H38UPUR-82DRWireless Microphone Receiver

RR UP-82DR UP-81H/UP-881H/UP-83H/UP-883H/ UP-86H/UP-886H/UP-87CH/UP-887CH UP-88CH/UP-888CH UP-8P/UP-88P/UP-8G/UP-88G SEIKAKU TECHNICAL GROUP LIMITED No.1, Lane 17, Sec. 2, Han Shi West Road, Taichung, 401 TAIWAN Tel:886-4-22313737 Fax:886-4-22346757 http://www.show-pa.com e-mail: [email protected] All rights reserved to SEIKAKU. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. Copyright 2006 SEIKAKU GROUP cc NF02762-1.0 IMPORTANT! Please read this manual carefully before operating this unit for the first time. All rights reserved to SHOW. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. SAFETY RELATED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions. The symbol is used in the service do- cumentation to indicate that specific component shall be only replaced by the component specified in that docu- mentation for safety reasons. Protective grounding terminal. Alternating current /voltage. ON: Denotes the apparatus turns on. OFF: Denotes the apparatus turns off, be- cause of using the single pole switch, be sure to unplug the AC power to prevent any ele- ctric shock before you proceed your service. WARNING: Describes precautions that should be observed to prevent the danger of injury or death to the user. CAUTION: Describes precautions that should be observed to prevent danger of the apparatus. WARNING Power Supply Ensure the source voltage matches the voltage of the power supply before turning ON the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. External Connection The external wiring connected to the out- put hazardous live terminals requires installation by an instructed person, or the use of ready-made leads or cords. Do not Remove any Cover There are maybe some areas with high voltages inside, to reduce the risk of electric shock, do not remove any cover if the power supply is connected. The cover should be removed by the qual- ified personnel only. No user serviceable parts inside. Fuse To prevent a fire, make sure to use fuses with specified standard (current, voltage, type). Do not use a different fuse or short circuit the fuse holder. Before replacing the fuse, turn OFF the apparatus and disconnected the power source. Protective Grounding Make sure to connect the protective grounding to prevent any electric shock before turning ON the apparatus. Never cut off the internal or external pro- tective grounding wire or disconnect the wiring of protective grounding terminal. Operating Conditions This apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on this apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not use this apparatus near water. Install in accordance with the manufacturer's Hazardous live terminal . Disposing of this product should not be placed in municipal waste and should be separate collection. F8: 850.000-874.000(850-879)MHz F8: 850.000-874.000(850-879)MHz 1 2 3 4 5 6 7 8 9 10 11 12 Group1Group2Group3Group4Group5Group6Group7Group8Group9Group10Group11Group12 850.125 850.325 850.525 850.725 850.925 851.125 851.325 851.525 851.725 851.925 852.125 852.325 852.525 852.725 852.925 853.125 853.325 853.525 853.725 853.925 854.125 854.325 854.525 854.725 854.925 855.125 855.325 855.525 855.725 855.925 856.125 856.325 856.525 856.725 856.925 857.125 857.325 857.525 857.725 857.925 858.125 858.325 858.525 858.725 858.925 859.125 859.325 859.525 859.725 859.925 860.125 860.325 860.525 860.725 860.925 861.125 861.325 861.525 861.725 861.925 862.125 862.325 862.525 862.725 862.925 863.125 863.325 863.525 863.725 863.925 864.125 864.325 864.525 864.725 864.925 865.125 865.325 865.525 865.725 865.925 866.125 866.325 866.525 866.725 866.925 867.125 867.325 867.525 867.725 867.925 868.125 868.325 868.525 868.725 868.925 869.125 869.325 869.525 869.725 869.925 870.125 870.325 870.525 870.725 870.925 871.125 871.325 871.525 871.725 871.925 872.125 872.325 872.525 872.725 872.925 873.125 873.325 873.525 873.725 873.925 874.125 874.325 874.525 874.725 874.925 875.125 875.325 875.525 875.725 875.925 876.125 876.325 876.525 876.725 876.925 877.125 877.325 877.525 877.725 877.925 878.125 878.325 878.525 878.725 Remark: 1. The values with underlines should be scanned manually by adjusting UP/DOWN key. 2. The following channels can be used simultaneously without any interference. Group 1-1: 798.125 Group 2-1: 798.325 Group 2-2: 800.725 Group 2-5: 807.925 Group 3-4: 805.725 Group 5-1: 798.925 Group 5-8: 815.725 Group 7-1: 799.325 Group 8-6: 811.525 Group 12-2: 802.725 IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Only use attachments/accessories spec- ified by the manufacturer. Power Cord and Plug Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace- ment of the obsolete outlet. Protect the power cord from being walk- ed on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Cleaning When the apparatus needs a cleaning, you can blow off dust from the apparatus with a blower or clean with rag etc. Don't use solvents such as benzol, alcohol, or other fluids with very strong volatility and flammability for cleaning the apparat…

