GKRRXLN3LGA Module

Compal Electronics, Inc. No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Date: 2024-11-19 FCC ID: GKRRXLN3 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Compal Electronics, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Compal Electronics, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Miranda Wu, Regulatory PM Compal Electronics, Inc. Tel: 02-87516228 Fax: 02-87516535 E-mail: [email protected]

Compal Electronics, Inc. No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service:  cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB)  cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab)  Agent can be Individual Entity or a Company Entity  Agent Entity must be located in US, US address/phone  Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter)  Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. Compal Electronics, Inc. No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent ) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by secti on 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: November 21, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 11/15/2024 – 11/14/2029. (5 years) The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Compal Electronics, Inc. Service Type: (original application, class 2 permissive change, class 3 permissive change, etc.) FCC ID: GKRRXLN3 Grantee FRN:0007728256 Module type: (single-modular transmitter or limited single-modular transmitter) Contact Name: Miranda Wu Street Address: No.581 & 581-1, Ruiguang Rd., Neihu District, City/Province/Zip: Taipei, (114) Taiwan Telephone No: 02-87516228 Email: [email protected] Applicant Signature: Date:11/19/2024 Signed by (Printed Name/Title): Miranda Wu/ Regulatory PM *By signing this letter, the client declares and agrees that the service provided by Approve-IT, Inc. will only be applicable for the module model described above. The client also declares and accepts that the service won’t be applicable in any way to any host devices that could contain the module for which the service has been contracted.

Compal Electronics, Inc. No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Date: 2024-11-19 FCC ID: GKRRXLN3 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Part list Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued: External Photos Internal Photos Test Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Name: Miranda Wu/ Title: Regulatory PM Compal Electronics, Inc. Tel: 02-87516228 Fax: 02-87516535 E-mail: [email protected]

Compal Electronics, Inc. No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Date: 2024-11-19 FCC ID: GKRRXLN3 AUTHORIZATION LETTER To Whom It May Concern: Compal Electronics, Inc. hereby authorizes Tilly Pan/Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Tilly Pan/Specialist of BV CPS Taoyuan on Compal Electronics, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Name: Miranda Wu/ Title: Regulatory PM Compal Electronics, Inc. Tel: 02-87516228 Fax: 02-87516535 E-mail: [email protected]

Compal Electronics, Inc. No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Date: 2024-11-19 FCC ID: GKRRXLN3 A U T H O R I Z A T I O N L E T T E R To whom it may concern: I, the undersigned Joyce Ting of Compal Electronics Inc.hereby authorize Miranda Wu of Compal Electronics Inc. to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------------- Name: Joyce Ting / Title: RF Regulatory Compliance Manager Compal Electronics Inc. Tel: 886-2-8797-8599 #114499 Fax: 886-2-2658-6080 E-mail: [email protected]

FCC ID: GKRRXLN3 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch November 22, 2024 Dear Application Examiner, Compal Electronics, Inc., LGA Module, FCC ID: GKRRXLN3 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of KDB996369 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip SDX75. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is SDX75. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: GKRRXLN3 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Tilly Pan Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch

Brand Name: COMPAL Model Name: RXL-N3 Label location

IC: 2533B-RXLN3

Report No.: MFBEDW-WTW-P24070638 Page No. 1 / 10Report Format Version: 7.1.0 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1091) Report No.: MFBEDW-WTW-P24070638 FCC ID: GKRRXLN3 Product: LGA Module Brand: COMPAL Model No.: RXL-N3 Received Date: 2024/7/29 Test Date: 2024/10/15 Issued Date: 2024/11/22 Applicant: Compal Electronics, Inc. Address: No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Desi gnation Number: 788550 / TW0003 Approved by: , Date:2024/11/22 Jeremy Lin / Project Engineer This test report consists of 10 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Pettie Chen / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBEDW-WTW-P24070638 Page No. 2 / 10Report Format Version: 7.1.0 Table of Contents 1 Release Control Record ............................................................................................................................................ 3 2 Certificate .................................................................................................................................................................... 4 3 Applicable RF Exposure Limit .................................................................................................................................. 5 4 Test Results ................................................................................................................................................................ 7 5 Conclusion .................................................................................................................................................................. 9 6 Information of the Testing Laboratories ................................................................................................................ 10 Report No.: MFBEDW-WTW-P24070638 Page No. 3 / 10Report Format Version: 7.1.0 1 Release Control Record Issue No. Description Date Issued MFBEDW-WTW-P24070638 Original release. 2024/11/22 Report No.: MFBEDW-WTW-P24070638 Page No. 4 / 10Report Format Version: 7.1.0 2 Certificate Product: LGA Module Brand: COMPAL Test Model: RXL-N3 Sample Status: Engineering sample Applicant: Compal Electronics, Inc. Test Date: 2024/10/15 FCC Rule Part: FCC Part 2 (Section 2.1091) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBEDW-WTW-P24070638 Page No. 5 / 10Report Format Version: 7.1.0 3 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. …

Text truncated - open the document above for the full version.

