GCD-SA-33GRemote control

SA-33 Installation Instructions Wireless 5-Button Remote Control 1 0706-0960345+00 1. General Description The SA-33 is a handheld 5-button remote control that works with existing wireless panels and expansions. 1.1. Standard Features • Four function buttons: arm away, arm home, disarm, and status • Large, recessed shield-shaped Panic button in the middle of the device • Small, thin, and oval design • Handy design – easy to reach all the buttons with one finger • Sealed and waterproof • Coin battery with life expectancy of three years • Simple battery replacement 2. Technical Specifications 2.1. Electrical Characteristics Battery: CR2450 Lifetime: At least three years Compliance: CE, FCC Standby Current: <1uA Transmission Current: 15mA Transmission Sign: 2 SMD LED 2.2. Environmental Characteristics Operating Temperature: -10°C to +60°C (+14°F to +140°F) Operating Humidity: Up to 95% non-condensing 2.3. RF Characteristics: RF Frequency: H - 868.35MHz G - 433.92MHz RF Power Output: 6dBm Range: Up to 80 m in open space 2.4. Physical Characteristics Dimensions: 57.9 x 41 x 13.8 mm (2.28 x 1.6 x 0.54 inch) Shape: Oval Weight: 22 g (0.77 oz) including battery Colors: Black with black keys Silver with dark gray keys White with light gray keys 3. Operating Instructions The SA-33 remote control is activated by pressing the buttons on the unit, and transmitting this information to the receiver panel. As the SA-33 is a portable, wireless device, system reception is dependent upon the conditions of use, as follows. Caution: AVOID using near or behind large metal surfaces and multiple concrete/steel walls. This may interfere or block the wireless signals. Make sure to test the range from the desired location by using the RF Test Procedure to ensure reception. Caution: AVOID placing the SA-33 near strong magnetic or electrical fields other than the magnet with which it is intended to be used. Otherwise, performance can be affected, and false alarms can occur. Important Note: When the detector range is decreased as a result of depleted battery power, replace the battery with the same type of battery immediately. 3.1. Registration Before using the SA33 transmission information, it should be directed to the relevant panel. Please refer to the Panel manual for more information on the registration process. The device group consist of remotes, and the information is transferred by pressing one of the keys. 3.2. Using the Remote Control The SA-33 has five buttons. Use the buttons to operate the remote control, as described in the table below. Button Description Arm Away Arm Home Disarm  Status Panic Button CAUTION: Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Rosslare Ltd.) could void the user’s authority to operate the equipment. 4. Replacing the Battery To replace the batteries when needed, follow the procedure below: 1. Use a Phillips head screw driver to loosen the screw on the battery cover (see Figure 1), located on the bottom side of the remote control. 2. Replace the battery with the same type of battery, with the positive (+) side facing up. 3. Close the battery cover, and tighten the screw using the screw driver. 4. Dispose of the old battery properly; do not incinerate, heat, disassemble, or recharge. Figure 1: SA-33 Battery Cover 2 0706-0960345+00 5. Limited Warranty ROSSLARE ENTERPRISES LIMITED S (Rosslare) TWO YEAR LIMITED WARRANTY is applicable worldwide. This warranty supersedes any other warranty. Rosslare's TWO YEAR LIMITED WARRANTY is subject to the following conditions: Warranty Warranty of Rosslare's products extends to the original purchaser (Customer) of the Rosslare product and is not transferable. Products Covered By This Warranty and Duration ROSSLARE ENTERPRISES LTD. AND / OR SUBSIDIARIES (ROSSLARE) warrants that the SA-33 Wireless 5-Button Remote Control is free from defects in materials and assembly in the course of normal use and service. The warranty period commences with the date of shipment to the original purchaser and extends for a period of 2 years (24 months). Warranty Remedy Coverage In the event of a breach of warranty, ROSSLARE will credit Customer with the price of the Product paid by Customer, provided that the warranty claim is delivered to ROSSLARE by the Customer during the warranty period in accordance with the terms of this warranty. Unless otherwise requested by ROSSLARE ENTERPRISES LTD. AND / OR SUBSIDIARIES representative, return of the failed product(s) is not immediately required. If ROSSLARE has not contacted the Customer within a sixty (60) day holding period following the delivery of the warranty claim, Customer will not be required to return the failed product(s). All returned Product(s), as may be requested at ROSSLARE ENTERPRISES LTD. AND / OR SUBSIDIARY’S sole discretion, shall become the property of ROSSLARE ENTERPRISES LTD. AND / OR SUBSIDIARIES. To exercise the warranty, the user must contact Rosslare Enterprises Ltd. to obtain an RMA number after which, the product must be returned to the Manufacturer freight prepaid and insured. In the event ROSSLARE chooses to perform a product evaluation within the sixty (60) day holding period and no defect is found, a minimum US$ 50.00 or equivalent charge will be applied to each Product for labor required in the evaluation. Rosslare will repair or replace, at its discretion, any product that under normal conditions of use and service proves to be defective in material or workmanship. No charge will be applied for labor or parts with respect to defects covered by this warranty, provided that the work is done by Rosslare or a Rosslare authorized service center. Exclusions and Limitations ROSSLARE shall not be responsible or liable for any damage or loss resulting from the operation or performance of any Product or any systems in which a Product is incorporated. This warranty shall not extend to any ancillary equipment not furnished by ROSSLARE, whi…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: Rosslare Enterprises Ltd. Address: Flat 12, 9 Floor, Wing Fat Ind. Bldg., 12 Wang Tai Road City: Kowloon Bay, Kowloon Country: Hong Kong ............................................................................ Declare that: Name Representative of agent: ............. (1) Agent Company name: Hermon Laboratories Ltd. Address: Harakevet Industrial Zone City: Binyamina 30500 Country Israel is authorized to apply for Certification of the following product(s): Product description: ...Remote control ....... Type designation: ...SA-33G ................... Trademark: ...Rosslare........................................ on our behalf. Date: November 30, 2010 Name: Joe LeKostaj .......................... (2) Function: Engineering Manager Signature: ............................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Rosslare Enterprises Ltd. Address: Flat 12, 9 Floor, Wing Fat Ind. Bldg., 12 Wang Tai Road City: Kowloon Bay, Kowloon Country: Hong Kong To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: GCD-SA-33G Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: November 30, 2010 Name and signature of applicant: Mr. Joe LeKostaj Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 1 of 3 EXTERNAL PHOTOGRAPHS This document contains 2 photographs Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 2 of 3 Photograph No.1 SA-33G remote control front view Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 3 of 3 Photograph No.2 SA-33G remote control rear side view

