HLEMT20MIFARE01A Versatile Multi-Function Terminal

Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Intercom & Access Control Terminal MT200 -CME0AG Quick Reference Guide 400723G Version 1.0 1 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. About This Manual This manual explains how to install, operate and maintain the MT200 -CME0AG Intercom & Access Control Terminal. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from the manufacturer, which includes photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. © Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech TASHI Web site: http:\\www.unitech-sbd.com Unitech Global Web site: http:\\www.unitech-adc.com Regulatory Compliance Statements FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following: ¾ Relocate the receiving antenna. ¾ Increase the separation between the equipment and receiver. ¾ Connect the equipment into an outlet on a circuit that is different from the receiver. ¾ Consult the dealer or an experienced radio/television technician for help. 2 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Canadian Compliance Statement Industry Canada Notice Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. European Conformity Statement Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/ EEC directives. RoHS Statement This device conforms to RoHS (Restriction of Hazardous Substances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. 3 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Taiwan NCC Warning Statement 根據NCC低功率電波輻射性電機管理辦法 規定: 第十二條 經型式認證合格之低功率射頻電機，非經許 可，公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干 擾合法通信；經發現有干擾現象時，應立即停 用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電 通信。 低功率射頻電機須忍受合法通信或工業、科學 及醫療用電波輻射性電機設備之干擾。 Warranty The following items are covered under Unitech Limited Warranty: z MT200-CMEOAG Intercom & Access Control Terminal -- 1-year limited warranty. z Cables -- three-month limited warranty. 4 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Contents of Package After Opening the box, ensure that the following items are present. MiFare Card (Optional) MT200-CME0AG Model Power Adapter (Optional) Terminal Block Plug Unitech CD-ROM (User Manual / Quick Reference Guide) If there is a shortage of parts or if there are defective parts, please contact regional sales representatives. 5 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Front View Rear View Speaker Microphone LED Indicator 2.0 Megapixel CMOS Camera Touch Sensor MiFare Scan Sensor Terminal Block Female Socket DC Input Jack Ethernet Port Mini USB Port (Client) 6 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Using Terminal Block MT200-CME0AG is designed with a 12-pin terminal block for input/output signals. To install the 12-pin block, refer to the instruction made below. 1. Insert the stripped ends of the wires respectively into terminal block sockets of the male plug (see the illustration made below), and then tighten the lock screw to secure the wire. 2. Then, insert the terminal block plug into the female socket of MT200-CME0AG. 7 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Terminal Block Pin Assignment Pin Name Description 1 (N/A) (N/A) 2 (N/A) (N/A) 3 D1+ Input Anode (+) 4 D1- Input Cathode (-) 5 RS485+ RS485, Positive 6 RS485- RS485, Negative 7 R1-C Common 8 R1-NO Normal Open 9 R1-NC Normal Close 10 (N/A) (N/A) 11 12 Vin DC IN 12V 12 GND GND Relay Output RL1-CTRL→High R1 (C & NO Linked) RL1-CTRL→Low R1 (C & NC Linked) Digit Input D1+ and D1- are the positive and negative terminals of the external power input. D1 = High Digit input1 = High D1 = Low Digit input1 = Low 8 Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Using MT200-CME0AG MT200-CME0AG is easy for users and visitors respectively to open the door and call the house owner to open the door. Using Mifare card for access control MT200-CME0AG is featured with a MiFare scan sensor compatible with the Mifare card. Thus, you may keep the card near the black sensor area at the distance of approximately 4cm to make MT200-CME0AG read the card data. After reading the right data, MT200-CME0AG will drive the door to open. Touc…

Text truncated - open the document above for the full version.

CERTIFICATE Report No.: NEI-FCCE-1-R0911001 Issued Date: May 17, 2010 RV-1005013 Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the Neutron EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment A versatile Multi-Function Terminal Model Name MT200-CME0AG; MT200 Brand Name unitech Applicant unitech electronics co., ltd. Address 5F, No. 136, Lane 235, Pao-Chiao Rd., Hsin-Tien City, Taipei Hsien, Taiwan Measurement ANSI C 63.4 (2003) Method CISPR 22: 2005 +A1: 2005 ICES-003: 2004 The test data, data evaluation, and equipment configuration contained in our test report (Report No. NEI-FCCE-1-R0911001) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory Neutron Engineering Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331

RV-1005013 Project No.: R0911001 Page 2 of 13 Neutron Engineering Inc. R0911001 RV-1005013 Project No.: R0911001 Page 3 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-1005013 Project No.: R0911001 Page 12 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-1005013 Project No.: R0911001 Page 13 of 13 Neutron Engineering Inc. R0911001

50mm 30mm Unit label
   ,    

RV-0000000 Project No.: R0911001 Page 4 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-0000000 Project No.: R0911001 Page 5 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-0000000 Project No.: R0911001 Page 6 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-0000000 Project No.: R0911001 Page 7 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-0000000 Project No.: R0911001 Page 8 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-0000000 Project No.: R0911001 Page 9 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-0000000 Project No.: R0911001 Page 10 of 13 Neutron Engineering Inc. R0911001 R0911001 RV-0000000 Project No.: R0911001 Page 11 of 13 Neutron Engineering Inc. R0911001 R0911001

Report No.: NEI-FCCP-1-R0911001 Page 1 of 2 8 Neutron Engineering Inc. RV-1005013 Radio Test Report FCC ID: HLEMT20MIFARE01 This report concerns (check one) : Original Grant Class II Change Issued Date : May 17, 2010 Project No. : R0911001 Equipment : A versatile Multi-Function Terminal Model Name : MT200-CME0AG; MT200 Applicant : unitech electronics co., ltd. 5F, No. 136, Lane 235, Pao-Chiao Rd., Hsin-Tien City, Taipei Hsien, Taiwan Tested by: Neutron Engineering Inc. EMC Laboratory Date of Test: Dec. 14, 2009 ~ Dec. 31, 2009 Testing Engineer : (Rush Kao) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) Neutron Engineering Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331 Report No.: NEI-FCCP-1-R0911001 Page 2 of 2 8 Neutron Engineering Inc. RV-1005013 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: NEI-FCCP-1-R0911001 Page 3 of 2 8 Neutron Engineering Inc. RV-1005013 Table of Contents Page 1 . CERTIFICATION 4 2 . SUMMARY OF TEST RESULTS 5 2.1 TEST FACILITY 6 2.2 MEASUREMENT UNCERTAINTY 6 3 . GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 8 3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 3.4 DESCRIPTION OF SUPPORT UNITS 10 4 . EMC EMISSION TEST 11 4.1 CONDUCTED EMISSION MEASUREMENT 11 4.1.1 POWER LINE CONDUCTED EMISSION 11 4.1.2 MEASUREMENT INSTRUMENTS LIST 11 4.1.3 TEST PROCEDURE 12 4.1.4 DEVIATION FROM TEST STANDARD 12 4.1.5 TEST SETUP 12 4.1.6 EUT OPERATING CONDITIONS 13 4.1.7 TEST RESULTS 14 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 MEASUREMENT INSTRUMENTS LIST 17 4.2.3 TEST PROCEDURE 17 4.2.4 DEVIATION FROM TEST STANDARD 17 4.2.5 TEST SETUP 18 4.2.6 EUT OPERATING CONDITIONS 18 4.2.7 TEST RESULTS- FCC PART 15.209 19 4.2.8 TEST RESULTS- FCC PART 15.225 23 4.3 FREQUENCY STABILITY MEASUREMENT 25 4.3.1 FREQUENCY STABILITY LIMITS 25 4.3.2 MEASUREMENT INSTRUMENTS LIST 25 4.3.3 TEST PROCEDURE 25 4.3.4 DEVIATION FROM TEST STANDARD 25 4.3.5 EUT OPERATING CONDITIONS 25 4.3.6 TEST RESULTS 26 5 . EUT TEST PHOTO 27 Report No.: NEI-FCCP-1-R0911001 Page 4 of 2 8 Neutron Engineering Inc. RV-1005013 1. CERTIFICATION E q u i p m e n t : A versatile Multi-Function Terminal Brand Name : unitech Model Name : MT200-CME0AG; MT200 A p p l i c a n t : unitech electronics co., ltd. Date of Test : Dec. 14, 2009 ~ Dec. 31, 2009 Standards : FCC Part15, Subpart C ANCI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-R0911001) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: NEI-FCCP-1-R0911001 Page 5 of 2 8 Neutron Engineering Inc. RV-1005013 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: (Antenna to EUT distance is 3 m) FCC Part15, Subpart C Standard Test Item Remark 15.207 Conducted Emission PASS 15.35 / 15.205 / 15.209 / 15.225 Radiated Emission PASS 15.225(e) Frequency Stability PASS 15.203 Antenna Requirement PASS NOTE: (1) ” N/A” denotes test is not applicable in this Test Report. Report No.: NEI-FCCP-1-R0911001 Page 6 of 2 8 Neutron Engineering Inc. RV-1005013 2.1 TEST FACILITY The test facilities used to collect the test data in this report is C01/CB08(FCC R.N.: 614388) at the location of No.132-1, Lane 329, Sec. 2, Palain Road, Shijr City, Taipei, Taiwan. 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95%。 The measurement instrumentation uncertainty considerations contained in CISPR 16-4-2. A. Conducted Measurement : Test Site Method Measurement Frequency Range U，(dB) NOTE C01 ANSI150 KHz ~ 30MHz 1.94 B. Radiated Measurement : Test Site Method Measurement Frequency Range Ant. H / V U，(dB) NOTE 30MHz ~ 200MHz V 2.86 30MHz ~ 200MHz H 2.56 200MHz ~ 1,000MHz V 2.88 OS-01 ANSI 200MHz ~ 1,000MHz H 2.98 30MHz ~ 200MHz V 2.48 30MHz ~ 200MHz H 2.16 200MHz ~ 1,000MHz V 2.50 OS-02 ANSI 200MHz ~ 1,000MHz H 2.66 Our calculated Measurement Instrumentation Uncertainty is shown in the tables above. These are our U lab values in CI…

Text truncated - open the document above for the full version.

Report No.: NEI-FCCP-1-R0911001 Page 27 of 2 8 Neutron Engineering Inc. 5. EUT TEST PHOTO Conducted Measurement Photos Report No.: NEI-FCCP-1-R0911001 Page 28 of 2 8 Neutron Engineering Inc. Radiated Measurement Photos