EROM20221500110.1 in. Wireless Touch Screen

TST-1080 10.1 in. Wireless Touch Screen Installation Guide Crestron Electronics, Inc. The original language version of this document is U.S. English. All other languages are a translation of the original document. Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_agreement. The product warranty can be found at www.crestron.com/warranty. The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents. Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource. Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. ©2023 Crestron Electronics, Inc. Installation Guide — Doc. 9338A Contents • iii Contents TST-1080 Installation (with TST-1080-DSW) ..........................................4 In the Box (TST-1080-DSW) ........................................................................................... 4 Install the Mounting Hardware ......................................................................................... 4 Install the TST-1080-DSW............................................................................................... 5 Dock the Touch Screen ................................................................................................... 9 Undock the Touch Screen ............................................................................................. 10 iv • Contents Installation Guide — Doc. 9338A TST-1080 Installation (with TST-1080-DSW) Use the following procedures to install the TST-1080 touch screen with the TST-1080-DSW. NOTE: The TST-1080-DSW wall dock is designed for flush-mount installation in a flat, vertical wall structure. Installation of the wall dock requires additional mounting hardware (not included): • The TST-902-DSW-BB and TST-902-DSW-BBI back boxes are available for both framed and masonry construction. • The TST-902-DSW-PMK, TST-902-DSW-WMKM, and TST-902-DSW-WMKT mounting kits are available for preconstruction and postconstruction applications that do not require a back box. In the Box (TST-1080-DSW) Qty. Description 1 TST-1080-DSW, Wall Dock for TST-1080 Additional Items 1 Connector, 2-Pin (2003574) 4 Screw, 6-32 x 1-1/2 in., Flat Head, Phillips (2031703) 4 Plug, 0.35 x 0.50 in., Black (2042641) 4 Screw, 6-32 x 1 in., Flat Head, Phillips, Black (2060660) 1 Key, Release Lock (4522222) Install the Mounting Hardware One of the available TST-1080-DSW mounting accessories (not included) must be installed prior to installing the TST-1080-DSW. Refer to the following installation procedures depending on the chosen mounting hardware: NOTE: Ensure the chosen mounting location allows for an air gap of at least 12 in. (305 mm) in the wall cavity above and below the TST-1080-DSW for heat dissipation. • For preconstruction applications where a back box will be fastened to the left or right-hand stud of a framed wall prior to drywall installation, refer to TST-902-DSW-BB Installation . • For preconstruction applications where mounting hardware (without a back box) will be fastened to the left or right-hand stud of a framed wall prior to drywall installation, refer to TST-902-DSW-PMK Installation. • For postconstruction applications where a back box will be installed into masonry or concrete, refer to TST-902-DSW-BBI Installation . Installation Guide — Doc. 9338A Contents • v • For postconstruction applications where mounting hardware will be installed in an existing framed wall or similar flat surface using a mud ring, refer to TST-902-DSW-WMKM Installation . • For postconstruction applications where mounting hardware will be installed in an existing framed wall or similar flat surface using a trim ring, refer to TST-902-DSW-WMKT Installation . Install the TST-1080-DSW The following procedure assumes that the a TST-1080-DSW mounting accessory has been installed completely as described in Install the Mounting Hardware (on page 4). For preconstruction mounting hardware, it is also assumed that drywall is in place and a cutout for the TST-1080-DSW has been made. To install the TST-1080-DSW wall dock: 1. Route the wiring for the TST-1080-DSW power connection through the rear of the mounting hardware. NOTE: The maximum wire size for the power connection is 18 AWG. 2. While holding the TST-1080-DSW, connect the flying leads from the wiring to the 2-pin power connector (24 G) on the rear of the TST-1080-DSW. 3. Attach the TST-1080-DSW to the mounting hardware using the four 6-32 x 1-1/2 in. screws. The following illustration shows the TST-1080-DSW being attached to the TST-902-DSW-BB back box as an example. NOTE: The cradle for the touch screen on the TST-1080-DSW should be in the closed position during installation. vi • Contents Installation Guide — Doc. 9338A 4. While holding the included bezel, connect the small plug attached to the thin cable on the TST-1080-DSW to the connector located behind the release button on the right of the bezel. Refer to the illustration below step 7. Installation Guide — Doc. 9338A Contents • vii NOTE: If the bezel must be removed for any reason, disconnect this cable carefully prior to removal. 5. Attach the bezel to the TST-1080-DSW …

Text truncated - open the document above for the full version.

TST-1080 10.1in.WirelessTouchScreen ProductInformation-9336CO (2060081) 06.23 GettingStarted ScantheQRcodeforproductdocumentation. TheoriginallanguageversionofthisdocumentisU.S.English. Allotherlanguagesareatranslationoftheoriginaldocument. CertificationandCompliance RegulatoryModel:M202215001 FederalCommunicationsCommission(FCC)ComplianceStatement Thisdevicecomplieswithpart15oftheFCCRules.Operationis subjecttothefollowingconditions: (1)Thisdevicemaynotcauseharmfulinterferenceand(2)thisdevice mustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation. CAUTION:Changesormodificationsnotexpresslyapprovedbythe manufacturerresponsibleforcompliancecouldvoidtheuser’s authoritytooperatetheequipment. NOTE: Thisequipmenthasbeentestedandfoundtocomplywiththe limitsforaClassBdigitaldevice,pursuanttopart15oftheFCC Rules.Theselimitsaredesignedtoprovidereasonableprotection againstharmfulinterferenceinaresidentialinstallation.This equipmentgenerates,usesandcanradiateradiofrequencyenergy and,ifnotinstalledandusedinaccordancewiththeinstructions, maycauseharmfulinterferencetoradiocommunications.However, thereisnoguaranteethatinterferencewillnotoccurinaparticular installation.Ifthisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,whichcanbedeterminedbyturningthe equipmentoffandon,theuserisencouragedtotrytocorrectthe interferencebyoneormoreofthefollowingmeasures: l Reorientorrelocatethereceivingantenna. l Increasetheseparationbetweentheequipmentandreceiver. l Connecttheequipmentintoanoutletonacircuitdifferentfrom thattowhichthereceiverisconnected. l Consultthedealeroranexperiencedradio/TVtechnicianforhelp. FCCregulationsrestricttheoperationofthisdevicetoindooruse only. ThisproductcomplieswiththeFCCportableRFexposurelimitset forthforanuncontrolledenvironmentandissafeforintended operationasdescribedintheproductdocumentation.FurtherRF exposurereductioncanbeachievediftheproductiskeptasfaras possiblefromtheuserorissettoitslowestoutputpowersettings(if thisfunctionisavailable). NOTE: Thecountrycodeselectionisavailablefornon-USmodels only.PerFCCregulations,allWi-Fi®communicationsproducts marketedintheUSmustbefixedtoUSoperationchannelsonly. Thisproductisprohibitedfromcontrollingorcommunicatingwith unmannedaircraftsystems,includingdrones. IndustryCanada(IC)ComplianceStatement CANICES-3(B)/NMB-3(B) ISEDCanada:Thisdevicecontainslicence-exempttransmitter (s)/receiver(s)thatcomplywithInnovation,ScienceandEconomic DevelopmentCanada’slicence-exemptRSS(s).Operationissubject tothefollowingtwoconditions:1.Thisdevicemaynotcause interference.2.Thisdevicemustacceptanyinterference,including interferencethatmaycauseundesiredoperationofthedevice. L’émetteur/récepteurexemptdelicencecontenudansleprésent appareilestconformeauxCNRd’Innovation,Scienceset DéveloppementéconomiqueCanadaapplicablesauxappareilsradio exemptsdelicence.L’exploitationestautoriséeauxdeuxconditions suivantes:1.L’appareilnedoitpasproduiredebrouillage;2. L’appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesi lebrouillageestsusceptibled’encompromettrelefonctionnement. ThisproductcomplieswiththeCanadaportableRFexposurelimit setforthforanuncontrolledenvironmentandissafeforintended operationasdescribedintheproductdocumentation.FurtherRF exposurereductioncanbeachievediftheproductiskeptasfaras possiblefromtheuserorissettoitslowestoutputpowersettings(if thisfunctionisavailable). Ceproduitestconformeàlalimited'expositionRFportabledu Canadaétabliepourunenvironnementnoncontrôléetestsans dangerpourlefonctionnementprévutelquedécritdansla documentationduproduit.Uneréductionsupplémentairede l'expositionRFpeutêtreobtenuesileproduitestmaintenuaussiloin quepossibledel'utilisateurouestréglésursesparamètresde puissancedesortielesplusbas(sicettefonctionestdisponible). Thedeviceoperationintheband5150-5250MHzisforindooruse onlytoreducethepotentialforharmfulinterferencetoco-channel mobilesatellitesystems. Lefonctionnementdel'appareildanslabande5150-5250MHzest destinéàuneutilisationenintérieuruniquementafinderéduirele potentield'interférencesnuisiblesauxsystèmesdesatellitesmobiles co-canaux. Thedevicemaycontainradioscapableoftransmittinginthe5150– 5350MHzfrequencyrange(suchas5GWi-Finetworks).This frequencyisrestrictedtoindooruseonly. PRELIMINARY Thisproductisprohibitedfromcontrollingorcommunicatingwith unmannedaircraftsystems,includingdrones. Ilestinterditàceproduitdecontrôleroudecommuniqueravecles systèmesd'aéronefssanspilote,ycomprislesdrones. CrestronElectronics,Inc. 15VolvoDrive,Rockleigh,NJ07647 Tel:888.CRESTRON Fax:201.767.7656 www.crestron.com ProductInformation-Doc.9336CO (2060081) 06/07/23 CrestronElectronics,Inc.declaresthattheradioequipmenttype M202215001isincompliancewithDirective2014/53/EUandUK RadioEquipmentRegulations2017SI2017/1206.Thefulltextofthe EUdeclarationofconformityisavailableatthefollowinginternet address:support.crestron.com/app/certificates. ThefrequencyandmaximumtransferredpowerintheEU isprovided below. FrequencyMax.TransmittedPower 2402–2480 MHz 9.82dBm(BT/EDR) 2402–2480 MHz 9.79dBm(BTLE) 2412–2472 MHz 19.75dBm 5180–5240 MHz 21.42dBm 5725–5850 MHz 13.84dBm 5925–6425 MHz 13.97dBm Asofthedateofmanufacture,theproducthasbeentestedand foundtocomplywithspecificationsforCEmarking. TheWasteElectrical&ElectronicEquipment(WEEE)directive markingonaproductindicatesthatitshouldnotbedisposedofwith generalwaste.Instead,youareencouragedtoreuseorrecyclethe productinaccordancewithDirective2012/19/EUoftheEuropean Union.Properdisposalofthisproductwillhelppreventpotential negativeeffectsontheenvironmentandhumanhealth,whichcould otherwisebecausedbyinappropriatewastehandling.Penaltiesmay beapplicableforincorrectdisposalofthiswaste,inaccordancewith yournationallegislation.Forinformationaboutrecyclingthis product,pleasecontactyourhouseholdwastedisposalservice,your originaldistributor,orCrestron. Legal Theproductwarrantycanbefoundatwww.crestron.com/warranty. ThespecificpatentsthatcoverCrestronproductsarelistedonlineat www.crestron.com/…

