HCQ3B6EXTWRMTwo-way Serial Data Transceiver

=N qïçJt~ó=oc=jçÇìäÉ=lîÉêîáÉï NKN==fåíêçÇìÅíáçå bÅÜçpíêÉ~ã=oc=ãçÇìäÉë=~êÉ=ÇÉëáÖåÉÇ=íç=ÄÉ=É~ëáäó=áåíÉêÑ~ÅÉÇ=ïáíÜ=óçìê=ÉäÉÅíêçåáÅ=êÉãçíÉ= ~ééäáÅ~íáçå=ÅçåíêçääÉê=Eo^`FK=oc=ãçÇìäÉë=~ääçï=íÜÉ=~ëëáãáä~íáçå=çÑ=~åó=ìëÉêJëéÉÅáÑáÅ= ~ééäáÅ~íáçå=áåíç=~å=bÅÜçpíêÉ~ã=ëóëíÉãK=låÅÉ=áåíÉÖê~íÉÇ=ïáíÜ=ÉñáëíáåÖ=éêçÇìÅíëI=oc= ãçÇìäÉë=éêçîáÇÉ=óçì=ïáíÜ=ÅçãéäÉíÉ=bÅÜçpíêÉ~ã=ÑìåÅíáçå~äáíóK NKO==qïçJt~ó=pÉêá~ä=a~í~=oc=jçÇìäÉ=`çãéçåÉåíë qÜÉ=bkPVQOup=áë=~=íïçJï~ó=ëÉêá~ä=Ç~í~=íê~åëÅÉáîÉêI=ÇÉëáÖåÉÇ=íç=éÜóëáÅ~ääó=áåíÉêÑ~ÅÉ=ïáíÜ= lbj=éêçÇìÅíëK=pÉêá~ä=Ç~í~=ëÉåí=íç=íÜÉ=bkPVQOup=Ñêçã=óçìê=êÉãçíÉ=~ééäáÅ~íáçå=ÅçåíêçääÉê= áë=Ñçêã~ííÉÇ=Äó=íÜÉ=bkPVQOupK=qÜÉ=Ç~í~=áë=íÜÉå=íê~åëãáííÉÇ=~ë=~å=oc=ãÉëë~ÖÉ=íç=íÜÉ= åÉíïçêâ=ÅççêÇáå~íçêK==iáâÉïáëÉI=oc=ãÉëë~ÖÉë=êÉÅÉáîÉÇ=Äó=íÜÉ=bkPVQOup=~êÉ=Ñçêã~ííÉÇ= ~åÇ=íÜÉå=ëÉåí=~ë=ëÉêá~ä=Ç~í~=íç=íÜÉ=lbj=~ééäáÅ~íáçå=ÅçåíêçääÉê=ÇÉîáÅÉK =cáÖìêÉ=NJN=bkPVQO=qïçJt~ó=pÉêá~ä=a~í~=oc=jçÇìäÉ=`çãéçåÉåíë oÉëÉí= _ìííçå ^åíÉåå~ kç=`çååÉÅíáçå oÉëÉí a~í~=fåéìí a~í~=lìíéìí kç=`çååÉÅíáçå dêçìåÇ mçïÉê q~ãéÉê=få qê~åëãáí= iba oÉÅÉáîÉ= iba qïçJt~ó=pÉêá~ä=a~í~=oc=jçÇìäÉ=`çãéçåÉåíë O= =cáÖìêÉ=NJO=bkPVQO=qïçJt~ó=pÉêá~ä=a~í~=oc=jçÇìäÉ=aáãÉåëáçåë =cáÖìêÉ=NJP=bkPVQO=qïçJt~ó=pÉêá~ä=a~í~=oc=jçÇìäÉ=jçìåíáåÖ=eçäÉ=aáãÉåëáçåë mçïÉê==qÜÉ=bkPVQOup=Ü~ë=~å=çåJÄç~êÇ=îçäí~ÖÉ=êÉÖìä~íçêK=`çååÉÅí=éçïÉê=Å~ÄäáåÖ=íç=~å= ÉñíÉêå~ä=éçïÉê=ëìééäó=çÑ=PKS=íç=RKR=îçäíëK a~í~=çìíéìí==lìíéìíë=ãÉëë~ÖÉë=íç=íÜÉ=o^`K a~í~=áåéìí==fåéìíë=ãÉëë~ÖÉë=íç=íÜÉ=o^`K fåíÉêêìéíLÉå~ÄäÉ==`çååÉÅíë=~å=áåéìí=íç=~Åíáî~íÉ=çê=ÇÉ~Åíáî~íÉ=bkPVQOup=ëäÉÉé=ãçÇÉK KPURÒ=íç= `ÉåíÉê=çÑ= cáêëí=máå KMVMÒ=íç= `ÉåíÉê=çÑ= máå máíÅÜW= OKRQããK NKRRÒ KRÒ PKRÒ NKPTRÒ=íç=`ÉåíÉê=çÑ= jçìåíáåÖ=eçäÉ KNMRÒ=íç=`ÉåíÉê= çÑ=jçìåíáåÖ= eçäÉ NKSÒ=íç=`ÉåíÉê=çÑ= jçìåíáåÖ=eçäÉ KQRR=íç=`ÉåíÉê=çÑ= jçìåíáåÖ=eçäÉ KNRSÒ= o~Çáìë KNRSÒ= o~Çáìë qïçJt~ó=oc=jçÇìäÉ=lîÉêîáÉï =P dêçìåÇ==`çååÉÅíë=íç=ÖêçìåÇK