GMLNSD-5FXPCS Band Cellular Transceiver

Nokia 8270 User Guide Manufactured or sold under one or more of the following U.S. patents: 5737323, 5758278, 6076181, 5889770, 5802465, 5491718, 5859843, 6078570, 99162, 07278, 6088342, 6167038, 6148290, 5444816, 5699482, 4969192, 5754976, 5701392, 5793744, 5596571, 6009129, 6005889, 6055264, 6084471, 5990740, 6154455, 5854978, 5790957, 6205325, 6253075, 5440597, 5796757, 6292474, 6029065, 5887250, 5821891, 5887252, 5708656, 6047071, 5929813, 6025802, 5642377, D405445, D406583, D414189, D405784, D423515. Others: 4558302, 4901307, 5056109, 5101501, 5109390, 5265119, RE 32580. The wireless phone described in this guide is approved for use in CDMA 1900 networks. LEGAL INFORMATION Part No. XXXXXX, Issue 1 Copyright 2002 Nokia Mobile Phones. All rights reserved. Nokia is a registered trademark of Nokia Corporation. Printed in Canada 4/2002 Nokia, Nokia Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates. US Patent No 5818437 and other pending patents. T9 text input software Copyright 1999-2001. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for Nokia phone 3280. The right to make changes and improvements to any of the products described in this guide without prior notice is reserved. EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. FCC/INDUSTRY CANADA NOTICE Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. [ 9 ] 1 1 FOR YOUR SAFETY Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual. SWITCH OFF WHERE PROHIBITED Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Don't use a wireless phone while driving. INTERFERENCE All wireless phones may get interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any regulations or rules. Switch the wireless phone off near medical equipment. SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. SWITCH OFF WHEN REFUELING Don't use the wireless phone at a refueling point. Don't use near fuel or chemicals. SWITCH OFF NEAR BLASTING Don't use the wireless phone where blasting is in progress. Observe restrictions, and follow any regulations or rules. USE SENSIBLY Use only in the normal position. Don't touch the antenna unnecessarily. [ 10 ] 1 QUALIFIED SERVICE Only qualified personnel may install or repair phone equipment. ACCESSORIES AND BATTERIES Use only approved accessories and batteries. Do not connect incompatible products. ACCESSORIES Use only approved accessories. Do not connect incompatible products. WATER-RESISTANCE Your wireless phone is not water-resistant. Keep it dry. CALLING Ensure the phone is switched on and in service. Enter the phone number, including the area code, then press [handset up]. To end a call, press [handset down]. To answer a call, press [handset up]. EMERGENCY CALLS Ensure the phone is switched on and in service. Press [handset down] as many times as needed (for example, to exit a call, to exit a menu) to clear the display. Enter the emergency number, then press [handset up]. Give your location. Do not end the call until told to do so. Note:You can also press and hold the 9 key to make an emergency call, if the emergency key 9 feature is activated. [ 11 ] 2 2) Welcome • BEFORE YOU BEGIN This section provides information needed before you use your phone. This guide describes the Nokia 8270 phone, which is approved for use in CDMA 1900 networks. • UNDERSTAND NETWORK SERVICES This guide describes a number of features known as network services. You must arrange for these special services through your wireless service provider. Before you can use these network services features, you must subscribe to them through your service provider. Your service provider will instruct you on the use of these services. This guide informs you when you need to contact your service provider for more step-by-step information. Note:Some networks may not support all language-dependent characters and/or services. • VISIT NOKIA ON THE WEB The latest version of this manual may be available on Nokia’s World Wide Web site at: www.nokia.com 2 [ 12 ] • CONTACT NOKIA To help Nokia promptly answer your questions, please have your phone’s model number, ESN number, and your local zip code ready when you call Customer Service. The ESN and model number are on the back of your phone under the battery. If you’re calling about an accessory, please have it available for reference. Nokia Customer Care Center 7725 Woodland Center Boulevard, Suite 150 Tampa, FL 33614 Tel: 1-888-NOKIA-2U (1-888-665-4228) Fax: 1-813-249-9619 TTY:1-800-24-NOKIA (1-800-246-6542) Customer Care, Canada Nokia Products Ltd. 601 Westney Rd. South Ajax, Ontario L1S 4N7 Tel:1-888-22-NOKIA (1-888-226-6542) Fax:1-905-427-1070 [ 13 ] 3 3) Prepare your phone for use • INSTALL THE BATTERY Place the battery in the grooves on the back of your phone, then slide the battery upward until it clicks. • CHARGE THE BATTERY Before you use your phone and when the battery runs down, you need to charge it. 1Connect the lead from the charger to the bottom of the phone. 2Connect the charger to an AC wall outlet. If the phone is turned on, the messages Charger connected and th…

