HFS-FG2TABLET PC

TOSHIBA AT200 User Information Guide Blade.book Page 1 Thursday, September 22, 2011 11:05 AM Blade.book Page 2 Thursday, September 22, 2011 11:05 AM TOSHIBA AT200 User Information Guide1 Documentation ■A comprehensive online user’s manual is preinstalled on your tablet. To access it, tap the Online Manual icon on the Apps menu. ■Refer to the online user’s manual for detailed information and instructions concerning each item in this manual. ■The online user’s manual installed on your tablet is the latest available at the production time. Please check http://www.toshiba.co.jp/worldwide/ for the most up to date online user’s manual. Safety Icons Safety icons are used in this manual to bring important information to your attention. Each type of icon and its implication are identified as shown below. Quick Start Unpack the box 1. Remove the components and tablet from the box. Save the packing materials in case you need them later. 2. Remove the documentation package for important information. Check the components Your tablet comes with: ■AC adaptor (2-pin or 3-pin) ■Power cable ■Several documents, including the TOSHIBA Instruction Manual for Safety and Comfort. It may also ship with documentation for other software that may be pre- installed on your tablet. Some software may differ from its retail version (if available), and may not include user manuals or all program functionality. If any of the items are missing or damaged, contact your dealer immediately. Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read. A note is a hint or advice that helps you make best use of your equipment. All product specifications, configurations, prices, system/component/options availability are all subject to change without notice. Blade.book Page 1 Thursday, September 22, 2011 11:05 AM 2TOSHIBA AT200 User Information Guide Connecting the AC adaptor 1. Plug the USB connector of the power cable into the USB port on the AC adaptor. 2. Plug the power connector of the power cable into the docking interface on your tablet. 3. Plug the AC adaptor into a live wall outlet. Turning on/off the power Press and hold Power button to turn on the tablet. The tablet will vibrate to indicate the status. To turn off the tablet, press and hold Power button for approximately 2 seconds and select OK. Depending on the model, either a 2-pin or 3-pin AC adaptor will be bundled with the tablet. You can charge the tablet by connecting the power cable to a USB port on a computer. TOSHIBA recommends charging when the tablet goes into sleep mode. 2-pin 3-pin Blade.book Page 2 Thursday, September 22, 2011 11:05 AM TOSHIBA AT200 User Information Guide3 Quick Tour The following figure shows each important part of your tablet. * Provided with some models. Product appearance depends on the models you purchased. 1. Display screen8. Micro USB port15. Speakers 2. Web Camera (front)9. Micro HDMI port16. Docking interface 3. Ambinet light sensor10. Memory media slot17. Wireless LAN, GPS, 3G* and Bluetooth antennas (not shown) 4. Web Camera indicator11. Power button18. Camera flash 5. Microphone12. Multi function LED indicator19. Camera (back) 6. SIM card slot*13. Volume down/up button 7. Headphone/Microphone combo jack 14. Multi function switch 11 2 1 34 5 191817 151516 6 7 8 9 10 12 14 13 17 Blade.book Page 3 Thursday, September 22, 2011 11:05 AM 4TOSHIBA AT200 User Information Guide Switching TOSHIBA AT200 on for the First Time When starting to use the tablet for the first time, there are a few basic settings that will need to be configured before the tablet is ready for use as detailed below: 1. Press and hold Power button on the tablet to turn on the power. During the initial start-up process you will be presented with the setup screen. 2. Choose your preferred language and tap Start to continue. 3. Connect to a wireless network via Wi-Fi. You can choose to skip and turn Wi-Fi on later in Settings screen. For details, please refer to the Connecting to Wi-Fi networks section in the online User’s Manual. 4. Choose whether to use Google Location Service™ and tap Next to continue. 5. Set date and time or use network-provided time and tap Next to continue. 6. Register or sign in with a Google™ account. You can also skip this step by tapping Skip. 7. Your tablet is now ready for use. Getting to Know the HOME Screen The HOME screen is your starting point for using all the installed applications on your tablet. You can customize the HOME screen to display the widgets, application shortcuts, wallpapers and other shortcuts you prefer. 1. Apps menu5. Back 2. Customize6. Home 3. Widgets7. Recent apps 4. Application shortcuts8. System bar 5 12 3 4 67 8 Blade.book Page 4 Thursday, September 22, 2011 11:05 AM TOSHIBA AT200 User Information Guide5 Accessing the Online User’s Manual To benefit most from the TOSHIBA AT200 Tablet, we recommend that you spend a short time referring to the online User’s Manual which can be displayed by the following steps: 1. Tap Apps () on the Home screen. 2. Tap the Online Manual icon. Configuring Automatic Power Down Mode By default the TOSHIBA AT200 Tablet is set to automatically switch itself off into sleep mode after 2 minutes. In the event that this period is not sufficient for your needs, it can be changed in the Settings screen. Please refer to the Screen settings section in the online User’s Manual. Press the Power button once to resume from sleep mode. After resuming from sleep mode, the screen remains locked. You can unlock the screen by the following steps: 1. Press and hold the unlock icon (). 2. Slide the icon towards the appearing circle. ItemDescription Apps menuSee all your tablet’s apps. CustomizeAdd widgets, apps, wallpapers, and more to your Home screen. WidgetsWidgets show you the…

Text truncated - open the document above for the full version.

