HCOT37DVUS4ADual-Band Medium Power Remote Unit for Repeater System

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com August 5 th , 2014 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Attestation Regarding Warning Labels FCC ID: HCOT37DVUS4A This letter is an attestation that the warning label and class B messages required per 47 C.F.R. § 90.219 will be affixed to the unit, on the outside packaging, in print and on-line versions of the owner's manual and installation instructions, and in on-line point-of-sale marketing materials. A sample of this label is included in the exhibit named "t37DVUS4N-LabelSmpl-vX.pdf". Shawn Stapleton Founder and CTO

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com August 5 th , 2014 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Authorization letter FCC ID: HCOT37DVUS4A This letter authorizes Mr. Shawn Stapleton to sign application form 731 to Timco Engineering Inc. and in respect to all information details mentioned in this form to present confidential data on products manufactured by Dali Wireless Inc. Daryl Meerkerk Principal Systems Engineer

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com August 5 th , 2014 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Restricted Access of Equipment and Documentation Notice FCC ID: HCOT37DVUS4A Pursuant to Sections 0.457 and 0.459 of the Rules, 47 C.F.R. § 0.457 and 0.459, Dali Wireless requests confidential treatment of certain information submitted with this document. This Restricted Access of Equipment and Documentation Notice is to inform Timco Engineering, Inc. that access to equipment and related documentation supplied by Dali Wireless Inc. is to be restricted to only authorized users in order to ensure the security of the equipment and confidentiality of related documentation at all times. Only designated professionals shall be allowed to maintain or service the equipment. Dali Wireless, Inc. is requesting the internal photos be permanently confidential. This non- consumer device is inaccessible to the general public, and shall be kept in a secured and locked environment. Further, Dali Wireless, Inc is requesting the Operational Description and User Manual (the Documents referenced below) be permanently confidential. The reason for this request is that the Documents are of a technical nature and are not provided to the consumer because the consumer cannot service the device. Our devices will be sold to a limited audience and the Dali wishes the Documents to be inaccessible to the general public at all times. Appropriate documentation will be made be available only to Dali Wireless, Inc. partners and integrators only. Designated professionals under the employ of these partners and integrators will be responsible for service and maintenance of our devices. Each partner and integrator will be under a non-disclosure agreement with Dali Wireless, Inc. A sample of this agreement is included below. In conclusion, Dali Wireless, Inc. requests the permanent confidentiality for the following items: Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com Permanently Confidential - Operational Description “t37DVUS4N-OpDes-vX.pdf” Permanently Confidential - User Manual “t37DVUS4N-UserMan-vX.pdf” Permanently Confidential - Schematics “t37DVUS4N-Schem-vX.pdf” Permanently Confidential - Parts List “t37DVUS4N-PartsLst-vX.pdf” Permanently Confidential –Internal Photographs “t37DVUS4N-IntPho-vX.pdf” Permanently Confidential –Block Diagram “t37DVUS4N-BlkDia-vX.pdf” Permanently Confidential –Tuning Procedure “t37DVUS4N-TunPro-vX.pdf” Where in each of the above X may be 1 to 9 and refers to the document version. Shawn Stapleton Founder and CTO DALI WIRELESS, INC. MUTUAL NONDISCLOSURE AGREEMENT - 1 - MUTUAL NONDISCLOSURE AGREEMENT THIS MUTUAL NONDISCLOSURE AGREEMENT (this “Agreement”) is entered into and effective as of the date of the last signature below (the “Effective Date”), between Dali Wireless, Inc., a Delaware corporation, and its affiliates (“Dali Wireless”) and , a , and its affiliates. 1. Confidential Information. “Confidential Information” means all confidential and/or proprietary information disclosed or made available by one party as “Discloser” to the other as “Recipient”, including but not limited to, (a) business plans, financial reports, financial data, employee data, customer lists, forecasts, strategies, and all other business information; and (b) software or firmware code, semiconductor or printed circuit board layout diagrams, product designs and/or specifications, algorithms, computer programs, mask works, inventions, unpublished patent applications, manufacturing or other technical or scientific know-how, specifications, technical drawings, diagrams, schematics, technology, processes, and any other trade secrets, discoveries, ideas, concepts, know-how, techniques, materials, formulae, compositions, information, data, results, plans, surveys and/or reports of a technical nature or concerning research and development and/or engineering activity. Confidential Information may be that of Discloser or of third parties to whom Discloser has an obligation to treat the disclosed information as confidential. Confidential Information also includes copies, notes, abstracts and other tangible embodiments made by Recipient that are based on or contain any of such information, as well as the existence and progress of the Purpose (described in Section 4 below). 2. Identification of Confidential Information. Information will be considered to be Confidential Information and protected under this Agreement if it is identified as “confidential” or “proprietary” at the time of disclosure or if the information should reasonably be considered to be confidential or proprietary due to its nature or the context of its disclosure. 3. Purpose. Recipient covenants and agrees to use Discloser’s Confidential Information solely to evaluate possible business opportunities between the parties (the “Purpose”). 4. Protection of Confidential Information. Each party acknowledges that the other party claims that its Confidential Information is a valuable and unique asset and agrees to the following: (a) Recipient (i) will not disclose the Confidential Information to any third party except as provided in Section 4(a)(ii); (ii) will not disclose the Confidential Information to its employees or independent contractors unless the employees or independent contractors have a need to know the Confidential Information for the Purpose and have executed a written confidentiality agreement at least as restrictive as this Agreement; and (iii) will use the Confidential Information solely for the Purpose and will not use it for the benefit of any third party. Recipient will use the same degree of care to protect the Confidential Information from unauthorized use or disclosure as it would use to protect its own information of a similar nature, but in no event with less than reasonable car…