Text truncated - open the document above for the full version.

Nokia Mobile Phones (USA) Inc. 12278 Scripps Summit Drive San Diego, CA 92131 To:FCC Application Processing Branch Re:FCC ID GMLNSD-5FX Applicant:Nokia Mobile Phones Inc. Date:February 8, 2002 Nokia Mobile Phones model 8270, with FCC Identifier GMLNSD-5FX complies with the provisions of Section 22.921 in CFR 47, concerning E911 Call Processing Modes. Sincerely, Jari Niemela Product Program Manager, Product Development, San Diego

Federal Communications Commission DA 00-132 Before the Federal Communications Commission Washington, D.C. 20554 In the Matter of 911 Call Processing Modes ) ) ) WT Docket No. 99-328 ORDER Adopted: January 27, 2000Released: January 28, 2000 By the Chief, Wireless Telecommunications Bureau: I. INTRODUCTION AND BACKGROUND 1. In its Second Report and Order in the Wireless E911 Rulemaking, CC Docket No. 94- 102, 1 the Commission adopted Section 22.921 of its rules, 47 C.F.R.§ 22.921. To help improve 911 call completion, this rule requires new analog wireless handsets, and multimode handsets when operating in analog mode, to be able to complete 911 calls to either analog carrier in an area, regardless of the programming of the handset for non-911 calls. The rule takes effect on February 13, 2000. 2 Further, the Commission approved three proposed 911 call processing modes, while stating general principles for other acceptable modes and encouraging the development of further improvements in 911 call completion, including the extension of improved calling methods to digital services. 3 The Commission delegated authority to the Wireless Telecommunications Bureau (Bureau) to consider and approve, deny, or approve with modification new or revised 911 call processing modes. 4 2. On October 27, 1999, Nokia, Inc. filed a letter with the Bureau requesting approval for an alternate 911 call completion method for Nokia’s multi-mode products, including both digital and analog transmission technologies. 5 Nokia describes its method as based on the Automatic A/B Roaming- Intelligent Retry (A/B-IR) method approved in the Second Report and Order, but going further to attempt call completion on all systems on which a handset is capable of operating, including both analog and digital modes. Specifically, Nokia states that its multi-mode handsets will be programmed with the capability to access all systems on which they have the capacity for operating. 6 When a 911 call is dialed, 1 Revision of the Commission’s Rules To Ensure Compatibility With Enhanced 911 Emergency Calling Systems, CC Docket No. 94-102, Second Report and Order, 14 FCC Rcd 10954 (1999). (Second Report and Order). 2 Id. at 10992. See also Revision of the Commission’s Rules To Ensure Compatibility With Enhanced 911 Emergency Calling Systems, CC Docket No. 94-102, Third Memorandum Opinion and Order, FCC 00-7, released January 13, 2000 (Third Memorandum Opinion and Order) at paras. 5-8. 3 Second Report and Order, 14 FCC Rcd at 10993. 4 Id. at 10993, 10995. 5 Letter from David Siddall, Counsel to Nokia, to Thomas Sugrue, Chief, Wireless Telecommunications Bureau, Oct. 27, 1999 (Nokia Request). 6 Nokia Request at 3. Federal Communications Commission DA 00-132 2 the Nokia handset will first attempt to complete the call with the “presently acquired system,” 7 i.e., the system the handset is currently using for non-emergency calls, whether this system is analog or digital. If the call cannot be completed with that system, the handset will next attempt to complete the call using the handset’s preferred roaming list (PRL). If the call cannot be completed on any of the preferred systems, the handset will attempt to complete the call on any and all additional systems on which it is capable of operating, analog or digital, regardless of the handset’s programmed preferences. 8 3. In a Public Notice in this docket, the Bureau sought comment on this proposal, in particular on whether the proposed method is consistent with the Commission’s rules and the principles set out by the Commission for 911 call processing modes. 9 Comments supporting the proposal were filed by AT&T, Cellular Telecommunications Industry Association (CTIA), and the National Emergency Number Association (NENA). The Wireless Consumer’s Alliance, Inc. (WCA) filed comments opposing the proposal, claiming that the Nokia proposal does not meet conditions adopted by the Commission to mitigate against “lock-in” of calls on the caller’s preferred carrier and delays in 911 call processing. 10 In response to the WCA comments and to Bureau staff requests, Nokia supplied additional information to justify approval of its proposed 911 call completion method. 11 On December 30, 1999, Nokia requested a deferral of the February 13, 2000 deadline for Nokia’s multi-mode handsets until four months after the Commission rules on its call completion proposal, to allow time to implement necessary changes in those handsets. 12 In response to Bureau staff requests, Nokia subsequently provided additional information to justify the requested extension. 13 II. DISCUSSION 4. Based on our review of the Nokia request and the record, we approve Nokia’s proposed 911 call completion method, subject to the same two conditions that the Commission imposed in the Second Report and Order to address lock-in concerns associated with the A/B-IR call completion method. 14 First, the handset must provide effective feedback to inform the user when 911 call processing is underway and has not finished, for example in the form of an audible tone or message in addition to a 7 Id., Attachment at 4. 8 Id at 3. 9 Public Notice, “Comments Sought on 911 Call Processing Method Proposed by Nokia,” DA 99-2508, released Nov.10, 1999. 10 WCA Comments in Opposition to the Nokia Application (WCA Comments). See also Letter from Carl Hilliard, WCA, to Magalie Roman Salas, Secretary, FCC, January 11, 2000 (WCA January 11 Ex parte Letter). 11 See Letter from David Siddall, Counsel to Nokia, to Magalie Roman Salas, Secretary, FCC, December 30, 2000 (Nokia December 30 Ex Parte Letter); Letter from David Siddall, Counsel to Nokia, to Magalie Roman Salas, Secretary, FCC, January 19, 2000 (Nokia January 19 Ex Parte Letter). 12 Letter from David Siddall, Counsel to Nokia, to Thomas Sugrue, Chief, Wireless Telecommunications Bureau, Dec. 30, 1999 (Nokia Waiver Letter) at 2. 13 See Letter from David Siddall, Counsel to Nokia, to Kris Monteith, Chief, Policy Divis…

Text truncated - open the document above for the full version.

Nokia Mobile Phones (USA) Inc. 12278 Scripps Summit Drive San Diego, CA 92131 February 8, 2002 Federal Communications Commission, Authorisation & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Attention: Equipment Authorisation Branch I hereby certify that the transceiver FCC ID:GMLNSD-5FX complies with ANSI/IEEE C95.1- 1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz. Compliance was determined by testing appropriate parameters according to standard. NOKIA MOBILE PHONES, Inc. Jari Niemela Product Program Manager, Product Development, San Diego

