HDWAEA307Rugged Handheld PC with dual band CDMA modem

_MAN40-A (CMU040-A3f) Headquarters: 955 Rue FernandDufour Vanier, Quebec Canada G1M 3B2 Tel.: (418) 681-9394 Fax: (418) 681-0799 www.daptech.com U.S.A. subsidiary: 14502 N. Dale Mabry Suite 227 Tampa, FL 33618-2072 Tel.: (813) 969-3271 Fax: (813) 969-3334 European subsidiary: 6 Place du Village des Barbanniers 92632Gennevilliers Cedex France Tel.: (33) 1-41 21 95 95 Fax: (33) 1-41 21 95 65 CE8000 & CE8000LS USER'S GUIDE _MAN40-A (CMU040-A3) _MAN40-A (CMU040-A3) 1 _MAN40-A (CMU040-A3) TABLE OF CONTENTS TABLE OF CONTENTS.........................................................................................................................................................1 A WORD FROM DAP TECHNOLOGIES...........................................................................................................................3 PRECAUTIONS......................................................................................................................................................................7 WARRANTY STATEMENTS..............................................................................................................................................9 CE CONFORMITY CE8000..................................................................................................................................................10 CE CONFORMITY CE8000LS.............................................................................................................................................11 FCC, AS/NZA STATEMENT & COPYRIGHT POLICY................................................................................................12 MICROSOFT'S END USER LICENSE AGREEMENT......................................................................................................13 GET STARTED.....................................................................................................................................................................19 Recharging The Battery................................................................................................................................................ 19 Automatic Shutoff........................................................................................................................................................... 21 Turning The Unit ON..................................................................................................................................................... 21 Turning The Unit OFF Manually................................................................................................................................22 Battery Status Indicator................................................................................................................................................ 22 Touch Screen Calibration............................................................................................................................................ 23 Starting Display............................................................................................................................................................. 23 Use of the Touch Screen................................................................................................................................................ 24 Caring of the Touch Screen.......................................................................................................................................... 24 Loading files and programs......................................................................................................................................... 25 ADVANCED BATTERY OPTIONS...................................................................................................................................27 Battery Power Management......................................................................................................................................... 27 Low Battery messages on Main Battery..................................................................................................................... 28 Low battery messages on Backup Battery................................................................................................................. 29 Replacing the main battery.......................................................................................................................................... 30 Recycling the battery..................................................................................................................................................... 31 Power Gauge Calibration with BatMngr.exe........................................................................................................... 32 BATMNGR Typical Values........................................................................................................................................... 33 USE OF THE KEYBOARD..................................................................................................................................................35 USE OF PC CARDS..............................................................................................................................................................39 I RDA INTERFACE...............................................................................................................................................................41 BARCODE LASER SCANNER (CE8000LS)......................................................................................................................43 Maintenance Notice...................................................................................................................................................... 44 USE OF THE CRADLE.........................................................................................................................................................45 EXTERNAL COMPACT …

Text truncated - open the document above for the full version.

CMU044-A11 of 2 SIERRA WIRELESS AIRCARD 555 WIRELESS CARD INSTALLATION FCC RF EXPOSURE INFORMATION In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this device complies with the FCC guidelines and these international standards. ** WARNING ** This device is approved for use only with the Sierra Wireless AirCard 555 transmitter. This device has been tested and complies with the FCC RF exposure guidelines. Modifications not approved by the manufacturer may result in violation of FCC regulations and may void the Users authority to operate the equipment. PC Card slots will not operate until a Sierra Wireless AirCard 555 transmitter is inserted No other model of transmitter will activate the PC Card slots Use only the supplied or an approved antenna. See below for detail. Unauthorised antennas, modifications, or attachments could impair call quality, damage the phone, and will result in violation of FCC regulations and will void the FCC ID. When equipped with the Sierra Wireless AirCard 555, this product can only be used in Canada and USA. This device has not been tested to comply with any other international standards bodies The FCC ID shown on the CE8640 unit applies only when the Sierra Wireless AirCard 555 is installed. For more information about RF exposure, please visit the FCC web site at www.fcc.gov For more information about the product certification, please contact [email protected] CMU044-A12 of 2 Installation of the Card A software driver needs to be installed to activate the card. ** The driver needs to be installed before the card is inserted Contact your software integrator or Dap Technologies Technical Support for more information. For more information refer to the CE8640 Technical Guide at https://www.daptech.com You also need an account with a wireless provider. To install the card: • Open the Expansion Bay as specified in previous section “Use of PC Card”. • Slide the AirCard 555 into either of the 2 slots • Insert the antenna cable into the PC Card connector • Install the antenna by screwing it on the antenna connector. Do not over-tight Replacement antenna Be sure to replace the antenna with the appropriate one. Dap Technologies Part Number DCCE811