Text truncated - open the document above for the full version.

RR WIRELESS MICROPHONE SYSTEM www.show-pa.com UR-82DRSERIES No.1, Lane 17, Sec. 2, Han Shi West Road, Taichung, 401 TAIWAN Tel:886-4-22313737 Fax:886-4-22346757 http://www.show-pa.com e-mail: [email protected] All rights reserved to SEIKAKU. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. Copyright 2006 SEIKAKU GROUP cc UP-8H/8P88H//88P W I R E L E S S M I C R O P H O N E S Y S T E M U s e r ' s M a n u a l NF02763-1.0 IMPORTANT! Please read this manual carefully before operating this unit for the first time. All rights reserved to SHOW. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. SAFETY RELATED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions. The symbol is used in the service do- cumentation to indicate that specific component shall be only replaced by the component specified in that docu- mentation for safety reasons. Protective grounding terminal. Alternating current /voltage. ON: Denotes the apparatus turns on. OFF: Denotes the apparatus turns off, be- cause of using the single pole switch, be sure to unplug the AC power to prevent any ele- ctric shock before you proceed your service. WARNING: Describes precautions that should be observed to prevent the danger of injury or death to the user. CAUTION: Describes precautions that should be observed to prevent danger of the apparatus. WARNING Power Supply Ensure the source voltage matches the voltage of the power supply before turning ON the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. External Connection The external wiring connected to the out- put hazardous live terminals requires installation by an instructed person, or the use of ready-made leads or cords. Do not Remove any Cover There are maybe some areas with high voltages inside, to reduce the risk of electric shock, do not remove any cover if the power supply is connected. The cover should be removed by the qual- ified personnel only. No user serviceable parts inside. Fuse To prevent a fire, make sure to use fuses with specified standard (current, voltage, type). Do not use a different fuse or short circuit the fuse holder. Before replacing the fuse, turn OFF the apparatus and disconnected the power source. Protective Grounding Make sure to connect the protective grounding to prevent any electric shock before turning ON the apparatus. Never cut off the internal or external pro- tective grounding wire or disconnect the wiring of protective grounding terminal. Operating Conditions This apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on this apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not use this apparatus near water. Install in accordance with the manufacturer's Hazardous live terminal . Disposing of this product should not be placed in municipal waste and should be separate collection. Remark: 1. The values with underlines should be scanned manually by adjusting UP/DOWN key. 2. The following channels can be used simultaneously without any interference. Group 1-1: 798.125 Group 2-1: 798.325 Group 2-2: 800.725 Group 2-5: 807.925 Group 3-4: 805.725 Group 5-1: 798.925 Group 5-8: 815.725 Group 7-1: 799.325 Group 8-6: 811.525 Group 12-2: 802.725 F8: 850.000-874.000(850-879)MHz F8: 850.000-874.000(850-879)MHz 1 2 3 4 5 6 7 8 9 10 11 12 Group1Group2Group3Group4Group5Group6Group7Group8Group9Group10Group11Group12 850.125 850.325 850.525 850.725 850.925 851.125 851.325 851.525 851.725 851.925 852.125 852.325 852.525 852.725 852.925 853.125 853.325 853.525 853.725 853.925 854.125 854.325 854.525 854.725 854.925 855.125 855.325 855.525 855.725 855.925 856.125 856.325 856.525 856.725 856.925 857.125 857.325 857.525 857.725 857.925 858.125 858.325 858.525 858.725 858.925 859.125 859.325 859.525 859.725 859.925 860.125 860.325 860.525 860.725 860.925 861.125 861.325 861.525 861.725 861.925 862.125 862.325 862.525 862.725 862.925 863.125 863.325 863.525 863.725 863.925 864.125 864.325 864.525 864.725 864.925 865.125 865.325 865.525 865.725 865.925 866.125 866.325 866.525 866.725 866.925 867.125 867.325 867.525 867.725 867.925 868.125 868.325 868.525 868.725 868.925 869.125 869.325 869.525 869.725 869.925 870.125 870.325 870.525 870.725 870.925 871.125 871.325 871.525 871.725 871.925 872.125 872.325 872.525 872.725 872.925 873.125 873.325 873.525 873.725 873.925 874.125 874.325 874.525 874.725 874.925 875.125 875.325 875.525 875.725 875.925 876.125 876.325 876.525 876.725 876.925 877.125 877.325 877.525 877.725 877.925 878.125 878.325 878.525 878.725 21 TABLE OF CONTENTS 1. ...1 2. ................................................5 3. .................................5 4. .....................................9 5. 6. INTRODUCTION FEATURES CONTROL ELEMENTS OPERATION TECHNICAL SPECIFICATIONS ANNEX ................................................................................... .............................................. .......................................... ....................................................... ............................................................15 ...................................................................................................17 19 F4: 638.000-662.000(638-664)MHz F4: 638.000-662.000(638-664)MHz 1 Group1Group2Group3Group4Group5 Group6 638.125 638.325 638.525 638.725 638.925 639.125 639.325 639.525 639.725 639.925 640.125 640.325 640.525 640.725 640.925 641.125 641.325 641.525 641.725 641.925 642.125 642.325 642.525 642.725 642.925 643.125 643.325 643.525 643…