q~ãéÉê=áåéìí==`çååÉÅíë=~=í~ãéÉê=áåéìí=íç=ëÉåÇ=~=ãÉëë~ÖÉ=ïÜÉå=ìëÉêJëéÉÅáÑáÅ=ÉåÇJ ÇÉîáÅÉ=áë=í~ãéÉêÉÇ=ïáíÜK oÉëÉí=áåéìí==`çååÉÅíë=~=êÉëÉí=áåéìí=íç=êÉëÉí=íÜÉ=íïçJï~ó=ëÉêá~ä=Ç~í~=oc=ãçÇìäÉ=~ÑíÉê=~= ÑêÉèìÉåÅó=Ä~åÇ=ëÉäÉÅíáçå=ÅÜ~åÖÉ=~åÇ=íç=áåáíá~íÉ=~å=oc=íê~åëãáëëáçåK oÉëÉí=Äìííçå==mêÉëë=íç=êÉëÉí=íÜÉ=íïçJï~ó=ëÉêá~ä=Ç~í~=oc=ãçÇìäÉ=~ÑíÉê=~=ÑêÉèìÉåÅó=Ä~åÇ= ëÉäÉÅíáçå=ÅÜ~åÖÉK jçìåíáåÖ=eçäÉ==rëÉÇ=íç=ãçìåí=íÜÉ=íïçJï~ó=ëÉêá~ä=Ç~í~=oc=ãçÇìäÉ=íç=íÜÉ=ìëÉêJëéÉÅáÑáÅ= éêçÇìÅíK=qÜÉ=ãçìåíáåÖ=ÜçäÉ=ëÜçìäÇ=çåäó=ÄÉ=ìëÉÇ=ïáíÜ=~=åóäçå=ëí~åÇçÑÑI=åÉîÉê=ãÉí~äK NKOKN==ibaë bkPVQOup=íïçJï~ó=ëÉêá~ä=Ç~í~=oc=ãçÇìäÉë=Ü~îÉ=íïç=ibaëK=låÉ=áääìãáå~íÉë=ïÜÉå=~å=oc= íê~åëãáëëáçå=áë=ÄÉáåÖ=ã~ÇÉI=~åÇ=íÜÉ=çíÜÉê=áääìãáå~íÉë=ïÜÉå=~å=oc=ãÉëë~ÖÉ=áë=ÄÉáåÖ= êÉÅÉáîÉÇK NKP==qïçJt~ó=pÉêá~ä=a~í~=oc=jçÇìäÉ=oÉèìáêÉãÉåíë NKPKN==qáãáåÖ=oÉèìáêÉãÉåíë ^ää=Ç~í~=áë=ëÉåí=~í=~=ÇÉÑ~ìäí=ê~íÉ=çÑ=VSMM=Ä~ìÇI=åç=é~êáíóI=U=Ç~í~=Äáíë=~åÇ=çåÉ=ëíçé=ÄáíK=qÜÉ= Ç~í~=áë=íê~åëãáííÉÇ=äÉ~ëí=ëáÖåáÑáÅ~åí=Äáí=ÑáêëíK NKPKO==mçïÉê=oÉèìáêÉãÉåíë qÜÉ=éêçíçíóéÉ=íïçJï~ó=ëÉêá~ä=Ç~í~=oc=ãçÇìäÉë=ïáíÜ=opOPO=Ç~í~=äÉîÉäë=~ÅÅÉéí=HR=sa`=~ë= íÜÉ=éçïÉê=áåéìíX=íÜÉ=íïçJï~ó=ëÉêá~ä=Ç~í~=oc=ãçÇìäÉë=ïáíÜ=äçÖáÅ=Ç~í~=äÉîÉäë=ìëÉ=PKS=íç=RKR= îçäíëK NKPKP==`ìêêÉåí=aê~ï qÜÉ=åçêã~ä=êÉÅÉáîÉ=áë=SM=ã^=ã~ñáãìãX=íÜÉ=íê~åëãáí=éÉ~â=áí=NNR=ã^=ã~ñáãìãK c``=i~ÄÉä=oÉèìáêÉãÉåíë Q= NKQ==c``=i~ÄÉä=oÉèìáêÉãÉåíë fåçîçåáÅë=táêÉäÉëë=Ü~ë=êÉÅÉáîÉÇ=cÉÇÉê~ä=`çããìåáÅ~íáçåë=`çããáëëáçå=Ec``F=~åÇ= fåÇìëíêó=`~å~Ç~=Ef`F=~ééêçî~ä=íç=ã~êâÉí=oc=ãçÇìäÉëK=qÜÉ=~ééäáÅ~íáçå=áåíÉÖê~íçê=áë= êÉëéçåëáÄäÉ=Ñçê=éêçéÉêäó=ä~ÄÉäáåÖ=íÜÉ=éêçÇìÅí=Åçåí~áåáåÖ=íÜÉ=oc=ãçÇìäÉK=i~ÄÉäë=ãìëí=ÄÉ= éä~ÅÉÇ=çå=íÜÉ=çìíëáÇÉ=çÑ=íÜÉ=éêçÇìÅíI=~åÇ=ãìëí=áåÅäìÇÉ=~=ëí~íÉãÉåí=áåÇáÅ~íáåÖ=íÜÉ=éêçÇìÅí= Åçåí~áåë=íÜÉ=ãçÇìäÉI=~äçåÖ=ïáíÜ=íÜÉ=c``=fa=åìãÄÉêK bñ~ãéäÉ=N=“`çåí~áåë=oc=jçÇìäÉ=c``=faW=e`nP_SbuqtojX=f`=faW=OPMV^JbuqtojÒ bñ~ãéäÉ=O=“`çåí~áåë=c``=faW=e`nP_SbuqtojX=f`=faW=OPMV^JbuqtojÒ