Text truncated - open the document above for the full version.

Crestron Electronics Inc 15 Volvo Drive Rockleigh New Jersey 07647 United States TEL: 201-367-6796 FAX: 201-767-1903 Date: 2023-05-27 FCC ID: EROM202215001 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Crestron Electronics Inc certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Crestron Electronics Inc certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Chirag Patel, Lead Compliance Engineer Crestron Electronics Inc Tel: 201-367-6796 Ext: 12456 Fax: 201 767 1903 E-mail: [email protected]

Crestron Electronics Inc 15 Volvo Drive Rockleigh New Jersey 07647 United States TEL: 201-750-7004 FAX: 201-767-5771 U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: Crestron Electronics Inc FRN: 0005022819 Grantee Code or FCC ID: ERO Contact Name: Gary Freed Street Address: 15 Volvo Drive Rockleigh City/Province/Zip: New Jersey 07647 United States Telephone No: 201-750-7004 Ext: 12305 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: 2023-06-07 Signed by (printed name): Gary Freed

Crestron Electronics Inc 15 Volvo Drive Rockleigh New Jersey 07647 United States TEL: 201-367-6796 FAX: 201-767-1903 Date: 2023-05-27 FCC ID: EROM202215001 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Chirag Patel, Lead Compliance Engineer Crestron Electronics Inc Tel: 201-367-6796 Ext: 12456 Fax: 201 767 1903 E-mail: [email protected]

Crestron Electronics Inc 15 Volvo Drive Rockleigh New Jersey 07647 United States TEL: 201-367-6796 FAX: 201-767-1903 Date: 2023-05-27 FCC ID: EROM202215001 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Chirag Patel, Lead Compliance Engineer Crestron Electronics Inc Tel: 201-367-6796 Ext: 12456 Fax: 201 767 1903 E-mail: [email protected]

Crestron Electronics Inc 15 Volvo Drive Rockleigh New Jersey 07647 United States TEL: 201-367-6796 FAX: 201-767-1903 Date: 2023-05-27 FCC ID: EROM202215001 AUTHORIZATION LETTER To Whom It May Concern: Crestron Electronics Inc hereby authorizes Emerald Chen / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Emerald Chen / Specialist of BV CPS Taoyuan on Crestron Electronics Inc’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Chirag Patel, Lead Compliance Engineer Crestron Electronics Inc Tel: 201-367-6796 Ext: 12456 Fax: 201 767 1903 E-mail: [email protected]

Reference No.:BEZH-WTW-P23010321_ExtPho Page 1/8 CONSTRUCTION PHOTOS OF EUT Reference No.:BEZH-WTW-P23010321_ExtPho Page 2/8 Reference No.:BEZH-WTW-P23010321_ExtPho Page 3/8 Reference No.:BEZH-WTW-P23010321_ExtPho Page 4/8 Reference No.:BEZH-WTW-P23010321_ExtPho Page 5/8 Reference No.:BEZH-WTW-P23010321_ExtPho Page 6/8 Reference No.:BEZH-WTW-P23010321_ExtPho Page 7/8 Reference No.:BEZH-WTW-P23010321_ExtPho Page 8/8

Reference No.:BEZH-WTW-P23010321_IntPho Page 1/10 CONSTRUCTION PHOTOS OF EUT Reference No.:BEZH-WTW-P23010321_IntPho Page 2/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 3/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 4/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 5/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 6/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 7/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 8/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 9/10 Reference No.:BEZH-WTW-P23010321_IntPho Page 10/10

SAR and Power Density Test Report Report Format Version 5.0.0 Page No. : 1 of 34 Report No. : SFBEZH-WTW-P23010321 Issued Date : May 29, 2023 SAR and Power Density Test Report Report No. : SFBEZH-WTW-P23010321 Applicant : Crestron Electronics, Inc. Address : 15 Volvo Drive, Rockleigh, NJ 07647 Product : 10.1 in. Wireless Touch Screen FCC ID : EROM202215001 Brand : Crestron Electronics, Inc. Model No. : M202215001, TST-1080 (refer to section 2 for more details) FCC Rule Part : CFR §2.1093 Standards : IEC/IEEE 62209-1528:2020, IEC TR 63170:2018, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06 , KDB 616217 D04 v01r02 Sample Received Date : Feb. 22, 2023 Date of Testing : May 05, 2023 ~ May 08, 2023 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR and Power Density Test Report Report Format Version 5.0.0 Page No. : 2 of 34 Report No. : SFBEZH-WTW-P23010321 Issued Date : May 29, 2023 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR and Power Density Value ...................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 8 3.2.5 Device Holder ..................................................................................................................................................... 9 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Power Source ................................................................................................................................................... 10 3.2.8 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4…

