 33 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Jessica Cheng / Senior Specialist This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBDKX-WTW-P22040931 Page No. 2 / 33 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P22040931 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 7 3.3 Channel List .............................................................................................................................................................. 7 3.4 Test Mode Applicability and Tested Channel Detail .................................................................................................. 8 3.5 Duty Cycle of Test Signal .......................................................................................................................................... 8 3.6 Test Program Used and Operation Descriptions ...................................................................................................... 9 3.7 Connection Diagram of EUT and Peripheral Devices .............................................................................................. 9 4 Test Instruments ...................................................................................................................................................... 10 4.1 RF Output Power .................................................................................................................................................... 10 4.2 Power Spectral Density .......................................................................................................................................... 10 4.3 6 dB Bandwidth ...................................................................................................................................................... 10 4.4 Conducted Out of Band Emissions ........................................................................................................................ 10 4.5 Unwanted Emissions below 1 GHz ........................................................................................................................ 11 4.6 Unwanted Emissions above 1 GHz .....................................................................................................…

Text truncated - open the document above for the full version.

Reference No.: BDKX-WTW-P22040931-TSup Page No. 1 / 2 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST <Frequency Range below 1GHz> Reference No.: BDKX-WTW-P22040931-TSup Page No. 2 / 2 RADIATED EMISSION TEST <Frequency Range above 1GHz>