GMLNPW-1PADual Band Cellular PCS Phone

Nokia 3361 User Guide DRAFT Phone notes NotesWhere to get information My numberWireless service provider Number to call for voice mail Wireless service provider Wireless provider’s number Wireless service provider Provider’s customer care Wireless service provider Model number 3361See “Contact Nokia” on page 9. Phone typeNPW-1PABack of title page Electronic serial number (ESN) See “Contact Nokia” on page 9. The wireless phone described in this guide is approved for use in TDMA and AMPS networks. LEGAL INFORMATION Part No. 9357902, Issue No. 1 Copyright ©2002 Nokia. All rights reserved. Nokia, Nokia Connecting People, the Nokia Original Accessories logos, Nokia 3361, Space Impact and Snake II are trademarks or registered trademarks of Nokia. Printed in Canada 07/2002 Nokia, Nokia Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates. US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for Nokia phone 3361. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. FCC/INDUSTRY CANADA NOTICE Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. [ i ] Contents 1Safety first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Get the most out of this guide . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Understand wireless network services . . . . . . . . . . . . . . . . . . . . .5 Learn about accessibility solutions . . . . . . . . . . . . . . . . . . . . . . . .6 Contact Nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Your phone’s label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Contact your service provider . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3Set up your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Install the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Remove the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Important battery information . . . . . . . . . . . . . . . . . . . . . . . . . 14 Prolong battery life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Switch on your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Set up your headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Use the carrying case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Adjust the volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Adjust screen contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4Review the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Your Nokia 3361 phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 About the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Learn the keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Make and answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Check the Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Review phone symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Use the selection keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Check in-phone help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Browse phone menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 [ ii ] Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Phone book menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 5Add information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 About entering letters and numbers . . . . . . . . . . . . . . . . . . . . . .31 ABC and 123 methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Write with predictive text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 6Store names and numbers. . . . . . . . . . . . . . . . . . . . . . . . .39 Open the phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Save names and numbers . . . …

Text truncated - open the document above for the full version.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 August 4, 2002 RE: FCC ID: GMLNPW-1PA Attention: Randy Leenerts I have a few comments on this Application. 1 The internal photos are not clear when magnified to view components. Please provide celarer pictures with a little finer resolution. 2 No FRN number appears on the 731. Please provide an FRN number. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

ESN: Code: IC: AWS Part#: FCC ID: Model: Type: 1 . 5 1 . 5 4x1.5 0.2 0 . 2 0 . 2 Drw N Note 3361TYPE LABEL (AWS) DMP06617 For printing pcx-file 32.5 0 . 2 Note Lay out and dimensions 2:1 Artwork 1:1 11 x 6.5 (R=1.5) Bar Code 128B:Serial number This line Contains Possible Variant Specific information 3 8 . 5 9.5 p066171dpi600.pcx PRINTING FILE o. JANUARY FEBRUARY MARCH APRIL MAY JUNE JULY AUGUST SEPTEMBER OCTOBER NOVEMBER DECEMBER A B C D E F G H I J K L A B C D E F G H I J ... 01 ... 31 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 ... MONTH(M)LETTERDATE (DD) LETTER YEAR(Y) Part name DMC03344 NMP Code: 9370583 TYPE LABEL ROLL PRINTING FILE p066171dpi300.pcx 2.0 0.2 FW Alliance USAT FACTORY (F) LETTER LINE (L) Reynosa MEXICO R TMC Nokia Masan KOREA M MADE IN USA ESN: 23500000000 Code: 0500000MYDDFL IC: AWS Part#: 123456000000 661N-NPW1PA FCC ID: GMLNPW-1PA Model: 3361 Type: NPW-1PA 1 2 . 5 Material Sheet 1 of 1 Original Scale Original Size A4 1:1 NMP Code Item Name Document Number Doc. Vers. Name / Date Change Ref. Approved / Date Original Designer FUNCTIONAL CHARACTERISTICS KEY MAIN FUNCTIONAL CHARACTERISTIC MAIN FUNCTIONAL CHARACTERISTIC ( Proof of Process Capability Required ) Copyright c Nokia Mobile Phones. All rights reserved THIS DRAWING IS PROTECTED BY COPYRIGHT AS AN UNPUBLISHED WORK UNAUTHORIZED REPRODUCTION OF THIS DRAWING IS NOT PERMITTED THIS DRAWING CONTAINS PROPRIETARY AND CONFIDENTIAL INFORMATION This document is the property of Nokia Mobile Phones 1.1 Date and Factory Code (See table below) Bar Code 128B/C AWS Part Bar Code 128B: Product Code 0.1 D. Nickel, 071602T. Dickens, 071602 ESN number Product code date and factory 7.33 x 7.33 Data Matrix: MADE IN USA ESN: 23500000000 Code: 0500000MYDDFL IC: 661N-NPW1PA AWS Part#: 123456000000 FCC ID: GMLNPW-1PA Model: 3361 Type: NPW-1PA D. Nickel, 071602 MADE IN USA ESN: 23500000000 Code: 0500000MYDDFL IC: 661N-NPW1PA AWS Part#: 123456000000 FCC ID: GMLNPW-1PA Model: 3361 Type: NPW-1PA The wireless phone described in this guide is approved for use in TDMA and AMPS networks. LEGAL INFORMATION Part No. 9357902, Issue No. 1 Copyright ©2002 Nokia. All rights reserved. Nokia, Nokia Connecting People, the Nokia Original Accessories logos, Nokia 3361, Space Impact and Snake II are trademarks or registered trademarks of Nokia. Printed in Canada 07/2002 Nokia, Nokia Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates. US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for Nokia phone 3361. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. FCC/INDUSTRY CANADA NOTICE Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

NOKIA PC Site Salo SAR Compliance Test Report Date of report: Contact person: Responsible test engineer: Test report no.: Number of page~; Client: Testing laboratory: Tested devices: Supplement reports: T esting has been carried out in accordance with~ Doc~mentatioo~ Test results: 2002-07-09 Date and signatures: For the contents: ~£~ Markku Oksanen Engineering Manager .s~ s~ Sami Savela Test Engineer FCC ID: GMLNPW-1PAExhibit 11: SAR Report 9th of July 2002 Sami Savela Sami Savela Kari Nyyssonen NokiaCorporation 6000 Connection Drive Jrving TEXAS 15039, USA Tel. + 1 972 8945000 fax. +1 972 894 4589 Nokia Corporation Joensuunkatu 7 P.O.Box 86 FIN-24101 SALO Finland Tel. +358-7180-08000 Fax. +358-7180-47222 GMlNPW-1PA CBM-12, BMC-3, BMC-2. BlC-2, Accessory Cover tEEEPrS28.;200X Draft 6.4 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques FCC SupplemenlC Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Edition 01 ~01 The documentation of the testing performed on the tested devices is archived for 15 years at PC Site Salo PC Site Salo Exhibit 11: SAR Report Applicant: Nokia Corporation FCC ID: GMLNPW-1PA Copyright  2002 Nokia Corporation 2 (78) CONTENTS 1.SUMMARY FOR SAR TEST REPORT.....................................................................................................................3 1.1MAXIMUM RESULTS FOUND DURING SAR EVALUATION............................................................................................................................3 1.1.1Head