HFS-FG6ATablet PC

Tablet Miss Quick Start Guide BungBungameTablet Introduction Thank you for choosing BungBungame Tablet. This manual covers the basic features and functions of the Tablet and is aimed at enhancing your experience of using the product. Warranty The warranty of BungBungameTablet covers the device one year The warranty of BungBungameTablet covers the device one year with limited service. If the Tablet breaks down while you are using it properly, please contact your dealer for free maintenance service. For details about the scope of the warranty, please refer to the User Manual (complete version) available on the Tablet or on BungBungamećs website. Model: Miss Operating temperature: 0~35⺍ Rating :5V 2A MAX FCC ID: HFS-FG6A Designed by BungBungame Inc. BungBungameTablet Introduction Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. BungBungameTablet Introduction FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is user body or set the device to lower output power if such function is available. BungBungameTablet Buttons and Ports BungBungameTablet Buttons and Ports BungBungameTablet Important Note NB Please follow the instructions Please follow the instructions in the Manual to protect your Tablet from potential damage and to help to ensure your personal safety. Environmental Protection NB You are urged to recycle or dispose this product and related NB You are urged to recycle or dispose this product and related components (e.g. batteries, power leads) properly in accordance to regulations in your community when it has outlived its useful life. By doing this, you can help improve the environment as well as minimize the potential negative effects caused by the waste material. For more information about how to dispose the product properly, please contact your dealer or your local authorities. NBTo optimise your batteryćs life and performance and to protect your personal safety, please use the battery in proper temperatures (between 15 濎 - 25濎) and avoid extreme temperatures that might harm the performance of the battery as well as cause a breakdown of the product or other safety concerns. BungBungameTablet Important Note NBWhen battery charge display shows that the battery is low, follow the steps below immediately to avoid data loss caused by the automatic shutdown of the Tablet: 1. Save all files you want to keep. 2. Connect the adapter to the mains and then to the Tablet. Then you can use your Tablet on the mains while you wait Then you can use your Tablet on the mains while you wait for the battery to charge. 3. If you do not have the adapter with you, please shut down the Tablet using normal procedures. NBTo prevent potential damage that might be caused by overheating, corroding and rusting, power leakage, exploding, or burning of the battery, please do not try to break or dissemble the battery, or place it in high temperatures, near a heat source, in a humid, rust, or corrosion condition, under high pressure, or directly in the sun. NBThe residue of battery leakage is corrosive and can cause harm to human bodies. If the residue of battery leakage contact you, you must flush the affected area with lots of clean water and see a physician immediately. NBYou should also keep the battery out of the reach of children. NB Only use the battery and charger approved by BungBungameto NB Only use the battery and charger approved by BungBungameto avoid dangers like battery burning or exploding caused by using other batteries improperly. NBPlease avoid shortcutting or using any faulty charger or battery, so as to prevent damage to the battery or to electronic circuit parts connected to the battery. Unsafe areas NBTo protect your personal safety, please shut down the Tablet and remove the power lead…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

Label FCC ID:HFS-FG6A Label Location Note: The FCC ID label shown will be readily visible to the purchaser at the time of purchase. Front left side of EUT