Report No.: RFBEDW-WTW-P24070638-1 Page No. 1/ 18Report Format Version: 6.1.1 CBSD Test Report Report No.: RFBEDW-WTW-P24070638-1 FCC ID: GKRRXLN3 Test Model: RXL-N3 Received Date: 2024/7/29 Test Date: 2024/8/12 ~ 2024/8/13 Issued Date: 2024/11/22 Applicant: Compal Electronics, Inc. Address: No. 581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration/ Desi gnation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBEDW-WTW-P24070638-1 Page No. 2/ 18Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 4 Measurement ......................................................................................................................................... 7 4.1 End User Device additional requirements ........................................................................................... 7 4.2 Test Procedure .................................................................................................................................... 7 4.3 Test Environment ................................................................................................................................ 9 4.4 Test Equipment ................................................................................................................................... 9 4.5 Test Setup ......................................................................................................................................... 10 4.6 Test Result .......................................................................................................................................... 11 5 Pictures of Test Arrangements .......................................................................................................... 17 Appendix – Information of the Testing Laboratories ................................................................................. 18 Report No.: RFBEDW-WTW-P24070638-1 Page No. 3/ 18Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued RFBEDW-WTW-P24070638-1 Original release 2024/11/22 Report No.: RFBEDW-WTW-P24070638-1 Page No. 4 / 18Report Format Version: 6.1.1 1 Certificate of Conformity Product: LGA Module Brand: COMPAL Test Model: RXL-N3 Sample Status: Engineering sample Applicant: Compal Electronics, Inc. Test Date: 2024/8/12 ~ 2024/8/13 Standards: FCC Part 96.47 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:2024/11/22 Pettie Chen / Senior Specialist Approved by : , Date:2024/11/22 Jeremy Lin / Project Engineer Report No.: RFBEDW-WTW-P24070638-1 Page No. 5 / 18Report Format Version: 6.1.1 2 Summary of Test Results Applied Standard: FCC Part 96.47 FCC Clause Test Item Result Remarks 96.47(a)(1) End User Device additional requirements Pass Meet the requirement 2.1 Modification Record There were no modifications required for compliance. Report No.: RFBEDW…

Text truncated - open the document above for the full version.

Report No.: RFBEDW-WTW-P24070638-3Page No. 1 / 82Report Format Version: 7.1.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 96 47 CFR FCC Part 2 Report No.: RFBEDW-WTW-P24070638-3 FCC ID: GKRRXLN3 Product: LGA Module Brand: COMPAL Model No.: RXL-N3 Received Date: 2024/7/29 Test Date: 2024/8/5 ~ 2024/10/6 Issued Date: 2024/11/22 Applicant: Compal Electronics, Inc. Address: No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei, (114) Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location(1): No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan Test Location(2): No. 70, Wenming Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) FCC Registration / Desi gnation Number: 788550 / TW0003 for Test Location(1) 281270 / TW0032 for Test Location(2) Approved by: , Date:2024/11/22 Jeremy Lin / Project Engineer This test report consists of 82 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared b y : Pettie Chen / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBEDW-WTW-P24070638-3Page No. 2 / 82Report Format Version: 7.1.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description of EUT ..................................................................................................................................... 7 3.2 Antenna Description of EUT ..................................................................................................................................... 8 3.3 Test Mode Applicability and Tested Channel Detail .................................................................................................. 9 3.3.1 LTE Band 48 .......................................................................................................................................................... 9 3.4 Test Program Used and Operation Descriptions .................................................................................................... 11 3.5 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 11 3.6 Configuration of Peripheral Devices and Cable Connections ................................................................................ 11 4 Test Instruments ...................................................................................................................................................... 12 4.1 Maximum EIRP ....................................................................................................................................................... 12 4.2 Modulation Characteristics ..................................................................................................................................... 12 4.3 Peak to Average Ratio ............................................................................................................................................ 12 4.4 Bandwidth .....................…

Text truncated - open the document above for the full version.

Report No.: RFBEDW-WTW-P24070638-3Page No. 60 / 82Report Format Version: 7.1.0 LTE Band 48, Channel Bandwidth: 15 MHz FULL CH 55315 (3557.5 MHz) FULL CH 55990 (3625 MHz) FULL CH 56665 (3692.5 MHz) Report No.: RFBEDW-WTW-P24070638-3Page No. 61 / 82Report Format Version: 7.1.0 1RB#MAX CH 55315 (3557.5 MHz) 1RB#MAX CH 55990 (3625 MHz) 1RB#MAX CH …

Text truncated - open the document above for the full version.