EMJMMOWFFQULHP Wi-Fi Touch Mouse x7000

Hewlett-Packard MOWFFQUL Wi-Fi Mouse Quick Start Guide 1. System requirement: a. Microsoft Windows 7 Certificate notebook b. Microsoft Windows 7 Certificate Wireless dongle running on Win7 notebook. (ex: NETGEAR WNDA3100v2) c. WiFi mouse with FW v02.01.03.000 above. 2. Software a. WNDA3100v2_1.2_230-10601-03_setup.exe (This is for WNDA3100v2 wireless card) b. Ozmo software PAN driver (WinDriver-1-5-46-0) c. Wi-Fi Pairing Utility (Wi-Fi Pair_2011-1-12) 3. Installation steps a. Install Wireless Card driver ( ex: NETGEAR WNDA3100v2) a.1 – Double-click on the WNDA3100v2_1.2_230-10601-03_setup.exe then click “Next” Hewlett-Packard MOWFFQUL a.2 – Select “I Agree” then Click “Next” a.3 – Select “Express” then click “Next” Hewlett-Packard MOWFFQUL a.4 – Click “Next” a.5 – Select “No. I do not....” Then click “Next” Hewlett-Packard MOWFFQUL a.6 – Click “Next” a.7 – Click “Close” Hewlett-Packard MOWFFQUL a.8 – Select “Public network” a.9 – WiFi radio is open and connected. b. Install Ozmo Software PAN b.1 – Double click on the InstallPAN.exe Hewlett-Packard MOWFFQUL b.2 – Click “Next” b.3 – Click “Next” b.4 – If this dialog show up, please click “Install” b.5 – If this dialog show up, please click “Install” Hewlett-Packard MOWFFQUL b.6 – Click “Finish” b.7 – Close this window c. Pairing with Wi-Fi mouse c.1 – Open the Wi-Fi Pairing Wizard by double click on the “WiFiPair.exe”. (note: if your system is Win7-64bit, please locate to the folder x64) Hewlett-Packard MOWFFQUL c.2 – Power on your Wi-Fi mouse and press the “Connect” button on the bottom of the mouse. Then click “Next” c.3 – Wait for the mouse be detected. Hewlett-Packard MOWFFQUL Hewlett-Packard MOWFFQUL c.4 – Select the mouse which you want to connect with. Then click “Next” c.5 – Pairing with mouse Hewlett-Packard MOWFFQUL c.6 – Pairing successfully c.7 – Found new “USB Input Device” and your Wi-Fi mouse is workable now. Wi-Fi Pair2011-1-12.rarWinDriver-1-5-46-1.zip Hewlett-Packard MOWFFQUL Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment, and the antenna of this device must be integral. IMPORTANT NOTE: Radiation Exposure Statement: The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Hewlett-Packard MOWFFQUL IC Statement Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement: The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Date: August 3, 2011 General Declaration To Whom It May Concern: We, PRIMAX ELECTRONICS LTD. declares that the device does not have “Ad Hoc on non-US frequencies” and/or “on DFS frequencies” while applying for the following product. Trademark: HP Model name: MOWFFQUL FCC ID: EMJMMOWFFQUL If you have any questions regarding the declaration, please don’t hesitate to contact us. Thank you! ------------------------------------------------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 ext.1710 Fax: 886-2-8797-1565 Email: [email protected]

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Date: August 3, 2011 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: EMJMMOWFFQUL Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 ext.1710 Fax: 886-2-8797-1565 Email: [email protected]

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Power of Attorney Date: August 3, 2011 To whom it may concern: We, the undersigned PRIMAX ELECTRONICS LTD. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan Branch on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------- C.T. Huang Compliance Dept. / Director Phone: 886-2-2798-9008 ext.1710 Fax: 886-2-8797-1565 Email: [email protected]