Celltech Labs Inc. 1955 Moss Court, Kelowna, B.C. Canada V1Y 9L3 Tel. 250-448-7047 • Fax. 250-448-7046 • e-mail: [email protected] www.celltechlabs.com July 31, 2003 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue, Suite C110 McLean, VA 22101 SUBJECT: DAP Technologies Ltd. FCC ID: HDWAEA307 On behalf of DAP Technologies Ltd. is our response to your comment regarding the subject application as follows: 1. Attached is the re-measured block edge plots with the settings issued by the FCC OET Commission. 2. Sierra Wireless Air Card 555 information is only for FCC ID: HDWAEA307. 3. The submitted test report states in the Measurement Summary that if the SAR measurements performed at the middle channel were ≥ 3dB below the SAR limit, SAR evaluation for the low and high channels was optional for each test configuration (per FCC OET Bulletin 65, Supplement C, Edition 01-01). If you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Senior Compliance Engineering Technologist Celltech Labs Inc. cc: DAP Technologies Ltd.

-----Original Message----- From: Martin Perrine [mailto:[email protected]] Sent: 9 juillet, 2003 16:59 To: Tim Harrington; Boisvert, Eric Subject: Re: FW: re[2]: Picture of the CE8640 with antenna Dear Eric, I see no problem with your proposal as long as you meet all conditions of our second proposal. A new FCCID and label are required. Best Regards Martin Perrine >>> Boisvert, Eric 07/09/03 04:48PM >>> Hello gentlemen, I would appreciate a quick response since I am leaving on vacations for the next 2 weeks. I would like to get the information from FCC and this way being able to give directions to the project team before I leave. Thank you for your time Éric Boisvert Gestionnaire de projets DAP Technologies Tél: 418-681-7835 #395 e-mail: [email protected] -----Original Message----- From: Boisvert, Eric Sent: 8 juillet, 2003 12:57 To: 'Martin Perrine'; Tim Harrington Cc: [email protected] Subject: RE: re[2]: Picture of the CE8640 with antenna Good afternoon gentlemen, We have discussed the possibility of using the original Sierra wireless grant by adding our computer/antenna as a specific host with Sierra Wireless, and they were not too willing to go this way. So we will pursue with option #2, which is to get our own FCC ID. Now, the concern was about the way that we want to market the product. As you know, we want to sell a "wireless ready" product and have customers to buy their PCMCIA cards (SW Aircard 750 for GPRS and SW Aircard 555 for CDMA) from their service providers and install it in the unit (PCMCIA slot). Now, the principal issue was that customers could buy other cards (not the ones that we certified) and use them with our unit. Here is how we want to address this issue in order to have complete control on the situation: When a unit is sold with PCMCIA wireless option, GPRS for example, a SW Aircard 750 needs to be detected in one of the two PCMCIA slots in order to enable BOTH PCMCIA slots. This means that if a SW Aircard 750 is not detected, than BOTH PCMCIA slots will be disabled (locked by software). The same for CDMA option with SW Aircard 555. This way, the wireless option cannot be used. This will assure us that only the cards that we certified can be used to have our product to use wireless option. I would like you to confirm that this way, everything would be ok from FCC point of view. Thank you Éric Boisvert Gestionnaire de projets DAP Technologies Tél: 418-681-7835 #395 e-mail: [email protected] -----Original Message----- From: Martin Perrine [ mailto:[email protected]] Sent: 1 juillet, 2003 16:24 To: Bergeron, Sylvain Cc: Tim Harrington; Boisvert, Eric; [email protected] Subject: Re: re[2]: Picture of the CE8640 with antenna Dear Sylvain Based on the photographs provided this device appears to fall under "portable" RF exposure conditions. As such use of the "mobile" condition under the Sierra Wireless grant is not appropriate. The apparent options are: 1) Use of the original Sierra wireless grant by adding your computer/antenna as a specific host. Requires permissive II change by Sierra. 2) Obtain your own FCC ID for use in the specific host computer. This is the avenue that you seemed to be pursuing, however, the original Sierra FCC ID label would have to be removed from the card. I trust this guidance is helpful. Martin Perrine

