GZM802120Web PAD

User’s Manual LCD 12” COLOR PROSCRIBE CMPD12 Copyright © 2005 FIMI S.r.l. Saronno - Italy All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Printed in Italy (Rev. 0,1) W 2 CMPD12 Copyright © This manual is copyrighted with all rights reserved. Under the copy rights law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format. The monitor described in this manual, has been certified/registered by the safety agencies/regulatory authorities as model n° : CMPD12 FCC Notice This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, while can be determined by turning the equipment Off and On, the user is encouraged to try to correct the interference by one or more of the following measures. - Re orient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio TV technician for help. Modification The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded signals cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. The lighting flash with arrowhead symbol is intend to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electrical shock to people. The exclamation mark is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in literature accompanying the appliance. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO AVOID THE RISK OF ELECTRICAL SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING: THE ENCLOSURE HAS TO BE CHECKED UPON COLLISION DAMAGE; REFER TO QUALIFIED SERVICE PERSONNEL RF Exposure Statement This EUT is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 1.5 cm during normal operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3 CMPD12 1.1.0 TECHNICAL INFORMATION Processor VIA Low Voltage VIA Eden or C3™-M running at 800MHz and 1GHz (BGA, 133MHz FSB, 64KB L2 cache, 0.13 micron process with 7watt-Thermal-Design-Power) Chipset VIA CN400 + VT8237R Bios Insyde version VA03, with the kernel-code-base V4.31 Operating System Microsoft Windows XP Embedded with SP2 Networking Built-in 802.11g mini-PC WLAN module with integral antenna Remote Protocol Microsoft RDP / Citrix ICA Memory 256 MB SDRAM on board Flash ROM 512 MB flash memory module LCD Panel Characteristic 12.1 “ TFT LCD panel (Mini required : XGA 1024 x 768 resolution for 12.1” ) , LVDS I/F Audio System AC97 internal microphone and speaker; stereo (supported via earphone jack) Durability Rugged anti-shock design with standing 3 feet drop / IP53 water and dust resistent construction PAD I/O •1 x VGA out •2 x USB •1 x Network connector (RJ45) •1 x Audio jack for external earphone •1 x Audio jack for external microphone •1 x DC-in jack •1 x PCMCIA •1 x SMART card •1 x Docking connector •1 x Speaker •1 x Modular connector •1 x Internal microphone Docking device I/O •1 x DC-in jack •1 x PAD connector •3 x USB •1 x Network connector (RJ45) LED indicator •1 x WLAN LED •1 x Power LED Button AND Controls • 4 x Customized hot key • 1 x Input panel • 1 x Four-way direction key with Enter • 1 x Power switch • 1 x Stylus release • 2 x Battery latch Power Supply • Battery: Swappable smart Li-ion battery pack • AC_IN 100 ~ 240V (1,5A) 50/60Hz - DC_Out 19V (3.42A) Included Accessory • Battery • AC adapetr and power cord • 1 x Stylus Optional accessories • Hand strip • Kickstand 4 CMPD12 6.1.0 INPUT INSTRUCTION 6.1.1 RIGHT VIEW 1. Power botton 2. Network connector (RJ45) 3. RGB video connector 4. USB 2.0 port type A 5. USB 2.0 port type B 6. External ear set jack 7. External microphone jack 8. AC/DC adapter connector 6.1.2 LEFT VIEW 1. Smart card slot 2. Stylus pen latch release 3. Flash slot 4. Stylus pen 5. PCMCIA slot 6. Security cable slot 1 2 3 4 5 8 7 6 5 6 3 4 2 1 5 CMPD12 1 6.1.3 BOTTOM VIEW 1. Docking device slot 6.1.4 BACK VIEW 1. Speackers 2. Mounting screw holes (x4) M2,5 3. Battery latch 1 (lock) 4. Hand strip (optional) 5. Battery 6. Battery latch 2 7. Kickstand (optional) 8. Memory module cover 9. Processor fanless heatsink air vent 1 3 9 1 1 2 5 6 8 4 7 6 CMPD12 7.1.0 CONTROL PANEL DESCRIPTION 1. Battery LED 2. Programmable buttons 3. Track stick buttons 4. Track stick 5. Programmable buttons 6. OSD keyboard (…

Text truncated - open the document above for the full version.

APPENDIX A. Photographs of EUT

SPORTON International Inc. PAGE NUMBER : A1 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,26,2005 FAX : 886-2-2696-2255

SPORTON International Inc. PAGE NUMBER : A10 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A11 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A12 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A13 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A14 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A15 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A16 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A17 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A18 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A19 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A20 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A21 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A22 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A23 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A24 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A25 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A26 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A27 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A28 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A29 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A30 OF A30 TEL : 886-2-2696-2468 ISSUED DATE : Dec,23,2005 FAX : 886-2-2696-2255