Configuration...............................................................................................................................................................................3 1.1.2Body Worn Configuration..................................................................................................................................................................3 1.1.3Measurement Uncertainty.................................................................................................................................................................3 2.DESCRIPTION OF TESTED DEVICE.......................................................................................................................4 2.1PICTURE OF PHONE..............................................................................................................................................................................................4 2.2DESCRIPTION OF THE ANTENNA........................................................................................................................................................................4 2.3BATTERY OPTIONS...............................................................................................................................................................................................4 2.4BODY WORN ACCESSORIES...............................................................................................................................................................................5 3.TEST CONDITIONS.................................................................................................................................................5 3.1AMBIENT CONDITIONS........................................................................................................................................................................................5 3.2RF CHARACTERISTICS OF THE TEST SITE...........................................................................................................................................................5 3.3TEST SIGNAL, FREQUENCIES, AND OUTPUT POWER......................................................................................................................................5 4.DESCRIPTION OF THE TEST EQUIPMENT...........................................................................................................6 4.1SYSTEM ACCURACY VERIFICATION...................................................................................................................................................................6 4.2TISSUE SIMULANTS..............................................................................................................................................................................................7 4.2.1Head Tissue Simulant...........................................................................................................................................................................7 4.2.2Muscle Tissue Simulant.......................................................................................................................................................................8 4.3PHANTOMS............................................................................................................................................................................................................9 4.4ISOTROPIC E-FIELD PROBE ET3DV6..............................................................................................................................................................9 5.DESCRIPTION OF THE TEST PROCEDURE........................................................................................................10 5.1TEST POSITIONS.................................................................................................................................................................................................10 5.1.1Against Phantom Head.....................................................................................................................................................................10 5.1.2Body Worn Configuration....................................................................................................…

