HCOT30SNI1ASingle-Band Low Power Remote Unit for Repeater System

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com A pril 9 th , 2015 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Attestation Regarding Warning Labels FCC ID: HCOT30SNI1A This letter is an attestation that the warning label and class B messages required per 47 C.F.R. § 90.219 will be affixed to the unit, on the outside packaging, in print and on-line versions of the owner's manual and installation instructions, and in on-line point-of-sale marketing materials. A sample of this label is included in the exhibit named "t30SNI1NB - LabelSmpl-vX.pdf". Shawn Stapleton Founder and CTO

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com May 19 th , 2015 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Authorization letter FCC ID: HCOT30SNI1A This letter authorizes TIMCO Engineering, Inc. to submit the “Permit But Ask” (PBA) to FCC for the device with above stated FCC ID. Shawn Stapleton Founder and CTO

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com April 9 th , 2015 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Restricted Access of Equipment and Documentation Notice FCC ID: HCOT30SNI1A Pursuant to Sections 0.457 and 0.459 of the Rules, 47 C.F.R. § 0.457 and 0.459, Dali Wireless requests confidential treatment of certain information submitted with this document. This Restricted Access of Equipment and Documentation Notice is to inform Timco Engineering, Inc. that access to equipment and related documentation supplied by Dali Wireless Inc. is to be restricted to only authorized users in order to ensure the security of the equipment and confidentiality of related documentation at all times. Only designated professionals shall be allowed to maintain or service the equipment. Dali Wireless, Inc. is requesting the internal photos be permanently confidential. This non- consumer device is inaccessible to the general public, and shall be kept in a secured and locked environment. Further, Dali Wireless, Inc is requesting the Operational Description and User Manual (the Documents referenced below) be permanently confidential. The reason for this request is that the Documents are of a technical nature and are not provided to the consumer because the consumer cannot service the device. Our devices will be sold to a limited audience and the Dali wishes the Documents to be inaccessible to the general public at all times. Appropriate documentation will be made be available only to Dali Wireless, Inc. partners and integrators only. Designated professionals under the employ of these partners and integrators will be responsible for service and maintenance of our devices. Each partner and integrator will be under a non-disclosure agreement with Dali Wireless, Inc. A sample of this agreement is included below. In conclusion, Dali Wireless, Inc. requests the permanent confidentiality for the following items: Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com Permanently Confidential - Operational Description “t30SNI1NB-OpDes-vX.pdf” Permanently Confidential - User Manual “ t30SNI1NB-UserMan-vX.pdf” Permanently Confidential - Schematics “t30SNI1NB-Schem-vX.pdf” Permanently Confidential - Parts List “t30SNI1NB-PartsLst-vX.pdf” Permanently Confidential –Internal Photographs “t30SNI1NB-IntPho-vX.pdf” Permanently Confidential –Block Diagram “t30SNI1NB-BlkDia-vX.pdf” Permanently Confidential –Tuning Procedure “t30SNI1NB-TunPro-vX.pdf” Where in each of the above X may be 1 to 9 and refers to the document version. Shawn Stapleton Founder and CTO DALI WIRELESS, INC. MUTUAL NONDISCLOSURE AGREEMENT - 1 - MUTUAL NONDISCLOSURE AGREEMENT THIS MUTUAL NONDISCLOSURE AGREEMENT (this “Agreement”) is entered into and effective as of the date of the last signature below (the “Effective Date”), between Dali Wireless, Inc., a Delaware corporation, and its affiliates (“Dali Wireless”) and , a , and its affiliates. 1. Confidential Information. “Confidential Information” means all confidential and/or proprietary information disclosed or made available by one party as “Discloser” to the other as “Recipient”, including but not limited to, (a) business plans, financial reports, financial data, employee data, customer lists, forecasts, strategies, and all other business information; and (b) software or firmware code, semiconductor or printed circuit board layout diagrams, product designs and/or specifications, algorithms, computer programs, mask works, inventions, unpublished patent applications, manufacturing or other technical or scientific know-how, specifications, technical drawings, diagrams, schematics, technology, processes, and any other trade secrets, discoveries, ideas, concepts, know-how, techniques, materials, formulae, compositions, information, data, results, plans, surveys and/or reports of a technical nature or concerning research and development and/or engineering activity. Confidential Information may be that of Discloser or of third parties to whom Discloser has an obligation to treat the disclosed information as confidential. Confidential Information also includes copies, notes, abstracts and other tangible embodiments made by Recipient that are based on or contain any of such information, as well as the existence and progress of the Purpose (described in Section 4 below). 2. Identification of Confidential Information. Information will be considered to be Confidential Information and protected under this Agreement if it is identified as “confidential” or “proprietary” at the time of disclosure or if the information should reasonably be considered to be confidential or proprietary due to its nature or the context of its disclosure. 3. Purpose. Recipient covenants and agrees to use Discloser’s Confidential Information solely to evaluate possible business opportunities between the parties (the “Purpose”). 4. Protection of Confidential Information. Each party acknowledges that the other party claims that its Confidential Information is a valuable and unique asset and agrees to the following: (a) Recipient (i) will not disclose the Confidential Information to any third party except as provided in Section 4(a)(ii); (ii) will not disclose the Confidential Information to its employees or independent contractors unless the employees or independent contractors have a need to know the Confidential Information for the Purpose and have executed a written confidentiality agreement at least as restrictive as this Agreement; and (iii) will use the Confidential Information solely for the Purpose and will not use it for the benefit of any third party. Recipient will use the same degree of care to protect the Confidential Information from unauthorized use or disclosure as it would use to protect its own information of a similar nature, but in no event with less than reasonable care…

Text truncated - open the document above for the full version.

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com April 9 th , 2015 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Marketing and Professional Installation Required FCC ID: HCOT30SNI1A Marketing: The intended use is generally for industrial/commercial use and will not be sold to the general public. It will also not be sold through retail establishments or through mail order. It will be sold to OEM customers, qualified dealers and directly to commercial customers. Professional Installation: Since the equipment used in the above reference FCC ID has standard RF connectors, the system must be professionally installed. The installer shall be responsible for ensuring that the proper RF distribution network and antenna are employed so that the limits specified in Part 15.247 (b) are not exceeded. It is intended for industry/commercial use. All the necessary instructions keeping our qualified dealers, commercial customers and professional installers clear of the necessity of professional installation are given in the product user manual. Professional installers will ensure that the equipment is installed following local regulations and safety codes. Professional System Design: Further, Dali Wireless, Inc., its partners and integrators will produce appropriate designs for proper equipment placement and settings. Professional RF design and modelling tools are always used to ensure the system operates within the desired coverage area at the appropriate signal levels. Permission is obtained from spectrum owners and deployment is typically coordinated with those spectrum owners. The equipment is setup, and typically centrally monitored, to ensure that it operates on intended frequencies and power levels and that it covers licensed areas and does not interfere with adjacent spectrum owners. Shawn Stapleton Founder and CTO

t30 800 PS, Remote Unit External Photos t30 800 PS Front view t30 800 PS Back view t30 800 PS Side view t30 800 PS Connector Panel View t30 800 PS Back Panel w/ Labels

