HFS-CL1BLAPTOP COMPUTER

Regulatory Information FCC Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4 44 4RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The highest SAR value for the device as reported to the FCC is 1.2 W/kg when placed next to the body. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: HFS-CL1B. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical laptop operations with the device contacted directly to the human body to the back side of the notebook computer. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitting antenna during transmitting.

Quanta Computer Inc 188 Wen Hwa 2nd Rd., Kuei Shan Hsiang, Tao Yuan Hsien 333, Taiwan Tel: 886 3 3272345 ; Fax: 886 943 180597 Date: January 19, 2010 Statement We, Quanta Computer Inc, states that our device, FCC ID: HFS-CL1B, has no space to put the label except the battery compartment of this device. The label will put under the battery compartment and it is visible to the users as they purchase the products and install the battery. Sincerely yours, _______________ Joyce Kuo

Quanta Computer Inc 188 Wen Hwa 2nd Rd., Kuei Shan Hsiang, Tao Yuan Hsien 333, Taiwan Tel: 886 3 3272345 ; Fax: 886 943 180597 Date: January 19, 2010 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: HFS-CL1B To Whom It May Concern: We, Quanta Computer Inc, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely yours, Joyce Kuo

Rev. 1/1/03 Quanta Computer Inc 188 Wen Hwa 2nd Rd., Kuei Shan Hsiang, Tao Yuan Hsien 333, Taiwan Tel: 886 3 3272345 ; Fax: 886 943 180597 Date: January 19, 2010 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: HFS-CL1B Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics (file: XO-1.5_Schem.pdf) Block Diagram (file: XO-1.5_BlkDia.pdf) Parts List (file: XO-1.5_PartsLst.pdf) Operation Description (file: XO-1.5_OpDes.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _____________________ Joyce Kuo

Quanta Computer Inc 188 Wen Hwa 2nd Rd., Kuei Shan Hsiang, Tao Yuan Hsien 333, Taiwan Tel: 886 3 3272345 ; Fax: 886 943 180597 Date: January 19, 2010 Power of Attorney To whom it may concern, Please be notified that I, Joyce Kuo, have designated Roy Wu in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Roy Wu in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: HFS-CL1B If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Joyce Kuo Company: Quanta Computer Inc TEL: 886 3 3272345 FAX: 886 943 180597 E-mail: [email protected]

1/1 Quanta Computer Inc 188 Wen Hwa 2nd Rd., Kuei Shan Hsiang, Tao Yuan Hsien 333, Taiwan Tel: 886 3 3272345 ; Fax: 886 943 180597 Date: January 19, 2010 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : HFS-CL1B To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:
External Photos (file: XO-1.5_ExtPho.pdf)
Internal Photos (file: XO-1.5_IntPho.pdf)
Test Setup Photos (file: XO-1.5_Tsup.pdf)
User Manual (file: XO-1.5_UserMan.pdf) The application contains technical information, which Quanta Computer Inc deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Joyce Kuo

Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 1 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B 1. External Photograph of EUT Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 2 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 3 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 4 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 5 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 6 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 7 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 8 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 9 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 10 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 11 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 12 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 13 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B 21 cm WLAN Antenna (Tx/Rx) WLAN Antenna (Tx/Rx) Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 14 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 15 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 16 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 17 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 18 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 19 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B 720510 Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 20 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B List of Accessory: Specification of Accessory AC Adapter 1 Brand Name Bestec Model Name NA0241WAA Power Rating I/P:100-240Vac, 50-60Hz, 1A; O/P: 12Vdc, 2A DC Power Cord Type 1.8 meter non-shielded cable with ferrite core AC Adapter 2 Brand Name Bestec Model Name NA0241WAAA Power Rating I/P:100-240Vac, 50-60Hz, 1A; O/P: 12Vdc, 2A DC Power Cord Type 1.8 meter non-shielded cable with ferrite core Battery Brand Name OLPC Model Name CL1 Power Rating 6.5Vdc, 3100mAh, 20.15Wh Type Li-Fe LCD Panel Brand Name CHI MEI Model Name LS075AT011 CPU Brand Name VIA Model Name C7-M(1.0GHz) Camera Brand Name Suyin Model Name CM0316-OLPC01 Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2. AC Adapter 1 and AC Adapter 2 are almost the same; the difference between them is color of appearance only. The AC Adapter 1 is black, and the AC Adapter 2 is white. Only the AC Adapter 2 for all tests. 2. Photograph of Accessory Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 21 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 22 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report N…

Text truncated - open the document above for the full version.

Label Location Battery compartment

A E D C B A E D C B 1 7 6 5 4 3 2 1 7 6 5 4 3 2 1 / 1 3A REV HCCL1014 96 . 12 . 25 DA TE DW G . . NO . . DRA WN DESIGNE D AP P R O VE D S / N SCALE UNIT MM ANGLE 2 PLC 1 PLC LBL RA TING CL1B(HCCL1014,REV3A) se e n ote s NAME MA TERIAL FINISH 7 F , 1 1 6 H OU K ANG ST . SHIN L I N , T AIP EI , T AIW AN , R . O . C . Quanta Computer Inc . MODEL DESCRIPTI ON P AR T NO. ITEM THE 3RD P RO J E CT ION REVISIONS L TR DESCRIPTION DA TE APP FIRST RELEASE 96 . 12 . 25 3C HCCL1014010 1 NOTES: 1.MATERIAL: PC MATTE 8010 2.ADHESIVE BASE:ACRYLIC 3.LABEL FINISH THICKNESS:0.12mm TEXT COLOR: PMS BACKGROUND COLOR: PMS361N 4.FILE NO.:HCCL1014010 0 . 10 T OL + - 3B 3A se e n ote s CL1B Vickey chen Product of China CS20 CT1 12Vdc 2 A OL P C XO-1.5 Quanta Computer Inc. 63.4 55.2 63.4 46.4 19 12 . 2 The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N 22574 FCC ID:HFS-CL1B

Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 32 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B 3. Internal Photograph of EUT Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 33 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 34 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 35 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 36 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 37 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 38 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 39 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 40 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 41 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 42 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 43 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 44 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B WLAN Antenna Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 45 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B WLAN Antenna Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 46 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B WLAN Antenna Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 47 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B WLAN Antenna Photographs of EUT Report No.: EP010517 Model Name: XO-1.5 SPORTON INTERNATIONAL INC. Page Number : 48 of 48 TEL : 886-3-327-3456 Issued Date : Jan. 26, 2010 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : HFS-CL1B 720510 WLAN Antenna

SPORTON INTERNATIONAL INC. Page Number : 1 of 31 TEL : 886-3-327-3456 Report Issued Date : Jan. 25, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-CL1B FCC SAR Test Report Report No. : FA010517 FCC SAR Test Report APPLICANT : Quanta Computer Inc. EQUIPMENT : Laptop Computer BRAND NAME : OLPC MODEL NAME : XO-1.5 FCC ID : HFS-CL1B STANDARD : FCC 47 CFR Part 2 (2.1093) IEEE C95.1-1999 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was received on Jan. 05, 2010 and completely tested on Jan. 20, 2010. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Roy Wu / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 31 TEL : 886-3-327-3456 Report Issued Date : Jan. 25, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-CL1B FCC SAR Test Report Report No. : FA010517 Table of Contents Revision History ................................................................................................................................................................ 3 1. Statement of Compliance .......................................................................................................................................... 4 2. Administration Data ................................................................................................................................................... 5 2.1 Testing Laboratory ............................................................................................................................................ 5 2.2 Applicant ........................................................................................................................................................... 5 2.3 Manufacturer .................................................................................................................................................... 5 2.4 Application Details ............................................................................................................................................ 5 3. General Information ................................................................................................................................................... 6 3.1 Description of Device Under Test (DUT) ........................................................................................................... 6 3.2 Product Photos ................................................................................................................................................. 7 3.3 Applied Standards ............................................................................................................................................ 7 3.4 Device Category and SAR Limits ..................................................................................................................... 7 3.5 Test Conditions ................................................................................................................................................. 7 3.5.1 Ambient Condition .................................................................................................................................. 7 3.5.2 Test Configuration ................................................................................................................................... 8 4. Specific Absorption Rate (SAR) ................................................................................................................................ 9 4.1 Introduction ....................................................................................................................................................... 9 4.2 SAR Definition .................................................................................................................................................. 9 5. SAR Measurement System .......................................................................................................................................10 5.1 E-Field Probe................................................................................................................................................... 11 5.1.1 E-Field Probe Specification ................................................................................................................... 11 5.1.2 E-Field Probe Calibration .......................................................................................................................12 5.2 Data Acquisition Electronics (DAE) ..................................................................................................................12 5.3 Robot ...............................................................................................................................................................12 5.4 Measurement Server .......................................................................................................................................13 5.5 Phantom ..........................................................................................................................................................14 5.6 Device Holder ..................................................................................................................................................15 5.7 Data Storage and Evaluation ...........................................................................................................................17 5.7.1 Data Storage ............................................…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/1/20 System Check_2450MHz_100120 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_100120 Medium parameters used: f = 2450 MHz; σ = 1.93 mho/m; ε r = 53.3; ρ = 1000 kg/m 3 DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(4.19, 4.19, 4.19); Calibrated: 2009/9/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2009/9/18 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Pin=100mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 5.97 mW/g Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.9 V/m; Power Drift = -0.00744 dB Peak SAR (extrapolated) = 12 W/kg SAR(1 g) = 5.16 mW/g; SAR(10 g) = 2.38 mW/g Maximum value of SAR (measured) = 5.75 mW/g 0 dB = 5.75mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/1/20 #01 802.11b_Bottom_0cm_Ch6_Tablet_Ant Degree 0 DUT: 010517 Communication System: 802.11b ; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL_2450_100120 Medium parameters used: f = 2437 MHz; σ = 1.91 mho/m; ε r = 53.3; ρ = 1000 kg/m 3 DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(4.19, 4.19, 4.19); Calibrated: 2009/9/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2009/9/18 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Ch6/Area Scan (181x191x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.012 mW/g Ch6/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.64 V/m; Power Drift = -0.135 dB Peak SAR (extrapolated) = 0.00584 W/kg SAR(1 g) = 0.00445 mW/g; SAR(10 g) = 0.00357 mW/g Maximum value of SAR (measured) = 0.00584 mW/g Ch6/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.64 V/m; Power Drift = -0.135 dB Peak SAR (extrapolated) = 0.00941 W/kg SAR(1 g) = 0.0043 mW/g; SAR(10 g) = 0.00376 mW/g Maximum value of SAR (measured) = 0.00579 mW/g 0 dB = 0.00579mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/1/20 #02 802.11b_Bottom_0cm_Ch6_Tablet_Ant Degree 180 DUT: 010517 Communication System: 802.11b ; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL_2450_100120 Medium parameters used: f = 2437 MHz; σ = 1.91 mho/m; ε r = 53.3; ρ = 1000 kg/m 3 DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(4.19, 4.19, 4.19); Calibrated: 2009/9/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2009/9/18 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Ch6/Area Scan (181x191x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.00987 mW/g Ch6/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.06 V/m; Power Drift = -0.128 dB Peak SAR (extrapolated) = 0.00724 W/kg SAR(1 g) = 0.00549 mW/g; SAR(10 g) = 0.0042 mW/g Maximum value of SAR (measured) = 0.00636 mW/g Ch6/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.06 V/m; Power Drift = -0.128 dB Peak SAR (extrapolated) = 0.011 W/kg SAR(1 g) = 0.00528 mW/g; SAR(10 g) = 0.004 mW/g Maximum value of SAR (measured) = 0.00679 mW/g 0 dB = 0.00679mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/1/20 #03 802.11b_Bottom_0cm_Ch6_Tablet_Ant Degree 0 DUT: 010517 Communication System: 802.11b ; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL_2450_100120 Medium parameters used: f = 2437 MHz; σ = 1.91 mho/m; ε r = 53.3; ρ = 1000 kg/m 3 DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(4.19, 4.19, 4.19); Calibrated: 2009/9/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2009/9/18 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 Ch6/Area Scan (181x191x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.055 mW/g Ch6/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0.977 V/m; Power Drift = 0.186 dB Peak SAR (extrapolated) = 0.110 W/kg SAR(1 g) = 0.048 mW/g; SAR(10 g) = 0.027 mW/g Maximum value of SAR (measured) = 0.049 mW/ g 0 dB = 0.049mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/1/20 #04 802.11b_Primary Portrait_0cm_Ch6_Tablet_Ant Degree 0 DUT: 010517 Communication System: 802.11b ; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL_2450_100120 Medium parameters used: f = 2437 MHz; σ = 1.91 mho/m; ε r = 53.3; ρ = 1000 kg/m 3 DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(4.19, 4.19, 4.19); Calibrated: 2009/9/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2009/9/18 - Ph…

Text truncated - open the document above for the full version.