Text truncated - open the document above for the full version.

UP-82DR UR-82DR

Produkte Products Prüfbericht - Nr.: Test Report No.: 16012339 001 Seite 2 von 20 Page 2 of 20 TEST SUMMARY 5.1 CONDUCTED EMISSION FOR FCC PART 15 PER SECTION 15.107(A) RESULT: Pass 5.2 RADIATED EMISSION FOR FCC PART 15 PER SECTION 15.109(A) RESULT: Pass 5.3 38 DB REJECTION SIGNAL FROM CELLULAR FREQUENCY BAND 15.121(B) RESULT: Pass Produkte Products Prüfbericht - Nr.: Test Report No.: 16012339 001 Seite 3 von 20 Page 3 of 20 Contents 1 GENERAL REMARKS........................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS......................................................................................... 4 2 TEST SITES.......................................................................................................................... 4 2.1 TEST FACILITIES................................................................................................................ 4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS........................................................... 5 2.3 TRACE ABILITY................................................................................................................... 5 2.4 CALIBRATION..................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY.......................................................................................... 6 2.6 LOCATION OF ORIGINAL DATA........................................................................................... 6 2.7 STATUS OF FACILITY USED FOR TESTING........................................................................... 6 3 GENERAL PRODUCT INFORMATION................................................................................... 7 3.1 PRODUCT FUNCTION AND INTENDED USE......................................................................... 7 3.2 RATINGS AND SYSTEM DETAILS........................................................................................ 7 3.3 INDEPENDENT OPERATION MODES................................................................................... 8 3.4 SUBMITTED DOCUMENTS................................................................................................... 8 4 TEST SET-UP AND OPERATION MODE............................................................................... 9 4.1 PRINCIPLE OF CONFIGURATION SELECTION..................................................................... 9 4.2 TEST OPERATION AND TEST SOFTWARE........................................................................... 9 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT....................................................... 9 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE.................................................... 9 4.5 TEST SET-UP...................................................................................................................... 10 5 TEST RESULTS E M I S S I O N ..................................................................................... 12 5.1 CONDUCTED EMISSION FOR FCC PART 15 PER SECTION 15.107(A) ............................. 12 5.2 RADIATED EMISSION FOR FCC PART 15 PER SECTION 15.109(A) ................................. 13 5.3 38 DB REJECTION SIGNAL FROM CELLULAR FREQUENCY BAND.................................... 17 6 PHOTOGRAPHS OF THE TEST SET-UP.............................................................................. 18 7 LIST OF TABLES................................................................................................................ 20 8 LIST OF PHOTOGRAPHS.................................................................................................... 20 Produkte Products Prüfbericht - Nr.: Test Report No.: 16012339 001 Seite 4 von 20 Page 4 of 20 1 General Remarks 1.1 Complementary Materials All attachments are integral parts of this test report. This applies especially to the following appendix: Appendix 1: Test result 2 Test Sites 2.1 Test Facilities TÜV Rheinland (Guangdong) Ltd. EMC Laboratory Guangzhou Auto Market, Yuan Gang Section of Guangshan Road Guangzhou 510650 P. R. China Produkte Products Prüfbericht - Nr.: Test Report No.: 16012339 001 Seite 5 von 20 Page 5 of 20 2.2 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment Kind of Equipment Type Manufacturer S/N Calibrated until Calibrated Interval EMI Test Receiver ESCI-3 Rohde & Schwarz 100216 26.Nov.2008 1 year Spectrum Analyzer FSP30 Rohde & Schwarz 100286 24.Aug.2008 1 year Trilog-Broadband Antenna VULB9168SCHWARZBECK MESS-ELEKTRONIK 210 08.May.2009 2 year Double-Ridged Waveguide Horn Antenna HF906 Rohde & Schwarz 100385 18.Jul.2009 2 year Double-Ridged Waveguide Horn Antenna HF906 Rohde & Schwarz 100407 08.May.2009 2 year Pre-amplifier AFS42- 00101800- 25-S-42 MITEQ 110159931.Jul.2009 2 year Band Reject Filter BRM50702Micro-Tronics 023 15.Feb.2010 2 year Standard Gain Horn Antenna 3160-09 EMCO 21642 N/A 2 year Standard Gain Horn Antenna 3160-09 EMCO 21645 N/A 2 year Pre-amplifier AFS33- 18002650- 30-8P-44 MITEQ 110828231.Jul.2009 2 year 3m Anechoic Chamber N/A Albatross Project GmbH N/A 16.Apr.2008 2 year EMI Test Receiver ESCS30 Rohde & Schwarz 100316 27.Mar.2009 1 year Two-Line V-Network ESH3-Z5 Rohde & Schwarz 100308 27.Mar.2009 1 year Pulse Limiter ESH3-Z2 Rohde & Schwarz 100701 01.Mar.2009 1 year 2.3 Trace ability All measurement equipment calibrations are traceable to NIST or where calibration is performed outside the United States, to equivalent nationally recognized standards organizations Produkte Products Prüfbericht - Nr.: Test Report No.: 16012339 001 Seite 6 von 20 Page 6 of 20 2.4 Calibration Equipment requiring calibration is calibrated periodically by the manufacturer or according to manufacturer’s specifications. Additionally all equipment is verified for proper performance on a regular basis using in house standards or comparisons. 2.5 Measurement Un…

Text truncated - open the document above for the full version.

Produkte Products Prüfbericht - Nr.: Test Report No.: 16012339 001 Seite 18 von 20 Page 18 of 20 6 Photographs of the Test Set-Up Photograph 1: Set up for Conducted Emission on AC Mains Photograph 2: Set-up for Radiation Measurement Below 1GHz Produkte Products Prüfbericht - Nr.: Test Report No.: 16012339 001 Seite 19 von 20 Page 19 of 20 Photograph 3: Set-up for Radiation Measurement Above 1GHz