0.43 11 0.31 8 0.31 8 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 DO NOT SCALE DRAWING DIMENSIONS & TOLERANCING ARE TO BE INTERPRETED PER ASME Y14.5M-2009 AND APPLY TO FINISHED PART SURFACE FINISH = = X.XX = X. = PROJECTION - - - FINISH: DATE DATE DATE DATE SUPPLY CHAIN CHECKED MFG DRAWN BY DWG No. B - REV SIZE - SHEET: 1 OF 1SCALE: 1:25 X.X = - 0.50 0.25 0.10 0.5 MATL: 1.6 TITLE - D C B A DEBURR & BREAK SHARP UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS - TOLERANCES: THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO DALI WIRELESS INC AND IS TO BE USED SOLELY FOR THE PURPOSE FOR WHICH IT IS SUPPLIED. IT SHALL NOT BE DISCLOSED IN WHOLE OR IN PART TO ANY OTHER PARTY WITHOUT DALI PERMISSION. DATE CORNERS μm Q.A. - 000-000000-000 Dali Wireless, Inc. - t30 Labels location

  5 $ULDO5HJXODUPP $ULDO5HJXODUPP 5$/ %ODFN 5$/5*% $ULDO5HJXODUPP $ULDO5HJXODUPP 0DWHULDO0/DEHO0DWHULDO:KLWH3RO\VWHU%ODFNWH[WIRQW 5$/5*% 5(9,6,216 5(9 '(6&5,37,21 $339 '$7( ' & % $                 ' & % $                 '21276&$/('5$:,1* ',0(16,216 72/(5$1&,1* $5(72%(,17(535(7('3(5 $60(<0$1' $33/<72),1,6+('3$57 685)$&(),1,6+     ;;;   ;   352-(&7,21  .HOYLQ7DP ),1,6+ '$7('$7('$7('$7( 6833/<&+$,1&+(&.('0)* '5$:1%< ':*1R % 5HY$ 5(9 6,=( 6+((72) 6&$/( ;;   8//DVHU/DEHO    6HH1RWH 0$7/  7,7/(  ' & % $  '(%855 %5($.6+$53 81/(6627+(5:,6( 63(&,),(' ',0(16,216$5(,1 0,//,0(7(5672/(5$1&(6 7+(,1)250$7,21&217$,1(' +(5(,1,635235,(7$5<72 '$/,:,5(/(66,1&$1',672%( 86('62/(/<)257+(385326( )25:+,&+,7,66833/,(',7 6+$//127%(',6&/26(',1 :+2/(25,13$5772 $1<27+(53$57<:,7+287 '$/,3(50,66,21 '$7( &251(56 ǍP 4$   'DOL:LUHOHVV,QF   57<3 )RQW&DOLEUL5HJXODU+HLJKWPP%ODFN )RQW&DOLEUL5HJXODU+HLJKWPP%ODFN )RQW&DOLEUL5HJXODU+HLJKWPP%ODFN 0DWHULDO)DVVRQŠ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ǍP 4$   'DOL:LUHOHVV,QF  50.8 38.0 R3.2 FONT: Swiss721 BlkCnBT,italic black, 3 mm height FONT: Swiss721 BlkCnBT,regular black, 3 mm height FONT: Arial, 2 mm height FONT: Arial, 1mm height FONT: Arial, 1.2 mm height Note: For more information regarding text placement, a .dwg file is available upon request. Material: Fasson® 2 Mil Matte Chrome Polyester TC/S730 Film(0.05mm thick) with S730 adhesive. Black text font. See referenced documents for printer/ink used during process REVISIONS REV.DESCRIPTIONAPPVDATE D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 DO NOT SCALE DRAWING DIMENSIONS & TOLERANCING ARE TO BE INTERPRETED PER ASME Y14.5M-2009 AND APPLY TO FINISHED PART SURFACE FINISH = = X.XX = X. = PROJECTION Marian Stanciu FINISH: DATE DATE DATE DATE SUPPLY CHAIN CHECKED MFG DRAWN BY DWG No. B Rev A1 REV SIZE SHEET: 1 OF 1SCALE: 2:1 X.X = t30 PS_ 800 PS 0.50 0.25 0.10 0.5 MATL: 1.6 TITLE - D C B A DEBURR & BREAK SHARP UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS - TOLERANCES: THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO DALI WIRELESS INC AND IS TO BE USED SOLELY FOR THE PURPOSE FOR WHICH IT IS SUPPLIED. IT SHALL NOT BE DISCLOSED IN WHOLE OR IN PART TO ANY OTHER PARTY WITHOUT DALI PERMISSION. DATE CORNERS μm Q.A. 2012-12-20 440-00062 Dali Wireless, Inc. -

