HCQ3B64X9RUXWaterproof Senior Living Pendant

8/28/14 06536A_v9 © Inovonics, 2014 - www.inovonics.com EN1221S-60N Waterproof Senior Living Pendant with Neck Lanyard and EN1221S- 60W Waterproof Senior Living Pendant with Wristband Installation and Operation Manual 1 Overview The Inovonics senior living pendant provides residents with the comfort that help is just a button press away, while providing the advanced functionality and reliability that caregivers depend on. Note: For UL 2560 installations, refer to the EN6080 Area Control Gateway Installation Instructions or the EN6040-T Network Coordinator with Transformer Installation Instructions. 1.1 Inovonics Wireless Contact Information If you have any problems with this procedure, contact Inovonics technical services: • E-mail: [email protected]. • Phone: 1.800.782.2709, option 2. 1.2 Maximum Number of Repeaters for a UL 2560 Installation To achieve the 99.99% alarm message reliability required for UL 2560 compliance, system installations must operate within the following limits for end device and repeater counts. 1.3 Senior Living Pendant Components Figure 1 Senior living pendant components (EN1221S-60N shown) 1.4 What’s In The Carton Individually-packaged products include the following items: • One unattached lanyard for the EN1221S-60N; one attached wristband for the EN1221S-60W • One CR2032 coin cell battery • One battery door Note: Bulk-packaged products are shipped with multiples of the above items. 2 Installation and Startup 2.1 Installation Notes • These products are designed to be maintained by professional technicians. • Products are intended for indoor use. • All products should be manually tested weekly (see section 6, “Test the Transmitter”). 2.2 Battery Installation Caution: If you are installing batteries in multiple devices, keep the batteries from coming into contact with each other to prevent discharge. 1.Place the battery in the battery compartment, ensuring that the positive terminal (+) faces up. 2.Seat the battery door over the battery so that the arrow on the battery door is lined up with the unlocked padlock icon. Figure 2 Battery door in the unlocked position For product and installation videos visit us at www.inovonics.com/video/en1221s or use the QR code below. End DevicesMaximum Repeaters 150397 250386 350375 500360 1000313 2000238 3000184 AActivation buttonBTransmit and alarm clear LED CLow battery LED DBattery doorEAttachment loop B C A D E Unlocked position 8/28/14 06536A_v9 © Inovonics, 2014 - www.inovonics.com 2 3.Use the ACC680 alarm clearance card or a quarter to turn the battery door to line up the arrow on the battery door with the arrow under the locked padlock icon. Figure 3 Battery door in the locked position 4.Press the activation button. • The green LED will light briefly, and then the red LED will flash and the pendant will vibrate, indicating that an alarm has been sent. 5.Clear the alarm sent when you activated the pendant per section 3.2, “Clear an Alarm”. 2.3 Register the Transmitter The transmitter sends a check-in message to the receiver or gateway every 60 minutes for the purposes of supervision. The transmitter must be registered and supervised. Each transmitter has a unique factory-programmed identification number. Refer to the receiver or gateway's installation instructions for details on registering and setting up supervision. 6.When prompted by the receiver or gateway to reset transmitter, press the activation button, and then clear the alarm per section 3.2, “Clear an Alarm”. Caution: The transmitter should be tested after registration to ensure operation. See section 6, “Test the Transmitter”. 2.4 Wear the Transmitter The pendant transmitter can be worn in three ways: • Around the neck with the ACC681 neck lanyard, which is included with the EN1221S-60N waterproof senior living pendant with neck lanyard. Caution: The neck lanyard included with the senior living pendant is designed with a breakaway feature for user safety. Substitution of a stronger cord or chain may result in injury to the wearer. • On the arm with the ACC682 wristband, which comes attached on the EN1221S-60W waterproof senior living pendant with wristband. • On the belt, using the optional ACC683 belt loop attachment kit. ACC681 Neck Lanyard To attach the ACC681 neck lanyard: 7.Secure the lanyard to the pendant’s attachment loop with a simple girth hitch knot. Figure 4 A simple girth hitch knot 8.Adjust the neck lanyard to the wearer’s neck size. • Pull both slide adustment tabs on the lanyard to reduce the length of the cord. • Pull both sides of the lanyard cord to increase the length of the cord. Figure 5 Adjust the neck lanyard ACC682 Wristband The ACC682 wristband comes attached to the EN1221S-60W waterproof senior living pendant with wristband. The wristband is a standard 16mm width, allowing for easy replacement with the wristband of the user’s choice. Note: Replacement wristbands must be of a similar thickness to the provided 16mm wristband. Metal expansion bands will not attach reliably to the device. 3 Operate the Transmitter 3.1 Send an Alarm To send an alarm: 1.Press the activation button for at least one second. • When activated, the pendant will vibrate briefly and the red transmission LED will blink rapidly for the first five seconds, and then slowly until the alarm is cleared. 3.2 Clear an Alarm There are two ways to clear an alarm: Using the Alarm Clearance Card Note: The ACC680 alarm clearance card is an optional accessory sold separately. 1.Place the dot on the ACC680 alarm clearance card over the activation button. • The red transmission LED will cease flashing and the blue alarm clear LED will flash quickly six times to indicate the alarm has cleared. Figure 6 Place the alarm clearance card over the activation button Using a Button Pattern 1.Press the activation button three times, quickly. 2.When the blue LED flashes twice, press the activation button three more times, quickly. • The blue alarm clear LED will flash quickly six times …

Text truncated - open the document above for the full version.