October 18, 2007 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Modular Approval Cover Letter, per FCC Public Notice DA 00-1407; FCC ID: HCQ3B6EXTWRM To Whom It May Concern: In compliance with FCC Public Notice DA 00-1407, we are submitting this cover letter requesting modular approval. The eight requirements (listed below) identified in the Public Notice are addressed within the Application for Equipment Authorization. 1.) The RF portion of the circuit has its own shield. The module is not dependent on any additional shielding. 2.) The data inputs are isolated from the transmitter circuitry through multiple levels of buffering (inverters, microprocessors, etc.). Input data rate does not affect modulation. 3.) The modular transmitter has its own voltage regulator, U4 on the schematic. 4.) The antenna on the modular transmitter is a printed trace on the PCB; it is permanently attached. 5.) The module was tested in a stand-alone configuration. Power was supplied by two 3.2 VDC batteries connected in series. The length of the wire connection between the batteries and module was representative of a worst-case application. 6.) The modular transmitter will be labeled with its own FCC ID number (see submitted picture). Exterior label instructions for the device into which the module will be installed, stating the wording requirements, will be included with the module. 7.) The modular transmitter was tested to and conforms to Sections 15.109, 15.205, 15.207, 15.209, and 15.247 of the FCC Rules and Regulations. Test report attached as separate exhibit. 8.) RF Exposure Information is included in Application as separate exhibit. Please don’t hesitate to contact me if you need any further information. Thank you. Sincerely, Joni Ripper Engineering Assistant Inovonics Wireless Corp. 303-209-7260 [email protected]

October 18, 2007 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality for FCC ID# HCQ3B6EXTWRM To Whom It May Concern: The following documents being submitted with the Application for Equipment Authorization for FCC ID# HCQ3B6EXTWRM are marked “Confidential”. We request that you maintain these documents in the non-public file and withhold them from public inspection, pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act. This confidentiality is necessary to protect proprietary information, and falls under the category of “Trade Secrets”. 1) Operational Description 2) Schematics 3) Block Diagram 4) User’s Manual (excerpt from Developer’s Guide, and will not be available to the end user). Thank you. Sincerely, Joni Ripper Engineering Assistant Inovonics Wireless Corp. 303-209-7260 [email protected]

February 22, 2008 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality for FCC ID# HCQ3B6EXTWRM To Whom It May Concern: The following documents being submitted with the Application for Equipment Authorization for FCC ID# HCQ3B6EXTWRM are marked “Confidential”. We request that you maintain these documents in the non-public file and withhold them from public inspection, pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act. This confidentiality is necessary to protect proprietary information, and falls under the category of “Trade Secrets”. 1) Operational Description 2) Schematics 3) Block Diagram Thank you. Sincerely, Joni Ripper Engineering Assistant Inovonics Wireless Corp. 303-209-7260 [email protected]

FCC ID: HCQ3B6EXTWRM EN3942XS External Photos: This product is a module only, so there are no external photos.

FCC ID: HCQ3B6EXTWRM EN3942XS FCC ID Number on Module: FCC ID: HCQ3B6EXTWRM

c``=i~ÄÉä=oÉèìáêÉãÉåíë Q=`çåÑáÇÉåíá~ä NKQ==c``=i~ÄÉä=oÉèìáêÉãÉåíë fåçîçåáÅë=táêÉäÉëë=Ü~ë=êÉÅÉáîÉÇ=cÉÇÉê~ä=`çããìåáÅ~íáçåë=`çããáëëáçå=Ec``F=~åÇ= fåÇìëíêó=`~å~Ç~=Ef`F=~ééêçî~ä=íç=ã~êâÉí=oc=ãçÇìäÉëK=qÜÉ=~ééäáÅ~íáçå=áåíÉÖê~íçê=áë= êÉëéçåëáÄäÉ=Ñçê=éêçéÉêäó=ä~ÄÉäáåÖ=íÜÉ=éêçÇìÅí=Åçåí~áåáåÖ=íÜÉ=oc=ãçÇìäÉK=i~ÄÉäë=ãìëí=ÄÉ= éä~ÅÉÇ=çå=íÜÉ=çìíëáÇÉ=çÑ=íÜÉ=éêçÇìÅíI=~åÇ=ãìëí=áåÅäìÇÉ=~=ëí~íÉãÉåí=áåÇáÅ~íáåÖ=íÜÉ=éêçÇìÅí= Åçåí~áåë=íÜÉ=ãçÇìäÉI=~äçåÖ=ïáíÜ=íÜÉ=c``=fa=åìãÄÉêK bñ~ãéäÉ=N=“`çåí~áåë=oc=jçÇìäÉ=c``=faW=e`nP_SbuqtojX=f`=faW=OPMV^JbuqtojÒ bñ~ãéäÉ=O=“`çåí~áåë=c``=faW=e`nP_SbuqtojX=f`=faW=OPMV^JbuqtojÒ

FCC ID: HCQ3B6EXTWRM EN3942XS Internal Photos: PCB Front with Shield Can PCB Front Under Shield Can PCB Trace Antenna FCC ID: HCQ3B6EXTWRM EN3942XS Internal Photos (cont’) PCB Back

• P.O. Box 489 • 1350 Tolland Road • Rollinsville, CO 80474 • Phone: (303) 258-0100 • FAX: (303) 258-0775 • • www.criteriontech.com • CONFIDENTIAL AND PROPRIETARY NVLAP LAB CODE 100396-0 EMC QUALIFICATION TEST REPORT INOVONICS WIRELESS CORPORATION ES SERIAL TRANCEIVER, EN3942XS TESTED TO CONFORM WITH: Emissions Standards for INFORMATION TECHNOLOGY EQUIPMENT (ITE) TEST REPORT NUMBER: 070410-1141C DATE OF ISSUE: SEPTEMBER 7, 2007 DATE OF TEST COMPLETION: JULY 3, 2007 MANUFACTURER’S ADDRESS: 315 CTC BLVD. LOUISVILLE, CO 80027 PHONE: (303) 939-9336 Approved by: Laboratory Director Sheet 2 of 26 EMC QUALIFICATION TEST REPORT CRITERION TECHNOLOGY 070410-1141C FOR Inovonics Wireless Corporation CONFIDENTIAL AND PROPRIETARY DISCLAIMERS This report is the confidential property of the client. For the protection of our clients and ourselves, extracts from this test report cannot be produced without prior written approval from Criterion Technology. Reproduction of the complete report can be performed at the client’s discretion. The client is aware that Criterion Technology has performed testing in accordance with the applicable standard(s). Test data is accurate within ANSI parameters for Emissions testing, unless a specific level of accuracy has been defined in writing prior to testing, by Criterion Technology and the client. Criterion Technology reports apply only to the specific Equipment Under Test (EUT) sample(s) tested under the test conditions described in this report. If the manufacturer intends to use this report as a document demonstrating compliance of this model, additional models of this product must have electrical and mechanical characteristics identical to the device tested for this report. Criterion Technology shall have no liability for any deductions, inferences, or generalizations drawn by the client or others from Criterion Technology issued reports. Total liability is limited to the amount invoiced for the testing of this EUT and the contents of this report are not warranted. Compliance with the appropriate governmental standards is the responsibility of the manufacturer. Any questions regarding this report should be directed to: Laboratory Director Criterion Technology Corp. P.O. Box 489 1350 Tolland Road Rollinsville, Colorado 80474 Phone: (303) 258-0100 Fax: (303) 258-0775 mailto:[email protected] NVLAP Note: Criterion Technology is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) for the specific scope of accreditation under Lab Code 100396-0. Test methods included in Lab Code 100396-0 are 12/CIS11a - IEC/CISPR 11, edition 3.1 (1999-08) 12/CIS11b - IEC/CISPR 11 (2003) & EN 55011 (1998), A1 (1999), A2 (2002) 12/CIS11c - IEC/CISPR 11 (1997), A1 (1999), A2 (2002) 12/CIS11d - EN 55011 (1998), A1 (1999), A2 (2001) 12/CIS22 - IEC/CISPR 22 (1997) and EN 55022 (1998) + A1 (2000) 12/CIS22a - IEC/CISPR 22 (1993) and EN 55022 (1994), Amendment 1:1995 & Amendment 2: 1996 12/CIS22b - CNS13438 (1997) 12/EM02a - IEC 61000-3-2, Edition 2.1 (2001-10) and EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000) 12/EMO2b - IEC 61000-3-2, Second Edition (2000-08) 12/EMO2c - BS EN 61000-3-2, ED. 2 (2001); IEC 610003-2, ED. 2 (2000) 12/EM03 - ICE 61000-3-3 (1995); EN 61000-3-3 (1995); AS/NZS 2279.3 (1995) 12/EM03a - ICE 1000-3-3 (1994-12) 12/EM03b - ICE 61000-3-3 Edition 1.1 (2002-03) & EN 61000-3-3, A1 (2001) 12/EM03c - ICE 61000-3-3 (1994) with Amendment 1 (2001) 12/EM03d - ICE 61000-3-3 (1995) + A1 (2001) 12/FCC15b - ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B 12/T51 - AS/NZS CISPR 22 (2002) and AS/NZS 3548 (1997) 12/I01 – IEC 61000-4-2, Ed. 2.1 (2001), A1, A2; EN 61000-4-2 12/I02 – IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002) 12/I03 – IEC 61000-4-4 (1995), A1 (2002), A2 (2001); EN 61000-4-4 12/I04 – IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5 12/I05 – IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6 12/I06- - IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8 12/I07 – IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11 The NVLAP Logo on the front cover of this report applies only to data taken for the above test methods. This report may contain data which is not covered by the NVLAP accreditation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Criterion Technology has been accredited by the following groups: NVLAP(#100396-0), FCC(#90688), BSMI(#SL2-IN-007R), VCCI(#1255) 3&10 meter site (#R-2097), Immunity Shield room(#C-2269), Open Area Site(#C-2270), Nemko(#ELA-214), NMi (EU Competent Body Accreditation) and Canada(#IC 3301). The National Institute for Standards and Technology (NIST) has designated Criterion Technology a Conformity Assessment Body (CAB) for Taiwan (BSMI # SL2-IN-E-007R). ALL CRITERION TECHNOLOGY INSTRUMENTATION AND ACCESSORIES USED TO TEST PRODUCTS FOR COMPLIANCE TO THE INDICATED STANDARDS ARE CALIBRATED REGULARLY IN ACCORDANCE WITH ISO 9002, ISO 17025, ANSI/NCSL Z540-I-1994 AND ARE TRACEABLE TO NATIONAL STANDARDS. CRITERION TECHNOLOGY EMC QUALIFICATION TEST REPORT Sheet 3 of 26 070410-1141C FOR Inovonics Wireless Corporation CONFIDENTIAL AND PROPRIETARY TABLE OF CONTENTS 1.0 EXECUTIVE SUMMARY..............................................................................................................................................................4 1.1 PURPOSE..........................................................................................................................................................................................4 1.2 CONFORMITY................................................................................................................................................................................4 1.3 EQUIPMENT UNDER TEST (EUT)...........................................................................................................................................4 2.0 EMISSIONS TEST STANDARDS......................…

Text truncated - open the document above for the full version.

FCC ID: HCQ3B6EXTWRM EN3942XS Test Report Additional Information_1: In addition to the lab test report, additional data showing compliance with 47CFR15.247 follows. For the following measurements, the antenna was replaced by a coaxial connection to an HP8594E spectrum analyzer. Minimum Channel Separation: Plot 1 is a spectrum plot showing a minimum channel separation of 810 kHz. Compliance with section 15.247(a)(1) is demonstrated by capturing several transmissions over a small portion of the 902-928 MHz ISM band. Plot 1: Demonstration of channel spacing requirement. Number of hopping Channels: Plot 2 demonstrates compliance with 15.247(a)(1)(i) — Number of hopping channels. This is a stored display of many sequential transmissions to show the overall band occupied by the transmitter. Plot 2: Demonstration of 25 hopping channels. FCC ID: HCQ3B6EXTWRM EN3942XS Test Report Additional Information_1 Page 2 20 dB bandwidth of a single channel: Plot 3 shows the 20 dB bandwidth of a single channel to demonstrate compliance with 15.247(a)(1)(i). The 20 dB occupied bandwidth is 415 kHz. Plot 3: Demonstration of occupied bandwidth.

FCC ID: HCQ3B6EXTWRM EN3942XS Test Report Additional Information_2: Alternative to Conducted Output Power Measurements: Required conducted power output measurements at low, medium, and high channels (per 15.247(b) and (c)) could not be performed directly since the transmit antenna is integrated onto the printed circuit board. However, compliance with these requirements has been achieved by way of performing and passing the radiated tests described in the ALTERNATIVE TEST PROCEDURES in Public Notice DA 00-705, March 30, 2000. Specifically, all radiated emissions shown in the test report are less than 119.2 dBuV/m at 3 meters. This is the field strength limit corresponding to the maximum fundamental power output of 0.25 watts from an isotropic antenna per 15.247 (b) (2) for systems employing between 25 and 49 hopping channels. The calculation as detailed in the above Public Notice is as follows: E = Square Root of (30PG) all divided by d E = 912,871 uV/m = 119.21 dB uV/m where E is the maximum allowable fundamental field strength in uV/m P is the maximum allowable fundamental radiated power = 0.25 watts G is the antenna gain = 1 (Assume 1 for the worst case (lowest allowable) final field strength.) d is the measured distance = 3 meters

Sheet 8 of 26 EMC QUALIFICATION TEST REPORT CRITERION TECHNOLOGY 070410-1141C FOR Inovonics Wireless Corporation CONFIDENTIAL AND PROPRIETARY 3.0 APPENDIX A: EUT PHOTOGRAPHS 3.1RADIATED EMISSIONS CRITERION TECHNOLOGY EMC QUALIFICATION TEST REPORT Sheet 9 of 26 070410-1141C FOR Inovonics Wireless Corporation CONFIDENTIAL AND PROPRIETARY 3.2RADIATED EMISSIONS Sheet 10 of 26 EMC QUALIFICATION TEST REPORT CRITERION TECHNOLOGY 070410-1141C FOR Inovonics Wireless Corporation CONFIDENTIAL AND PROPRIETARY 3.3RADIATED EMISSIONS