Text truncated - open the document above for the full version.

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com August 5 th , 2014 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Extended Frequency Attestation FCC ID: HCOT37DVUS4A This product will only be operated within the following frequency ranges under FCC rule part 90: 1. 150.8-156.2475 MHz 2. 157.1875-161.575 MHz 3. 161.775-161.9625 MHz 4. 162.0375-173.4 MHz 5. 450-454 MHz 6. 456-462.5375 MHz 7. 462.7375-467.5375 MHz 8. 467.7375-512 MHz The devices to which this product is connected, for example base station equipment, will be programmed to operate only within a subset of these frequency ranges thus disabling operation at any other frequencies. We acknowledge that FCC rules are violated if the device is operated on frequencies others than listed above. Shawn Stapleton Founder and CTO

Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com August 5 th , 2014 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Reference: Marketing and Professional Installation Required FCC ID: HCOT37DVUS4A Marketing: The intended use is generally for industrial/commercial use and will not be sold to the general public. It will also not be sold through retail establishments or through mail order. It will be sold to OEM customers, qualified dealers and directly to commercial customers. Professional Installation: Since the equipment used in the above reference FCC ID has standard RF connectors, the system must be professionally installed. The installer shall be responsible for ensuring that the proper antenna is employed so that the limits specified in Part 15.247 (b) are not exceeded. It is intended for industry/commercial use. All the necessary instructions keeping our qualified dealers, commercial customers and professional installers clear of the necessity of professional installation are given in the product user manual. Professional installers will ensure that the equipment is installed following local regulations and safety codes. Professional System Design: Further, Dali Wireless, Inc., its partners and integrators will produce appropriate designs for proper equipment placement and settings. Professional RF design and modelling tools are always used to ensure the system operates within the desired coverage area at the appropriate signal levels. Permission is obtained from spectrum owners and deployment is typically coordinated with those spectrum owners. The equipment is setup, and typically centrally monitored, to ensure that it operates on intended frequencies and power levels and that it covers licensed areas and does not interfere with adjacent spectrum owners. Shawn Stapleton Founder and CTO

015-3274-14 t37 150-450 PS, Remote Unit External Photos t37 150-450 PS Front view t37 150-450 PS Back view t37 150-450 PS Side view t37 150-450 PS Connector Panel View t37 150-450 PS Back Panel w/ Labels

0.31 8 0.31 8 0.43 11 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 DO NOT SCALE DRAWING DIMENSIONS & TOLERANCING ARE TO BE INTERPRETED PER ASME Y14.5M-2009 AND APPLY TO FINISHED PART SURFACE FINISH = = X.XX = X. = PROJECTION - - - FINISH: DATE DATE DATE DATE SUPPLY CHAIN CHECKED MFG DRAWN BY DWG No. B - REV SIZE - SHEET: 1 OF 1SCALE: 1:25 X.X = - 0.50 0.25 0.10 0.5 MATL: 1.6 TITLE - D C B A DEBURR & BREAK SHARP UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS - TOLERANCES: THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO DALI WIRELESS INC AND IS TO BE USED SOLELY FOR THE PURPOSE FOR WHICH IT IS SUPPLIED. IT SHALL NOT BE DISCLOSED IN WHOLE OR IN PART TO ANY OTHER PARTY WITHOUT DALI PERMISSION. DATE CORNERS μm Q.A. - 000-000000-000 Dali Wireless, Inc. - t37 Labels location

38.0 50.8 R3.2 Arial, Regular, 1.50mm Arial, Regular, 1.50mm RAL1026 Black (RAL 9005/RGB 0,0,0) Arial, Regular, 1.50mm Arial, Regular, 2.00mm Material: 3M Label Material 7980, White Polyster Black text font (RAL 9005/RGB 0,0,0) REVISIONS REV.DESCRIPTIONAPPVDATE D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 DO NOT SCALE DRAWING DIMENSIONS & TOLERANCING ARE TO BE INTERPRETED PER ASME Y14.5M-2009 AND APPLY TO FINISHED PART SURFACE FINISH = = X.XX = X. = PROJECTION Kelvin Tam FINISH: DATE DATE DATE DATE SUPPLY CHAIN CHECKED MFG DRAWN BY DWG No. B Rev A1 REV SIZE SHEET: 1 OF 1SCALE: 4:1 X.X = UL Laser Label 0.50 0.25 0.10 0.5 See Note MATL: 1.6 TITLE - D C B A DEBURR & BREAK SHARP UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS - TOLERANCES: THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO DALI WIRELESS INC AND IS TO BE USED SOLELY FOR THE PURPOSE FOR WHICH IT IS SUPPLIED. IT SHALL NOT BE DISCLOSED IN WHOLE OR IN PART TO ANY OTHER PARTY WITHOUT DALI PERMISSION. DATE CORNERS μm Q.A. 2012-12-06 440-00019 Dali Wireless, Inc. 50.8 38.0 R3.2 FONT: Swiss721 BlkCnBT,italic black, 3 mm height FONT: Swiss721 BlkCnBT,regular black, 3 mm height FONT: Arial, 2 mm height FONT: Arial, 1mm height FONT: Arial, 1.2 mm height Note: For more information regarding text placement, a .dwg file is available upon request. Material: Fasson® 2 Mil Matte Chrome Polyester TC/S730 Film(0.05mm thick) with S730 adhesive. Black text font. See referenced documents for printer/ink used during process REVISIONS REV.DESCRIPTIONAPPVDATE D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 DO NOT SCALE DRAWING DIMENSIONS & TOLERANCING ARE TO BE INTERPRETED PER ASME Y14.5M-2009 AND APPLY TO FINISHED PART SURFACE FINISH = = X.XX = X. = PROJECTION Marian Stanciu FINISH: DATE DATE DATE DATE SUPPLY CHAIN CHECKED MFG DRAWN BY DWG No. B Rev A1 REV SIZE SHEET: 1 OF 1SCALE: 2:1 X.X = t37 PS_ t37-DVU-S4N_Label 0.50 0.25 0.10 0.5 MATL: 1.6 TITLE - D C B A DEBURR & BREAK SHARP UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS - TOLERANCES: THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO DALI WIRELESS INC AND IS TO BE USED SOLELY FOR THE PURPOSE FOR WHICH IT IS SUPPLIED. IT SHALL NOT BE DISCLOSED IN WHOLE OR IN PART TO ANY OTHER PARTY WITHOUT DALI PERMISSION. DATE CORNERS μm Q.A. 2012-12-20 440-00038 Dali Wireless, Inc. - 38.0 50.8 R3.2 TYP Font Calibri, Regular Height 1.00mm Black Font Calibri, Regular Height 1.5mm Black Font Calibri, Regular Height 1.00mm Black Material: Fasson® 2 Mil Matte Chrome Polyester TC/S730 Film(0.05mm thick) with S730 adhesive. Black text font. See referenced documents for printer/ink used during process Note: For more information regarding text placement, a .dwg file is available upon request. REVISIONS REV.DESCRIPTIONAPPVDATE D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 D C B A 8 7 6 5 4 3 2 1 7 4 2 6 3 1 5 8 DO NOT SCALE DRAWING DIMENSIONS & TOLERANCING ARE TO BE INTERPRETED PER ASME Y14.5M-2009 AND APPLY TO FINISHED PART SURFACE FINISH = = X.XX = X. = PROJECTION Marian Stanciu FINISH: DATE DATE DATE DATE SUPPLY CHAIN CHECKED MFG DRAWN BY DWG No. B - REV SIZE SHEET: 1 OF 1SCALE: 2:1 X.X = Warning label, 90.219 Class B Device 0.50 0.25 0.10 0.5 MATL: 1.6 TITLE - D C B A DEBURR & BREAK SHARP UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS - TOLERANCES: THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO DALI WIRELESS INC AND IS TO BE USED SOLELY FOR THE PURPOSE FOR WHICH IT IS SUPPLIED. IT SHALL NOT BE DISCLOSED IN WHOLE OR IN PART TO ANY OTHER PARTY WITHOUT DALI PERMISSION. DATE CORNERS μm Q.A. 2013-04-23 440-00042 Dali Wireless, Inc. -

Exposure Evaluation t-Series t37™ps Dual Band Medium Remote Unit FCCID: HCOT37DVUS4A Date: July 29, 2014 Model No.: t37-DVU-S4N Labs: 8618 Commerce Court, Burnaby, BC, V5A 4N6, Canada Daryl Meerkerk Manager Guihua Sophie Piao Test Engineer Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com CONFIDENTAL AND PROPRIETARY This document contains information proprietary to Dali Wireless. Any disclosure, use or duplication of this document or of any of the information contained herein for other than the specific purpose for which it was disclosed is expressly prohibited, except as Dali Wireless may otherwise agree to in writing. © Copyright 2014 Dali Wireless. All Rights Reserved Dali Wireless t37-ps Exposure Evaluation Page 2 of 2 RF Exposure Evaluation According to FCC Part 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. More information on evaluating compliance with these limits can be found in the FCC's OST/OET Bulletin Number 65, “Evaluating Compliance with FCC-Specified Guidelines for Human Exposure to Radiofrequency Radiation”. In the Frequency Range of 300 to 1500 MHz, the maximum power density limit for the general population/uncontrolled exposures is F/300 for an average time of 6 seconds. The antenna connected to the product is specific to the deployment. The worst case scenario occurs when using a very high gain antenna as shown in the following example: The highest expected output power may be 1 dB above the rated 37 dBm. For an output level of 38 dBm with an antenna gain of 21 dB, the EIRP is 59 dBm. The maximum power density safe exposure level for general population/uncontrolled exposure of 6 seconds for the frequency of 512 MHz is 0.34 mW/cm 2 . Conducted Output Power (dBm) Max Antenna Gain (dBi) Max EIRP (mW) Power Density Limit Allowed (mW/cm²) Safe Distance (cm) 38 21 794000 0.34 431 RF Exposure Evaluation Distance Calculation Where: d = Distance to the center of radiation of the antenna (cm) for the allowable Power Density S = Allowable Power Density Limit (mW/cm 2 ) EIRP = Equivalent isotropically radiated power (mW) = 10 [TX Power (dBm) + Ant Gain (dBi)/10] As shown above, the minimum distance where the MPE limit is reached is 431 cm from the unit with a 21 dBi antenna and no distribution loss. If the antenna will be positioned closer to end users than 431 cm, then the installer must calculate the safe distance for a given installation using the formulas provided.