1 Instruction Manual for Safety and Comfort All of the Safety Instructions contained in this Manual must be read carefully and must be fully understood before you attempt to use your product, in order to avoid potential hazards that could cause bodily injury, property dam- age, or damage the product. The Safety Instructions contained in this Manual have been categorized according to the seriousness of the poten- tial hazards, through the use of Signal Words. Handling of the battery pack ■Never attempt to dispose of a battery pack by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven). ■Never attempt to disassemble, tamper with or repair a battery pack. ■Never short-circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. ■Never drive a nail or any other sharp object into the battery pack, hit battery pack with a hammer or other object or step on it. ■Never charge the battery pack by a method other than as instructed in the User's Manual. ■Never connect the battery pack to a plug socket or a car cigarette plug socket. ■Never allow a battery pack to become wet. A wet battery pack will overheat or ignite causing rupture or fire, possibly resulting in death or serious injury. ■Never store a battery pack in an area of high humidity. ■Never expose a battery pack to abnormal shock, vibration or pressure. Failure to observe the foregoing could result in serious injury. Use of correct battery pack Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User's Manual. Other battery packs have different voltage and terminal polarities. Use of non-conforming battery packs could generate smoke or cause fire or rupture, possibly resulting in serious injury. Battery safety Never allow caustic electrolyte fluid leaked from the battery pack to contact your eyes, body or clothing. Immediately wash with large amounts of running water and obtain prompt medical attention. Battery pack warning indicators Always immediately turn the power off and disconnect the power cable/cord plug from the plug socket and stop using the battery pack if you observe any of the following conditions: Signal WordsMeaning Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor injury or moderate injury. Indicates a potentially hazardous situation which, if not avoided, may result in property damage. Provides important information. Power GMH500160F10 *GMH500160F10* 2 ■Offensive or unusual odor ■Excessive heat ■Discoloration ■Deformation, cracks or leaks ■Smoke ■Other unusual event during use, such as abnormal sound Do not turn on your product's power again until an authorized Toshiba service provider has checked it for safety. Continued use could cause a fire or rupture possibly resulting in serious injury or product failure including but not limited to the loss of data. Disposal of used battery packs Always dispose of used battery packs in compliance with all applicable laws and regulations. Indications of damage if your product is dropped If your product is dropped, and emits smoke, unusual odor or excessive heat, immediately unplug the AC adaptor (if connected) and shut off your product. Do not turn on your product's power again until an authorized Toshiba service provider has checked it for safety. Continuing to use your product could cause a fire or battery rupture possibly resulting in serious injury. It could also cause a product failure including but not limited to the loss of data. Do not disassemble, modify, tamper with or repair your product Do not attempt to disassemble, modify, tamper with or repair product (including AC adaptor). Disassembly, modifi- cation, tampering or repairing your product could cause fire or electric shock, possibly resulting in serious injury. Please contact an authorized Toshiba service provider for any repair service. Handling the AC adaptor and power cables/cords or plugs When handling the power cable/cord, follow these precautions: ■Never tamper with the power cable/cord or plug. ■Never cover the AC adaptor with any object. ■Never attempt to disassemble or repair an AC adaptor. Doing any of the above may damage the cables, and/or result in a fire or electric shock, possibly resulting in seri- ous injury. Attaching the power cable/cord ■Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly result- ing in serious injury. ■Be careful if you use a multiple connector. An overload on one socket could cause a fire or electric shock, pos- sibly resulting in serious injury. ■The socket outlet must be near to your product and easily accessible. Disconnecting electrical power To disconnect electrical power to your product, remove the power cord/cable from the electrical outlet. Dust on the power plug connectors or connector base If dust gets on the power plug connectors or connector base, turn the power off and disconnect the power plug. Then clean the connector and/or connector base with a dry cloth. Continuing to use your product without cleaning the power plug may result in a fire or an electric shock, possibly resulting in serious injury. Only use TOSHIBA AC adaptor Always use the TOSHIBA AC adaptor that was provided with your product. Use of an incompatible AC adaptor could cause fire or damage to your product possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. Use correct power source Never plug the AC adaptor into a power source that does no…

Text truncated - open the document above for the full version.

Rev. 1/1/03 Quanta Computer Inc. No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan Tel: +886-3-327-2345; Fax: +886-3-397-2418 Date: September 30, 2011 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID: HFS-FG2 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram Parts List Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ Eric Huang

1/1 Quanta Computer Inc. No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan Tel: +886-3-327-2345; Fax: +886-3-397-2418 Date: September 30, 2011 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 RE : Certification Application FCC ID : HFS-FG2 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test Setup Photos  User Manual The application contains technical information, which Quanta Computer Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Eric Huang

Quanta Computer Inc. No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan Tel: +886-3-327-2345; Fax: +886-3-397-2418 Date: September 30, 2011 Power of Attorney To whom it may concern, Please be notified that I, Quanta Computer Inc,, have designated Willy Chen in Bureau Veritas Consumer Products Services (H.K.)Ltd., Taoyuan Branch.,and Eric Huang in Quanta Computer Inc., as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Willy Chen in Bureau Veritas Consumer Products Services (H.K.)Ltd., Taoyuan Branch., and Eric Huang in Quanta Computer Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: HFS-FG2 If you have any acknowledgement and response, please send it to Bureau Veritas Consumer Products Services (H.K.)Ltd., directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Joyce Kuo Applicant: Quanta Computer Inc. Tel: +886-3-327-2345 Fax: +886-3-397-2418 E-Mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

55 mm 12 mm H=2mm, distinct & visible

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15

Report No.: SA110829C12 1 Report Format Version 4.0.0 FCC SAR TEST REPORT REPORT NO.: SA110829C12 MODEL NO.: TOSHIBA AT20****** (where “ * “ can be 0-9, a-z, A-Z, /, - or blank) FCC ID: HFS-FG2 RECEIVED: Aug. 29, 2011 TESTED: Sep. 08, 2011 ISSUED: Sep. 26, 2011 APPLICANT: QUANTA COMPUTER INC. ADDRESS: No.211,Wen Hwa 2nd Road,Kuei Shan Hsiang Taoyuan Hsien, 333 Taiwan ,R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 24 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: SA110829C12 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................................................. 3 1. CERTIFICATION ............................................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................................. 5 2.1 GENERAL DESCRIPTION OF EUT ................................................................................................ 5 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................................................. 6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM ....................................................................... 7 2.4 TEST EQUIPMENT ....................................................................................................................... 10 2.5 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION .................................... 11 3. RECIPES FOR TISSUE SIMULATING LIQUIDS .......................................................................... 15 4. SYSTEM VALIDATION .................................................................................................................. 17 4.1 TEST PROCEDURE...................................................................................................................... 17 4.2 VALIDATION RESULTS ................................................................................................................ 18 4.3 SYSTEM VALIDATION UNCERTAINTIES .................................................................................... 19 5. TEST RESULTS ............................................................................................................................ 20 5.1 TEST PROCEDURES ................................................................................................................... 20 5.2 MEASURED SAR RESULTS ........................................................................................................ 22 6. SAR LIMITS ................................................................................................................................... 23 7. INFORMATION ON THE TESTING LABORATORIES .................................................................. 24 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report No.: SA110829C12 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release N/A Sep. 26, 2011 Report No.: SA110829C12 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: Tablet PC MODEL NO.: TOSHIBA AT20****** (where “ * “ can be 0-9, a-z, A-Z, /, - or blank) FCC ID: HFS-FG2 BRAND: TOSHIBA APPLICANT: QUANTA COMPUTER INC. TESTED: Sep. 08, 2011 STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) IEEE 1528-2003 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. PREPARED BY : , DATE : Sep. 26, 2011 Rennie Wang / Assistant Manager APPROVED BY : , DATE : Sep. 26, 2011 Gary Chang / Technical Manager Report No.: SA110829C12 5 Report Format Version 4.0.0 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT EUT Tablet PC MODEL NO. TOSHIBA AT20****** (where “ * “ can be 0-9, a-z, A-Z, /, - or blank) FCC ID HFS-FG2 MODULATION TYPE CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION TECHNOLOGY DSSS, OFDM TRANSFER RATE 802.11b:11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps 802.11n (20MHz): up to 72.0Mbps OPERATING FREQUENCY 2412 ~ 2462MHz MAX. SAR (1g) 1.19 W/kg ANTENNA TYPE PIFA antenna with -1.06dBi gain NOTE: 1. The “ * ” in model number TOSHIBA AT20****** can be 0-9, a-z, A-Z, /, - or blank for marketing purpose. 2. The EUT provides one completed transmitter and one receiver. MODULATION MODE TX FUNCTION 802.11b 1TX 802.11g 1TX 802.11n (20MHz) 1TX 3. The EUT consumes power from the following charger and battery: CHARGER BRAND TOSHIBA MODEL ADP-10BW BA INPUT POWER 100-240Vac, 0.4A, 50-60Hz OUTPUT POWER 5Vdc, 2A BATTERY BRAND TOSHIBA MODEL PA3995U-1BRS POWER RATING 6690mAH Report No.: SA110829C12 6 Report Format Version 4.0.0 4. The EUT Conducted average power(dBm) listed as below: CH FREQ. 802.11b 802.11g 802.11n (20MHz) 1 2412MHz 15.00 13.70 11.60 6 2437MHz 15.10 13.90 11.80 11 2462MHz 15.30 14.10 12.00 5. The above EUT information is declared by…