Page: 1

LABEL LOCATION Label Location

1234567 1234567 A B C D E A B C D E PRIMAX ELECTRONICS LTD. 致伸資訊電子有限公司 USED FINISH SCALE TITLE DWG NO . FILE NAMESHEET REV. SIZE A4 DR. CHKD. APPD. UNIT mm 1 1 1 DO NOT SCALE DRAWING THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PRIMAX ELECTRONICS LTD. AND SHALL NOT BE REPRODUCED COPIED OR USED IN ANY MANNER WITHOUT THE PRIOR WRITTEN CONSENT OF PRIMAX ELECTRONICS LTD. DIMENSIONS 0.00 TO 30.00mm +0.10mm 30.01 TO 80.00mm +0.13mm 80.01 TO 150.00mm +0.15mm 150.01 +0.20mm TOLERANCE MATERIAL REV. DESCRIPTION ENG. APPROVAL UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS ANGULAR TOLERANCE:+1.0 2. TOL:-0.2/0mm. 3.THE DIMENSIONS MARKED WITH''*'' ARE IMPORTANT. 4.GLUE : T=0.022~0.025mm. 2 5.STICKINESS: 3.0kg/cm. 6. NOTE: 20-AFK03H102 Requirement of PRIMAX Green Part: 1. Comply with PRIMAX QW-5Q002 '' Green Product Chemical Substances Specification'' 2. Follow customer's specification as required. 80P合成紙+霧膜 BOTTOM LABEL 7. 304007825050 304007825050 Susan.Lee 2011/07/06 Ruby.Ai Ruby.Ai 3.Follow Halogen- Free requirement : Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm if required. P代表Primax 固定碼 YEAR(2010=0,2011=1....) WEEK(01,02,.....) 流水碼(0001~ZZZZ, 其中A,E,I,O,U不能使用),31進制 S/N: CN P Y WW XXXX 流水碼具體如下: 0001,0002,...0009,000B,000C,000D,000F,...000Z 0010,0011,.....0019,001B,001C,001D,001F...001Z 0020...009Z,00B0,00B1...00BB..00ZY,00ZZ,... 1000,1001,...1009,100B...100Z,1010,1011...9999, 999B,999C,....999Y,999Z,99B0,99B1...99ZZ...9ZZZ, B000......ZZZZ 1.印刷: 黑底, 字體顏色:877C,字體為Futura Bk(安規和中文除外),流水碼位置:銀底黑字 廠商的UL代碼 被貼底蓋材質:ABS 不固定碼 *42.5 * 6 7 N279 ® HP Wi-Fi Mobile Mouse HP 高速無線行動滑鼠 HP 高速无线移动鼠标 OFFON XX N N E C O T C HP Product Number : LQ083AA Model No.(型號/型号) : MOWFFKUL HP Spare Part No : 650375-001 Rating(額定電壓電流/额定电压电流) : 3V 100mA CLASS 1 LASER PRODUCT FCC ID : EMJMMOWFFKUL IC : 4251A-MMOWFFKUL Manufactured : MMMMYYYY Site : P Hewlett Packard Company 3000 Hanover Street, Palo Alto, CA 94304, U.S.A. Product of China(中國製造/中国制造) Rev. B Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Complies with IDA Standards DB100427 KCC-CRI-HPK-MOWFFKUL 1751-11-3596 HP Product Number: LY820AA Model Number: MOWFFQUL Rating(額定電壓電流/额定电压电流) : 3V 100mA CLASS 1 L ASER PRODUCT FCC ID : EMJMMOWFFQUL IC : 4251A-MMOWFFQUL S/N : CNPYWWXXXX 39.6 mm 2 4 . 9 m m

