HDC-17600087WiFi 7 2.5G Router

Page 1 of 2 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 April 17, 2026 Subject: Adtran Inc., Grantee Code: HDC, Attestation Statement Reference: a), b), c) FCC CFR section 2.911(d)(5)(i), FCC Section 2.911(d)(5)(ii); d) FCC Section 2.911(d)(7) a) [Adtran] (“the applicant”) certifies that the equipment [FCC ID: HDC-17600087] for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting in the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) ; (4) have a Conditional Approval from the Department of Manufacturing (DoW) or Department of Homeland Security (DHS) b) [Adtran] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. c) [Adtran] (“the applicant”) further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti- virus software is installed in the equipment being certified. Page 2 of 2 General Business The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. d) [Adtran] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. FCC US Agent Adtran Inc. Address: 901 Explorer Boulevard, Huntsville, Alabama, United States, 35806-2807 Name of contact person: Paul Stover Telephone No: 256-963-8099 E-mail: [email protected] FRN: 0005813993 Sincerely, Paul Stover Manager Regulatory Compliance Engineering Adtran Inc. Tel: 256-963-8099 E-mail: [email protected]

Page 1 of 2 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 April 17, 2026 Subject: Adtran Inc., Grantee Code: HDC, Attestation Statement Reference: a), b), c) FCC CFR section 2.911(d)(5)(i), FCC Section 2.911(d)(5)(ii); d) FCC Section 2.911(d)(7) a) [Adtran] (“the applicant”) certifies that the equipment [FCC ID: HDC-17600087] for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting in the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) ; (4) have a Conditional Approval from the Department of Manufacturing (DoW) or Department of Homeland Security (DHS) b) [Adtran] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. c) [Adtran] (“the applicant”) further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti- virus software is installed in the equipment being certified. Page 2 of 2 General Business The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. d) [Adtran] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. FCC US Agent Adtran Inc. Address: 901 Explorer Boulevard, Huntsville, Alabama, United States, 35806-2807 Name of contact person: Paul Stover Telephone No: 256-963-8099 E-mail: [email protected] FRN: 0005813993 Sincerely, Paul Stover Manager Regulatory Compliance Engineering Adtran Inc. Tel: 256-963-8099 E-mail: [email protected]

Page 1 of 1 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 March 6, 2026 Subject: Product Certification Representative Authorization Letter FCC ID: HDC-17600087 To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model SDG-8732, SDG-8732v to the FCC Rules and Regulations. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Sincerely, Paul Stover Manager Compliance Engineering ADTRAN Inc. Tel: 256-963-8099 E-mail: [email protected]

Page 1 of 2 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 March 6, 2026 Subject: Request for confidentiality FCC ID: HDC-17600087 To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s public notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission to grant short-term confidentiality request on the following attachments for 180 days. ☒ Internal Photographs ☒ User's manual ☒ Test Set up photo ☐External Photographs Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒ Block Diagram ☒ Schematics ☒ Operational Description ☐ Bill of Materials ☐ Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Page 2 of 2 General Business The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Paul Stover Manager Compliance Engineering ADTRAN Inc. Tel: 256-963-8099 E-mail: [email protected]

Page 1 of 1 March 6, 2026 Subject: Ad Hoc Mode Function Declaration FCC ID: HDC-17600087 IC: 2250A-17600087 To Whom it may concern, We, ADTRAN, declare that the device does not support any non-US channels and country code selection and Channel 12 and 13 in 2.4 GHz band in all the operational mode(s). Regards, Paul Stover Manager Compliance Engineering ADTRAN Inc. Tel: 256-963-8099 E-mail: [email protected]

Project No.: EP5D2601 Page No. : 1 of 44 Photographs of EUT Project No.: EP5D2601 Page No. : 2 of 44 Project No.: EP5D2601 Page No. : 3 of 44 Project No.: EP5D2601 Page No. : 4 of 44 Project No.: EP5D2601 Page No. : 5 of 44 Project No.: EP5D2601 Page No. : 6 of 44 Project No.: EP5D2601 Page No. : 7 of 44 Project No.: EP5D2601 Page No. : 8 of 44 Project No.: EP5D2601 Page No. : 9 of 44 Project No.: EP5D2601 Page No. : 10 of 44 Project No.: EP5D2601 Page No. : 11 of 44 Model: SDG-8732 Project No.: EP5D2601 Page No. : 12 of 44 Project No.: EP5D2601 Page No. : 13 of 44 Model: SDG-8732v Project No.: EP5D2601 Page No. : 14 of 44