CONTROLLED DRAWING This drawing is the property of RESL and can not be copied or loaned without written permission. DETAIL NAME DATE APPROVALDATE VER REV PROJECT MATERIAL QUANTITY DRAWN DATE DATE DATE UNIT DWG SIZE SHEET OF CHECKED APPROVED SCALE CAD FILE DWG NO. MODEL DESCRIPTION PART NO. FINISH UNLESS OTHERWISE SPECIFIED OPTION DECIMAL XX XX.X XX.XX XX.XXX 1.00 0.30 0.10 0.01 0.50 0.10 0.05 0.01 0.002 0.10 0.02 0.005 RADIUS CHAMFERS ANGLE R05 = 0.050 R1 = 0.100 R2 = 0.200 R5 = 0.500 XR = R MAX. C01 = 0.10 X 45 C02 = 0.20 X 45 C05 = 0.50 X 45 C1 = 1.00 X 45 S = STONE 0 - 30’ EDM (VDI) 27 - 30 SURFACE: A B B A 4 4 3 2 1 1 2 3 SAFETY ALARM SYSTEM SA-33G DONNA 1 : 1 SA-33G LABEL 71585 MM A4 1 1 0604-0960000+00 N/A 1 Transparent PP w/back adhesive LABEL, PRODUCT CONTENTS 13 Oct 08 1. Font: Arial 2. Foreground: Black; Pantone 485C--Red 3. Background: Transparent 4. Part must be RoHS compliant PLACE 30.5 3 7 . 3 19.70, LABEL AREA Rosslare Electronics (Shenzhen) Ltd. A 0 THE FIRST ISSUE Donna 6 Nov 09 ALL Model: SA-33G Wireless Hand Held 5-Button Remote Control 433.92 MHz Made in China FCC ID: GCD-SA-33G A 1 Add FCC ID Donna 3 Dec 10 ALL

Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 1 of 1 Label location The label is affixed on the rear side of the remote control as shown below. The label material is PVC with a permanent adhesive. The label with FCC ID:GCD-SA-33G will be located here.

Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 1 of 7 INTERNAL PHOTOGRAPHS This document contains 6 photographs Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 2 of 7 Photograph No.1 SA-33G remote control internal view Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 3 of 7 Photograph No.2 SA-33G remote control internal view Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 4 of 7 Photograph No.3 SA-33G remote control internal view Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 5 of 7 Photograph No.4 SA-33G remote control internal view Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 6 of 7 Photograph No.5 PCB top view Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 7 of 7 Photograph No.6 PCB second side view

Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Tel. +972-4-6288001 Fax. +972-4-6288277 E-mail: [email protected] Page 1 of 39 Report ID: ROSRAD_FCC.21309.doc Date of Issue: 11/2/2010 Electrical 839.01 TEST REPORT ACCORDING TO: FCC CFR 47 PART 15 subpart C, section 15.231(a) and subpart B FOR: Rosslare Enterprises Ltd. Remote control Model: SA-33G This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: ROSRAD_FCC.21309.doc Date of Issue: 11/2/2010 Page 2 of 39 Table of contents 1 Applicant information .........................................................................................................................................................3 2 Equipment under test attributes ........................................................................................................................................3 3 Manufacturer information ..................................................................................................................................................3 4 Test details ........................................................................................................................................................................3 5 Tests summary ..................................................................................................................................................................4 6 EUT description .................................................................................................................................................................5 6.1 General information ...........................................................................................................................................................5 6.2 Changes made in EUT ......................................................................................................................................................5 6.3 Test configuration diagram................................................................................................................................................5 6.4 EUT test configuration in X-axis position ..........................................................................................................................5 6.5 Transmitter characteristics ................................................................................................................................................6 7 Transmitter tests according to 47CFR part 15 subpart C requirements...........................................................................7 7.1 Periodic operation requirements .......................................................................................................................................7 7.2 Field strength of emissions..............................................................................................................................................10 7.3 Occupied bandwidth test .................................................................................................................................................23 7.4 Antenna requirements .....................................................................................................................................................26 8 Emission tests according to 47CFR part 15 subpart B requirements.............................................................................27 8.1 Radiated emission measurements ..................................................................................................................................27 9 APPENDIX A Test equipment and ancillaries used for tests..........................................................................................31 10 APPENDIX B Measurement uncertainties ......................................................................................................................32 11 APPENDIX C Test laboratory description .......................................................................................................................33 12 APPENDIX D Specification references ...........................................................................................................................33 13 APPENDIX E Test equipment correction factors ............................................................................................................34 14 APPENDIX F Abbreviations and acronyms ....................................................................................................................39 Report ID: ROSRAD_FCC.21309.doc Date of Issue: 11/2/2010 Page 3 of 39 1 Applicant information Client name: Rosslare Enterprises Ltd. Address: Flat 12, 9 Floor, Wing Fat Ind. Bldg., 12 Wang Tai Road, Kowloon Bay, Kowloon, Hong Kong Telephone: +852 2795 5630 Fax: +852 2795 1508 E-mail: [email protected] Contact name: Mr. Leonid Beckman 2 Equipment under test attributes Product name: Remote control Product type: Transmitter Model(s): SA-33G Serial number: 000087 Hardware version: 0101-2090070+04 Software release: SA33_V04.1 Receipt date 10/17/2010 3 Manufacturer information Manufacturer name: Rosslare Enterprises Ltd. Address: Flat 12, 9 Floor, Wing Fat Ind. Bldg., 12 Wang Tai Road, Kowloon Bay, Kowloon, Hong Kong Telephone: +852 2795 5630 Fax: +852 2795 1508 E-Mail: [email protected] Contact name: Mr. Leonid Beckman 4 Test details Project ID: 21309 Location: Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Test started: 10/18/2010 Test completed: 10/24/2010 Test specification(s): FCC Part 15, subpart C, §15.…

Text truncated - open the document above for the full version.

Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 1 of 7 SETUP PHOTOGRAPHS This document contains 6 photographs Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 2 of 7 Photograph No.1 Setup for spurious emission measurements in the anechoic chamber below 30 MHz Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 3 of 7 Photograph No.2 Setup for radiated emission measurements in the anechoic chamber from 30 to 1000 MHz Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 4 of 7 Photograph No.3 Setup for radiated emission measurements in the anechoic chamber above 1000 MHz Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 5 of 7 Photograph No.4 Setup for radiated emission measurements in the anechoic chamber, EUT close view Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 6 of 7 Photograph No.5 Setup for occupied bandwidth measurements Rosslare Enterprises Ltd. FCC ID:GCD-SA-33G Page 7 of 7 Photograph No.6 Setup for periodic operation measurements