Page: 2 Page: 3 Page: 4 Page: 5 Page: 6 Page: 7

Report No: SA110708D13 1 Report Format Version 4.0.0 RF EXPOSURE REPORT REPORT NO.: SA110708D13 MODEL NO.: MOWFFQUL FCC ID: EMJMMOWFFQUL APPLICANT : PRIMAX ELECTRONICS LTD. ADDRESS : No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 5 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No: SA110708D13 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION..............................................................................................4 2. CONCLUSION.................................................................................................5 Report No: SA110708D13 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110708D13 Original release Jul. 26, 2011 Report No: SA110708D13 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: HP Wi-Fi ® Touch Mouse x7000 BRAND NAME: HP MODEL NO.: MOWFFQUL APPLICANT: PRIMAX ELECTRONICS LTD. TEST SAMPLE: ENGINEERING SAMPLE TESTED: Jul. 13 ~ 18, 2011 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: ( Jessica Cheng / Specialist ) APPROVED BY : , DATE: ( Ken Liu / Manager ) Report No: SA110708D13 5 Report Format Version 4.0.0 2. CONCLUSION No Evaluation Required if power is below this threshold: 2.4GHz F(GHz) mW Low 2412 High 2462 24.62 5.15GHz F(GHz) mW Low 5180 High 5240 11.52 5.7GHz F(GHz) mW Low 5745 High 5805 10.39 Maximum measured transmitter power: 2.4GHz Pout (dBm) Pout (mW) Conducted Power 6.7 4.7 EIRP Power 8.0 6.3 *Note: The antenna is Chip antenna with 1.30dBi gain Threshold for no SAR evaluation is 24.62mW Transmitter power is 6.3mW 5.15GHz Pout (dBm) Pout (mW) Conducted Power 3.2 2.1 EIRP Power 7.1 5.1 *Note: The antenna is Chip antenna with 3.85dBi gain Threshold for no SAR evaluation is 11.52mW Transmitter power is 5.1mW 5.7GHz Pout (dBm) Pout (mW) Conducted Power 1.4 1.4 EIRP Power 4.3 2.7 *Note: The antenna is Chip antenna with 2.85dBi gain Threshold for no SAR evaluation is 10.39mW Transmitter power is 2.7mW Conclusion: No SAR evaluation required since Transmitter Pout is below FCC threshold ---END---

Report No.: RF110708D13 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF110708D13 MODEL NO.: MOWFFQUL FCC ID: EMJMMOWFFQUL RECEIVED: Jul. 8, 2011 TESTED: Jul. 13 ~ 18, 2011 ISSUED: Jul. 26, 2011 APPLICANT: PRIMAX ELECTRONICS LTD. ADDRESS: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 72 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110708D13 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................5 1. CERTIFICATION..............................................................................................6 2. SUMMARY OF TEST RESULTS......................................................................7 2.1 MEASUREMENT UNCERTAINTY...................................................................7 3. GENERAL INFORMATION..............................................................................8 3.1 GENERAL DESCRIPTION OF EUT.................................................................8 3.2 DESCRIPTION OF TEST MODES.................................................................10 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST............................................10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS................................15 3.4 DESCRIPTION OF SUPPORT UNITS...........................................................15 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND).....................................16 4.1 CONDUCTED EMISSION MEASUREMENT.................................................16 4.2 RADIATED EMISSION MEASUREMENT......................................................16 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT....................................16 4.2.2 TEST INSTRUMENTS...................................................................................17 4.2.3 TEST PROCEDURES....................................................................................18 4.2.4 DEVIATION FROM TEST STANDARD..........................................................18 4.2.5 TEST SETUP.................................................................................................19 4.2.6 EUT OPERATING CONDITIONS...................................................................19 4.2.7 TEST RESULTS.............................................................................................20 4.3 6dB BANDWIDTH MEASUREMENT.............................................................27 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT...........................................27 4.3.2 TEST INSTRUMENTS...................................................................................27 4.3.3 TEST PROCEDURE......................................................................................27 4.3.4 DEVIATION FROM TEST STANDARD..........................................................27 4.3.5 TEST SETUP.................................................................................................28 4.3.6 EUT OPERATING CONDITIONS...................................................................28 4.3.7 TEST RESULTS.............................................................................................29 4.4 MAXIMUM OUTPUT POWER........................................................................31 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT.........................31 4.4.2 INSTRUMENTS.............................................................................................31 4.4.3 TEST PROCEDURES....................................................................................31 4.4.4 DEVIATION FROM TEST STANDARD..........................................................32 4.4.5 TEST SETUP.................................................................................................32 4.4.6 EUT OPERATING CONDITIONS...................................................................32 4.4.7 TEST RESULTS.............................................................................................33 Report No.: RF110708D13 3 Report Format Version 4.0.0 4.5 POWER SPECTRAL DENSITY MEASUREMENT.........................................34 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT......................34 4.5.2 TEST INSTRUMENTS...................................................................................34 4.5.3 TEST PROCEDURE......................................................................................34 4.5.4 DEVIATION FROM TEST STANDARD..........................................................35 4.5.5 TEST SETUP.................................................................................................35 4.5.6 EUT OPERATING CONDITION.....................................................................35 4.5.7 TEST RESULTS.............................................................................................36 4.6 BAND EDGES MEASUREMENT...................................................................38 4.6.1 LIMITS OF BAND EDGES MEASUREMENT................................................38 4.6.2 TEST INSTRUMENTS...................................................................................38 4.6.3 TEST PROCEDURE......................................................................................39 4.6.4 DEVIATION FROM TEST STANDARD..........................................................39 4.6.5 EUT OPERATING CONDITION............…