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFBEZH-WTW-P23010321 Plots of System Verification Measurement Report S01 System Check 2450_230505 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, n/a x n/a x n/a SN: 737 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 2450.0, 0 8.15 1.85 38.8 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date ELI V8.0 (20deg probe tilt) - 2188 H06T27N9 , 2023-May-05 EX3DV4 - SN7696, 2023-01-25 DAE3 Sn579, 2022-06-01 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-05-05 2023-05-05 psSAR1g [W/kg] 2.45 2.46 psSAR10g [W/kg] 1.16 1.15 Power Drift [dB] -0.02 0.01 M2/M1 [%] 78.3 Dist 3dB Peak [mm] 9.1 Report No.: SFBEZH-WTW-P23010321 Plots of System Verification Measurement Report S02 System Check 5250_230505 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, n/a x n/a x n/a SN: 1019 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 5250.0, 0 6.01 4.57 35.9 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date ELI V8.0 (20deg probe tilt) - 2188 H51T72N9 , 2023-May-05 EX3DV4 - SN7696, 2023-01-25 DAE3 Sn579, 2022-06-01 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-05-05 2023-05-05 psSAR1g [W/kg] 3.11 3.63 psSAR10g [W/kg] 0.986 1.04 Power Drift [dB] 0.01 -0.01 M2/M1 [%] 64.6 Dist 3dB Peak [mm] 7.3 Report No.: SFBEZH-WTW-P23010321 Plots of System Verification Measurement Report S03 System Check 5800_230505 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, n/a x n/a x n/a SN: 1019 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 5800.0, 0 5.1 5.16 35.0 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date ELI V8.0 (20deg probe tilt) - 2188 H51T72N9 , 2023-May-05 EX3DV4 - SN7696, 2023-01-25 DAE3 Sn579, 2022-06-01 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-05-05 2023-05-05 psSAR1g [W/kg] 3.37 3.87 psSAR10g [W/kg] 1.04 1.12 Power Drift [dB] 0.01 -0.01 M2/M1 [%] 58.3 Dist 3dB Peak [mm] 7.6 Report No.: SFBEZH-WTW-P23010321 Plots of System Verification Measurement Report S04 System Check 2450_230505 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole, n/a x n/a x n/a SN: 737 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 2450.0, 0 8.15 1.85 38.8 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date ELI V8.0 (20deg probe tilt) - 2188 H06T27N9 , 2023-May-05 EX3DV4 - SN7696, 2023-01-25 DAE3 Sn579, 2022-06-01 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-05-05 2023-05-05 psSAR1g [W/kg] 2.45 2.46 psSAR10g [W/kg] 1.16 1.15 Power Drift [dB] -0.02 0.01 M2/M1 [%] 78.3 Dist 3dB Peak [mm] 9.1 Report No.: SFBEZH-WTW-P23010321 Plots of System Verification Measurement Report S05 System Check_H6.5GHz_230505 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 50.0 x 10.0 x 8.0 SN: 1008 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, HSL 6500 5.65 5.95 33.9 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date ELI V8.0 (20deg probe tilt) - 2188 H51T72N9 , 2023-May-05 EX3DV4 - SN7696, 2023-01-25 DAE3 Sn579, 2022-06-01 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 7.5 x 7.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-05-05 2023-05-05 psSAR1g [W/kg] 25.0 28.6 psSAR10g [W/kg] 4.93 5.29 psAPD (1.0cm2, sq) [W/m2] 286 psAPD (4.0cm2, sq) [W/m2] 132 Power Drift [dB] -0.11 -0.01 Report No.: SFBEZH-WTW-P23010321 Plots of System Verification Measurement Report S05 PD_System Check_10 GHz_2023.05.08 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type SPEAG, 5G Verification Source 10 GHz 100.0 x 100.0 x 170.0 SN: 1025 Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air FRONT, 10.00 Validation band CW, -0- 10000.0, 10000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1029 ---Air EUmmWV4 - SN9438_F1-55GHz, 2022-07-18 DAE4 Sn1590, 2022-09-22 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.125 x 0.125 Sensor Surface [mm] 10.0 Measurement Results 5G Scan Date 2023-05-08 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 55.9 psPDtot+ [W/m 2 ] 56.1 psPDmod+ [W/m 2 ] 56.4 E max [V/m] 151 Power Drift [dB] -0.01 Report No.: SFBEZH-WTW-P23010321 Plots of Measurement Appendix B. P…

Text truncated - open the document above for the full version.