Request for Confidentiality Date: August 29, 2014 Subject: Confidentiality Request for: FCC ID: HCQ3B64X9RUX/ Industry Canada ID: 2309A-4X9RUX Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: Inovonics Wireless Corporation has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Sincerely, Corey Leavitt By: __________________________ ________________________ (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

EXTERNAL PHOTOS FCC IC: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX FRONT BACK

TRANSMITTER ID TEXT TEXT SIZE: CENTURY GOTHIC 5 BOLD TRANSMITTER ID PREFIX NUMBER TEXT SIZE: CENTURY GOTHIC 5 BOLD PART OUTLINE DATE CODE TEXT SIZE: CENTURY GOTHIC 5 BOLD PRINT LOCK AND UNLOCK SYMBOLS PRODUCT NAME TEXT SIZE: CENTURY GOTHIC 7 BOLD 4mm 2D BAR CODE CONTAINS TX ID NUMBER FCC INFO TEXT SIZE: CENTURY GOTHIC 4 BOLD .980 R.545 R.579 R.795 R.530 A 0 .269 .318 .476 .503 .552 0 .028 .103 .431 .533 .620 .649 .777 DETAIL A SCALE 3 : 1 NOTES: UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES1. OUTLINE INDICATES PRINTABLE AREA NOT ACTUAL PART.2. COLOR OF TEXT: BLACK CONTRAST TBD BY TEST SETUP3. ARTWORK TO BE SUPPLIED BY INOVONICS.4. A CERTIFICATION OF COMPLIANCE FOR MATERIAL AND QAP 5. SPECIFICATION TO BE SUPPLIED WITH EACH SHIPMENT. ALL MATERIALS MUST BE RoHS COMPLIANT TO THE CURRENT 6. REVISION OF EU DIRECTIVE 2011/65/EU. REFERENCE QUALITY ACCEPTANCE PLAN (QAP) DOC. QAP-06612.7. CIRCLED DIMENSIONS ARE FOR QAP INSPECTION.8. PRELIMINARY SCALE: 1:1 UNLESS OTHERWISE SPECIFIED SIZE: DESCRIPTION: PART NO: WWW.INOVONICS.COM LBL-PEND1 BOT-LZR ETCH TEMPLATE 8/19/2014SCALE: 2:1 SL SEE NOTES VOLUME: MATERIAL: TOLERANCE: AUTHOR: DRAWN DATE: REV. SHEET 1 OF 1 B CAD GENERATED DRAWING, DO NOT MANUALLY UPDATE OR SCALE DRAWING. XXX=+/- .005 1867.829 CONFIDENTIAL DOCUMENTATION XX=+/- .010 THE INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL TO AND THE SOLE PROPERTY OF INOVONICS CORPORATION. RECEIPT OF THIS INFORMATION REQUIRES THE EXISTENCE AND FULL ACCEPTANCE OF THE TERMS AND CONDITIONS OF A NON DISCLOSURE AGREEMENT AND SIGNED BY THE INOVONICS CORPORATION AND THE RECIPIENT. THIS DOCUMENTATION IS NOT TO BE REPRODUCED OR REDISTRIBUTED EXCEPT AS PROVIDED IN THE NON DISCLOSURE AGREEMENT. 06612 A

FCC ID: HCQ3B64X9RUX IC ID: 2309A-4X9RUX Internal Photos – EN1221S-60 Printed Circuit Assembly Front Back

FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX RF Exposure Information: SAR Test Exclusion Threshold – The transmitter has a maximum duty cycle of .0625, which is controlled by software; it cannot transmit continuously or at a faster rate. The calculation for the SAR exclusion threshold is: [.0625 (Duty Cycle)] · [(max. power of channel)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 The measured power for the transmitter is 18.41 mW. The minimum distance from any radiating element and the user is 7.37 mm. Under these conditions, the threshold calculation is: 15.928. 37.7 41.18 0625.0 mm mW This is well below the threshold for requiring SAR testing.

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. EMC Report for Inovonics on the Model: EN1221S Page 1 of 76 TEST REPORT Report Number: 101673436DEN-001 Project Number: G101673436 Report Issue Date: 8/14/2014 Product Designation: Model: EN1221S-60 Standards: FCC title 47 CFR part 15 subpart C (Part 15.247) RSS-210, Issue 8: 2010 RSS-GEN, Issue 3: 2010 CISPR 22: 2008 Tested by: Client: Intertek Testing Services NA, Inc. 1795 Dogwood St. Suite 200 Louisville, CO 80027 Inovonics Wireless Corp. 397 South Taylor Ave. Louisville, CO 80027 Report prepared by Report reviewed by Randy Thompson Senior EMC Project Engineer Jason Centers Staff Engineer Intertek Report Number: 101673436DEN-001 Issued: 8/14/2014 EMC Report for Inovonics on the Model: EN1221S-60 Page 2 of 76 TABLE OF CONTENTS 1 Introduction and Conclusion .............................................................................................................. 3 2 Test Summary ...................................................................................................................................... 3 3 Description of Equipment Under Test ............................................................................................... 5 4 System setup including cable interconnection details, support equipment and simplified block diagram ........................................................................................................................................................ 9 5 Radiated Emissions – Intentional Radiators: Output Power – Tx Fundamental – FCC 15.247(b)(2) ................................................................................................................................................ 11 6 Radiated Emissions – Intentional Radiators: Tx Harmonics of the Fundamental – Includes Restricted Band - FCC 15.247(d)/ 15.209(a)/15.205 ................................................................................ 18 7 Tx Band Edge & Restricted Band – FCC 15.247(d)/15.205(a)/15.209(a) ........................................ 26 8 Radiated Emissions Tx Spurious 20dBc (Harmonics & Non Harmonics).................................... 30 9 Unintentional Radiated Emissions - Idle/Standby Mode of Operation – FCC 15.109/ CISPR 22 40 10 20 dB Bandwidth – FCC 15.247 (a)(1)(i)........................................................................................ 49 11 Carrier Frequency Separation – FCC 15.247 (a)(1)...................................................................... 54 12 Number of Hopping Frequencies – FCC 15.247 (a)(1)(i) ............................................................. 57 13 Time of Occupancy (Dwell Time) – FCC 15.247 (a)(1)(i) ............................................................. 60 14 Occupied Bandwidth (OBW) – RSS-GEN, 4.6.1 ........................................................................... 68 15 Tx AC Power Conducted Emissions – Test not Applicable ....................................................... 73 16 Measurement Uncertainty.............................................................................................................. 74 17 Appendix A: Product Modifications - Not Required ................................................................... 75 18 Revision History ............................................................................................................................. 76 Intertek Report Number: 101673436DEN-001 Issued: 8/14/2014 EMC Report for Inovonics on the Model: EN1221S-60 Page 3 of 76 1 Introduction and Conclusion The tests indicated in section 2.0 were performed on the product constructed as described in section 3.0. The remaining test sections are the verbatim text from the actual data sheets used during the investigation. These test sections include the test name, the specified test Method, a list of the actual Test Equipment Used, documentation Photos, Results and raw Data. No additions, deviations, or exclusions have been made from the standard(s) unless specifically noted. Based on the results of our investigation, we have concluded the product tested Complies with the requirements of the standard(s) indicated. The results obtained in this test report pertain only to the item(s) tested. 2 Test Summary Section Test full name Test date Result 5 Radiated Emissions – Output Power of the Tx Fundamental - FCC 247(b)(2) Covers RSS-210 A8.4(1) 07/02/2014 Pass 6 Radiated Emissions – Tx Harmonics of the Fundamental – Includes Restricted Band - FCC 247(d)/ 15.209(a)/15.205 Covers RSS-210 A8.5/ RSS-GEN, 7.2.2 07/02/2014 Pass 7 Tx Band Edge & Restricted Band – FCC 15.247(d)/15.205/209 Covers RSS-210 A8.5/RSS-GEN, 7.2.2 07/03/2014 Pass 8 Radiated Emissions – Tx Spurious Emissions – 20dBc (Harmonics & Non Harmonics) - FCC 15.247(d) Covers RSS-210 A8.5 07/03/2014 Pass 9 Radiated Emissions – Idle/Standby Unintentional Emissions - FCC 15.109/ CISPR 22 Covers RSS-GEN, 7.2.5 07/03/2014 Pass 10 20 dB Bandwidth – FCC 15.247 (a)(1)(i) Covers RSS-210 A8.1(c) 07/03/2014 Pass 11 Carrier Frequency Separation – FCC 15.247 (a)(1) Covers RSS-210 A8.1(b) 07/03/2014 Pass 12 Number of Hop…

Text truncated - open the document above for the full version.

1 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 2 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 3 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 4 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 5 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 6 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 7 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 8 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 9 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 10 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 11 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX 12 FCC ID: HCQ3B64X9RUX EN1221S-60 IC ID: 2309A-4X9RUX