Text truncated - open the document above for the full version.

Report No.: RF110708D13-1 1 Report Format Version 4.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF110708D13-1 MODEL NO.: MOWFFQUL FCC ID: EMJMMOWFFQUL RECEIVED: Jul. 8, 2011 TESTED: Jul. 13 ~ 18, 2011 ISSUED: Jul. 26, 2011 APPLICANT: PRIMAX ELECTRONICS LTD. ADDRESS: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 42 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110708D13-1 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................4 1. CERTIFICATION............................................................................................5 2. SUMMARY OF TEST RESULTS....................................................................6 2.1 MEASUREMENT UNCERTAINTY..................................................................6 3. GENERAL INFORMATION.............................................................................7 3.1 GENERAL DESCRIPTION OF EUT...............................................................7 3.2 DESCRIPTION OF TEST MODES.................................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST............................................9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL...............10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS..............................12 3.4 DESCRIPTION OF SUPPORT UNITS.........................................................12 4. TEST TYPES AND RESULTS......................................................................13 4.1 CONDUCTED EMISSION MEASUREMENT...............................................13 4.2 RADIATED EMISSION MEASUREMENT....................................................13 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT..................................13 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS13 4.2.3 TEST INSTRUMENTS.................................................................................14 4.2.4 TEST PROCEDURES..................................................................................15 4.2.5 DEVIATION FROM TEST STANDARD........................................................15 4.2.6 TEST SETUP...............................................................................................16 4.2.7 EUT OPERATING CONDITION...................................................................16 4.2.8 TEST RESULTS...........................................................................................17 4.3 MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT.................21 4.3.1 LIMITS OF MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT21 4.3.2 TEST INSTRUMENTS.................................................................................21 4.3.3 TEST PROCEDURE....................................................................................22 4.3.4 DEVIATION FROM TEST STANDARD........................................................22 4.3.5 TEST SETUP...............................................................................................22 4.3.6 EUT OPERATING CONDITIONS.................................................................22 4.3.7 TEST RESULTS...........................................................................................23 4.4 PEAK POWER EXCURSION MEASUREMENT..........................................24 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT........................24 4.4.2 TEST INSTRUMENTS.................................................................................24 4.4.3 TEST PROCEDURE....................................................................................24 4.4.4 DEVIATION FROM TEST STANDARD........................................................25 4.4.5 TEST SETUP...............................................................................................25 4.4.6 EUT OPERATING CONDITIONS.................................................................25 4.4.7 TEST RESULTS...........................................................................................26 4.5 PEAK POWER SPECTRAL DENSITY MEASUREMENT............................28 4.5.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT..........28 4.5.2 TEST INSTRUMENTS.................................................................................28 4.5.3 TEST PROCEDURES..................................................................................28 4.5.4 DEVIATION FROM TEST STANDARD........................................................29 4.5.5 TEST SETUP...............................................................................................29 Report No.: RF110708D13-1 3 Report Format Version 4.0.0 4.5.6 EUT OPERATING CONDITIONS.................................................................29 4.5.7 TEST RESULTS...........................................................................................30 4.6 FREQUENCY STABILITY............................................................................31 4.6.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT.............................31 4.6.2 TEST INSTRUMENTS.................................................................................31 4.6.3 TEST PROCEDURE....................................................................................31 4.6.4 DEVIATION FROM TEST STANDARD........................................................32 4.6.5 TEST SETUP...............................................................................................32 4.6.6 EUT OPE…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST