FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Primax Electronics Ltd/
  3. EMJMTPA-P006M

EMJMTPA-P006MBluetooth Mouse

Primax Electronics Ltd
Bluetooth Mouse - FCC ID EMJMTPA-P006M - Primax Electronics Ltd
Click to zoom

Application Details

Equipment Class
DTS - Digital Transmission System
Date of Grant
May 16, 2023
Application Purpose
Original Equipment
Date of Application
May 16, 2023
Equipment Note
Bluetooth Mouse
Frequency Range
2402.00000000 - 2480.00000000
Company
Primax Electronics Ltd
Country
Taiwan

Documents & Files

Select a file to view

Users Manual

↗

Attestation Statements

↗
↗

Cover Letter(s)

↗
↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗
↗

Test Setup Photos

↗
↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Regulatory Notices This document provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for your product. Some of these notices may not apply to your product. 이 문서에는 국가 및 지역별 유무선 규제사항 설명과 제품의 준수 정보가 있습니다. 이러한 정보 중 일부는 귀하의 제품에 적용되지 않을 수 있습니다. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, write to HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 email [email protected], or call HP at 650-857-1501. To identify your product, refer to the part, series, or model number located on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC/Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation of devices with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the user guides included with your device. During normal operation of devices with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the device display is closed. To identify the location of the wireless antennas, refer to the user guides included with your device. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. FCC/Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your device. Aviso para o Brasil Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth® capability, the device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Avis Canadien Ce dispositif numérique de Classe B répond aux exigences de la réglementation du Canada relative aux équipements causant des interférences CAN ICES-3(B)/ NMB-3(B). Si ce dispositif est doté de fonctionnalités de réseau sans fil ou Bluetooth, il est conforme aux normes d'exemption de licence RSS d'Industrie Canada. Son fonctionnement est assujetti aux deux conditions suivantes : 1) Ce dispositif ne doit causer aucune interférence dangereuse, et 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement indésirable. Radiation Exposure Statement This product complies with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user's body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations Le produit est conforme aux limites d'exposition pour les appareils portables RF …

Text truncated - open the document above for the full version.

Attestation Statements

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Date: 2023-04-16 FCC ID:EMJMTPA-P006M To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing PRIMAX ELECTRONICS LTD. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing PRIMAX ELECTRONICS LTD. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ------------------------------------------------------------------- Nelson Chou Compliance Dept. / Manager PRIMAX ELECTRONICS LTD. TEL: 886-2-2798-9008 ext. 1681 FAX:886-2-8797-1565 Email: [email protected]

Cover Letter(s)

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 886-2-2798-9008 Fax: 886-2-8798-1565 Date: 2023/4/16 FCC ID:EMJMTPA-P006M To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------------------- Nelson Chou Compliance Dept. / Manager PRIMAX ELECTRONICS LTD. TEL: 886-2-2798-9008 ext. 1681 FAX:886-2-8797-1565 Email: [email protected]

Cover Letter(s)

No. 669, Ruey Kuang Road Neihu Taipei, Taiwan, R.O.C. Tel: 883-2-2798-9008 Fax: 886-2-8798-1565 Date: 2023-04-16 FCC ID:EMJMTPA-P006M A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned, hereby authorize Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CP S Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ------------------------------------------------------------------- Nelson Chou Compliance Dept. / Manager PRIMAX ELECTRONICS LTD. TEL: 886-2-2798-9008 ext. 1681 FAX:886-2-8797-1565 Email: [email protected]

External Photos

Reference No.:BDKX-WTW-P23040103_ExtPho Page 1/3 CONSTRUCTION PHOTOS OF EUT Reference No.:BDKX-WTW-P23040103_ExtPho Page 2/3 Reference No.:BDKX-WTW-P23040103_ExtPho Page 3/3

Internal Photos

Reference No.:BDKX-WTW-P23040103_IntPho Page 1/5 CONSTRUCTION PHOTOS OF EUT Reference No.:BDKX-WTW-P23040103_IntPho Page 2/5 Reference No.:BDKX-WTW-P23040103_IntPho Page 3/5 Antenn a Reference No.:BDKX-WTW-P23040103_IntPho Page 4/5 Reference No.:BDKX-WTW-P23040103_IntPho Page 5/5

RF Exposure Info

Report No.: MFBDKX-WTW-P23040103 Page No. 1 / 7 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P23040103 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1093) Report No.: MFBDKX-WTW-P23040103 FCC ID: EMJMTPA-P006M Product: Bluetooth Mouse Brand: hp Model No.: TPA-P006M Received Date: 2023/4/10 Test Date: 2023/4/18 Issued Date: 2023/5/10 Applicant: PRIMAX ELECTRONICS LTD. Address: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 Approved by: , Date: 2023/5/10 Jeremy Lin / Project Engineer This test report consists of 7 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Annie Chang / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBDKX-WTW-P23040103 Page No. 2 / 7 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P23040103 Table of Contents Release Control Record ....................................................................................................................................................... 3 1 Certificate .................................................................................................................................................................... 4 2 Applicable RF Exposure Limit .................................................................................................................................. 5 3 Test Results ................................................................................................................................................................ 6 3.1 RF Exposure ............................................................................................................................................................. 6 4 Conclusion .................................................................................................................................................................. 6 5 Information of the Testing Laboratories .................................................................................................................. 7 Report No.: MFBDKX-WTW-P23040103 Page No. 3 / 7 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P23040103 Release Control Record Issue No. Description Date Issued MFBDKX-WTW-P23040103 Original release. 2023/5/10 Report No.: MFBDKX-WTW-P23040103 Page No. 4 / 7 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P23040103 1 Certificate Product: Bluetooth Mouse Brand: hp Test Model: TPA-P006M Sample Status: Engineering sample Applicant: PRIMAX ELECTRONICS LTD. Test Date: 2023/4/18 FCC Rule Part: FCC Part 2 (Section 2.1093) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBDKX-WTW-P23040103 Page No. 5 / 7 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P23040103 2 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatialaverage SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists,…

Text truncated - open the document above for the full version.

Test Report

Report No.: AGBDKX-WTW-P23040103 Page No. 1 / 9 Report Format Version:6.1.2 Antenna Gain Measurement Report Report No.: AGBDBO-WTW-P23040103 Brand: PSA Model No.: RFANT2012090A0T Received Date: 2023/4/10 Test Date: 2023/4/17 Issued Date: 2023/5/10 Applicant: PRIMAX ELECTRONICS LTD. Address: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 Prepared by : , Date: 2023/5/10 Annie Chang / Senior Specialist Approved by : , Date: 2023/5/10 Jeremy Lin / Project Engineer This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: AGBDKX-WTW-P23040103 Page No. 2 / 9 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................... 3 1 EUT Antenna System Description ........................................................................................................ 4 1.1 Antenna Information.............................................................................................................................. 4 1.2 Antenna Location .................................................................................................................................. 4 2 2D Antenna Pattern Measurement ....................................................................................................... 5 2.1 Test Location ......................................................................................................................................... 5 2.2 Test Measurement procedure ............................................................................................................... 5 2.3 Test Setup Diagram @ Fully Anechoic Chamber ................................................................................. 5 2.4 Test Setup Diagram for EUT ................................................................................................................. 6 2.5 Test Instruments .................................................................................................................................... 6 2.6 Measurement Uncertainty ..................................................................................................................... 6 2.7 Test Procedure ...................................................................................................................................... 7 2.8 Test Result ............................................................................................................................................ 7 2.9 2D Pattern Test Plots ............................................................................................................................ 8 3 Appendix - Information of the Testing Laboratories .............................................................................. 9 Report No.: AGBDKX-WTW-P23040103 Page No. 3 / 9 Report Format Version:6.1.2 Release Control Record Issue No. Description Date Issued AGBDBO-WTW-P23040103 Original release. 2023/5/10 Report No.: AGBDKX-WTW-P23040103 Page No. 4 / 9 Report Format Version:6.1.2 1 EUT Antenna System Description 1.1 Antenna Information Frequency Range (GHz) Antenna Type Connector Type 2.4 ~ 2.4835 Chip None Frequency (MHz) Max Gain (dBi) 2402 0.57 2440 1.27 2480 1.97 1.2 Antenna Location Please refer to the attached file (Test Setup Photo) Report No.: AGBDKX-WTW-P23040103 Page No. 5 / 9 Report Format Version:6.1.2 2 2D Antenna Pattern Measurement 2.1 Test Location 2D antenna pattern measurement in Fully Anechoic Chamber 2.2 Test Measurement procedure CISPR 16-1-6 ANSI 63.10-2013 clause 13 KDB 412172 D01 Determining ERP and EIRP v01r01 2.3 Test Setup Diagram @ Fully Anechoic Chamber The 2D antenna pattern measurement is using the test system (refer to Figure 1). The EUT is positioned on center of turntable, for Free Space only in fully anechoic chamber. Data (Raw Value) is recorded using the spectrum analyzer at each position. Figure 1. 2D antenna pattern test system. Report No.: AGBDKX-WTW-P23040103 Page No. 6 / 9 Report Format Version:6.1.2 2.4 Test Setup Diagra…

Text truncated - open the document above for the full version.

Test Report

Report No.: RFBDKX-WTW-P23040103 Page No. 1 / 30 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P23040103 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBDKX-WTW-P23040103 FCC ID: EMJMTPA-P006M Product: Bluetooth Mouse Brand: hp Model No.: TPA-P006M Received Date: 2023/4/10 Test Date: 2023/4/14 ~ 2023/4/18 Issued Date: 2023/5/10 Applicant: PRIMAX ELECTRONICS LTD. Address: No. 669, Ruey Kuang Road, Neihu, Taipei, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 Approved by: , Date: 2023/5/10 Jeremy Lin / Project Engineer This test report consists of 30 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Annie Chang / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBDKX-WTW-P23040103 Page No. 2 / 30 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P23040103 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 7 3.3 Channel List .............................................................................................................................................................. 7 3.4 Test Mode Applicability and Tested Channel Detail .................................................................................................. 8 3.5 Duty Cycle of Test Signal .......................................................................................................................................... 8 3.6 Test Program Used and Operation Descriptions ...................................................................................................... 9 3.7 Connection Diagram of EUT and Peripheral Devices .............................................................................................. 9 4 Test Instruments ...................................................................................................................................................... 10 4.1 RF Output Power .................................................................................................................................................... 10 4.2 Power Spectral Density .......................................................................................................................................... 10 4.3 6 dB Bandwidth ...................................................................................................................................................... 10 4.4 Conducted Out of Band Emissions ............................................…

Text truncated - open the document above for the full version.

Test Setup Photos

Reference No.:AGBDKX-WTW-P23040103-TSup Page 1/2 PHOTOGRAPHS OF THE TEST CONFIGURATION Antenna Location Y X Z Reference No.:AGBDKX-WTW-P23040103-TSup Page 2/2 Test Setup

Test Setup Photos

Reference No.:RFBDKX-WTW-P23040103-TSup Page 1/2 PHOTOGRAPHS OF THE TEST CONFIGURATION Unwanted Emissions below 1 GHz Reference No.:RFBDKX-WTW-P23040103-TSup Page 2/2 Unwanted Emissions above 1 GHz

Contact Information

Applicant

Nelson Chou(Manager)
[email protected]+886-2-2798-1681Fax: +886-2-8797-1565

Test Firm

Bureau Veritas CPS(H.K.) Ltd., Taoyuan BranchLiu Ken
[email protected]+886-3-2600609Fax: +886-3-2115834

Technical Specifications

#Rule PartsFrequency RangePower Output
115C2.40 GHz - 2.48 GHz2.00 mW
Confidentiality
Long Term
Grant Notes
Power listed is maximum conducted output power.

Other Applications from Primax Electronics Ltd

EMJ-BHS2705

Wireless Headset

Aug 28, 2026

Equipment Class

DTS - Digital Transmission System
EMJMMOBTN5O

wegear MW1 Creator Mouse

Aug 22, 2024

Equipment Class

DTS - Digital Transmission System
EMJDDGRFN5

wegear MW1 2.4G Dongle

Aug 22, 2024

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter
Dongle - FCC ID EMJDTPA-P002D - Primax Electronics Ltd
EMJDTPA-P002D

Dongle

Jan 14, 2024

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter
Level Bridge - FCC ID EMJOH1 - Primax Electronics Ltd
EMJOH1

Level Bridge

Oct 29, 2023

Equipment Class

DTS - Digital Transmission System