HFS-IS3Smart Phone

F- 11D 1. Definition ( 適用 This Document is based on the Fujitsu Low Tier Smart Phone product requirement Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and Bluetooth. The design platforms for IS3 are based o Ice Cream Sandwich (ICS) version. 2. Basic Specification ( 2.1 ID, Outlook and Form Factor Light Sensor 11D Specification 適用 ) This Document is based on the Fujitsu Low Tier Smart Phone product requirement Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and Bluetooth. The design platforms for IS3 are based o n Qualcomm 8255A- 0 and Google Android OS Ice Cream Sandwich (ICS) version. 2. Basic Specification ( 基本仕様) ID, Outlook and Form Factor Specification This Document is based on the Fujitsu Low Tier Smart Phone product requirement 1 provided by Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and 0 and Google Android OS Form Factor Bar type Target weight 124 g Dimensions 119.4mm(L) x 60mm(W) x 10.85mm(T) Product Cubage 77.7 cc 2.2 System Temperature and Humidity 1) Operating temperature/Humidity -5~45 degree C / 0~80 %RH 2) Storage Temperature / Humidity -25~70 degree C / 0~90 %RH 3) RF portion * operating temperature -10~55 degree C 2.3 Hardware Specification (ハードウェア ハードウェアハードウェア ハードウェア仕 仕仕 仕 様 様様 様) Item Specification CPU Qualcomm MSM8255A-0 SoC, CorTex A8 core The CPU clock speed is running up to 1 GHz. MCP 4 GB eMMC, On board 1 GB LPDDR2 DRAM, 400MHz, PoP Display 3.7” LCD 16.7M color depth, WVGA (800x480) resolution Touch Panel Capacitive type flat panel, 5 points multi-touch SIM Standard ETSI TS 102 221 SIM interface WLAN Broadcom WiFi Chip BCM4330 Module, support 802.11 b/g/n with the following functions supported
Mobile hotspot
AOSS
WiFi Direct
WPS mode BT Broadcom BCM4330 module, support BT3.0 FM Transmitter FM transmitter frequency: 77.4MHz ~ 85MHz USB
USB 2.0 FS/HS client
Micro-B type connector
For both Data Sync and power charging (Earphone will be sell with EUT and EU market) Sensors* Accelerator Compass Proximity (On: 2cm / Off: 2.5cm) Ambient light sensor Lux Brightness 0Lx～50Lx 25cd/m^2～105cd/m^2 150Lx～300Lx 54cd/m^2～200cd/m^2 80～100cd/m^2 700Lx～750Lx more than 100cd/m^2 IrDA (Operation Degree: 20cm/30 deg) Speaker 0.5 Watt Earphone Stereo earphone set supported with insertion detection (Earphone will be sell with EUT and EU market) Receiver 10mWatt Based on JIS C5532 Camera 5Mp AF CMOS camera on the back side. GPS Supported A-GPS Supported Vibrator Yes LED LED 3 color LED supported (blue, green, red) Battery Lithium Ion type with 1520 mAh Waterproof IPX7, IPX8 (1.5m) 2.4 Radio Interface Specification 2.4.1 Main Interfaces (Preliminary) Features Description Notes Frequency GSM-850 (824-849MHz; 869 – 894MHz). PCS-1900 (1850-1910MHz; 1930 – 1990MHz) WCDMA 826.4-846.6MHz RF system MSM8255A-0+QTR8615 UMTS/HSDPA 800/1700/2100 PMIC PM8058 Tele Service Coding Type AMR-NB, FR, EFR, HR, AMR-WB GSM Voice Feature Support MT/MO call Emergency call Ciphering A5/1, A5/3 Circuit-switching data 9.6 kbps, 14.4 kbps, 64kbps(for VT supported) GPRS DTM operation Simple Class A Terminal Class Class 12 (4Rx + 4Tx, max:5) Service Class Class B Coding Scheme CS1, CS2, CS3 and CS4 Ciphering GEA1, GEA2, GEA3 Power Control GSM05.08 Sec. 4 Point to Point Supported Multiple PDP 3 Primary PDP contexts 2 Secondary PDP contexts UMTS rel.99 Division Duplex FDD Peak PS data rate 384 kbps UL/ 384 kbps DL Peak CS data rate 64 kbps UL/ 64 kbps DL (64/14.4/9.6 kbps) HSDPA HS-DSCH channel Max 10ch Modulation QPSK/ 16QAM Category Support HSDPA Category 6/8; Peak Rate 7.2 Mbps/DL (Standalone); Up to 384K bps/UL Modulation 16QAM, QPSK Logical Channels HS-SCCH (up to 4 simultaneously) HS-DPCCH HS-PDSCH – up to 10 channels Data Service Data mode CSD Rate Up to 9.6, 14.4 and 64kbps DTE/DCE interface via USB 2.0 full speed 3GPP 27.007 AT Command Set 3GPP 27.005 Short Message SMS SMS Class 0, 1 and 2 GSM TS7.05 / Short Message MT/MO GPS gpsOne® Gen 6 Engine support, C/No Avg 37 dB/Hz 2.5.2 Full Feature Set (Preliminary) Features Description Notes Vocoder Supported Frequency Band GSM 850 PCS 1900 UMTS 2100/1700/800 Automatic Mode Manual band selection GPRS Class B Class 12 (4Tx, 2Rx, max:5) CS1, CS2, CS3 and CS4 Launch the application with GPRS DTMF Supported Mute Supported AMR audio for multimedia usage Supported Short Message Service Mobile-Originated (SMS MO) Features Description Notes SMS MO in UCS2 format See UCS2 section for details Last TP-MR Special data field in the SIM where the last message reference used is stored. This data field ensures that the references are unique. Message Service via GPRS (MO) depends on carrier service Read and send during voice call Support Read and send during data connection is active Support Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. I…

Text truncated - open the document above for the full version.

No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan R.O.C. Declaration for non-US Channel May 11, 2012 We, Quanta Computer Inc. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: HFS-IS3 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you!

No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan R.O.C. Date: 2012-05-11 A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned Quanta Computer Inc. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan and Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd. Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan to act on our behalf in all matters relating to all processes required in FCC certification and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’ t hesitate to contact us. Thank you!

No.211, Wen Hwa 2nd Road , Kuei Shan Hsiang Tao Yuan Shien, Taiwan R.O.C. Date: 2012-05-09 FCC ID: HFS-IS3 To the attention of Federal Communications Commission Federal Communications CommissionFederal Communications Commission Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Confidentiality RequestConfidentiality Request Confidentiality Request Pursuant to DA 04-1705 of the commissionಬ s public notice, we request short-term confidential treatment for the following information until November 9 th , 2012 in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos External photosExternal photos External photos T TT Test Setup photos est Setup photosest Setup photos est Setup photos User UserUser Userಬ ಬಬ ಬ s manual s manuals manual s manual Internal Photos Internal PhotosInternal Photos Internal Photos Sincerely yours, Quanta Computer Inc. Tel.: 03-327-2345

Page 1 CONSTRUCTION PHOTOS OF EUT

FCC ID: HFS-IS3 Label location Note: The FCC ID label shown will be readily visible to the purchaser at the time of purchase. EUT Label Label location-backside of cellphone where battery compartment area.

+/- 0.25 MM HCIS3001010 HCIS3001 2012-02-23 KATE JINN 2A RATING LBL JP IS3(HCIS3001,REV3A) RATING LBL JP IS3 XXX-XXXXX XXX-XXXXX

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12

FCC SAR Test Report Report Format Version 4.1.0 Page No. : 1 of 26 Report No. : SA120321C23 Issued Date : Apr. 12, 2012 Revision : R01 FCC SAR Test Report Report No. : SA120321C23 Applicant : Quanta Computer Inc. Address : No. 211, Wen Hwa 2nd Road, Kuei Shan Hsiang Tao Yuan Hsien, Taiwan R.O.C. Product : Smart Phone FCC ID : HFS-IS3 Brand : Fujitsu Model No. : F-11D Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 648474 D01 v01r05 / KDB 941225 D01 v02 KDB 941225 D03 v01 / KDB 941225 D06 v01 Date of Testing : Apr. 01, 2012 ~ Apr. 09, 2012 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. This test report consists of 26 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Prepared By : Pettie Chen / Specialist Approved By : Roy Wu / Manager FCC SAR Test Report Report Format Version 4.1.0 Page No. : 2 of 26 Report No. : SA120321C23 Issued Date : Apr. 12, 2012 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure ................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 13 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14 3.4.5 SAR Averaged Methods ................................................................................................................................... 14 4. SAR Measurement Evaluation ............................................................................................................................................ 15 4.1 EUT Configuration and Setting ................................................................................................................................... 15 4.2 EUT Testing Position .................................................................................................................................................. 15 4.3 Tissue Verification ...................................................................................................................................................... 18 4.4 System Verification ..................................................................................................................................................... 18 4.5 Conducted Power Resu…

Text truncated - open the document above for the full version.