Celltech Labs Inc. 1955 Moss Court, Kelowna, B.C. Canada V1Y 9L3 Tel. 250-448-7047 • Fax. 250-448-7046 • e-mail: [email protected] www.celltechlabs.com July 21, 2003 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue, Suite C110 McLean, VA 22101 SUBJECT: DAP Technologies Ltd. FCC ID: HDWAEA307 Part 24(E) & 22.901(d) - Certification On behalf of DAP Technologies Ltd. is an application for Part 24(E) & 22.901(d) Certification of Rugged Handheld PC Model: CE8640/LS with internal dual-band PCS/Cellular CDMA Modem Model: AirCard 555 manufactured by Sierra Wireless Inc. (FCC ID: N7NACRD555, originally granted September 25, 2001). Model: CE8640/LS Equipment Class: PCS Licensed Transmitter (PCB) Equipment Type: Rugged Handheld PC with Dual-Band PCS/Cellular CDMA Modem Emission Designator: 1M25F9W Tx Frequency Range: 1851.25 - 1908.75 MHz (PCS CDMA) 824.70 - 848.31 MHz (Cellular CDMA) Conducted Power Tested: 23.0 dBm (PCS CDMA) 23.0 dBm (Cellular CDMA) Max. RF Output Power: 0.105 Watts EIRP (PCS CDMA) 0.224 Watts ERP (Cellular CDMA) Max. SAR Measured: 0.271 W/kg (PCS CDMA) / 0.379 W/kg (Cellular CDMA) Antenna Type: Unity Gain Attached is the confidentiality request letter, Part 24(E) & 22.901(d) EMC measurement report data and photographs, RF exposure SAR measurement report data & photographs, FCC ID label and location, internal and external device photographs, block diagram(s) (confidential), schematic diagram(s) (confidential), operational description (confidential), parts list (confidential), tune-up procedure (confidential), and the user's manual with RF exposure warning statement. If you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Jonathan Hughes General Manager Celltech Labs Inc. cc: DAP Technologies Ltd.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 July 30, 2003 RE: DAP Technologies FCC ID: HDWAEA307 I have a few comments on this Application. 1.) The new Block Edge requirements do not appear to meet the expectations of the Commission. Please view the attached guidance issued directly by the OET Laboratory in Columbia, MD. 2.) Excuse my confusion, but will this equipment be equipped with both the Sierra 555 and 750 radio modems? Or is one an option? I have in my possession information supplied by Sierra on both wireless products. 3.) Please provide written rationale for performing SAR test on only one channel in the 800MHz AMPS band and one channel in the 1900 MHz PCS band. William H. Graff President and Examining Engineer mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

© 2003 Celltech Labs Inc. DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card TRSN: 042503-369/370HDW EXTERNAL EUT PHOTOGRAPHS © 2003 Celltech Labs Inc. DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card TRSN: 042503-369/370HDW EXTERNAL EUT PHOTOGRAPHS

© 2003 Celltech Labs Inc DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 Rugged Handheld PC with PCS/Cellular CDMA Modem Card TRSN: 042503-369/370HDW FCC ID LABEL & LOCATION LABELING REQUIREMENTS PER §2.925 The label shall be permanently affixed at a conspicuous location on the device. SEE NEXT PAGE(S) FOR PART 15(B) DoC LABEL SEE NEXT PAGE(S) FOR PART 24(E) LABEL CDMA AIRCARD 555 FCC ID :HDWAEA307 IC :4609A-AEA307 MODEL :CE8640/LS FCC Part 15 DoC Label