19473 Fraser Way Pitt Meadows, BC Canada V3Y 2V4 ph. 604-527-8378 |fx. 604 527 8388 Electromagnetic Compatibility TEST REPORT Radiated Spurious Emissions Per FCC Part 2.1053 & Part 90.219(e)(3) Report Reference No. ...................: E10454-1401A Rev3.0 Date of issue ...................................: August 12, 2014 Total number of pages...............: 16 Testing Laboratory.......................: Quality Auditing Institute Address............................................ : 16 – 211 Schoolhouse Street, Coquitlam, BC, V3K 4X9, Canada Accreditations (ISO 17025): Standard Council of Canada: Accredited Laboratory No. 743 International Accreditation Service Inc: Accredited Laboratory: No. TL-239 This report has been completed in accordance with the requirements of ISO/IEC 17025. Test results contained in this report are within QAI Laboratories ISO/IEC 17025 accreditation. QAI Laboratories authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for the use by the company’s employees only. Applicant’s name ........................: Dali Wireless (Canada), Inc. Address..................................: 8618 Commerce Court Burnaby BC Canada V5A 4N6 Contact...................................: Daryl Meerkerk, [email protected] Phone.....................................: (604)420-7760 Fax: (604) 420-7730 Test Standard...........................: FCC Part 2.1053 & Part 90.219(e)(3) Test item description................: t37 (Public Safety 150/450 MHz) Model..................................: t37-DVU-S4N Trade Mark............................: Manufacturer ................................: Dali Wireless (Canada), Inc. Registrations...........................: FCC ID: HCOT37DVUS4A Client: Dali Wireless (Canada) Inc. Job No.: E10454-1401A Date: Aug 12, 2014 Page 2 of 16 t37 (Public Safety 150/450MHz) Client: Dali Wireless (Canada) Inc. Job No.: E10454-1401A Date: Aug 12, 2014 Page 3 of 16 Revision History Date Report Number Rev # Details Authors Initials August 1, 2014 E10454-1402B 0.0 Draft Test Report PS August 3, 2014 E10454-1402B 1.0 Final Report Issued AJ August 5, 2014 E10454-1402B 2.0 Final Report Issued-Corrected FCC ID AJ August 12, 2014 E10454-1401A 3.0 Revised Report number, 150MHz frequency bands and measurement tables DJ Note: All previous versions of this report have been superseded by the latest dated revision as listed in the above table. Please dispose of all previous electronic and paper printed revisions accordingly. Client: Dali Wireless (Canada) Inc. Job No.: E10454-1401A Date: Aug 12, 2014 Page 4 of 16 Index Statement of Compliance ............................................................................................................................. 5 Testing Location and Procedures ................................................................................................................. 6 Product Description ...................................................................................................................................... 8 Requirements for the US Market (FCC) ..................................................................................................... 10 Out Of Band Spurious Emissions Radiated from Cabinet and Circuits ........................... 10 Appendix A EUT Reference Plots ........................................................................................................ 14 Appendix B EUT photos during the testing .......................................................................................... 16 Client: Dali Wireless (Canada) Inc. Job No.: E10454-1401A Date: August 12, 2014 Page 5 of 16 Statement of Compliance The following tests demonstrate the testimony to “FCC” Mark Electromagnetic compatibility testing for “t37 (Public Safety 150M/450M)” manufactured by Dali Wireless (Canada), Inc. EMISSIONS United States: Intentional Transmitter (Radiated Spurious Only) FCC CFR 47, Part 2.1053 FCC CFR 47, Part 90.219(e)(3) Tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with the above list of standards. Additional standards may apply to this product. The manufacturer listed in this report is responsible for the tested product configuration, continued product compliance with these standards listed, additional testing as required by other standards not listed and for the appropriate auditing of subsequent products as required. This is to certify that the following report is true and correct to the best of our knowledge. Client: Dali Wireless (Canada) Inc. Job No.: E10454-1401A Date: August 12, 2014 Page 6 of 16 Testing Location and Procedures Testing Laboratory: Quality Auditing Institute Testing location/ address ............: 16 – 211 Schoolhouse Street, Coquitlam, BC, 3K 4X9, Canada Associated Laboratory: Quality Auditing Institute (Remote location) Testing location/ address ............: 19473 Fraser Way, Pitt Meadows, BC, V3Y 2V4, Canada FCC Test Site Registration Number (OATS 10m and SAC-3m): 226383 Industry Canada Site Registration Number (SAC-3m)............: 9543B-1 Industry Canada Test Site Registration Number (OATS-10m)..: 9543C-1 Tested by ........................... .......: Parm Singh and Rajinder Atwal Reviewed by............................: Aman Jathaul Sample Information: Product Name...........................: t37 (Public Safety 150M/450M) Part Number............................: t37 DUV-S4N Company:...............................: Dali Wireless (Canada) Inc. Received Date:........................: 21Jul2014 Received By............................: David Johanson Sample Log.............................: QAI Product Control Log (QM 1301 - Sample Inventory) Environmental Conditions: Indoor – 28 July to 11 August 2014: Temperature: 23ºC R.H.: 40.0% Client: Dali Wireless (Canada) Inc. Job No.: E10454-1401A Date: August 12, 2014 Page 7 of 16 Measurement Uncertainty Radio Frequency .................................…

Text truncated - open the document above for the full version.

pg. 1 ________________________________________________ 8618 Commerce Court Burnaby, BC V5A 4N6, Canada PH: 1 604.420.7760 FAX: 1 604.420.7730 EMAIL: [email protected] _________________________________________________ FCC PARTS 2, 90 TEST REPORT Applicant Dali Wireless, Inc. Address 8618 Commerce Court, Burnaby, British Columbia, V5A 4N6, Canada FCC ID HCOT37DVUS4A Model Number T37-DVU-S4N Product Description 150, 450 Remote Unit, Dual-Band Medium Power Date Sample Received Aug 1st, 2014 Date Sample Tested Aug 1st to Aug 12th, 2014 Tested by Guihua Sophie Piao Approved by Daryl Meerkerk Report No. T37-DVU-S4N Test Results Compliant This document contains information proprietary to Dali Wireless, Inc., to its subsidiaries, or to a third party to which Dali Wireless, Inc. may have a legal obligation to protect such information from unauthorized disclosure, use or duplication. Any disclosure, use or duplication of this document or of any of the information contained herein for other than the specific purpose for which it was disclosed is expressly prohibited, except as Dali Wireless, Inc. may otherwise agree to in writing. pg. 2 Revision History Revision Date Reason For Change Author(s) 0.1 Aug. 04, 2014 Initial Data S. Piao 0.2 Aug. 12, 2014 TIMCO feedback, correct the frequencies tested in 150MHz which fall into Part 90 PLMRS pools S. Piao 0.3 Sep 10, 2014 IMD and NF data added S. Piao 0.4 Sep 23, 2014 Declare the minimum cable loss and maximum antenna gain attached to the t37 remote unit in order to meet 90.219(e)(1) 5 W ERP limit. S. Piao pg. 3 Table of Contents Revision Description 2 Table of Contents 3 Acronyms and Abbreviations 4 1.0 OVERVIEW .................................................................................................................................................. 6 1.1 Scope ..................................................................................................................................................... 6 1.2 Attestation Statement ............................................................................................................................. 6 1.3 Report Summary .................................................................................................................................... 6 1.4 Test Environment ................................................................................................................................... 7 1.5 Test Setup .............................................................................................................................................. 7 1.6 Device Under Test Information ............................................................................................................. 8 1.7 Measurement Uncertainty ..................................................................................................................... 9 1.8 Equipment List ....................................................................................................................................... 9 1.9 Test Procedure .................................................................................................................................... 10 1.10 Operational Description ................................................................................................................. 11 1.11 RF Signal Configuration ................................................................................................................ 11 2.0 OUTPUT POWER – PURSUANT 47 CFR 2.1046(A) ............................................................................. 13 2.1 Methodology ........................................................................................................................................ 13 2.2 Test Results .......................................................................................................................................... 13 3.0 OCCUPIED BANDWIDTH PURSUANT 47 CFR 2.1049 AND 90.209 ................................................. 21 3.1 Methodology ........................................................................................................................................ 21 3.2 Test Results .......................................................................................................................................... 21 4.0 SPECTRUM EMISSION MASK PURSUANT 90.210 (D) ..................................................................... 25 4.1 Methodology ........................................................................................................................................ 25 4.2 Test Results .......................................................................................................................................... 25 5.0 UNWANTED EMISSIONS - CONDUCTED SPURIOUS PURSUANT 90.219(E)(3) ......................... 28 5.1 Methodology ........................................................................................................................................ 28 5.2 Test Results .......................................................................................................................................... 28 6.0 FREQUENCY STABILITY PURSUANT 47 CFR 90.213 ...................................................................... 35 6.1 Methodology ........................................................................................................................................ 35 6.2 Test Results .......................................................................................................................................... 35 7.0 PASSBAND GAIN AND BANDWIDTH .................................................................................................. 37 7.1 Methodology ........................................................................................................................................ 37 7.2 Test Results ................................…

Text truncated - open the document above for the full version.

Client: Dali Wireless (Canada) Inc. Job No.: E10454-1402B Date: August 5, 2014 Page 1 of 1 HCOT37DVUS4A Test Setup Photos Picture 1: Radiated Emission test setup in Semi Anechoic Chamber Picture 2: Radiated Emission test setup in Semi Anechoic Chamber Test Setup t-Series t37ps Dual-Band Medium Power Remote Unit Dali Wireless, Inc. 535 Middlefield Road, Suite 280 Menlo Park, CA 94025 http://www.daliwireless.com © Copyright 2014 Dali Wireless. All Rights Reserved Figure 1 Conducted Test Setup – EUT Figure 2 Conducted Test Setup – EUT Close Up Figure 3 Conducted Test Setup – Measurement Instruments