GQK-HM628NTablet POS

1 Tablet POS HM628N User Guide 2 Safety Precautions  Do not subject the device to severe impact or drop it from heights.  Do not use the device in extreme hot or cold, dusty or damp conditions. Do not expose it to direct sunlight.  Avoid using the device near strong magnetic fields.  Normal functioning of the product may be disturbed by ESD. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.  Keep the device away from water and other liquids. In the event that water or other liq- uids enter the device, power off the product immediately and clean the device.  Do not use chemicals to clean the device in order to avoid corrosion. Clean it with a dry cloth.  Do not click the charging tablet on charging dock which is only used for charging. Do- ing so may cause abnormal combination of tablet and dock.  Do not pull the table adjusting the rotation angle of Smart dock.  Do not adjust rotation angle frequently and extremely.  Do not install this equipment in a confined space such as a book case or similar unit. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.  No naked flame sources, such as lighted candles, should be placed on the apparatus.  Attention should be drawn to environmental aspects of battery disposal.  Use the apparatus in moderate climates.  We are not responsible for damage or lost data caused by malfunction, misuse, modifi- cation of the device or battery replacement.  Do not attempt to disassemble, repair or modify the product. This will invalidate the warranty.  If the device will not be used for an extended period of time, please charge the battery at least once per month to maintain battery life.  Charge the battery if: a) The battery level icon displays (An empty battery) b) The device powers off automatically when restarted. c) There is no response when pressing keys with keys unlocked and battery full.  Do not interrupt the connection when the device is being formatted or transferring files. Otherwise, data may be corrupted or lost.  When the device is used as a portable HD, please use only per the instructions. Other- wise, permanent data loss could occur.  Please use and install data using the attachments/accessories provided and only accord- ing to the manufacturer’s instruction.  Please refer to the information on the bottom of the device for electrical and safety in- formation before installing data or operating the device.  To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. 3 The device should not be exposed to dripping or splashing. Never place objects filled with liquids, such as vases, on the device.  There is danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.  The battery (battery or batteries or battery pack) should not be exposed to ex- cessive heat such as sunlight, fire or the like.  Please follow responsible procedures for battery disposal.  If the power adaptor disconnected from the device, the device will remain operable as long as the battery has sufficient charge.  The power adaptor is a CLASS II apparatus with double insulation, and no external ground is provided.  Safety symbol explanation: -The lightning flash with arrowhead symbol within an equilateral triangle is in- tended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. -The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the device. -Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household waste in the EU. To prevent possi- ble harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To dispose of your used device, please use the return and collection systems available in your area or contact the retailer where the product was purchased. They can take this product for safe environmental recycling. Th e product is compliant with CE / RoHS regulations. 4 Listening Cautions  This product respects the current regulations for limiting the output volume of consumer audio devices to a safe level. By listening to your device with headphones or earbuds at high volumes, you run the risk of permanent damage to your ears. Even if you get used to listening at high volumes and it seems normal to you, you still risk the possibility of damaging your hearing. Reduce the volume of your device to a reasonable level to avoid permanent hearing damage. If you hear ringing in your ears, reduce the volume or shut off your device. This device has been tested with the supplied earphones. In order to preserve your hearing, it is advised that you use only the following headphone models: the earphones supplied with your device, or any other headphones that respect the cur- rent regulations. Other types of headphones may produce higher volume levels.（At full power ,the prolonged listening of the walkman can damage the ear of the use）  Do not use while operating a motorized vehicle. It may create a traffic hazard and is il- legal in many areas.  You should use extreme caution or temporarily discontinue use in potentially hazardous situations created by obstructed hearing.  Even if your headphones or earphones are the open-air type designed to let you hear outside sounds, don’t turn up the volume so high that you can’t hear what’s a…

Text truncated - open the document above for the full version.

Qingdao Hisense Intelligent Commercial System Co., Ltd. Statement We Qingdao Hisense Intelligent Commercial System Co., Ltd. Hereby Declare that The product Tablet POS, models no. HM628N, HM628 are all identical in interior structure, electrical circuits and components, and just the model names are different for the marketing requirement. Your assistance on this matter is highly appreciated. Yours sincerely, Signature: Company Name: Qingdao Hisense Intelligent Commercial System Co., Ltd.

January 25, 2021 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Qingdao Hisense Intelligent Commercial System Co., Ltd./ 399 Songling Road, Laoshan,Qingdao,China <Signature>： Name：tongjin Chu Title：Technical Director Applicant Company：Qingdao Hisense Intelligent Commercial System Co., Ltd.

January 25, 2021 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: GQK-HM628N Product Name: Tablet POS Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature>： Name：tongjin Chu Title：Technical Director Applicant Company：Qingdao Hisense Intelligent Commercial System Co., Ltd.

Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this devicemay not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation . Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this devicemay not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation . Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this devicemay not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation . Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this devicemay not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation . Made in China Model HM628 : Tablet POS Rated voltage: 12V Rated current: 2A S N / :******************* Qingdao Hisense Intelligent Commercial System Co., LTD. 399 Songling Road, Laoshan District, Qingdao, China FCC ID: GQK-HM62 8 N Made in China Model HM628 :N Tablet POS Rated voltage: 12V Rated current: 2A S N / :******************* Qingdao Hisense Intelligent Commercial System Co., LTD. 399 Songling Road, Laoshan District, Qingdao, China FCC ID: GQK-HM62 8 N Made in China Model HM628 : Tablet POS Rated voltage: 12V Rated current: 2A S N / :******************* Qingdao Hisense Intelligent Commercial System Co., LTD. 399 Songling Road, Laoshan District, Qingdao, China FCC ID: GQK-HM62 8 N Made in China Model HM628 :N Tablet POS Rated voltage: 12V Rated current: 2A S N / :******************* Qingdao Hisense Intelligent Commercial System Co., LTD. 399 Songling Road, Laoshan District, Qingdao, China FCC ID: GQK-HM62 8 N

Label Location

FCC ID: GQK-HM628N RF Exposure Applicable Standard According to §1.1307(b)(5), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Portable device. The Section 4.3.1 and Appendix A of KDB447498 D01 V05 was used as the guidance. Calculation Result (Worse case—802.11b) [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] =7.98/5 * 1.57= 2.51, this value is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. The SAR measurement is not necessary.

Report No.: TW2012217-02E File Reference No.: 2021-01-16 Applicant: Qingdao Hisense Intelligent Commercial System Co., Ltd. Product: Tablet POS Model No.: HM628N, HM628 Trademark: N/A Test Standards: FCC Part 15.247 Test Result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.10, FCC Part 15.247 for the evaluation of electromagnetic compatibility Approved By Jack Chung Manager Dated: January 16, 2021 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at SHENZHEN TIMEWAY TESTING LABORATORIES Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China Tel (755) 83448688, Fax (755) 83442996, E-Mail:[email protected] Report No.: TW2012217-02E Page 2 of 80 Date: 2021-01-16 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Special Statement The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19. The testing quality system of our laboratory meet with ISO/IEC-17025 requirements, which is approved by CNAS. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: CNAS-LAB Code: L2292 The EMC Laboratory has been assessed and in compliance with CNAS-CL01 accreditation criteria for testing Laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the Competence of testing Laboratories. FCC-Registration No.: 744189 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 744189. Industry Canada (IC) —Registration No.:5205A The EMC Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 5205A. A2LA (Certification Number:5013.01) The EMC Laboratory has been accredited by the American Association for Laboratory Accreditation (A2LA). Certification Number:5013.01 Report No.: TW2012217-02E Page 3 of 80 Date: 2021-01-16 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ……………………..…………………………..……………………………..…4 1.1 Test Lab Details…………………………………………………………..………………….…… 4 1.2 Applicant Details………………………………………………………….……………….…….. 4 1.3 Description of EUT ……………………………………………………………..………….…… 4 1.4 Submitted Sample………………………..……………………………………..……………….. 5 1.5 Test Duration…………………………………….…………………………………..…….……... 5 1.6 Test Uncertainty……………………………………….……………………………...…………... 5 1.7 Test By……………………………………………………………………………………………. 5 2.0 List of Measurement Equipment…………………………………………………………….… 6 3.0 Technical Details………………………………………………………………………………… 7 3.1 Summary of Test Results…………………………………………………………………………. 7 3.2 Test Standards…………………………………………………………………………………….. 7 4.0 EUT Modification………………………………………………………………………………... 7 5.0 Power Line Conducted Emission Test……………………………………………………………. 8 5.1 Schematics of the Test……………………………………………………………………………. 8 5.2 Test Method and Test Procedure…………………………………………………………………. 8 5.3 Configuration of the EUT………………………………………………………………………… 8 5.4 EUT Operating Condition………………………………………………………………………… 9 5.5 Conducted Emission Limit……………………………………………………………………….. 9 5.6 Test Result………………………………………………………………………………………... 9 6.0 Radiated Emission test………………………………………………………………………….. 12 6.1 Test Method and Test Procedure…………………………………………………………………. 12 6.2 Configuration of the EUT………………………………………………………………………… 13 6.3 EUT Operation Condition………………………………………………………………………… 13 6.4 Radiated Emission Limit…………………………………………………………………………. 13 7.0 20dB Bandwidth …………………………..………………….…..………………….………….. 24 8.0 Maximum Output Power……….……………………………………………………………..….. 36 9.0 Carrier Frequency Separation……………………………………………………………………. 39 10.0 Number of Hopping Channel…………………………………………………………………….. 43 11.0 Time of Occupancy (Dwell Time)……………………………………………………………….. 47 12.0 Out of Band Measurement……………………………………………………………………….. 60 13.0 Antenna Requirement……………….…………………………………………………………… 77 14.0 FCC ID Label………………...………….………………………………...……………….…….. 78 15.0 Photo of Test Setup and EUT View………………………

Text truncated - open the document above for the full version.

Conducted Emission Te s t Setup: Radiated Emission Te s t Setup: