HFSM3AWEBWLAN Module

Intel PRO/Wireless 2011B LAN & AC’97 Modem 3A Mini PCI Adapter Product Specification “Trilogy 3” MPCI Version 1.2 March 25 th , 2002 Trilogy 3 MPCI M3AWEB/56GA Product Specification The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document. Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copyright © 2002 Intel Corporation *Third-party brands and names are the property of their respective owners. Intel Confidential – Controlled Access Page 2 of 29 Trilogy 3 MPCI M3AWEB/56GA Product Specification Content: INTRODUCTION...............................................................................................................6 TRILOGY 3 PRODUCT OVERVIEW................................................................................6 DOCUMENT PURPOSE...................................................................................................6 KEY FEATURES..............................................................................................................6 WHAT’S NOT SUPPORTED............................................................................................7 REFERENCES..................................................................................................................7 Device Specifications.....................................................................................................7 External References........................................................................................................7 WLAN SYSTEM ARCHITECTURE..................................................................................8 WLAN BLOCK DIAGRAM...............................................................................................8 WLAN COMPONENT DESCRIPTIONS...........................................................................9 WLAN TRANSMITTER PATH..........................................................................................9 WLAN RECEIVE PATH....................................................................................................9 WLAN MICROPROCESSOR CONTROL.........................................................................9 WLAN FREQUENCY GENERATION.............................................................................10 WLAN HARDWARE ENVIRONMENT...........................................................................10 Overview........................................................................................................................10 Card Dimensions...........................................................................................................10 External Indicator Signaling.........................................................................................11 WLAN Operating Channels..........................................................................................11 Intel Confidential – Controlled Access Page 3 of 29 Trilogy 3 MPCI M3AWEB/56GA Product Specification WLAN Modulation and Channel Data Rates...............................................................12 WLAN Electrical Specifications...................................................................................12 WLAN POWER REQUIREMENTS.................................................................................12 MODEM SYSTEM ARCHITECTURE.............................................................................13 MODEM BLOCK DIAGRAM..........................................................................................13 MODEM HARDWARE ENVIRONMENT........................................................................14 Data Mode Capabilities.................................................................................................14 FAX Mode Capabilities.................................................................................................14 Modem Configuration...................................................................................................14 MODEM POWER REQUIREMENTS..............................................................................14 ENVIRONMENTAL PERFORMANCE............................................................................15 REGULATORY...............................................................................................................15 ETHERNET SOFTWARE DRIVER AND FEATURE SET..............................................16 Software Support..........................................................................................................16 Ethernet Features.......................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: HFSM3AWEB ADT No.910927R01 Modular Approval Request Letter Advance Data Technology Oct. 8, 2002 Dear Application Examiner, Quanta Computer Inc’s Wireless module, FCC ID: HFSM3AWEB, would like to have your authorization as a limited modular approval specific to the mobile device such as Notebook with antenna mounted around the LCD panel. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip ISL3874AIK. 3. “The modular transmitter must have its own power supply regulation.” The chips IF converter and RF/IF converter which will influence the frequency radiation, have to be 2.84V DC powered. The mini-pci interface provides 3.3VDC, so there are regulators in front of these chips, the part number of this regulator is MAX8867. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a PCI to mini-PCI extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: HFSM3AWEB ADT No.910927R01 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention.

Page 1 ANNEX PHOTOGRAPHS OF EUT Page 2

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17

Page 18 Page 19 Page 20 Page 21 Page 22 Page 23

D D 1 2 3 4 5 6 7 ABCE 7 6 5 4 3 2 1 ECBA LTR NAME MODEL MATERIAL FINISH DATE SCALE UNIT MM DWG. NO. APPROVED DESIGNED DRAWN REV 3A TOL. + - 1 PLC2 PLCANGLE 7F, 116 HOU KANG ST. SHIN LIN, TAIPEI, TAIWAN, R.O.C. ITEMDESCRIPTION REVISIONS DESCRIPTION DATEAPP THE 3RD PROJECTION PART NO. Quanta Computer Inc. 2 1 3 FIRST RELEASE RITA S/N HCYA1007 1/1 HCYA1007010 91.09.30 91.09.30 Ya1a SYSTEM LABEL 3A Rita 0.1 104.0 6 9 . 3 MODEL No.: 600YG2 received, including interference that may cause undesired operation. Materiel brouilieur du Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following (1) this device may not cause harmful interference. and (2) this device must Cet appareil numerique de la classe B respecte toutes les exigences du Reglement Regulations. This class B digital apparatus meets all requirements of the Canadian interference- FOR USE WITH SA80T-3115 OR ADP-80CB POUR UTILSER AVEC MODEL SA80T-3115 OR ADP-80CB INPUT:19V 4.2A --- Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098 and viewing uses only. 3B TH10 CM P/N.: Causing Equipment sur le two conditions: accept any interference C3.23 3009615 CONFORMS TO ANSI/UL STD.1950 CERTIFIED TO CAN/CSA STD C22.2 NO.950 4,907,093 licensed for limited Fitted with internal Askey Computer Corp. REN:0.0B US:H8NM500BL1V-1INT modem model number 1456VQL1V-1(INT) Complies with 47 CFR part 68 8 . 0 40.0 Assembled in Taiwan 18x3MM 22.3X8mm Assembled in Taiwan A B C D LABEL A LABEL B LABEL C LABEL D FCC ID:HFSM3AWEB IC:1787B-M3AWEB Contains IEEE 802.11B RLan Card FCC ID:HFSM3AWEB IC:1787B-M3AWEB Contains IEEE 802.11B RLan Card MODEL No.: 600YG2 received, including interference that may cause undesired operation. Materiel brouilieur du Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following (1) this device may not cause harmful interference. and (2) this device must Cet appareil numerique de la classe B respecte toutes les exigences du Reglement Regulations. This class B digital apparatus meets all requirements of the Canadian interference- FOR USE WITH SA80T-3115 OR ADP-80CB POUR UTILSER AVEC MODEL SA80T-3115 OR ADP-80CB INPUT:19V 4.2A --- Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098 and viewing uses only. TH10 CM P/N.: Causing Equipment sur le two conditions: accept any interference 3009615 CONFORMS TO ANSI/UL STD.1950 CERTIFIED TO CAN/CSA STD C22.2 NO.950 4,907,093 licensed for limited Fitted with internal Askey Computer Corp. REN:0.0B US:H8NM500BL1V-1INT modem model number 1456VQL1V-1(INT) Complies with 47 CFR part 68

FCC ID: HFSM3AWEB ADT No.910927R01 Operational Description The transmitter of the EUT, Wireless module (MiniPCI), is powered by mini-PCI interface. The antennas are PIFA and Printed Dipole Antennas, and the antenna connector type is UFL. Under normal use condition, the user has to keep at least 20cm separation distance between radiator and the body of the user. This project is seeking the authorization of limited module approval specific to the mobile device such as Notebook with antenna mounted around the LCD panel. The other instruction, please have a look at the users manual. DSSS Information This device is Direct Sequence Spread Spectrum, the data is mixed by pseudorandom code which is an orthogonal code. The mixed data is digital modulated by BPSK and QPSK technique depends on the data rates. The CCK coding is applied for increasing the data rate, and also the processing gain will be increased. The bit rates are 1,2,5.5,11Mbps, the symbol rates are 1,1,1.375,1.375Mbps, the chip rates are always 11Mbps. So, the Chip/symbol is 11,11,8 and 8 respectively. Although is higher bit rate, the processing gain is lower than 10, but the CCK coding used in higher bit rate will provide 2.2dB coding gain.

FCC ID: HFSM3AWEB ADT No.: 910927R01 FCC TEST REPORT REPORT NO.: RF910927R01 MODEL NO.: Trilogy III ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT:QUANTA COMPUTER INC. ADDRESS:7F, No. 116, Hou Kang St., Shih Lin, Taipei, Taiwan, R.O.C. ISSUED BY:Advance Data Technology Corporation LAB LOCATION:47 14th Lin, Chiapau Tsun, Linko, Taipei, Taiwan, R.O.C. 0528 ILAC MRA Lab Code: 200102-0 FCC ID: HFSM3AWEB ADT No.: 910927R01 RF Exposure Measurement (Mobile Device) 1. Introduction 2.4 GHz frequency band is regarded specially as a dangerous band for its heating harmfulness to the human body. That’s why microwave oven is operating in this frequency band. The manufacturer whose product is working in this frequency band is obligatory to prove the harmfulness of his product. In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC), and the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. 2. Classification The antenna of the product, under normal use condition, is at least 20 cm away from the body of the user. Warning statement for keeping 20cm separation distance and the prohibition of operating next to a person has been printed on the users manual. So, this product is classified as the Mobile Device. 3. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b). FCC ID: HFSM3AWEB ADT No.: 910927R01 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (A)Limits For Occupational / Control Exposures 30-30061.40.1631.06 300-1500......F/3006 1500-100,000......56 (B)Limits For General Population / Uncontrolled Exposure 30-30027.50.0730.230 300-1500......F/150030 1500-100,000......1.030 F = Frequency in MHz 4. Friis Formula Friis transmission formula : Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1 mW/cm 2 . If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 5. EUT Operating condition The software provided by Manufacturer enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. FCC ID: HFSM3AWEB ADT No.: 910927R01 6. Test Results 6.1 Antenna Gain The maximum Gain measured in Fully Anechoic Chamber is 4dBi or 2.51 (numeric). 6.2 Output Power Into Antenna & RF Exposure Distance : CHANNEL CHANNEL FREQUENCY (MHz) OUTPUT POWER TO ANTENNA (mW) MINIMUM ALLOWABLE DISTANCE ( r ) FROM SKIN (Centi-Meter) 1241231.922.53 6243731.122.49 11246231.922.53 The minimum allowable distance is very close to the enclosure of the antenna and is very far away from the human being under normal use condition.

FCC ID: HFSM3AWEB Report No.: RF910927R01 1 Issued: Oct. 8, 2002 FCC TEST REPORT REPORT NO.: RF910927R01 MODEL NO.: Trilogy III RECEIVED: Sept. 27, 2002 TESTED: Sept. 28 ~ Oct. 5, 2002 APPLICANT:QUANTA COMPUTER INC. ADDRESS:7F, No. 116, Hou Kang St., Shih Lin, Taipei, Taiwan, R.O.C. ISSUED BY:Advance Data Technology Corporation LAB LOCATION:47 14th Lin, Chiapau Tsun, Linko, Taipei, Taiwan, R.O.C. This test report consists of 62 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, NVLAP or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA Lab Code: 200102-0 FCC ID: HFSM3AWEB Report No.: RF910927R01 2 Issued: Oct. 8, 2002 Table of Contents 1CERTIFICATION ........................................................................................... 4 2SUMMARY OF TEST RESULTS................................................................... 5 3GENERAL INFORMATION ........................................................................... 6 3.1GENERAL DESCRIPTION OF EUT ............................................................. 6 3.2DESCRIPTION OF TEST MODES ............................................................... 7 3.3GENERAL DESCRIPTION OF APPLIED STANDARDS............................... 7 3.4DESCRIPTION OF SUPPORT UNITS.......................................................... 8 4TEST TYPES AND RESULTS ...................................................................... 9 4.1CONDUCTED EMISSION MEASUREMENT ................................................ 9 4.1.1LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................. 9 4.1.2TEST INSTRUMENTS .................................................................................. 9 4.1.3TEST PROCEDURES................................................................................. 10 4.1.4DEVIATION FROM TEST STANDARD ....................................................... 10 4.1.5TEST SETUP ...............................................................................................11 4.1.6EUT OPERATING CONDITIONS.................................................................11 4.1.7TEST RESULTS.......................................................................................... 12 4.2RADIATED EMISSION MEASUREMENT ................................................... 18 4.2.1LIMITS OF RADIATED EMISSION MEASUREMENT ................................ 18 4.2.2TEST INSTRUMENTS ................................................................................ 19 4.2.3TEST PROCEDURES................................................................................. 20 4.2.4DEVIATION FROM TEST STANDARD ....................................................... 20 4.2.5TEST SETUP .............................................................................................. 21 4.2.6EUT OPERATING CONDITIONS................................................................ 21 4.2.7TEST RESULTS (A) .................................................................................... 22 4.2.8TEST RESULTS (B) .................................................................................... 26 4.2.9TEST RESULTS (C).................................................................................... 30 4.2.10 TEST RESULTS (D).................................................................................... 34 4.36dB BANDWIDTH MEASUREMENT .......................................................... 38 4.3.1LIMITS OF 6dB BANDWIDTH MEASUREMENT........................................ 38 4.3.2TEST INSTRUMENTS ................................................................................ 38 4.3.3TEST PROCEDURE ................................................................................... 39 4.3.4DEVIATION FROM TEST STANDARD ....................................................... 39 4.3.5TEST SETUP .............................................................................................. 39 4.3.6EUT OPERATING CONDITIONS................................................................ 39 4.3.7TEST RESULTS.......................................................................................... 40 FCC ID: HFSM3AWEB Report No.: RF910927R01 3 Issued: Oct. 8, 2002 4.4MAXIMUM PEAK OUTPUT POWER .......................................................... 44 4.4.1LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT ........... 44 4.4.2TEST INSTRUMENTS ................................................................................ 44 4.4.3TEST PROCEDURES................................................................................. 45 4.4.4DEVIATION FROM TEST STANDARD ....................................................... 45 4.4.5TEST SETUP .............................................................................................. 45 4.4.6EUT OPERATING CONDITIONS................................................................ 45 4.4.7TEST RESULTS.......................................................................................... 46 4.5POWER SPECTRAL DENSITY MEASUREMENT ..................................... 47 4.5.1LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ................... 47 4.5.2TEST INSTRUMENTS ................................................................................ 47 4.5.3TEST PROCEDURE ................................................................................... 48 4.5.4DEVIATION FROM TEST STANDARD ....................................................... 48 4.5.5TEST SETUP .............................................................................................. 48 4.5.6EUT OPERATING CONDITIONS................................................................ 48 4.5.7TEST RESULTS.......................................................................................…

Text truncated - open the document above for the full version.

FCC ID: HFSM3AWEB Report No.: RF910927R01 58 Issued: Oct. 8, 2002 5 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST FCC ID: HFSM3AWEB Report No.: RF910927R01 59 Issued: Oct. 8, 2002 FCC ID: HFSM3AWEB Report No.: RF910927R01 60 Issued: Oct. 8, 2002 RADIATED EMISSION TEST FCC ID: HFSM3AWEB Report No.: RF910927R01 61 Issued: Oct. 8, 2002