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 February 26, 2002 RE: Nokia Mobile Phones FCC ID: GMLNSD-5FX I have a few comments on this Application. 1.) Section 3.2, 3.3, 3.4: does not apply to any PCS – Band only Part 24 phone. Constant envelope digital emissions are not affected by variations of audio input. 2.) Section 3.6 does not apply to any Part 24 digital phone. 3.) Section 3.7 second paragraph does not apply to any Part 24 digital phone. In addition, the final sentence of paragraph one is also irrelevant. 4.) Section 4.0: Was the device set to a “power off” condition when incrementing the temperature? 5.) Section 5.2: Please provide conducted Pout values loaded on the antenna which provide these EIRP values. There are also contradictory references to ERP and EIRP. In addition, please provide the measurement bandwidth settings used. 6.) Section 10.1 Sample Calculation B applies satisfactorily to ERP readings but not EIRP. Part 24 requires this limit to be expressed in terms of EIRP. Assuming this calculation was used implicitly for transmitter radiated emissions, there would be an error. 7.) FYI: Please note that for SAR testing the FCC recognizes OET Bulletin 65, Supplement C and only uses IEEE P1528 as a reference. Front page of SAR report should be revised 8.) SAR report indicates only one battery is used. This is contrary to pp.109 and 120 of Manual. Please resolve and retest if necessary. 9.) FYI: There is no such thing as Extended Uncertainty – the correct term is Expanded Uncertainty. 10.) In addition to the date, it is recommended that temperature of the tissue medium be shown on each plot. Temperature for all plots should stay within +/- 2 C. 11.) Both the left and right hand tests tilt position were performed on the same date [01/31/02] but the left hand side shows powerdrift of 0.00 db while the right hand side shows -0.22 db. In addition, body worn test shows a power gain of 0.14dB. It is difficult to imagine that power on a CDMA phone would vary from max to min by .36dB. Since Local Modes were used for testing per Operational Description, I find the variation in power confusing. Please address. 12.) Section 4.3 indicates SAM v4.0 phantom was used. Test plots identify SAM 1. Which is correct? 13.) Manual must indicate only CSL-28 beltclip approved for this device. In addition, please list separation distanced between phone and body. Can it be assumed that operation of this device when inside a shirt or pants pocket is not recommended? If so, please indicate as well in manual. 14.) No data presented using headset HDC-5. 15.) Reported SAR values should be stated in manual. William H. Graff President and Examining Engineer mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted.Any questions about the content of this correspondence should be directed to the sender.

Nokia Mobile Phones (USA) Inc. 12278 Scripps Summit Drive San Diego, CA 92131 FCC ID : GMLNSD-5FX FRN : 0006-3590-95 Subject : Nokia responses to ATCB comments of February 26, 2002 Comments numbered 1) through 6) have been addressed by PCTest and they have modified the test report accordingly, the test report has been uploaded to the ATCB server. Comment number 7) has been forwarded to our SAR lab in Oulu and their response was that they cannot change the cover since the testing was already performed according to IEEE P1528. We believe that IEEE P1528 encompasses the relevant information of OET Bulletin 65 supplement C, and since it is more comprehensive it should represent worst case SAR levels. Comment number 8), there is only one battery used for this product, but there was a typographical error in the User Guide that referred to "batteries" instead of "battery", that has been corrected and the new User Guide has been uploaded to the ATCB server. Comment number 9), the term "Expanded Uncertainty" is more appropriate and will be used future reports. Comment number 10), although the SAR scans of this report do not have the liquid temperature listed, the temperature was monitored and in future reports we should list the temperature of the liquid for every scan during the SAR test. Comment number 11) implies the test was done in local mode, but the test was performed using a base station simulator. Due to this and other factors such as liquid settling and battery capacity it is difficult to control the drift to less than +.14 dB to -.22 dB during a 20 minute SAR scan. We choose to submit the data with the existing drift since the SAR values could easily pass the FCC limit even if the .22 dB drift were added to the worst case SAR values. Comment number 12), the Samv4.0 was used for the SAR test, the number "1" listed on the SAR scans is an internal Nokia reference for the SAR lab which has several Samv4.0 phantoms, and each Samv4.0 has a different number so that the lab can document which of their phantoms was used for the various tests. Comment number 13), the belt clip warning has been added to the User Guide and can be seen on page 109, the seperation distance to the body is indicated in the photo of the body SAR test using the flat phantom, in the SAR report. On page 109 of the User Guide, the user is told to place the phone in the specific belt clip that has been tested for compliance when carrying the phone while it is on. Comment 14) states that no data is presented using the headset, however the body SAR measurement was done exclusively with the headset because the phone can not be used on the body without the headset. Comment 15) states that the reported SAR values should be stated in the manual. The worst case SAR values are listed on page 108 of the User Guide.