©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 Specific Absorption Rate (SAR) Test Report for MoBitS Electronics, Inc. on the Web PAD Report No. : FA5O2116-1-2-01 Model (Trade) Name : MONTBLANC_12 (MoBitS) CMPD12 (Philips / FIMI) FCC ID : GZM802120 Date of Testing : Dec. 12, 2005 Date of Report : Dec. 13, 2005 Date of Review : Dec. 13, 2005 ‚ The test results refer exclusively to the presented test model / sample only. ‚ Without written approval of SPORTON International Inc., the test report shall not be reproducedexcept in full. SPORTON International Inc. 6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C. 1190 ILAC MRA ©2005 SPORTON International Inc. SAR Testing Lab Rev. 01 Tel:886-22696-2468 Fax:886-2-2696-2255 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 Table of Contents 1. Statement of Compliance .......................................................................................................1 2. Administration Data ................................................................................................................2 2.1 Testing Laboratory..................................................................................................................................... 2 2.2 Detail of Applicant ..................................................................................................................................... 2 2.3 Detail of Manufacturer ............................................................................................................................... 2 2.4 Application Detail ...................................................................................................................................... 2 3. Scope .......................................................................................................................................3 3.1 Description of Device Under Test (DUT) .................................................................................................... 3 3.2 Product Photo ........................................................................................................................................... 4 3.3 Applied Standards: .................................................................................................................................... 5 3.4 Device Category and SAR Limits............................................................................................................... 6 3.5 Test Conditons .......................................................................................................................................... 6 3.5.1 Ambient Condition: .......................................................................................................................... 6 3.5.2 Test Configuration: ........................................................................................................................... 6 4. Specific Absorption Rate (SAR) .............................................................................................7 4.1 Introduction ............................................................................................................................................... 7 4.2 SAR Definition........................................................................................................................................... 7 5. SAR Measurement Setup........................................................................................................8 5.1 DASY4 E-Field Probe System ................................................................................................................... 9 5.1.1 ET3DV6 E-Field Probe Specification .............................................................................................. 10 5.1.2 ET3DV6 E-Field Probe Calibration ................................................................................................. 10 5.2 DATA Acquisition Electronics (DAE)......................................................................................................... 11 5.3 Robot ...................................................................................................................................................... 12 5.4 Measurement Server............................................................................................................................... 12 5.5 SAM Twin Phantom................................................................................................................................. 12 5.6 Data Storage and Evaluation ................................................................................................................... 14 5.6.1 Data Storage.................................................................................................................................. 14 5.6.2 Data Evaluation ............................................................................................................................. 14 5.7 Test Equipment List ................................................................................................................................. 17 6. Tissue Simulating Liquids ....................................................................................................18 7. Uncertainty Assessment.......................................................................................................20 8. SAR Measurement Evaluation..............................................................................................22 8.1 Purpose of System Performance check ................................................................................................... 22 8.2 System Setup...................................................................................................................…

Text truncated - open the document above for the full version.

©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01 ©2005 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev.01 FCC SAR Test Report Test Report No ﹕ FA5O2116-1-2-01

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: RF-15.247-a FCC RADIO TEST REPORT Applicant’s company MoBitS Electronics, Inc. Applicant Address 3F-1, 250, Jung-Shan Rd., Linkou Shiang, Taipei Hsien, Taiwan, R.O.C. FCC ID GZM802120 Manufacturer’s company MoBits Electronics, Inc. Manufacturer Address 1st FL. 30 Kong Yuan RD. Kuei Shan Shiang, Tao Yuan Shien, Taiwan, R.O.C. Product Name Web PAD Brand Name (Model Name) Philips (CMPD12), MoBitS (MONTBLANC_12), FIMI (CMPD12) Test Rule Part(s) 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Receive Date Oct. 21, 2005 Test Date Dec. 19, 2005 Submission Type Original Equipment Statement The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Lab Code: 200079-0 Report No.: FR5O2116 Report Format Version: RF-15.247-a Page No. : i of ii FCC ID: GZM802120 Issued Date : Dec. 20, 2005 Table of Contents 1. CERTIFICATE OF COMPLIANCE ............................................................................................................................ 1 2. SUMMARY OF THE TEST RESULT ............................................................................................................................. 2 3. GENERAL INFORMATION ..................................................................................................................................... 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories.........................................................................................................................................................................................3 3.3. Table for Filed Antenna.......................................................................................................................................................................3 3.4. Table for Carrier Frequencies...............................................................................................................................................................4 3.5. Table for Test Modes............................................................................................................................................................................4 3.6. Table for Testing Locations...................................................................................................................................................................4 3.7. Table for Supporting Units....................................................................................................................................................................5 3.8. Table for Parameters of Test Software Setting.......................................................................................................................................5 3.9. Test Configurations..............................................................................................................................................................................6 4. TEST RESULT ......................................................................................................................................................... 8 4.1. AC Power Line Conducted Emissions Measurement............................................................................................................................8 4.2. Maximum Peak Output Power Measurement....................................................................................................................................13 4.3. Power Spectral Density Measurement...............................................................................................................................................15 4.4. 6dB Spectrum Bandwidth Measurement...........................................................................................................................................20 4.5. Radiated Emissions Measurement.....................................................................................................................................................25 4.6. Band Edge Emissions Measurement..................................................................................................................................................45 4.7. Antenna Requirements......................................................................................................................................................................50 5. LIST OF MEASURING EQUIPMENTS....................................................................................................................... 51 6. SPORTON COMPANY PROFILE ........................................................................................................................... 53 6.1. Test Location.....................................................................................................................................................................................53 7. CERTIFICATE OF NVLAP ACCREDITATION ............................................................................................................ 54 APPENDIX A. PHOTOGRAPHS OF EUT ........................................................................................................... A1 ~ A30 APPENDIX B. TEST PHOTOS .....................…

Text truncated - open the document above for the full version.

Report No.: FR5O2116 FCC ID: GZM802120 Page No. : 1 of 3 Appendix B. Test Photos Report No.: FR5O2116 FCC ID: GZM802120 Page No. : 2 of 3 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR5O2116 FCC ID: GZM802120 Page No. : 3 of 3 2. Photographs of Radiated Emissions Test Configuration FRONT VIEW REAR VIEW