EMJM2C401Bestbuy entry wireless mouse

Dynex Wireless Optical Mouse User’s Manual Important safety instructions l Batteries may explode or leak if they are improperly recharged, inserted, disposed of in fire, or mixed with used or different battery types. l There is a risk of explosion if a battery is replaced by an incorrect battery type. l Dispose of used batteries according to local regulations. Package Contents This package contains the following: l Wireless optical mouse l USB wireless receiver l Mouse driver CD l User’s manual l 2 AAA batteries l 1 Extension cable System Requirement l Microsoft Windows 2000, XP, Vista l Available USB port l CD-ROM / DVD-ROM Installing the mouse l To install the driver: Insert the enclosed CD into your computer’s disk drive and follow the on-screen instructions to install the driver. l To connect the mouse: 1. Open the battery cover 2. Install the AAA batteries 3. Close the battery cover and slide power button to ON side 4. Plug the USB receiver into your computer’s USB port The wireless optical mouse will then be ready to use. Using the mouse Using the Tilt Scroll Wheel The Tilt Scroll Wheel is designed for four-way navigation. You can view whole documents by turning the scroll wheel up, down, left, and right. Saving power You can turn off the mouse power by slide mouse bottom power button to OFF side to extend your battery life. Programming the mouse 1. Double-click the Mouse Setting icon in the taskbar. 2. Click the Wheel or Button tab, then select a item to modify the function. 3. Click OK when finished. Note: The optical technology can precisely detect the mouse motion on most surfaces. Avoid using the optical mouse on a reflective, transparent, metallic, or complex-pattern surface. Cleaning the mouse Wipe the bottom of the mouse with a damp, lint-free cloth. Additional information If the connection between your mouse and receiver is broken, you can re-link the mouse with the receiver as below step: 1. Press the connect button on the receiver, the LED indicator glitter 2. Press the connect button on the mouse bottom, the mouse is linked with the receiver, and the receiver’s LED indicator turns off. 3. If the mouse does not link with the receiver, please repeat above steps The LED indicator on the USB wireless receiver will become red when the mouse battery become weak. Please change the batteries immediately. Legal notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s Reorient or relocate the receiving antenna s Increase the separation between the equipment and receiver s Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. s Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Shielded interface cable, if any, must be used in order to comply with emission limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The Class B digital apparatus complies with Canadian ICE-003. California Proposition 65 warning: This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects or reproductive harm. Copyright © 2007 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and Product names are trademarks or registered trademarks of their respective holders, Specifications and features are subject to change without notice or obligation.

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: EMJM2C401 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------------------- C.T. Huang Compliance Dept./ Director Phone: 886-2-2798-9008 ext.1710 Fax: 886-2-8797-1565 Email: [email protected]

Power of Attorney Date: April 20, 2007 To whom it may concern: We, the undersigned PRIMAX ELECTRONICS LTD. hereby authorize Advance Data Technology Corporation (ADT) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by ADT on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------------------- C.T. Huang Compliance Dept./ Director Phone: 886-2-2798-9008 ext.1710 Fax: 886-2-8797-1565 Email: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT

2 3 . 5 6 1 m m 1.771 mm 1:1

FCC ID: EMJM2C401 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Page 2 Page 3

FCC ID: EMJM2C401 Report No.: RF960412A06 Operational Description The transmitter of the EUT (Wireless mouse) is powered by 3.0Vdc batteries. The type of antenna is Loop antenna. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference.

Report No.: RF960412A06 1 Report Format Version 2.0.5 FCC TEST REPORT REPORT NO.: RF960412A06 MODEL NO.: MORFC4UO, DX-WLMSE RECEIVED: April 12, 2007 TESTED: April 12, 2007 ISSUED: April 13, 2007 APPLICANT: PRIMAX ELECTRONICS LTD. ADDRESS: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. This test report consists of 15 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF960412A06 2 Report Format Version 2.0.5 Table of Contents 1 CERTIFICATION.............................................................................................3 2 SUMMARY OF TEST RESULTS.....................................................................4 2.1 MEASUREMENT UNCERTAINTY..................................................................4 3 GENERAL INFORMATION.............................................................................5 3.1 GENERAL DESCRIPTION OF EUT................................................................5 3.1 DESCRIPTION OF TEST MODES.................................................................6 3.2 CONFIGURATION OF SYSTEM UNDER TEST.............................................6 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..................7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.................................7 3.4 DESCRIPTION OF SUPPORT UNITS............................................................7 4 TEST PROCEDURE AND RESULT................................................................8 4.1 CONDUCTED EMISSION MEASUREMENT..................................................8 4.2 RADIATED EMISSION MEASUREMENT.......................................................8 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT....................................8 4.2.2 TEST INSTRUMENT......................................................................................9 4.2.3 TEST PROCEDURE.....................................................................................10 4.2.4 TEST SETUP.................................................................................................11 4.2.5 EUT OPERATING CONDITION.....................................................................11 4.2.6 TEST RESULT..............................................................................................12 5 INFORMATION ON THE TESTING LABORATORIES..................................14 APPENDIX-A ....................................................................................................A-1 Report No.: RF960412A06 3 Report Format Version 2.0.5 1 CERTIFICATION PRODUCT: Bestbuy entry wired mouse MODEL NO.: MORFC4UO (Brand Name: PRIMAX) DX-WLMSE (Brand Name: DYNEX) APPLICANT: PRIMAX ELECTRONICS LTD. TESTED: April 12, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.227) ANSI C63.4 -2003 The above equipment (Model: MORFC4UO) has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: April 13, 2007 ( Celia Chen ) TECHNICAL ACCEPTANCE : , DATE: April 13, 2007 Responsible for RF ( Jamison Chan ) APPROVED BY : , DATE: April 13, 2007 ( Ken Liu / Deputy Manager ) Report No.: RF960412A06 4 Report Format Version 2.0.5 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPE RESULT REMARK 15.207 Conducted Emission Test N/A Power supply is 3Vdc from batteries 15.227 15.209 Radiated Emission Test PASS Minimum passing margin is –14.06dB at 162.184MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Uncertainty Radiated emissions 3.55 dB Report No.: RF960412A06 5 Report Format Version 2.0.5 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Bestbuy entry wired mouse MODEL NO. MORFC4UO, DX-WLMSE FCC ID EMJM2C401 POWER SUPPLY 3.0Vdc from batteries MODULATION TYPE FSK CARRIER FREQUENCY OF EACH CHANNEL 27.045 MHz NUMBER OF CHANNEL 1 ANTENNA TYPE Loop antenna DATA CABLE NA I/O PORTS NA ASSOCIATED DEVICES NA NOTE: 1. The EUT is a wireless mouse, which is a transmitter. 2. The EUT has two model name, which are identical to each other except for their brand name only for marketing differentiation as follows: Brand Name Model No. Description PRIMAX MORFC4UO DYNEX DX-WLMSE marketing differentiation For the test, model: MORFC4UO was selected as the representative model and its data was recorded in this report. 3. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF960412A06 6 Report Format Version 2.0.5 3.1 DESCRIPTION OF TEST MODES One channel was provided to this EUT. Channel Frequency (MHz) 1 27.045MHz 3.2 CONFIGURATION OF SYSTEM UNDER TEST Test Table (Powered from batteries) Mechanical tool EUT (Mouse) Report No.: RF960412A06 7 Report Format Version 2.0.5 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL Applicable to EUT configure mode PLC RE<1G Description - Note √ N/A Where PLC: Power …

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST