HLEPA700BTNFPRugged Handheld Computer

PA700 Rugged Handheld Computer User’s Manual Version 1.0 Table of content Table of content..............................................................................................2 1. Package Contents......................................................................................3 2. Getting started ...........................................................................................4 2.1 Device overview ...................................................................................4 2.2 Assembly ..............................................................................................6 Accessing battery, Micro SD card and SIM card.....................................6 2.3 Charging the battery .............................................................................7 2.4 Data Communicating with PC Device...................................................8 2.5 LED status............................................................................................9 2.6 To check the battery level and to access the battery usage menu .......9 3. Basic Operation ....................................................................................... 11 3.1 Accessing and using applications....................................................... 11 To open the Application screen ............................................................. 11 To browse the Application screen ......................................................... 11 To create a shortcut to an application on the Home screen .................. 11 To Remove a shortcut of an application on the Home screen...............12 Calling ......................................................................................................12 Call handling .........................................................................................12 To make a call by dialing.......................................................................12 To end a call .........................................................................................12 3.2 Barcode Scanning (For Imager Version only).....................................12 3.3 RFID Sensing .....................................................................................13 4. Specification.............................................................................................15 Camera and Flash Light .......................................................................15 Appendix Worldwide Support.......................................................................17 1. Package Contents PA700 USB cable (Standard USB to Micro USB) Charger Battery Power Plug Adapter Hand Strap Utility DVD 2. Getting started Unitech PA700 is an Android platform device. Android platform device has great flexibility that allows you to make customized configurations and enhancements by install and remove Apps. With Android operation system, your device has limitless possibilities to update to latest features and improvements. 2.1 Device overview 1. Receiver 7. Back button 2. LED indicator 8. Flash LED 3. Search button 9. 5M Camera with AF 4. Microphone. 10. Reset button 5. Menu button 11. Mounting screw for battery cover 6. Home screen button 12. Receiver 13. Bar code Scan Engine 15. Volume Down button 14. Scan button 16. Volume Up button 17. Micro USB port 19. Power button 18. Phone jack 20. Scan button 2.2 Assembly Accessing battery, Micro SD card and SIM card 1. Using a proper tool (ex. a coin) to loosen the two screws on the battery cover by turning anticlockwise. 2. Remove the back cover and pull the battery out. 3. Now you can access the micro SD card slot and SIM card slot. 1. Micro SD card slot 2. SIM card slot Put battery back to PA700 1. Using a proper tool (ex. a coin) to loosen the two screws on the battery cover by turning clockwise. 2. Put battery into battery compartment and put back cover . 2.3 Charging the battery Connect PA700 to the charger, it will be charged automatically. 1. Connect the standard USB connector to the charger. 2. Connect the micro USB connector to the micro USB port at the bottom. 3. Plug the AC charger into a wall outlet. If needed, attach a plug converter onto the AC charger. 2.4 Data Communicating with PC Device 1. Connect the standard USB connector to the USB port of the PC device. 2. Connect the micro USB connector to the micro USB port at the bottom. 2.5 LED status Green The battery is fully charged Lights Red The battery is charging. The battery level is between low and full Blue Message is received. 2.6 To check the battery level and to access the battery usage menu 1 From your Home screen, tap . 2 Find and tap Settings. 3 Find and tap Battery. 3. Basic Operation 3.1 Accessing and using applications To open the Application screen From your Home screen, tap . To browse the Application screen From the Application screen, flick right or left. To create a shortcut to an application on the Home screen 1 From your Home screen, tap . 2 Touch and hold an application icon and then the Home screen opens. 3 Drag the icon to the desired page on the Home screen by flicking left or rught, then release your finger. To Remove a shortcut of an application on the Home screen 1 From your Home screen, touch and hold the icon of the desired application you want to remove 2 “X Remove” shows on the top of the home screen. 3 Drag the icon to be removed to the “X Remove”. Calling Call handling To make a call by dialing 1 From your Home screen, tap . 2 Find and tap Phone. 3 Enter the number of the recipient and tap Call. To delete a number, tap . To end a call • Tap . 3.2 Barcode Scanning (For Imager Version only) 1. Tap the ScanService . 2. Aim the Bar code Scan Engine to the barcode and press one of two scan buttons. 3.3 RFID Sensing 1. Tap the NFC Reader . 4. Specification System Features CPU TI OMAP 4470 1.5Ghz Dual Core Processor Memory 1GB Mobile DDR RAM 8GB eMMC Flash OS Android 4.1.1 Jelly Bean Languages support English, Simp. Chinese, Trad…

Text truncated - open the document above for the full version.

Report No.: 130826C29A Reference No.: 130826C28, 141111C21 1 CONSTRUCTION PHOTOS OF EUT Report No.: 130826C29A Reference No.: 130826C28, 141111C21 2 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 3

FCC ID: HLEPA700BTNFP Back of the Device Battery Compartment Label Location

Report No.: 130826C29A Reference No.: 130826C28, 141111C21 1 CONSTRUCTION PHOTOS OF EUT Report No.: 130826C29A Reference No.: 130826C28, 141111C21 2 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 3 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 4 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 5 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 6 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 7 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 8 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 9 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 10 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 11 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 12 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 13 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 14 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 15 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 16 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 17 Report No.: 130826C29A Reference No.: 130826C28, 141111C21 18

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 32 Report No. : SA130826C29A Issued Date : Dec. 18, 2014 Reference No.: 141111C21 FCC SAR Test Report Report No. : SA130826C29A Applicant : unitech Electronics co., Ltd. Address : 5F., No.136, Lane 235, Pao-Chiao Rd., Hsin-Tien Dist, New Taipei City, Taiwan 231, R.O.C. Product : Rugged Handheld Computer FCC ID : HLEPA700BTNFP Brand : unitech Model No. : PA700 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 248227 D01 v01r02 KDB 447498 D01 v05r02 / KDB 648474 D04 v01r02 / KDB 941225 D01 v02 KDB 941225 D02 v02r02 / KDB 941225 D03 v01 Sample Received Date : Sep. 10, 2013 Date of Testing : Sep. 10, 2013 ~ Dec. 18, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 32 Report No. : SA130826C29A Issued Date : Dec. 18, 2014 Reference No.: 141111C21 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Ev…

Text truncated - open the document above for the full version.

Report No.: RF130826C29A-4 1 of 34 Report Format Version 5.0.0 Reference No.: 141111C21 FCC TEST REPORT (NFC) REPORT NO.: RF130826C29A-4 MODEL NO.: PA700 FCC ID: HLEPA700BTNFP RECEIVED: Aug. 26, 2013 TESTED: Sep. 05, 2013 ~ Sep. 19, 2013 ISSUED: Dec. 11, 2013 APPLICANT: unitech Electronics co., Ltd. ADDRESS: 5F., No.136, Lane 235, Pao-Chiao Rd., Hsin-Tien Dist, New Taipei City, Taiwan 231, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130826C29A-4 2 of 34 Report Format Version 5.0.0 Reference No.: 141111C21 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION ........................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 6 3. GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 7 3.2 DESCRIPTION OF TEST MODES.......................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................................ 8 3.3 DESCRIPTION OF SUPPORT UNITS .................................................................... 9 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................................... 9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 10 4. TEST TYPES AND RESULTS .................................................................................................... 11 4.1 Radiated Emission Measurement ......................................................................... 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ......................................................... 11 4.1.2 TEST INSTRUMENTS ......................................................................................................... 12 4.1.3 TEST PROCEDURES .......................................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ................................................................................ 13 4.1.5 TEST SETUP ....................................................................................................................... 14 4.1.6 EUT OPERATING CONDITIONS ......................................................................................... 14 4.1.7 TEST RESULTS ................................................................................................................... 15 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 21 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .................................................... 21 4.2.2 TEST INSTRUMENTS ......................................................................................................... 21 4.2.3 TEST PROCEDURES .......................................................................................................... 22 4.2.4 DEVIATION FROM TEST STANDARD ................................................................................ 22 4.2.5 TEST SETUP ....................................................................................................................... 22 4.2.6 EUT OPERATING CONDITIONS ......................................................................................... 22 4.2.7 TEST RESULTS ................................................................................................................... 23 4.3 FREQUENCY STABILITY ..................................................................................... 27 4.3.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT .................................................... 27 4.3.2 TEST INSTRUMENTS ......................................................................................................... 27 4.3.3 TEST PROCEDURE ........................................................…

Text truncated - open the document above for the full version.

Report No.: RF130826C29A-2 1 of 68 Report Format Version 5.2.0 Reference No.: 141111C21 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF130826C29A-2 MODEL NO.: PA700 FCC ID: HLEPA700BTNFP RECEIVED: Aug. 26, 2013 TESTED: Sep. 10, 2013 ~ Sep. 19, 2013 ISSUED: Dec. 11, 2013 APPLICANT: unitech Electronics co., Ltd. ADDRESS: 5F., No.136, Lane 235, Pao-Chiao Rd., Hsin-Tien Dist, New Taipei City, Taiwan 231, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130826C29A-2 2 of 68 Report Format Version 5.2.0 Reference No.: 141111C21 Table of Contents RELEASE CONTROL RECORD ......................................................................................................... 5 1. CERTIFICATION ...................................................................................................................... 6 2. SUMMARY OF TEST RESULTS ............................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 8 3. GENERAL INFORMATION ...................................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................ 9 3.2 DESCRIPTION OF TEST MODES ........................................................................................ 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................................... 14 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................................. 15 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................................... 15 4. TEST TYPES AND RESULTS (FOR Bluetooth EDR) ........................................................... 16 4.1 Radiated Emission AND BANDEDGE Measurement ............................................................ 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................. 16 4.1.2 TEST INSTRUMENTS ........................................................................................................... 17 4.1.3 TEST PROCEDURES ........................................................................................................... 18 4.1.4 DEVIATION FROM TEST STANDARD ................................................................................. 18 4.1.5 TEST SETUP ......................................................................................................................... 19 4.1.6 EUT OPERATING CONDITIONS .......................................................................................... 19 4.1.7 TEST RESULTS..................................................................................................................... 20 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................ 24 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..................................................... 24 4.2.2 TEST INSTRUMENTS ........................................................................................................... 24 4.2.3 TEST PROCEDURES ........................................................................................................... 25 4.2.4 DEVIATION FROM TEST STANDARD ................................................................................. 25 4.2.5 TEST SETUP ......................................................................................................................... 26 4.2.6 EUT OPERATING CONDITIONS .......................................................................................... 26 4.2.7 TEST RESULTS..................................................................................................................... 27 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................................... 31 4.3.1 LIMIT OF HOPPING FREQUENCY USED ........................................................................... 31 4.3.2 TEST SETUP ......................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF130826C29A-3 1 of 48 Report Format Version 5.0.0 Reference No.: 141111C21 FCC TEST REPORT (15.247) REPORT NO.: RF130826C29A-3 MODEL NO.: PA700 FCC ID: HLEPA700BTNFP RECEIVED: Aug. 26, 2013 TESTED: Sep. 09, 2013 ~ Sep. 19, 2013 ISSUED: Dec. 11, 2014 APPLICANT: unitech Electronics co., Ltd. ADDRESS: 5F., No.136, Lane 235, Pao-Chiao Rd., Hsin-Tien Dist, New Taipei City, Taiwan 231, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130826C29A-3 2 of 48 Report Format Version 5.0.0 Reference No.: 141111C21 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION ..........................................................................................................................5 2. SUMMARY OF TEST RESULTS .................................................................................................6 2.1 MEASUREMENT UNCERTAINTY ................................................................... 6 3. GENERAL INFORMATION ..........................................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................. 8 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................... 10 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 10 4. TEST TYPES AND RESULTS ................................................................................................... 11 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 11 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................... 11 4.1.2 TEST INSTRUMENTS .................................................................................................. 12 4.1.3 TEST PROCEDURES ................................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ......................................................................... 13 4.1.5 TEST SETUP ................................................................................................................ 14 4.1.6 EUT OPERATING CONDITIONS ................................................................................. 14 4.1.7 TEST RESULTS ............................................................................................................ 15 4.2 CONDUCTED EMISSION MEASUREMENT ................................................. 25 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..................…

Text truncated - open the document above for the full version.