© 2003 Celltech Labs Inc.DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card TRSN: 042503-369/370HDW INTERNAL EUT PHOTOGRAPHS © 2003 Celltech Labs Inc.DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card TRSN: 042503-369/370HDW INTERNAL EUT PHOTOGRAPHS © 2003 Celltech Labs Inc.DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card TRSN: 042503-369/370HDW INTERNAL EUT PHOTOGRAPHS 08/03/2001 file://H:\Rosetta\docs\Re g ulator y %20A pp rovals\FCC\Part%2024\ p hotos\Ima g e001-2.JPG INTERNAL EUT PHOTOGRAPHS 08/03/2001 file://H:\Rosetta\docs\Re g ulator y %20A pp rovals\FCC\Part%2024\ p hotos\Ima g e004-4. jpg INTERNAL EUT PHOTOGRAPHS 08/03/2001 file://H:\Rosetta\docs\Re g ulator y %20A pp rovals\FCC\Part%2024\ p hotos\Ima g e006-6. jpg INTERNAL EUT PHOTOGRAPHS 08/03/2001 file://H:\Rosetta\docs\Re g ulator y %20A pp rovals\FCC\Part%2024\ p hotos\Ima g e010. jpg INTERNAL EUT PHOTOGRAPHS

© 2003 Celltech Labs Inc. 1 of 23 Test Report S/N: 042503-370HDW Test Date(s): May 07, 2003 Test Type: FCC/IC SAR Evaluation Celltech Labs Inc. declares under its sole responsibility that this device was found to be in compliance with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 and Health Canada’s Safety Code 6. The device was tested in accordance with the measurement standards and procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01) and Industry Canada RSS-102 Issue 1 (Provisional) for the General Population / Uncontrolled Exposure environment. All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. The results and statements contained in this report pertain only to the device(s) evaluated. Russell Pipe Senior Compliance Technologist Celltech Labs Inc. DECLARATION OF COMPLIANCE SAR EVALUATION Test Lab CELLTECH LABS INC. Testing and Engineering Services 1955 Moss Court Kelowna, B.C. Canada V1Y 9L3 Phone: 250-448-7047 Fax: 250-448-7046 e-mail: [email protected] web site: www.celltechlabs.com Applicant Information DAP TECHNOLOGIES LTD. 955 Place DuFour Vanier, Quebec G1M 3B2 Canada Rule Part(s): FCC 47 CFR §2.1093; IC RSS-102 Issue 1 (Provisional) Test Procedure(s): FCC OET Bulletin 65, Supplement C (Edition 01-01) FCC Device Classification: PCS Licensed Transmitter (PCB) IC Device Classification: 2GHz Personal Communication Services (RSS-133 Issue 2) 800MHz CDMA Cellular Transmitter (RSS-129 Issue 2) FCC ID: HDWAEA307 IC Certification No.: 4609A-AEA307 Model(s): CE8640/LS Device Type: Rugged Handheld PC with Sierra Wireless AirCard 555/550 Dual-Band PCS/Cellular CDMA PCMCIA Modem Card Tx Frequency Range: 1851.25 - 1908.75 MHz (PCS CDMA) 824.70 - 848.31 MHz (Cellular CDMA) Max. RF Output Power Tested: 23.0 dBm Conducted (PCS CDMA) 23.0 dBm Conducted (Cellular CDMA) Battery Type: 7.4V Lithium-ion, 2000mAh Antenna Type: Unity Gain Max. SAR Measured: 0.271 W/kg (PCS CDMA) / 0.379 W/kg (Cellular CDMA) © 2003 Celltech Labs Inc. 2 of 23 Test Report S/N: 042503-370HDW Test Date(s): May 07, 2003 Test Type: FCC/IC SAR Evaluation TABLE OF CONTENTS 1.0INTRODUCTION......................................................................3 2.0DESCRIPTION OF EUT............................................................. 3 3.0SAR MEASUREMENT SYSTEM ................................................ 4 4.0MEASUREMENT SUMMARY...................................................... 5-6 5.0DETAILS OF SAR EVALUATION............................................... 7 6.0EVALUATION PROCEDURES.................................................... 7-8 7.0SYSTEM PERFORMANCE CHECK............................................. 9 8.0EQUIVALENT TISSUES............................................................ 10 9.0SAR LIMITS........................................................................... 10 10.0SYSTEM SPECIFICATIONS....................................................... 11 11.0PROBE SPECIFICATION.......................................................... 12 12.0SAM PHANTOM....................................................................... 12 13.0DEVICE HOLDER..................................................................... 12 14.0TEST EQUIPMENT LIST............................................................ 13 15.0MEASUREMENT UNCERTAINTIES............................................. 14-15 16.0REFERENCES........................................................................16 APPENDIX A - SAR MEASUREMENT DATA............................................... 17 APPENDIX B - SYSTEM PERFORMANCE CHECK DATA............................. 18 APPENDIX C - SYSTEM VALIDATION....................................................... 19 APPENDIX D - PROBE CALIBRATION...................................................... 20 APPENDIX E - MEASURED FLUID DIELECTRIC PARAMETERS.................. 21 APPENDIX F - SAM PHANTOM CERTIFICATE OF CONFORMITY................. 22 APPENDIX G - SAR TEST SETUP PHOTOGRAPHS.................................... 23 © 2003 Celltech Labs Inc. DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) 3 of 23 Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card Test Report S/N: 042503-370HDW Test Date(s): May 07, 2003 Test Type: FCC/IC SAR Evaluation This SAR (Specific Absorption Rate) measurement report demonstrates that the DAP Technologies Ltd. Model: CE8640/LS Rugged Handheld PC FCC ID: HDWAEA307 with internal Sierra Wireless AirCard 555/550 Dual-Band PCS/Cellular CDMA PCMCIA Modem Card complies with the RF exposure requirements specified in FCC 47 CFR §2.1093 (see reference [1]), and Health Canada’s Safety Code 6 (see reference [2]) for the General Population environment. The test procedures described in FCC OET Bulletin 65, Supplement C, Edition 01-01 (see reference [3]), and IC RSS-102 Issue 1 (Provisional) (see reference [4]), were employed. A description of the product, operating configuration, detailed summary of the test results, methodology and procedures used in the evaluation, equipment used, and the various provisions of the rules are included within this test report. FCC Rule Part(s) 47 CFR §2.1093 IC Rule Part(s) RSS-102 Issue 1 (Provisional) Test Procedure(s) FCC OET Bulletin 65, Supplement C (01-01) FCC Device Classification PCS Licensed Transmitter (PCB) IC Device Classification 2GHz Personal Communication Services (RSS-133 Issue 2) 800MHz CDMA Cellular Transmitter (RSS-129 Issue 2) Device Type Rugged Handheld PC with Sierra Wireless AirCard 555/550 Dual-Ban…

Text truncated - open the document above for the full version.

© 2003 Celltech Labs Inc. 1 of 17 Test Report S/N: 042503-369HDW Test Date(s): May 14-16, 2003 Test Type: FCC Part 22/24 EMC Measurements This wireless portable device has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in FCC 47 CFR §24(E), §22.901(d), §2, and ANSI TIA/EIA-603-A-2001. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. The results and statements contained in this report pertain only to the device(s) evaluated. Russell Pipe Senior Compliance Technologist Celltech Labs Inc. DECLARATION OF COMPLIANCE FCC PART 24(E) & 22.901(d) EMC MEASUREMENTS Test Lab CELLTECH LABS INC. Testing and Engineering Services 1955 Moss Court Kelowna, B.C. Canada V1Y 9L3 Phone: 250-448-7047 Fax: 250-448-7046 e-mail: [email protected] web site: www.celltechlabs.com Applicant Information DAP TECHNOLOGIES LTD. 955 Place DuFour Vanier, Quebec G1M 3B2 Canada FCC Rule Part(s): 47 CFR §24(E), §22.901(d), §2 IC Rule Part(s): RSS-133 Issue 2, RSS-129 Issue 2 Test Procedure(s): FCC 47 CFR §24(E), §22.901(d), §2; ANSI TIA/EIA-603-A-2001 FCC Device Classification: PCS Licensed Transmitter (PCB) IC Device Classification: 2GHz Personal Communication Services (RSS-133 Issue 2) 800MHz CDMA Cellular Transmitter (RSS-129 Issue 2) Device Type: Rugged Handheld PC with Sierra Wireless AirCard 555/550 Dual-Band PCS/Cellular CDMA PCMCIA Modem Card FCC ID: HDWAEA307 IC ID: 4609A-AEA307 Model(s): CE8640/LS Tx Frequency Range: 1851.25 - 1908.75 MHz (PCS CDMA) 824.70 - 848.31 MHz (Cellular CDMA) Max. RF Output Power: 0.105 Watts EIRP (PCS CDMA) 0.224 Watts ERP (Cellular CDMA) Max. Conducted Pwr. Tested: 23.0 dBm (PCS CDMA) 23.0 dBm (Cellular CDMA) Emission Designator(s): 1M25F9W Frequency Tolerance(s): 150 Hz (PCS CDMA) 300 Hz (Cellular CDMA) Antenna Type: Unity Gain Battery Type: 7.4V Lithium-ion, 2000mAh © 2003 Celltech Labs Inc. 2 of 17 Test Report S/N: 042503-369HDW Test Date(s): May 14-16, 2003 Test Type: FCC Part 22/24 EMC Measurements TABLE OF CONTENTS 1.1 SCOPE 3 2.1 GENERAL INFORMATION - §2.1033(a) 3 MEASUREMENT PROCEDURES & DATA 4-13 3.1 RF Output Power - §2.1046 4 4.1 Spurious Emissions at Antenna Terminal - §2.1051 4 5.1 Emission Designator - §2.202 4 6.1 Occupied Bandwidth - §2.1049, §22.917, §24.238 5 7.1 Effective Isotropic Radiated Power Output - §24.232(b) 6 8.1 Effective Radiated Power Output - §22.913 7 9.1 Field Strength of Spurious Radiation - §2.1053 8-11 10.1 Radiated Measurement Test Setup 11 11.1 Frequency Stability / Temperature Variation - §2.1055, §24.235 12-13 12.1 LIST OF TEST EQUIPMENT 14 13.1 CONCLUSION 15 APPENDIX A - TEST PLOTS 16 APPENDIX B - RADIATED TEST SETUP PHOTOGRAPHS 17 © 2003 Celltech Labs Inc. DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) 3 of 17 Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card Test Report S/N: 042503-369HDW Test Date(s): May 14-16, 2003 Test Type: FCC Part 22/24 EMC Measurements APPLICANT DAP TECHNOLOGIES LTD. 955 Place DuFour Vanier, Quebec G1M 3B2 Canada FCC PARTS 24(E) & 22.901(d) EMC MEASUREMENT REPORT 1.1 SCOPE 2.1 GENERAL INFORMATION - §2.1033(a) Measurement and determination of electromagnetic emissions (EME) from radio frequency devices for compliance with the technical rules and regulations of the Federal Communications Commission and Industry Canada. FCC ID HDWAEA307 Model(s) CE8640/LS Serial No. Pre-production unit EUT Type Rugged Handheld PC with Sierra Wireless AirCard 555/550 Dual-Band PCS/Cellular CDMA PCMCIA Modem Card Rule Part(s) FCC 47 CFR §24(E), §22.901(d), §2 IC RSS-133 Issue 2, RSS-129 Issue 2 FCC Classification PCS Licensed Transmitter (PCB) IC Classification 2GHz Personal Communication Services (RSS-133 Issue 2) 800MHz CDMA Cellular Transmitter (RSS-129 Issue 2) Tx Frequency Range 1851.25 - 1908.75 MHz (PCS CDMA) 824.70 - 848.31 MHz (Cellular CDMA) Max. RF Output Power 0.105 Watts EIRP (PCS CDMA) 0.224 Watts ERP (Cellular CDMA) Max. RF Conducted Output Power Tested 23.0 dBm (PCS CDMA) 23.0 dBm (Cellular CDMA) Emission Designator 1M25F9W Frequency Tolerance 150 Hz (PCS CDMA) 300 Hz (Cellular CDMA) Battery Type(s) 7.4V Lithium-ion, 2000mAh Antenna Type Unity Gain (Length: 101 mm) © 2003 Celltech Labs Inc. DAP TECHNOLOGIES LTD. FCC ID: HDWAEA307 (Model: CE8640/LS) 4 of 17 Rugged Handheld PC with PCS/Cellular CDMA PCMCIA Modem Card Test Report S/N: 042503-369HDW Test Date(s): May 14-16, 2003 Test Type: FCC Part 22/24 EMC Measurements 3.1 RF OUTPUT POWER MEASUREMENT -§2.1046 4.1 SPURIOUS EMISSIONS AT ANTENNA TERMINAL -§2.1051 MEASUREMENT PROCEDURES & DATA 5.1 EMISSION DESIGNATOR - §2.202 The peak conducted power levels were measured with a Gigatronics 8650A Universal Power Meter using modulated average power mode. An offset was entered into the power meter to correct for the losses of the attenuator and cable installed before the sensor input. The transmitter terminal was coupled to the power meter and the EUT was placed into test mode via internal software. All subsequent tests were performed using the same tune-up procedures. The EUT was placed in test mode via internal software in the “always up” power control mode. An offset was entered into the power meter to correct for all losses of the attenuator and cable installed befo…

Text truncated - open the document above for the full version.