Text truncated - open the document above for the full version.

Report No.: RF110829C12 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF110829C12 MODEL NO.: TOSHIBA AT20****** (where “ * “ can be 0-9, a-z, A-Z, /, - or blank) FCC ID: HFS-FG2 RECEIVED: Aug. 29, 2011 TESTED: Sep. 01 ~ Sep. 05, 2011 ISSUED: Sep. 21, 2011 APPLICANT: QUANTA COMPUTER INC. ADDRESS: No.211, Wen Hwa 2nd Road,Kuei Shan Hsiang Taoyuan Hsien, 333 Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 63 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110829C12 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD...............................................................................................4 1. CERTIFICATION............................................................................................................5 2. SUMMARY OF TEST RESULTS ...................................................................................6 2.1 MEASUREMENT UNCERTAINTY.................................................................................6 3. GENERAL INFORMATION ............................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ..............................................................................7 3.2 DESCRIPTION OF TEST MODES ................................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..............................10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................12 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................12 4. TEST TYPES AND RESULTS .....................................................................................13 4.1 RADIATED EMISSION MEASUREMENT ...................................................................13 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................................13 4.1.2 TEST INSTRUMENTS.................................................................................................14 4.1.3 TEST PROCEDURES .................................................................................................15 4.1.4 DEVIATION FROM TEST STANDARD........................................................................15 4.1.5 TEST SETUP...............................................................................................................16 4.1.6 EUT OPERATING CONDITIONS ................................................................................16 4.1.7 TEST RESULT.............................................................................................................17 4.2 CONDUCTED EMISSION MEASUREMENT ..............................................................28 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................................28 4.2.2 TEST INSTRUMENTS.................................................................................................28 4.2.3 TEST PROCEDURES .................................................................................................29 4.2.4 DEVIATION FROM TEST STANDARD........................................................................29 4.2.5 TEST SETUP...............................................................................................................30 4.2.6 EUT OPERATING CONDITIONS ................................................................................30 4.2.7 TEST RESULTS ..........................................................................................................31 4.3 6dB BANDWIDTH MEASUREMENT...........................................................................35 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................................35 4.3.2 TEST INSTRUMENTS.................................................................................................35 4.3.3 TEST PROCEDURE....................................................................................................35 4.3.4 DEVIATION FROM TEST STANDARD........................................................................35 4.3.5 TEST SETUP...............................................................................................................36 4.3.6 EUT OPERATING CONDITIONS ................................................................................36 4.3.7 TEST RESULTS ..........................................................................................................37 4.4 MAXIMUM OUTPUT POWER .....................................................................................40 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT......................................40 4.4.2 INSTRUMENTS ...........................................................................................................40 Report No.: RF110829C12 3 Report Format Version 4.0.0 4.4.3 TEST PROCEDURE....................................................................................................40 4.4.4 DEVIATION FROM TEST STANDARD........................................................................41 4.4.5 TEST SETUP...............................................................................................................41 4.4.6 EU…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION (SAR Test Set Up Photos) 2 Rear Face (0 cm Gap) Secondary Landscape (0 cm Gap) Secondary Portrait (0 cm Gap) 3 Antenna Location Primary Landscape Secondary Landscape Primary Portrait Secondary Portrait WLAN Antenna

1 PHOTOGRAPHS OF THE TEST CONFIGURATION (FOR WLAN & BLUETOOTH) CONDUCTED EMISSION TEST (TEST MODE A) 2 CONDUCTED EMISSION TEST (TEST MODE B) 3 RADIATED EMISSION TEST (TEST MODE A) 4 RADIATED EMISSION TEST (TEST MODE B)