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15

Report No.: SA120524C03 of 5 Report Format Version 5.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA120524C03 MODEL NO.: Miss FCC ID: HFS-FG6A RECEIVED: May 24, 2012 TESTED: Jun. 04 ~ Jun. 25, 2012 ISSUED: Jun. 26, 2012 APPLICANT: Quanta Computer Inc. ADDRESS: No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA120524C03 of 5 Report Format Version 5.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................. 3 1. CERTIFICATION ................................................................................................................ 4 2. REDUCED CONDITION FOR SAR .................................................................................... 5 3. MAXIMUM MEASURED POWER OF EUT ........................................................................ 5 4. CONCLUSION .................................................................................................................... 5 Report No.: SA120524C03 of 5 Report Format Version 5.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120524C03 Original release Jun. 26, 2012 Report No.: SA120524C03 of 5 Report Format Version 5.0.0 4 1. CERTIFICATION PRODUCT: Tablet PC MODEL: Miss BRAND: BungBungame APPLICANT: Quanta Computer Inc. TESTED: Jun. 04 ~ Jun. 25, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: Miss) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Jun. 26, 2012 Joanna Wang / Senior Specialist APPROVED BY : , DATE :Jun. 26, 2012 Gary Chang / Technical Manager Report No.: SA120524C03 of 5 Report Format Version 5.0.0 5 2. REDUCED CONDITION FOR SAR When output power is ≤ 60/f(GHz) mW, SAR evaluation is not required. 3. MAXIMUM MEASURED POWER OF EUT Maximum measured transmitter power: MODE FREQUENCY (MHz) CONDUCTED POWER (dBm) CONDUCTED POWER (mW) SAR THRESHOLD (mW) 802.11b 2412 13.68 23.335 24.876 2437 13.46 22.182 24.620 2462 13.44 22.080 24.370 802.11g 2412 13.51 22.439 24.876 2437 13.67 23.281 24.620 2462 13.45 22.131 24.370 802.11n (20MHz) 2412 13.40 21.878 24.876 2437 13.63 23.067 24.620 2462 13.41 21.928 24.370 MODE CONDUCTED POWER (dBm) CONDUCTED POWER (mW) SAR THRESHOLD (mW) Bluetooth 3.17 2.075 24.194 NOTE: Antenna gain is -2.89dBi 4. CONCLUSION No SAR evaluation is required since transmitter power of EUT is below FCC threshold.

Report No.: RF120524C03-1 1 of 49 Report Format Version 5.0.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF120524C03-1 MODEL NO.: Miss FCC ID: HFS-FG6A RECEIVED: May 24, 2012 TESTED: Jun. 04 ~ Jun. 15, 2012 ISSUED: Jun. 26, 2012 APPLICANT: Quanta Computer Inc. ADDRESS: No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120524C03-1 2 of 49 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION ........................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 12 4. TEST TYPES AND RESULTS .................................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................. 13 4.1.2 TEST INSTRUMENTS ................................................................................................................ 14 4.1.3 TEST PROCEDURES ................................................................................................................ 15 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................................... 15 4.1.5 TEST SETUP .............................................................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ............................................................................................... 16 4.1.7 TEST RESULTS ......................................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................. 26 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................................... 26 4.2.2 TEST INSTRUMENTS ................................................................................................................ 26 4.2.3 TEST PROCEDURES ................................................................................................................ 27 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................................... 27 4.2.5 TEST SETUP .............................................................................................................................. 28 4.2.6 EUT OPERATING CONDITIONS ............................................................................................... 28 4.2.7 TEST RESULTS ......................................................................................................................... 29 4.3 NUMBER OF HOPPING FREQUENCY USED .......................................................................... 31 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................................ 31 4.3.2 TEST SETUP .............................................................…

Text truncated - open the document above for the full version.

Report No.: RF120524C03 1 of 44 Report Format Version 5.0.0 FCC TEST REPORT (WLAN) REPORT NO.: RF120524C03 MODEL NO.: Miss FCC ID: HFS-FG6A RECEIVED: May 24, 2012 TESTED: Jun. 04 ~ Jun. 25, 2012 ISSUED: Jun. 26, 2012 APPLICANT: Quanta Computer Inc. ADDRESS: No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120524C03 2 of 44 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 12 4. TEST TYPES AND RESULTS ..................................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 13 4.1.2 TEST INSTRUMENTS ................................................................................................................. 14 4.1.3 TEST PROCEDURES ................................................................................................................. 15 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 15 4.1.5 TEST SETUP ............................................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 16 4.1.7 TEST RESULTS .......................................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 27 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 27 4.2.2 TEST INSTRUMENTS ................................................................................................................. 27 4.2.3 TEST PROCEDURES ................................................................................................................. 28 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 28 4.2.5 TEST SETUP ............................................................................................................................... 28 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 28 4.2.7 TEST RESULTS .......................................................................................................................... 29 4.3 6dB BANDWIDTH MEASUREMENT .......................................................................................... 31 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................................................ 31 4.3.2 TEST SETUP ........................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST