H38AW-8TWireless Microphone

TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG ON INSTRUCTION MANUAL WIRELESS MICROPHONE SYSTEM AW-8T R 1 E INTRODUCTIOM: 1. The model is Plug-on transmitter.2. It is designed for turning the cable hand - held dynamic microphone into a wireless mic- rophone. FEATURE: MIC.INPUT (XLR) RELEASE BUTTON9V BATTERY CHAMBER 1.2. 3. BOTTOM VIEWCHANNEL SWITCH 4. 5 . POWER SWITCHBATTERY LIGHT 6. 7. POWER ON OFF Wireless Transmitter AW-8T PLL 6 7 R CHANNEL 1 3 5 2 4 2 E . DimensionsWeightCarrier Frequency RangePower SourceTone Osc.FrequencyRF Power Output SPECIFICATION TRANSMITTER PERFORMANCE SPECIFICATION: 80g(0.18lb)117mm/4.6"UHF 790-865 Mhz>45dBcDC 9V30mA 1% 5mW (TYPE) MODEL: AW-8T DATE:7,27,2001 TESTER:T.S.HER NO. 1 2 3 5 4 7 6 98 Spurious EmissionTatol Harmonic DistortionCurrent 32.768KHz ELECTRIC PARAMETER SPECIFICATION TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG ON BATTERY INSTALLATION:MICROPHONE CONNECTION Please press firmly insure locking. TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG INSTRUCTION: 1. AFTER OPERATION THE MICRO MUST BE SWITCHED OFF PHONE OTHERWISE AS WELL. T SOON BE EXHAU THE BAT ERIES WILL STED. IN ORDER TO AVOID UNTUNEFUL IF PILOT LAMP CONSUPMPTIO OF THE INNER BATTERY: OF THE WIRELESS MICROPHONE IT MEANS (1)REMAINS LIGHTED, THAT THE BATTERY HAS NO MORE POWER: (2)THE FLASH ONLY FOR THE TIME OF THE SWITCHING -ON; THIS INDICATES THAT THE MICROPHONE WORKS WELL. 2. INSTALL BATTERY: PLS. MAKE SURE THE POSITIVE/NEGATIVE BEFORE YOU REPLACEMENT BATTERIES. LAMP MUST WE CONGRATULATE YOU FOR THE CHOICE OF THIS EXCELLENT PROFESSIONAL HIGH FIDELITY. SPEECH, MEETING SPEECH, THE MICROPHONE SUIT FOR SCHOOL TEA STAGE. TO AVOID OF PROBLEM LIKE WIRELESS CHERS AND PERFORMER ON THE MICROPHONE. NECTION IN EVERY WORKING THE BODY PACK MICROPHONE CON CONDITION. APPARATUS MICROPHONE WHICH WILL GIVE YOU OUTSTANDING RESULTS AT THE WHEN SWITCHES THE POWER SWITCH TO "ON" POSITION ,THEN THE POWER INDICATORLIGHTS ,INDICATS THE APPARATUS IS ON.WHEN SWITCHES THE POWER SWITCH TO "OFF"POSITION ,THEN THE POWER INDICATOR EXINDICATS THE APPARATUS IS OFF. 3. 4. IF YOU WANT TO HAVE A DIFFERENT FREQUENCY, SET THE RECEIVER AND TRANSMITTER POWER SW TO OFF BEFORE YOU DO.

Request for Confidentiality 22 September 2003 EMCCert DR. RAŠEK - Certification Institute- Boelwiese 5 D-91320 Ebermannstadt RE: Certification Application FCC ID: H38AW-8T Please be advised that the following information is to be held confidential on behalf of SEKAKU ELECTRON INDUSTRY Co. Ltd.: • Schematics • Parts Lists • Block Diagram • Technical Description The application contains technical information which SEKAKU ELECTRON INDUSTRY Co. Ltd.deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter.

FCC ID: H38AW-8T FCC ID: H38AW-8T

FCC ID: H38AW-8T

FCC ID: H38AW-8T Internal Photos Page 1 of 6 FCC ID: H38AW-8T Internal Photos Page 2 of 6 FCC ID: H38AW-8T Internal Photos Page 3 of 6 FCC ID: H38AW-8T Internal Photos Page 4 of 6 FCC ID: H38AW-8T Internal Photos Page 5 of 6 FCC ID: H38AW-8T Internal Photos Page 6 of 6

EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 1 of 32 Pages Straubing, 16 April 2003 T E S T - R E P O R T No. 56408-20824 for AW-8T Wireless Microphone Transmitter Applicant: SEKAKU Electron Industry Co. Ltd Purpose of testing: To show compliance with FCC Code of Federal Regulations, Part 74 Subpart H, section 74.861 Note: The test data of this report relate only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 2 of 32 Pages Table of Contents 1. Administrative Data.....................................................................................3 2. Identification of Test Laboratory .................................................................4 3. Operation Mode of EUT..............................................................................5 4. Configuration ..............................................................................................6 5. Measuring Methods ....................................................................................7 5.1. Maximum Transmitter Power (§ 2.1046 (a), 74.861 (e)) ......................7 5.2. Mean power of emissions 30 MHz – 1 GHz (§ 74.861.e.6.iii)........................................................................................9 5.3. Radiated Emission > 1 GHz (§ 74.861.e.6.iii) ....................................10 5.4. Emission Masks (Occupied Bandwidth) § 2.1049 (c) (1)....................11 5.5. Audio Frequency Response, 2.1047 (a).............................................12 5.6. Modulation Limiting, § 2.1047 (b) .......................................................13 5.7. Frequency Stability (Temperature Variation), § 2.1055 (a) (1) .................................................................................................14 5.8. Frequency Stability (Voltage Variation), § 2.1055 (b) (1) ...................15 6. Photographs Taken During Testing ..........................................................16 7. List of Measurements ...............................................................................18 8. Referenced Regulations ...........................................................................31 Charts taken during testing ...............................................................................32 EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 3 of 32 Pages 1. Administrative Data Test item (EUT) Type designation AW-8T Serial number(s): 001 Type of equipment: Wireless Microphone Transmitter Parts/accessories: FCC-ID: Technical data Frequency range 794 – 805 MHz Operational frequencies 794.300 MHz, 799.600 MHz, 804.3 MHz Type of modulation 130KF3E Pulse frequency N/A Pulse width N/A Antenna Integrated Power supply 9 V Battery Applicant: (full address) SEKAKU Electron Industry Co. Ltd. No. 1 Lane 17, Sec. 2, Han Shi West Road Taichung 401, Taiwan, R.O.C. Contract identification: --- Contact person: Joan Wu Manufacturer: SEKAKU Electron Industry Co. Ltd. Application details Receipt of EUT: 16 December 2002 Date of test: February 2003 Note: Responsible for testing: Johann Roidt Responsible for test report: Johann Roidt EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 4 of 32 Pages 2. Identification of Test Laboratory DETAILS OF THE TEST LABORATORY COMPANY NAME: Senton GmbH EMI/EMC Test Center ADDRESS: Aeussere Fruehlingsstrasse 45 D-94315 Straubing Germany LABORATORY ACCREDITATION: DAR-Registration No. TTI-P-G 062/94-40 FCC TEST SITE LISTING INDUSTRY CANADA TEST SITE REGISTRATION IC 3050 NAME FOR CONTACT PURPOSES: Mr. Johann Roidt TELEPHONE: (+49) (0)9421 5522-0 FAX: (+49) (0)9421 5522-99 PERSONNEL INVOLVED IN THIS TEST REPORT TECHNICAL DIRECTOR: Mr. Johann Roidt RESPONSIBLE FOR TESTING: Mr. Johann Roidt RESPONSIBLE FOR TEST REPORT: Mr. Johann Roidt SUMMARY OF TEST RESULTS The tested sample complies with the requirements set forth in the Code of Regulations Part 15 Subpart H, Section § 74.861 of the Federal Communication Commission (FCC. EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 5 of 32 Pages 3. Operation Mode of EUT Transmitter operating continuously, full tests were performed on lowest, middle and highest RF channel. With battery supply 9.00 V DC EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 6 of 32 Pages 4. Configuration Configuration of the EUT Not applicable Cables connected to the EUT Not applicable Peripheral devices connected to the EUT Not applicable EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 7 of 32 Pages 5. Measuring Methods 5.1. Maximum Transmitter Power (§ 2.1046 (a), 74.861 (e)) 5.1.1. Conducted Maximum Transmitter Power Rules and Specifications: Sections 2.1046 (a) Guide: ANSI/TIA/EIA-603-1992, Paragraph 2.2.11 Measurement Procedure: A spectrum analyzer / EMI test receiver is connected to the output of the transmitter power amplifier (conducted measurement) via dummy load while EUT was operating in transmit mode using the assigned frequency. The trace mode of the spectrum analyzer was set to max hold with: RBW = 100 kHz, VBW = 100 kHz, span = 1 MHz, sweep = 20 ms (auto mode) 5 8 3 1 6 4 7 2 Figure 1: Measurement setup for testing on antenna connector Test instruments used: No. Type Model Serial Number Manufacturer 01 Spectrum Analyzer FSP 30 100063 Rohde & Schwarz 08 Power Meter NRVS 836856/015 Rohde & Schwarz 09 Power Sensor NRV-Z52 837901/030 Rohde & Schwarz 18 Attenuator 20 dB 4776-20 9503 Narda 19 Attenuator 10 dB 4776-10 9412 Narda EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 8 of 32 Pages 5.1.2. Radiated Maximum Transmitter Power Radiated Maximum Transmitter Power was measured with detector-function of the spectrum analyzer set to positive peak and trace mode max hold: RBW…

Text truncated - open the document above for the full version.

EMV-Prüfzentrum EMI/EMC-Testcenter FCC-ID: Test Report No. 56408-20824 Page 17 of 32 Pages Test setup for radiated emission measurement 30 MHz – 8 GHz (fully anechoic room)