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/01 System Check_H835_120401 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d092 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H835_0401 Medium parameters used: f = 835 MHz; σ = 0.922 mho/m; ε r = 43.2; ρ = 1000 kg/m 3 Ambient Temperature：22.1 °C; Liquid Temperature：21.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.14, 10.14, 10.14); Calibrated: 2012/02/23 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 3.09 mW/g Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.4 V/m; Power Drift = -0.012 dB Peak SAR (extrapolated) = 3.66 W/kg SAR(1 g) = 2.43 mW/g; SAR(10 g) = 1.6 mW/g Maximum value of SAR (measured) = 3.09 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/02 System Check_B835_120402 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d092 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: B835_0402 Medium parameters used: f = 835 MHz; σ = 0.994 mho/m; ε r = 55; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.47, 10.47, 10.47); Calibrated: 2012/02/23 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 3.02 mW/g Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 53.3 V/m; Power Drift = -0.020 dB Peak SAR (extrapolated) = 3.55 W/kg SAR(1 g) = 2.38 mW/g; SAR(10 g) = 1.57 mW/g Maximum value of SAR (measured) = 3.02 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/05 System Check_B835_120405 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d092 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: B835_0405 Medium parameters used: f = 835 MHz; σ = 0.995 mho/m; ε r = 55; ρ = 1000 kg/m 3 Ambient Temperature：22.4 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3800; ConvF(8.94, 8.94, 8.94); Calibrated: 2011/08/05 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/06/24 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 3.28 mW/g Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.9 V/m; Power Drift = -0.056 dB Peak SAR (extrapolated) = 3.74 W/kg SAR(1 g) = 2.58 mW/g; SAR(10 g) = 1.71 mW/g Maximum value of SAR (measured) = 3.23 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/03 System Check_H1900_120403 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H1900_0403 Medium parameters used: f = 1900 MHz; σ = 1.38 mho/m; ε r = 39.8; ρ = 1000 kg/m 3 Ambient Temperature：2 °C; Liquid Temperature：2°C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(8.83, 8.83, 8.83); Calibrated: 2012/02/23 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 14.0 mW/g Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 100.8 V/m; Power Drift = 0.000 dB Peak SAR (extrapolated) = 17.5 W/kg SAR(1 g) = 9.36 mW/g; SAR(10 g) = 4.82 mW/g Maximum value of SAR (measured) = 13.5 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/05 System Check_B1900_120405 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: B1900_0405 Medium parameters used : f = 1900 MHz; σ = 1.55 mho/m; ε r = 52.6; ρ = 1000 kg/m 3 Ambient Temperature：2°C; Liquid Temperature：°C DASY4 Configuration: - Probe: EX3DV4 - SN3800; ConvF(6.97, 6.97, 6.97); Calibrated: 2011/08/05 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/06/24 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 14.4 mW/g Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 97.2 V/m; Power Drift = -0.003 dB Peak SAR (extrapolated) = 18.2 W/kg SAR(1 g) = 9.57 mW/g; SAR(10 g) = 4.88 mW/g Maximum value of SAR (measured) = 13.9 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/09 System Check_H2450_120409 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450_0409 Medium parameters used: f = 2450 MHz; σ = 1.84 mho/m; ε r = 38.1; ρ = 1000 kg/m 3 Ambient Temperature：22.3 °C; Liquid Temperature：21.0 °C DASY4 Configuration: - Probe: EX3DV4 - SN3800; ConvF(6.71, 6.71, 6.71); Calibrated: 2011/08/05 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/06/24 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652 - Measurement SW: DASY4, V4.7 Build 80…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 4.1.0 Issued Date : Apr. 12, 2012 Report No. : SA120321C23 Revision : R01 Appendix B. SAR Plots of SAR Measurement The plots for SAR measurement are shown as follows. Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/01 P01 GSM850_Right Cheek_Ch251 DUT: 120321C23 Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8.3 Medium: H835_0401 Medium parameters used: f = 849 MHz; σ = 0.939 mho/m; ε r = 43; ρ = 1000 kg/m 3 Ambient Temperature：22.1 °C; Liquid Temperature：21.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.14, 10.14, 10.14); Calibrated: 2012/02/23 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch251/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.654 mW/g Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.55 V/m; Power Drift = -0.077 dB Peak SAR (extrapolated) = 0.700 W/kg SAR(1 g) = 0.568 mW/g; SAR(10 g) = 0.432 mW/g Maximum value of SAR (measured) = 0.650 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/01 P02 GSM850_Right Tilted_Ch251 DUT: 120321C23 Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8.3 Medium: H835_0401 Medium parameters used: f = 849 MHz; σ = 0.939 mho/m; ε r = 43; ρ = 1000 kg/m 3 Ambient Temperature：22.1 °C; Liquid Temperature：21.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.14, 10.14, 10.14); Calibrated: 2012/02/23 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch251/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.409 mW/g Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.9 V/m; Power Drift = -0.154 dB Peak SAR (extrapolated) = 0.439 W/kg SAR(1 g) = 0.353 mW/g; SAR(10 g) = 0.270 mW/g Maximum value of SAR (measured) = 0.399 mW/g Ch251/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.9 V/m; Power Drift = -0.154 dB Peak SAR (extrapolated) = 0.383 W/kg SAR(1 g) = 0.272 mW/g; SAR(10 g) = 0.180 mW/g Maximum value of SAR (measured) = 0.351 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/01 P03 GSM850_Left Cheek_Ch251 DUT: 120321C23 Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8.3 Medium: H835_0401 Medium parameters used: f = 849 MHz; σ = 0.939 mho/m; ε r = 43; ρ = 1000 kg/m 3 Ambient Temperature：22.1 °C; Liquid Temperature：21.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.14, 10.14, 10.14); Calibrated: 2012/02/23 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch251/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.797 mW/g Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.81 V/m; Power Drift = 0.081 dB Peak SAR (extrapolated) = 0.835 W/kg SAR(1 g) = 0.675 mW/g; SAR(10 g) = 0.511 mW/g Maximum value of SAR (measured) = 0.772 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/01 P04 GSM850_Left Tilted_Ch251 DUT: 120321C23 Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8.3 Medium: H835_0401 Medium parameters used: f = 849 MHz; σ = 0.939 mho/m; ε r = 43; ρ = 1000 kg/m 3 Ambient Temperature：22.1 °C; Liquid Temperature：21.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(10.14, 10.14, 10.14); Calibrated: 2012/02/23 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch251/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.413 mW/g Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.7 V/m; Power Drift = -0.165 dB Peak SAR (extrapolated) = 0.433 W/kg SAR(1 g) = 0.351 mW/g; SAR(10 g) = 0.269 mW/g Maximum value of SAR (measured) = 0.396 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/17 P70 GSM850_Left Cheek_Ch251_Battery2 DUT: 120321C23 Communication System: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8.3 Medium: H835_0417 Medium parameters used: f = 849 MHz; σ = 0.899 mho/m; ε r = 41.8; ρ = 1000 kg/m 3 Ambient Temperature：21.8 °C; Liquid Temperature：20.9 °C DASY4 Configuration: - Probe: EX3DV4 - SN3650; ConvF(8.87, 8.87, 8.87); Calibrated: 2011/10/26 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2011/07/29 - Phantom: SAM Phantom_Left; Type: SAM V4.0; Serial: TP 1652 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch251/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.755 mW/g Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.9 V/m; Power Drift = -0.091 dB Peak SAR (extrapolated) = 0.795 W/kg SAR(1 g) = 0.649 mW/g; SAR(10 g) = 0.496 mW/g Maximum value of SAR (measured) = 0.729 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/04/03 P26 GSM1900_Right Cheek_Ch810 DUT: 120321C23 Communication System: GSM1900; Frequency: 1909.8 MHz;Duty Cycle: 1:8.3 Medium: H1900_0403 Medium parameters used: f = 1910 MHz; σ = 1.4 mho/m; ε r = 39.8; ρ = 1000 kg/m …

Text truncated - open the document above for the full version.

Report No.: RF120321C23 1 Report Format Version 4.2.0 FCC TEST REPORT (PART 22) REPORT NO.: RF120321C23 MODEL NO.: F-11D FCC ID: HFS-IS3 RECEIVED: Mar. 21, 2012 TESTED: Apr. 28, 2012 ISSUED: May 08, 2012 APPLICANT: Quanta Computer Inc. ADDRESS: No. 211, Wen Hwa 2nd Road, Kuei Shan Hsiang Tao Yuan Hsien, Taiwan R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 33 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF120321C23 2 Report Format Version 4.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 3 1 CERTIFICATION .......................................................................................................................... 4 2 SUMMARY OF TEST RESULTS .................................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ............................................................................................... 5 2.2 TEST SITE AND INSTRUMENTS ................................................................................................ 6 3 GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 3.2 CONFIGURATION OF SYSTEM UNDER TEST .......................................................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................... 9 3.4 TEST ITEM AND TEST CONFIGURATION ............................................................................... 10 3.5 EUT OPERATING CONDITIONS ............................................................................................... 11 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 11 4 TEST TYPES AND RESULTS .................................................................................................... 12 4.1 OUTPUT POWER MEASUREMENT ......................................................................................... 12 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ...................................................................... 12 4.1.2 TEST PROCEDURES ................................................................................................................ 12 4.1.3 TEST SETUP .............................................................................................................................. 13 4.1.4 TEST RESULTS ......................................................................................................................... 14 4.2 FREQUENCY STABILITY MEAS…

Text truncated - open the document above for the full version.