HDC1700412E11NetVanta 150

NetVanta 150 Series Hardware Installation Guide 1700412E1NetVanta 150 61700412E1-34A July 2006 TrademarksNetVanta 150 Wireless Access Point ABG Hardware Installation Guide 2Copyright © 2006 ADTRAN, Inc.61700412E1-34A Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication. Software Licensing Agreement Each ADTRAN product contains a single license for ADTRAN supplied software. Pursuant to the Licensing Agreement, you may: (a) use the software on the purchased ADTRAN device only and (b) keep a copy of the software for backup purposes. This Agreement covers all software installed on the system as well as any software available on the ADTRAN website. In addition, certain ADTRAN systems may contain additional conditions for obtaining software upgrades. 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 Phone: (256) 963-8000 Copyright © 2006 ADTRAN, Inc. All Rights Reserved. Printed in U.S.A. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Conventions 61700412E1-34ACopyright © 2006 ADTRAN, Inc.3 Conventions Notes provide additional useful information. Cautions signify information that could prevent service interruption or damage to equipment. Warnings provide information that could prevent injury or endangerment to human life. Safety InstructionsNetVanta 150 Wireless Access Point ABG Hardware Installation Guide 4Copyright © 2006 ADTRAN, Inc.61700412E1-34A Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for special disposal instructions. 5. The socket-outlet shall be installed near the equipment and shall be easily accessible. Save These Important Safety Instructions NetVanta 150 Wireless Access Point ABG Hardware Installation Guide FCC-Required Information 61700412E1-34ACopyright © 2006 ADTRAN, Inc.5 FCC-Required Information FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of FCC rules and requirements adopted by ACTA. Each registered interface has a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company. 2. If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service. If possible, advance notification is given; otherwise, notification is given as soon as possible. The telephone company will advise the customer of the right to file a complaint with the FCC. 3. The telephone company may make changes in its facilities, equipment, operations, or procedures that could effect the proper operation of this equipment. Advance notification and the opportunity to maintain uninterrupted service are given. 4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. The telephone company may require this equipment to be disconnected from the network until the problem is corrected or it is certain the equipment is not malfunctioning. 5. This unit contains no user-serviceable parts. 6. This equipment is designed to connect to the telephone network or premises wiring using an FCC-compatible modular jack, which is compliant with Part 68 and requirements adopted by ACTA. FCC Radio Frequency Interference StatementNetVanta 150 Wireless Access Point ABG Hardware 6Copyright © 2006 ADTRAN, Inc.61700412E1-34A FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NetVanta 150 Wireless Access Point ABG Hardware Installation Guide FCC Compliance Notice: Radio 61700412E1-34ACopyright © 2006 ADTRAN, Inc.7 FCC Compliance Notice: Radio Frequency Notice This device complies with part 15 of the FCC Rules. Operation is subject to the follow…

Text truncated - open the document above for the full version.

Corporate Office 901 Explorer Blvd. Huntsville, AL 35806 U.S. Mail P.O. Box 140000 Huntsville, AL 35814- 4000 Toll Free: 1 800 9ADTRAN Telephone: 256.963.8000 http://www.adtran.com Date: February 16, 2007 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; Corporate Office 901 Explorer Blvd. Huntsville, AL 35806 U.S. Mail P.O. Box 140000 Huntsville, AL 35814- 4000 Toll Free: 1 800 9ADTRAN Telephone: 256.963.8000 http://www.adtran.com f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, ________________________ Name: Jeffrey W. Whitmire Title: Manager Regulatory Compliance

Corporate Office 901 Explorer Blvd. Huntsville, AL 35806 U.S. Mail P.O. Box 140000 Huntsville, AL 35814-4000 Toll Free: 1 800 9ADTRAN Telephone: 256.963.8000 http://www.adtran.com Date: February 16, 2007 Federal Communications Commission Authorization and Evaluation Division FCC ID: HDC1700412E11 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Schematics 2. Operational Description 3. Block diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, ________________________ Name: Jeffrey W. Whitmire Title: Manager, Regulatory Compliance

1 Subject: FW: RE: ADTRAN, FCC ID: HDC1700412E11, Assessment NO.: AN07T6809 and AN07T6810 Notice #1 1700412E1 User Manual Revised ... 1700412E1 Test set up photos f... 1700412E1 Test Report for UNII... From: gina.lo [mailto:[email protected]]On Behalf Of application Sent: Tuesday, May 15, 2007 2:54 AM To: Mike Kuo Cc: Helen Zhao Subject: Re:RE: ADTRAN, FCC ID: HDC1700412E11, Assessment NO.: AN07T6809 and AN07T6810 Notice #1 Dear Mike, Please see my reply. Thank You. Best Regards, Gina From: Mike Kuo Sent: Monday, May 14, 2007 11:27 AM To: 'application' Cc: shirley.kang Subject: FW: ADTRAN, FCC ID: HDC1700412E11, Assessment NO.: AN07T6809 and and AN07T6810 Notice #1 Question #1: Based upon page 18 of user manual, this device is capable of tuning in 2300-2500 MHz and 4900-5850 MHz band. Please address the following concerns: A. This device was tested with 11 channels of operation from 2412-2462 MHz. Please explain how the manufacturer is going to ensure that only 11 channel operation will be used in the U.S. Ans: Please see the revised user manual. B. In 4900 - 5850 MHz band, this device was tested with 3 channels operation from 5180 - 5220 MHz. Based upon the chipset specification, the radio chip set is capable of operating in entrie 4900 - 5850 MHz band, please explain how the device will be limited to transmit in 5180 - 5220 MHz only. Ans: Please see the revised user manual. 2 C. Page 5 of UNII repor listed four channels ( 5180 - 5240 MHz ) but the highest channel tested in 5220 MHz. Please explain. Ans: Please see the revised UNII report. D. Page 26 of user manual mentioned the operation in 5470-5725 MHz band which is outside of frquency band invesitgated. Please explain. Ans: Please see the revised user manual. Best Regards Mike Kuo The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 1 Total Page: 9 Rev. 00 EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 2 Rev. 00 Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 3 Rev. 00 Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 4 Rev.00

        
 

   !" # $%%&&  ' ( ! ) !*! % !+    +!& 
'#"$!&&  
* !  ,
 (* (

 ,' !(  ('-+ #&&   .

 


,
 # - *' -  

 
( & -
 (
 /
 ( !  '$ 0    1  (( 2 " 3 4  
  ! "  (

*  
  - 
 *!2 &! ! #   !" IC : 2250A-17004121 FCC ID : HDC1700412E11 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 5 Rev.00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 6 Rev.00 Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 7 Rev.00 Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 8 Rev.00 Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206 Date of Issue: May 3, 2007 Page 9 Rev.00

Specification 1. Electrical Properties : 1.1 Frequency Range............ 1.2 Impedance .................. 1.3 VSWR ..................... ... 1.4 Return Loss.................. 1.5 Radiation ..................... 1.6 Gain(peak)................... 2.4GHz ~ 2.5GHz @ 2dBi 4.9GHz @1dBi 5.15GHz ~ 5.825GHz @ 3dBi 1.7 Polarization............... ...Linear Vertical 1.8 Admitted Power............ 1W 2. Physical Properties : 2.1 Cable...........................RG-178 Coaxial Cable 2.2 Antenna Cover............ ...TPE 2.3 Antenna Base............... PC 2.4 Antenna Base............... PBT 2.5 Operating Temp. ......... ...-20 ~ +65 2.6 Storage Temp. ............ ...-30 ~ +75 2.7 Color ........................ .Black 2.8 Connector.................. ...SMA Plug Reverse RF Antenna Cable Assembly Dipole-directional 2.4GHz ~ 2.5GHz 4.9GHz ~ 5.825GHz 50Ω Nominal 1.92 Max. -10 dB Maximum 1 2 RF Antenna Assembly P/NO : C147-510243-A SPEC : Dual Band 5/8/2006 3 4 5 6 7 8 9 10

Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 9, 2007 Page 1 Total Page: 6 Rev. 00 APPENDIX II RADIO FREQUENCY EXPOSURE LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. EUT Specification EUT NetVanta 150 Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power IEEE 802.11b Base mode: 22.07 dBm (161.06 mW) IEEE 802.11g Base mode: 21.87 dBm (153.82 mW) IEEE 802.11g Turbo mode: 19.96 dBm (99.08 mW) Antenna gain (Max) 2 dBi (Numeric gain: 1.58) Evaluation applied MPE Evaluation SAR Evaluation N/A Remark: 1. The maximum output power is 22.07dBm (161.06mW) at 2437MHz (with 1.58 numeric antenna gain.) 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance. 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger. TEST RESULTS No non-compliance noted. Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 9, 2007 Page 2 Rev. 00 Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure EUT output power = 161.06mW Numeric Antenna gain = 1.58 Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Æ Power density = 0.0506 mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.) Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 9, 2007 Page 3 Rev. 00 EUT Specification EUT NetVanta 150 Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power IEEE 802.11a Base mode: 17.45 dBm (55.59 mW) IEEE 802.11a Turbo mode: 17.54 dBm (56.75 mW) Antenna gain (Max) 3 dBi (Numeric gain: 2.00) Evaluation applied MPE Evaluation SAR Evaluation N/A Remark: 1. The maximum output power is 17.54dBm (56.75 mW) at 5760 MHz (with 2.00 numeric antenna gain.) 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance. 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger. TEST RESULTS No non-compliance noted. Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 9, 2007 Page 4 Rev. 00 Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure EUT output power = 56.75mW Numeric Antenna gain = 2.00 Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Æ Power density = 0.0226 mW / cm2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.) Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 9, 2007 Page 5 Rev. 00 LIMIT According to §15.407(f), U-NII devices are subject to the radio frequency radiation exposure requirements specified in §§ 1.1307(b), 2.1091 and 2.1093 of this chapter, as appropriate. All equipment shall be considered to operate in a "general population/uncontrolled" environment. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement m…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 3, 2007 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 89 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For NetVanta 150 Model: 1700412E1 Trade Name: ADTRAN Issued to ADTRAN 901 Explorer Blvd. Huntsville Alabama 35806 U.S.A. Issued by Compliance Certification Services Inc. No. 81-1, Lane 210, Bade Rd. 2, Luchu Hsiang, Taoyuan Hsien, (338) Taiwan, R.O.C. http://www.ccsemc.com.tw [email protected] Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 3, 2007 Page 2 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION........................................................................................................3 2. EUT DESCRIPTION..............................................................................................................................4 3. TEST METHODOLOGY.......................................................................................................................5 3.1 EUT CONFIGURATION........................................................................................................................5 3.2 EUT EXERCISE....................................................................................................................................5 3.3 GENERAL TEST PROCEDURES.............................................................................................................5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS........................................................6 3.5 DESCRIPTION OF TEST MODES...........................................................................................................7 4. INSTRUMENT CALIBRATION...........................................................................................................8 4.1 MEASURING INSTRUMENT CALIBRATION......................................................................................8 4.2 MEASUREMENT EQUIPMENT USED.........................................................................................8 5. FACILITIES AND ACCREDITATIONS ..............................................................................................9 5.1 FACILITIES .........................................................................................................................................9 5.2 EQUIPMENT........................................................................................................................................9 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.....................................................................................10 6. SETUP OF EQUIPMENT UNDER TEST...........................................................................................11 6.1 SETUP CONFIGURATION OF EUT.......................................................................................................11 6.2 SUPPORT EQUIPMENT ...............................................................................................................11 7. FCC PART 15.247 REQUIREMENTS................................................................................................12 7.1 6 DB BANDWIDTH.............................................................................................................................12 7.2 PEAK POWER....................................................................................................................................20 7.3 A VERAGE POWER............................................................................................................................28 7.4 BAND EDGES MEASUREMENT ................................................................................................36 7.5 PEAK POWER SPECTRAL DENSITY....................................................................................................49 7.6 SPURIOUS EMISSIONS ................................................................................................................57 7.7 POWERLINE CONDUCTED EMISSIONS...............................................................................................80 APPENDIX I RADIO FREQUENCY EXPOSURE ...................................................................................83 APPENDIX II PHOTOGRAPHS OF TEST SETUP ..................................................................................87 Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 3, 2007 Page 3 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: ADTRAN 901 Explorer Blvd. Huntsville Alabama 35806 U.S.A. Equipment Under Test: NetVanta 150 Trade Name: ADTRAN Model: 1700412E1 Date of Test: August 5, 2006 ~ February 13, 2007 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by: Reviewed by: Johnny Liu Amanda Wu Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date …

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 3, 2007 Page 87 Rev. 00 APPENDIX II PHOTOGRAPHS OF TEST SETUP Conducted Emission Setup Photos Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 3, 2007 Page 88 Rev. 00 Radiated Emission Setup Photos Compliance Certification Services Inc. Reference No.: 60630205 Report No.: 70502206-RP1 FCC ID: HDC1700412E11 Date of Issue: May 3, 2007 Page 89 Rev. 00 Powerline Conducted Emissions Setup Photos