I/O Panel: Debossed, 0.25mm Pad-print: PMS Cool Gray 8C Labels: RAL 9003, PMS Cool Gray 8C OS Labels PMS Cool Gray 1C, PMS Black C EMM-1 CMF - MR1 Mount Rainier 1: SDG-8732v/8732 Global “CFA” SKU SmartOS - Global SKU PlumeOS - Global SKU 12:34:56:78:9A:B0 Model: SDG-8732v WiFi 7 2.5G Router Adtran Inc. 901 Explorer Blvd, Huntsville, AL 35806 USA Telepermit Holder:Adtran Networks (NZ) Ltd PTC 220 / 26 / 001 RN = 1 Product:Adtran SDG-8732v WiFi 7 2.5G Router Telepermit Holder:Adtran Networks (NZ) Ltd PTC 220 / 26 / 001 RN = 1 Product:Adtran SDG-8732v WiFi 7 2.5G Router Quickstart Serial Number:SN = Poppins Regular, 4ptdata = Poppins Regular, ~2pt MAC Address:Poppins Regular, 4pt 8732 series only Label only applied for NZ shipments Transition to laser-etch in PVT 8 mm WIFI:S:Setup-ADTRAN- xxxx ;T:nopass;;;RG XXXXXXXXXXXX ;serialNumber: XXXXXXXXXXXX xxxx - last four digits of the base MAC address, lowercase XXXXXXXXXXXX - MAC address, no colons, uppercase 14.5 mm 6.2 mm 30.4 mm 6.6 mm 38.7 mm 66.7 mm 17 mm Quickstart 12 mm 12 mm