Text truncated - open the document above for the full version.

Schmid & Engineering Partner AG Calibration Certificate 1800 MHz System Validation Dipole Type"D1800¥2"""""" Serial Number: ~~Place of Calibration ~Date of Calibration ~Calibration Interval Schrnid & Partner Engineering AG hereby certifies, that this device has been calibrated on the date indicated above. The calibration was performed in accordance with specifications and procedures of Schrnid & Partner Engineering AG. Wherever applicable, the standards used in the calibration process are traceable to international standards. In all other cases the standards of the Laboratory for EMF and Microwave Electronics at the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland have been applied. ~Calibrated by Approved by' Schmid & Engineering Partner AG Zeughausstrasse 43, 8004 Zurich, Switzerland, Phone +41 1 245 97 00, Fax +41 1 245 97 79 Manufactured: Calibrated : I. Measurement Conditions The measurements were performed in the flat section of the new generic twin phantom filled with head simulating glycol solution of the following electrical parameters at 1800 MHz: ::!:5% ::!:5% Relative Dielectricity Conductivity 40.5 1.35 mho!m The DASY3 System (Software version 3.1d) with a dosimetric E-field probe ET3DV6 (SN:1507, Conversion factor 5.31 at 1800 MHz) was used for the measurements. The dipole was mounted on the small tripod so that the dipole feedpoint was positioned below the center marking of the flat phantom section and the dipole was oriented parallel to the body axis (the long side of the phantom). The standard measuring distance was 1Qmm from dipole center to the solution surface. The included distance holder was used during measurements for accurate distance positioning. The coarse grid with a grid spacing of 20mm was aligned with the dipole. The 5x5x7 fine cube was chosen for cube integration. Probe isotropy errors were cancelled by measuring the SAR with normal and 90° turned probe orientations and averaging. The dipole input power (forward power) was 250mW :t 3 %. The results are normalized to I W input power. 2. SAR Measurement Standard SAR-measurements were performed with the phantom according to the measurement conditions described in section I. The results have been normalized to a dipole input power of IW (forward power). The resulting averaged SAR-values are: averaged over cmJ (I g) of tissue39.0 mW/g averaged over 10 cm3 (10 g) of tissue: 20.3 mW/g Note: If the liquid parameters for validation are slightly different from the ones used for initial calibration, the SAR-values will be different as well. The estimated sensitivities ofSAR- values and penetration depths to the liquid parameters are listed in the DASY Application Note 4: ' SAR Sensitivities' . 3. Dipole Impedance and Return Loss The impedance was measured at the SMA-connector with a network analyzer and numerically transformed to the dipole feedpoint. The transformation parameters from the SMA-connector to the dipole feedpoint are: Electrical delay: Transmission factor: 1.232 ns 0.982 ( one direction) (voltage transmission, one direction) The dipole was positioned at the flat phantom sections according to section 1 and the distance holder was in place during impedance measurements. Feedpoint impedance at 1800 MHz: Re{Z} = 46.0 0 Im {Z} = -6.0.0 Return Loss at 1800 MHz -22.5 dB 4. Handlin!! Do not apply excessive force to the dipole arms, because they might bend. Bending of the dipole arms stresses the soldered connections near the feedpoint leading to a damage of the dipole. 5. Desi2o The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short- circuited for DC-signals. 6. Power Test After long tenn use with 40W radiated power, only a slight wanning of the dipole near the feedpoint can be measured. N Q o .- - .- 0 c O '.;:; (\J O a. ~ "' x E Q) () "C>~ o ~ 0 1 , - ~ I/) II O a.~ U)- O " .q"~ II N ...0 tj) . Eo O +t .c: CJ E~ U) E (") ~CX) II 0 bl.ri ," ~ N 0> :t:o ~~ Ocr: 0« CX)C/) ~ OCX)r:rS ON"O ~U).q" E IIW~ ENWo C~+t 00"."0> .N > ~ O:t:> N~E II ~~ "'0 -c 00 ~ > ~ . -> -Q) ~ E 0 0' '(U ., 0-- oN-CJ NU)IIM~ Z..~xl.ricr: '-C~-« C/) ~ ' .(") C/) > CJ . OCU) " N " .-" m >()~"O "5[C">:<DE Oa. C/)U)° Eoc-. -"OU.o- CX) (\J .-= ~ +t M ~ §~ O CJo) OQ)cu> - -O ,- >"... Q)~~roE~ - 0'-Q)U) N NW~.q" . a.:t:-ZajCX)m .-~(\JW~,."O 00iJ: ,~:[(") O."W >(\JQ)O CCX)EQ) . O~oca.u9 ., -, c .' .->. c ,., ~ O ~ ~ u (\J 1- N '.;:; .-= .." C .c: W -(\J U "'OQ)a..,I/)~'- .-:J Q) Q) Q) Q) rng-~.g.aC~ >,-«,-:JQ)O u.C/)a.(.)a.a. "0) ~ ..§. ~ ~ ~ ~ + w o 0; ~ 0 + LU ~ 0) 0 + w o ~ CX) ~ w ~ 1'-- 0 + w o 0: <0 0 + w ~ U") 0 + w ~ -q- 0 + w o o c.-j 0 + LU ~ N 0 + UJ 0 0: ~ 10 Jan 2002 1: 45.973... -6.0176... 14.694 pF //"-~ ;'-.. 16:32:38 1 800.000 000 MHz lrnIJ s 11 1 u FS "" \ / I \ "~ I " , /'\ / ! -, , , > Del / Cor \ \ Av8 16 t ~ Cor t . Schmid & Engineering Partner AG Zeughausstrasse 43, 8004 Zurich, Switzerland, Phone +41 1 245 97 00, Fax +41 1 245 97 79 Calibration Certificate 900 MHz System Validation Dipole Type ~~Serial Number ~Place of Calibration ~Date of Calibration ~Calibration Interval Schrnid & Partner Engineering AG hereby certifies, that this device has been calibrated on the date indicated above. The calibration was performed in accordance with specifications and procedures of Schrnid & Partner Engineering AG . Wherever applicable, the standards used in the calibration process are traceable to international standards. In all other cases the standards of the Laboratory for EMF and Microwave Electronics at the Swiss Federal Institute of Technology (Ern) in Zurich, Switzerland have been applied. Calibrated by Approved by -- Schmid & Engineering Partner AG Zeughausstrasse 43, 8004 Zurich, Switzerland, Phone +41 1 245 97 00, Fax +41 1 245 97 79 Manufactured: Cali brated : .. I. Measurement Conditions The measurements were performed in the flat section of the new generic twin phantom filled wi…

Text truncated - open the document above for the full version.