Nokia Mobile Phones (USA) Inc. 12278 Scripps Summit Drive San Diego, CA 92131 Tel. (858) 831-5000 February 8, 2002 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Attention: Equipment Authorization Branch REQUEST FOR CONFIDENTIALITY Pursuant to Sections 0.457 (d) (1) (ii) and 0.459 of the Commission's Rules, the applicant hereby requests confidential treatment of some of the information accompanying this application of FCC ID:GMLNSD-5FX and as outlined below: - block diagram - schematic diagrams - description of circuitry / theory of operation - list of active devices - part list - tune-up procedures These materials contain trade secrets and proprietary information not customarily released to the public and the public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457 (d) (1) (ii) disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. NOKIA MOBILE PHONES, Inc. Jari Niemela Product Program Manager, Product Development, San Diego

© 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA)

January 17, 2002 Confidential Applicant: Nokia Mobile Phones, IncFCC ID: GMLNSD-5FX Copyright © 1999 Nokia Mobile Phones, Inc. January 17, 2002 Confidential Applicant: Nokia Mobile Phones, IncFCC ID: GMLNSD-5FX Copyright © 1999 Nokia Mobile Phones, Inc.

© 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA) © 2002 PCTEST Lab FCC ID: GMLNSD-5FX (Model: 8270) NVLAP Lab Code: 100431-0 NOKIA Single-Mode PCS Phone (PCS CDMA)

Applicant: Nokia Mobile Phones, Inc.FCC ID: GMLNSD-5FX Copyright  1998 Nokia Mobile Phones, Inc. Confidential February 8, 2002 Theory of Operation Vocabulary CS=Cellular System CDMA =Code Division Multiple Access HW=Hardware (drivers) RAM=Random-Access Memory ROM=Read-Only Memory SPEC=Specification SW=Software Technical Summary The GMLNSD-5FX is a radio transceiver unit for the CDMA 1900 networks. It is a power class II at 1900 MHz providing power from –50 to +23.7 dBm in CDMA. The transceiver is a true 3 V transceiver. Transceiver has 15733 (13.3 kbps) and IS127 (EVRC) speech codes. The transceiver consists of system/RF module, that is called Engine, and User interface module and assembly parts. The transceiver has full graphic display and soft key based user interface. The antenna is fixed. External antenna connection is provided by bottom RF connector. The transceiver has leak tolerant earpiece OMNI type microphone. Circuit Description The engine consists of a Baseband/RF module with connections to a separate user interface module. Baseband and RF modules are interconnected with PCB wiring. The phone can be connected to accessories via the bottom System connector and the Intelligent Battery Interface (IBI) connector. The RF sub-module receives and demodulates radio frequency signals from the base station and transmits modulated RF signals to the base station. It consists of functional sub-modules Receiver, Frequency Synthesizer and Transmitter. The Baseband module contains audio, control, signal processing and power supply functions. It consists of functional sub-modules MAD4, MCU, DSP, logic and memories, CCONT, regulators and charging and CAFÉ. Applicant: Nokia Mobile Phones, Inc.FCC ID: GMLNSD-5FX Copyright  1998 Nokia Mobile Phones, Inc. Confidential February 8, 2002 Basic Specifications: Table 2. Basic Specifications ParameterCDMA 1900 Cellular systemJ-STD-018, J-STD-008 TX frequency band1850-1990 MHz RX frequency band1930-1990 MHz Duplex spacing80 MHz Number of RF channels1150 Channel spacing50 kHz Output power234.4 mW (+23.7 dBm) Power levels-50 to +23.7 dBm CDMA Method of frequency synthesis Three digital phase locked loops VHF 416.2 MHz for Tx VHF 256.2 MHz for Rx UHF 2058.1 – 2118.1 MHz for Tx & Rx Frequency control19.2 MHz VCTCXO: AFC used Receiver typeLinear, single IF Modulator typeOQPSK Applicant: Nokia Mobile Phones, Inc.FCC ID: GMLNSD-5FX Copyright  1998 Nokia Mobile Phones, Inc. ConfidentialFebruary 8, 2002 Technical Specifications Modes of Operation GMLNSD-5FX operates in Cellular PCS mode and a local mode for service: - PCS mode: phone controlled by Cellular System SW and partly by basestation - Local mode: used by Production and Aftersales Power Off In the power-off mode, only CCONT is active. Power-off mode can be left by pushing the PWR- key, connecting charger to the phone, real time clock interrupt or intelligent battery interrupt. Idle/standby The phone is in Idle in CDMA, listening to the network and waiting for the page. Call The phone call is going on and during most of the time all RF and Baseband parts are on. Separate parts are turned off when they are not needed in order to save power. Local Mode Local mode is used for testing purposes by the Nokia Product Development group, Nokia Production and Service Providers. The Cellular Software is stopped (no signaling to basestation), and the phone is controlled by MBUS/FBUS messages by the controlling PC.