Report No.: FA5D2601 Page : 1 of 8 Report Version: Rev. 01 FCC RF Exposure Report FCC ID : HDC-17600087 Equipment : WiFi 7 2.5G Router Model No. : SDG-8732, SDG-8732v (Please refer to section 1.1.1 for more details) Brand Name : Adtran Applicant : Adtran Address : 901 Explorer Boulevard, Huntsville, Alabama, United States, 35806-2807 Standard : 47 CFR FCC Part 2.1091 Received Date : Dec. 26, 2025 Tested Date : Jan. 03 ~ Mar. 03, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FA5D2601 Page : 2 of 8 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 4 1.1 INFORMATION ...................................................................................................................................... 4 2 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 5 2.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 5 2.2 MPE EVALUATION FORMULA ............................................................................................................. 5 2.3 REFERENCE GUIDANCE ..................................................................................................................... 5 2.4 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 5 2.5 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 2.6 MPE EVALUATION RESULTS .............................................................................................................. 6 2.7 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION ................................................................ 7 3 TEST LABORATORY INFORMATION ................................................................................................. 8 Report No.: FA5D2601 Page : 3 of 8 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FA5D2601 Rev. 01 Initial issue Mar. 25, 2026 Report No.: FA5D2601 Page : 4 of 8 Report Version: Rev. 01 1 GENERAL DESCRIPTION 1.1 INFORMATION 1.1.1 PRODUCT DETAILS The following models are provided to this EUT. Brand Name Model Name Product Name Description Adtran SDG-8732 WiFi 7 2.5G Router w/o VoIP SDG-8732v with VoIP Report No.: FA5D2601 Page : 5 of 8 Report Version: Rev. 01 2 MPE EVALUATION OF MOBILE DEVICES 2.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE Frequency Range (MHz) Power Density (mW /cm 2 ) Averaging Time (minutes) 300~1500 F/1500 30 1500~100000 1.0 30 2.2 MPE EVALUATION FORMULA Pd = 2 * * 4 R Pi Pt Where Pd= Power density in mW/cm 2 Pt= EIRP in mW Pi= 3.1416 R= Measurement distance 2.3 REFERENCE GUIDANCE 447498 D01 General RF Exposure Guidance v06 2.4 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 2.5 MEASUREMENT UNCERTAINTY The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)). Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FA5D2601 Page : 6 of 8 Report Version: Rev. 01 2.6 MPE EVALUATION RESULTS Non-beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum Tune Up Limit (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 2412-2462 25.63 26.0 3.72 20 0.187 1 0.187 Pass 5180-5240 27.96 28.0 5.21 20 0.417 1 0.417 Pass 5260-5320 23.79 24.0 5.46 20 0.176 1 0.176 Pass 5500-5720 23.83 24.0 5.87 20 0.193 1 0.193 Pass 5745-5825 27.97 28.0 5.71 20 0.467 1 0.467 Pass 5925-6425 24.62 25.0 3.47 20 0.140 1 0.140 Pass 6425-6525 21.17 21.5 3.88 20 0.069 1 0.069 Pass 6525-6875 23.96 24.0 4.25 20 0.133 1 0.133 Pass 6875-7125 22.51 23.0 3.85 20 0.096 1 0.096 Pass Beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum Tune Up Limit (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 2412-2462 24.74 25.0 4.49 20 0.177 1 0.177 Pass 5180-5240 27.61 28.0 4.23 20 0.332 1 0.332 Pass 5260-5320 23.77 24.0 4.82 20 0.152 1 0.152 Pass 5500-5720 23.68 24.0 4.97 20 0.157 1 0.157 Pass 5745-5825 27.85 28.0 4.94 20 0.391 1 0.391 Pass 5925-6425 24.53 25.0 3.77 20 0.150 1 0.150 Pass 6425-6525 21.13 21.5 3.30 20 0.060 1 0.060 Pass 6525-6875 23.80 24.0 4.75 20 0.149 1 0.149 Pass 6875-7125 22.27 22.5 4.19 20 0.093 1 0.093 Pass Report No.: FA5D2601 Page : 7 of 8 Report Version: Rev. 01 2.7 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION Non-beamforming mode Mode Max Ratio of Each Mode 2.4 GHz Wi-Fi 0.187 5 GHz Wi-Fi 0.467 6 GHz Wi-Fi 0.140 Sum 0.794 Limit 1 Pass / Fail Pass Beamforming mode Mode Max Ratio of Each Mode 2.4 GHz Wi-Fi 0.177 5 GHz Wi-Fi 0.391 6 GHz Wi-Fi 0.150 Sum 0.718 Limit 1 Pass / Fail Pass Report No.: FA5D2601 Page : 8 of 8 Report Version: Rev. 01 3 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Cer…

Text truncated - open the document above for the full version.

Report No.: FR5D2601AN Page : 1 of 28 Report Version: Rev. 01 FCC Test Report FCC ID : HDC-17600087 Equipment : WiFi 7 2.5G Router Model No. : SDG-8732, SDG-8732v (Please refer to section 1.1.1 for more details) Brand Name : Adtran Applicant : Adtran Address : 901 Explorer Boulevard, Huntsville, Alabama, United States, 35806-2807 Standard : 47 CFR FCC Part 15.407 Received Date : Dec. 26, 2025 Tested Date : Jan. 05 ~ Mar. 03, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FR5D2601AN Page : 2 of 28 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List .............................................................................................................. 10 1.3 Test Setup Chart .................................................................................................................................. 10 1.4 The Equipment List .............................................................................................................................. 12 1.5 Test Standards ..................................................................................................................................... 13 1.6 Reference Guidance ............................................................................................................................ 13 1.7 Deviation from Test Standard and Measurement Procedure ............................................................... 13 1.8 Measurement Uncertainty .................................................................................................................... 14 2 TEST CONFIGURATION ..................................................................................................................... 15 2.1 Testing Facility ..................................................................................................................................... 15 2.2 The Worst Test Modes and Channel Details ....................................................................................... 16 3 TRANSMITTER TEST RESULTS ....................................................................................................... 18 3.1 Emission Bandwidth ............................................................................................................................. 18 3.2 Conducted Output Power ..................................................................................................................... 19 3.3 Power Spectral Density ........................................................................................................................ 21 3.4 Unwanted Emissions ............................................................................................................................ 23 3.5 Frequency Stability ............................................................................................................................... 26 3.6 AC Power Line Conducted Emissions ................................................................................................. 27 4 TEST LABORATORY INFORMATION ............................................................................................... 28 Appendix A. Emission Bandwidth Appendix B. Conducted Output Power Appendix C. Power Spectral Density Appendix D. Unwanted Emissions Appendix E. Frequency Stability Appendix F. AC Power Line Conducted Emissions Report No.: FR5D2601AN Page : 3 of 28 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR5D2601AN Rev. 01 Initial issue Mar. 25, 2026 Report No.: FR5D2601AN Page : 4 of 28 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 AC Power Line Conducted Emissions [dBuV]: 0.387MHz 39.40 (Margin -8.72dB) - AV Pass 15.407(b) 15.209 Unwanted Emissions [dBuV/m at 3m]: 5470.00MHz 67.96 (Margin -0.24dB) - PK Pass 15.407(a) Emission Bandwidth Meet the requirement of limit Pass 15.407(e) 6dB bandwidth Meet the requirement of limit Pass 15.407(a) Conducted Output Power Max Power [dBm]: Non-beamforming mode 5150~5250MHz: 27.96 5250~5350MHz: 23.79 5470~5725MHz: 23.83 5725~5850MHz: 27.97 Beamforming mode 5150~5250MHz: 27.61 5250~5350MHz: 23.77 5470~5725MHz: 23.68 5725~5850MHz: 27.85 Pass 15.407(a) Power Spectral Density Meet the requirement of limit Pass 15.407(g) Frequency Stability Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR5D2601AN Page : 5 of 28 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Product Details The following models are provided to this EUT. Brand Name Model Name Product Name Description Adtran SDG-8732 WiFi 7 2.5G Router w/o VoIP SDG-8732v with VoIP 1.1.2 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Freq. (MHz) Channel Number Transmit Chains (N TX ) Data Rate / MCS 5150-5250 525…

Text truncated - open the document above for the full version.

Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 84 of 92 Modulation be EHT80 Test Freq. (MHz) 5610 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 85 of 92 Modulation be EHT80 Test Freq. (MHz) 5690 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 86 of 92 Modulation be EHT80 Test Freq. (MHz) 5690 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 87 of 92 Modulation be EHT80 Test Freq. (MHz) 5775 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 88 of 92 Modulation be EHT80 Test Freq. (MHz) 5775 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 89 of 92 Unwanted Emissions (Above 1GHz) for be EHT160 Modulation be EHT160 Test Freq. (MHz) 5250 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 90 of 92 Modulation be EHT160 Test Freq. (MHz) 5250 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 91 of 92 Modulation be EHT160 Test Freq. (MHz) 5570 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 92 of 92 Modulation be EHT160 Test Freq. (MHz) 5570 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 1 of 66 Beamforming mode Unwanted Emissions (Below 1GHz) Modulation be EHT20 Test Freq. (MHz) 5745 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 2 of 66 Modulation be EHT20 Test Freq. (MHz) 5745 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 3 of 66 Unwanted Emissions (Above 1GHz) for be EHT20 Modulation be EHT20 Test Freq. (MHz) 5180 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 4 of 66 Modulation be EHT20 Test Freq. (MHz) 5180 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 5 of 66 Modulation be EHT20 Test Freq. (MHz) 5200 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 6 of 66 Modulation be EHT20 Test Freq. (MHz) 5200 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 7 of 66 Modulation be EHT20 Test Freq. (MHz) 5240 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Unwanted Emissions Appendix D.1 Report No.: FR5D2601AN Page No. : 8 of 66 Modulation be EHT20 Test Freq. (MHz) 5240 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV) + Factor* (dB/m) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dB…

Text truncated - open the document above for the full version.

Report No.: FZ5D2601 Page : 1 of 100 Report Version: Rev. 01 FCC DFS Test Report FCC ID : HDC-17600087 Equipment : WiFi 7 2.5G Router Model No. : SDG-8732, SDG-8732v (Please refer to section 1.1.1 for more details) Brand Name : Adtran Applicant : Adtran Addr…

Text truncated - open the document above for the full version.