Exposure Evaluation t-Series t30™ps Single Band Low Remote Unit FCCID: HCOT30SNI1A Date: Jun 11, 2015 Model No.: t30-SNI-1NB Labs: 8618 Commerce Court, Burnaby, BC, V5A 4N6, Canada Daryl Meerkerk Manager Guihua Sophie Piao Test Engineer Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com CONFIDENTAL AND PROPRIETARY This document contains information proprietary to Dali Wireless. Any disclosure, use or duplication of this document or of any of the information contained herein for other than the specific purpose for which it was disclosed is expressly prohibited, except as Dali Wireless may otherwise agree to in writing. © Copyright 2014 Dali Wireless. All Rights Reserved Dali Wireless t37-ps Exposure Evaluation Page 2 of 2 RF Exposure Evaluation According to FCC Part 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. More information on evaluating compliance with these limits can be found in the FCC's OST/OET Bulletin Number 65, “Evaluating Compliance with FCC-Specified Guidelines for Human Exposure to Radiofrequency Radiation”. In the Frequency Range of 300 to 1500 MHz, the maximum power density limit for the general population/uncontrolled exposures is F/1500 for an average time of 30 minutes. The antenna connected to the product is specific to the deployment. The worst case scenario occurs when using a very high gain antenna as shown in the following example: The highest expected output power may be 1 dB above the rated 30 dBm. For an output level of 31 dBm with an antenna gain of 8.138 dB, the EIRP is 39 dBm. The maximum power density safe exposure level for general population/uncontrolled exposure of 30 minutes for the frequency of 862 MHz is 0.575 mW/cm 2 . Conducted Output Power (dBm) Max Antenna Gain (dBi) Max EIRP (mW) Power Density Limit Allowed (mW/cm²) Safe Distance (cm) 31 8.138 8200 0.575 34 RF Exposure Evaluation Distance Calculation 푑푑= � � 퐸퐸퐸퐸퐸퐸퐸퐸 4휋휋휋휋 � Where: d = Distance to the center of radiation of the antenna (cm) for the allowable Power Density S = Allowable Power Density Limit (mW/cm 2 ) EIRP = Equivalent isotropically radiated power (mW) = 10 [TX Power (dBm) + Ant Gain (dBi)/10] As shown above, the minimum distance where the MPE limit is reached is 34 cm from the unit with a 8.138 dBi antenna and no distribution loss. If the antenna will be positioned closer to end users than 34 cm, then the installer must calculate the safe distance for a given installation using the formulas provided.

TEST REPORT For Dali Wireless (Canada) Inc. 8618 Commerce Ct. Burnaby, British Columbia V5A 4N6, Canada Date: April 09, 2015 Report No.: 12 675-1E Revision No.: 0 Project No.: 12675 Equipment: Radio Remote Model No.: t30-SNI-1NB ONE STOP GLOBAL CERTIFICATION SOLUTIONS 3133-20800 Westminster Hwy, Richmond, BC V6V 2W3, Canada Phone: 604-247-0444 Fax: 604-247-0442 www.labtestcert.com Prepared by: LabTest Certification Inc. Client: Dali Wireless Inc. Date Issued: April 09, 2015 Report No.: 12675-1E Project No: 12675 Revision No.: 0 Page 2 of 26 This document shall not be reproduced or utilized in any form or by any means, except in full, without the written approval of LabTest Certification Inc. DCN: 1034, Rev 4 TABLE OF CONTENTS TEST REPORT ................................................................................................................................................ 3 General product information: ............................................................................................................................ 5 List of ancillary and/or support equipment provided by the applicant .............................................................. 5 Description of Interface Cables for Testing ...................................................................................................... 5 Software and Firmware .................................................................................................................................... 5 Worst-case configuration and mode of operation during testing ...................................................................... 5 Modifications Required for Compliance............................................................................................................ 6 Test Equipment Verified for function ................................................................................................................ 6 Measurement Uncertainty ................................................................................................................................ 6 Markings ........................................................................................................................................................... 7 Test Summary .................................................................................................................................................. 7 Radiated Spurious Emissions .......................................................................................................................... 8 Test Limits ..................................................................................................................................................... 8 Test Setup ..................................................................................................................................................... 8 Test Results: ................................................................................................................................................. 9 APPENDIX A: Test Equipment Used ............................................................................................................. 22 APPENDIX B: EUT photos ............................................................................................................................. 23 APPENDIX C: Test setup photos ................................................................................................................... 24 Prepared by: LabTest Certification Inc. Client: Dali Wireless Inc. Date Issued: April 09, 2015 Report No.: 12675-1E Project No: 12675 Revision No.: 0 Page 3 of 26 This document shall not be reproduced or utilized in any form or by any means, except in full, without the written approval of LabTest Certification Inc. DCN: 1034, Rev 4 TEST REPORT FCC 90 and RSS-131 Report reference No. .................... : 12675-1E Report Revision History:  Rev. 0: April 09, 2015 Tested by (printed name and signature) ........ : Jeremy Lee Approved by (printed name and signature) ........ : Kavinder Dhillon, Eng.L Date of issue ................................. : April 09, 2015 Note: By signing this report, both the Testing Technician and the Reviewer hereby declare to abide by the applicable LabTest policies: 1.) Statement of Independence # 3014 (LabTest Employees), 2.) Independence, Impartiality, and Integrity #1039, clause 11 (Engineering Service Subcontractors), or 3. ) Independence, Impartiality, and Integrity #1019, clause 3.5 (Testing Subcontractors). Testing Laboratory Name ........... : LabTest Certification Inc. Address ......................................... : 3133 – 20800 Westminster Hwy, Richmond, B.C. V6V 2W3 FCC Site Registration No. ............ : 373387 IC Site Registration No. ............... : 5970A-2 Test Location Name ................... : LabTest Certification Inc. Address .......................................... : 3133 – 20800 Westminster Hwy, Richmond, B.C. V6V 2W3 Applicant's Name ........................ : Dali Wireless (Canada) Inc. Address ......................................... : 8618 Commerce Ct. , Burnaby, B.C., V5A 4N6 Canada Manufacturer's Name .................. : Same as Applicant Address ......................................... : Same as Applicant Test specification Standards ...................................... :  CFR 47 Part 90  RSS-131 Testing Date of receipt of test item ............ : April 06, 2015 Date(s) of performance of test ...... : April 06 to 08, 2015 Test item description Trademark ..................................... : Prepared by: LabTest Certification Inc. Client: Dali Wireless Inc. Date Issued: April 09, 2015 Report No.: 12675-1E Project No: 12675 Revision No.: 0 Page 4 of 26 This document shall not be reproduced or utilized in any form or by any means, except in full, without the written approval of LabTest Certification Inc. DCN: 1034, Rev 4 Model and/or type reference ......... : t30-SNI-1NB FCC & IC ID....…

Text truncated - open the document above for the full version.

________________________________________________ 8618 Commerce Court Burnaby, BC V5A 4N6, Canada PH: 1 604.420.7760 FAX: 1 604.420.7730 EMAIL: [email protected] _________________________________________________ FCC PARTS 2, 90 TEST REPORT Applicant Dali Wireless, Inc. Address 8618 Commerce Court, Burnaby, British Columbia, V5A 4N6, Canada FCC ID HCOT30SNI1A Model Number t30-SNI-1NB Product Description Public Safety 800 Remote Unit, Single-Band Date Sample Received Apr 6 th , 2015 Date Sample Tested Apr 6 th to Apr 10 th , 2015 Tested by Guihua Sophie Piao Approved by Harry Deo Report No. T30-SNI-1NB Test Results Compliant This document contains information proprietary to Dali Wireless, Inc., to its subsidiaries, or to a third party to which Dali Wireless, Inc. may have a legal obligation to protect such information from unauthorized disclosure, use or duplication. Any disclosure, use or duplication of this document or of any of the information contained herein for other than the specific purpose for which it was disclosed is expressly prohibited, except as Dali Wireless, Inc. may otherwise agree to in writing. Revision History Revision Date Reason For Change Author(s) 0.1 April 13 th , 2015 Initial Data S. Piao 1.0 May 4 th , 2015 First version S.Piao p2 Table of Contents Revision Description 2 Table of Contents 3 Acronyms and Abbreviations 4 1.0 OVERVIEW .................................................................................................................................................. 5 1.1 Scope ..................................................................................................................................................... 5 1.2 Attestation Statement ............................................................................................................................. 5 1.3 Report Summary .................................................................................................................................... 5 1.4 Test Environment ................................................................................................................................... 6 1.5 Test Setup .............................................................................................................................................. 6 1.6 Device Under Test Information ............................................................................................................. 7 1.7 Measurement Uncertainty ..................................................................................................................... 8 1.8 Equipment List ....................................................................................................................................... 8 1.9 Test Procedure ...................................................................................................................................... 8 1.10 Operational Description ................................................................................................................. 10 1.11 RF Signal Configuration ................................................................................................................ 10 2.0 OUTPUT POWER – PURSUANT 47 CFR PART 2.1046(A) AND 90.219 (D) (3) ............................... 12 2.1 Methodology ........................................................................................................................................ 12 2.2 Test Results .......................................................................................................................................... 12 3.0 OCCUPIED BANDWIDTH PURSUANT 47 CFR PART 2 AND PART 90I ....................................... 15 3.1 Methodology ........................................................................................................................................ 15 3.2 Test Results .......................................................................................................................................... 15 4.0 UNWANTED EMISSIONS - CONDUCTED SPURIOUS PURSUANT 47 CFR 90.210 (G)(2) AND 90.210 (H)(5) ......................................................................................................................................................... 18 4.1 Methodology ........................................................................................................................................ 18 4.2 Test Results .......................................................................................................................................... 18 5.0 SPECTRUM EMISSION MASK PURSUANT 47 CFR PART 90.210 .................................................. 20 5.1 Methodology ........................................................................................................................................ 20 5.2 Test Results .......................................................................................................................................... 20 6.0 FREQUENCY STABILITY PURSUANT 47 CFR PART 90I ............................................................... 22 6.1 Methodology ........................................................................................................................................ 22 6.2 Test Results .......................................................................................................................................... 22 7.0 INTERMODULATION PURSUANT 47 CFR PART 90.219 (D)(6)(I) .................................................. 24 7.1 Methodology ........................................................................................................................................ 24 7.2 Test Results .......................................................................................................................................... 24 8.0 NOISE FIGURE PURSUANT 47 CFR PART 90.219 (E)(2) ...............................................…

Text truncated - open the document above for the full version.

Test Setup t-Series t30ps Single-Band Low Power Remote Unit Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com © Copyright 2015 Dali Wireless. All Rights Reserved FCC ID: HCOT30SN1A Client: Dali Wireless (Canada) Inc. Project No.: 12675 Date: April 09, 2015 Page 1 of 1 HCOT30SNI1A Test Setup Photos Picture 1: Radiated Emission test setup in Semi Anechoic Chamber Picture 2: Radiated Emission test setup in Semi Anechoic Chamber Figure 1 Conducted Test Setup – EUT Figure 2 Conducted Test Setup – EUT in Temperature Chamber