PC Site Oulu Exhibit 11: SAR Report DTX03852-EN Applicant: Nokia Ltd FCC ID: GMLNSD-5FX Copyright  2002 Nokia Corporation 1 (13) SAR Compliance Test Report Test report no.: Not numbered Date of report: 2002-02-19 Number of pages: 50 Contact person: Olli Kautio Responsible test engineer: Pertti Mäkikyrö Testing laboratory: Nokia Corporation Elektroniikkatie 10 P.O. Box 50 FIN-90571 OULU Finland Tel. +358-7180-08000 Fax. +358-7180-47222 Client: Nokia Inc. 12278 Scripps Summit Dr. San Diego, CA 92131 U.S.A. Tel. +1 858 831-5000 Fax. +1 858 831-6500 Tested devices: GMLNSD-5FX CSL-28 Supplement reports: - Testing has been carried out in accordance with: IEEE P1528-200X Draft 6.4 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques Documentation: The documentation of the testing performed on the tested devices is archived for 15 years at PC Site Oulu Test results: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Date and signatures: 2002-02-19 For the contents: Pertti Mäkikyrö Engineering Manager, EMC Miia Nurkkala Test Engineer PC Site Oulu Exhibit 11: SAR Report DTX03852-EN Applicant: Nokia Ltd FCC ID: GMLNSD-5FX Copyright  2002 Nokia Corporation 2 (13) CONTENTS 1.SUMMARY FOR SAR TEST REPORT ..........................................................................................................................3 1.1 MAXIMUM RESULTS FOUND DURING SAR EVALUATION.................................................................................................................. 3 1.1.1Head Configuration.......................................................................................................................................................... 3 1.1.2Body Worn Configuration............................................................................................................................................... 3 1.1.3Measurement Uncertainty ............................................................................................................................................. 3 2.DESCRIPTION OF TESTED DEVICE .............................................................................................................................4 2.1 PICTURE OF PHONE........................................................................................................................................................................... 4 2.2 D ESCRIPTION OF THE ANTENNA........................................................................................................................................................ 4 2.3 B ATTERY OPTIONS............................................................................................................................................................................. 4 2.4 B ODY WORN ACCESSORIES.............................................................................................................................................................. 4 3.TEST CONDITIONS ........................................................................................................................................................5 3.1 AMBIENT CONDITIONS...................................................................................................................................................................... 5 3.2 RF CHARACTERISTICS OF THE TEST SITE.................................................................…

Text truncated - open the document above for the full version.