I4S-BTS535Bluetooth speaker

BTS 5.35 BLUETOOTH SPEAKER Wireless A2DP Bluetooth Stereo-Music Streaming FCC Compliancy Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, that may cause undesired operation. Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the user’s authority to use the equipment. Note - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS • 39305 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com • 80305782 • ©2012 FCC ID:I4S-BTS535 IC :3642B-BTS535 FCC Compliancy Statement CAN ICES-3 (B)/NMB-3(B) IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electrical products, basic cautions should always be followed, including the following: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 8. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 9. This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus. 10. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: Duration Per Day In Hours Sound Level dBA, Slow Response 8 90 6 92 4 95 3 97 2 100 1 1⁄2 102 1 105 1⁄2 110 1⁄4 or less 115 According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation. SAVE THESE INSTRUCTIONS! BTS 5.35 BLUETOOTH SPEAKER FEATURES • Wireless stereo speaker for connection with your mobile phone, PC, notebook or any Bluetooth-enabled stereo device. • Wireless A2DP - Bluetooth stereo-music streaming. • Supports AFHSS / AVRCP / Class II (10~30 meters). • One-to-One paring protects listening privacy. • Compatible with all Bluetooth-enabled stereo smart phones. • Compatible with any brand of stereo-Bluetooth-enabled notebook. • Compatible with any PC via Bluetooth. • Audio Source: Wireless and wired • Powerful 5” subwoofer • Long throw bass effect supports movie-watching with encoded DTS / Dolby / THX home-theatre sound. • RMS 30W, max power 50W Content • Wireless Bluetooth speaker • 3.5 mm jack-in cable • Manual Dolby is a registered trademark of Dolby Laboratories. BTS 5.35 BLUETOOTH SPEAKER OPERATION WIRED MODE: Put mode switch to Wired mode. Connect audio source’s output to the 3.5 mm audio jack or stereo RCA audio inputs. Adjust the volume and tone knobs according to taste. WIRELESS MODE: Put mode switch to Wireless mode. Enable your Bluetooth device and select Device ID “BTS 5.35” If Bluetooth device is asking for a password, use “0000”. Speaker will “beep” when connected to Bluetooth device. Adjust the volume and tone knobs according to taste. Wired/ Wireless Switch 3.5 mm Audio In RCA Stereo Input “On” Indicator Treble Volume Bass RCA Stereo Output Power Switch Antenna PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: 06/01/2012 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purcha…

Text truncated - open the document above for the full version.

Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC EUT View 3 EUT View 4 Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC EUT View 5 EUT View 6

Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC EXHIBIT 1- PRODUCT LABELING Proposed FCC ID and IC Label Format Bluetooth Speaker Model: BTS 5.35 FCC ID: I4S-BT535 IC: 3624B-BTS535 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Peavey Electronics Corporation Specifications : Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT Label Location

Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC EUT Housing and Board View 3 Solder Board-Component View 1 Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC Solder Board-Component View 2 Solder Board-Component View 3 Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC Solder Board-Component View 4 Solder Board-Component View 5 Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC Solder Board-Component View 6

Peavey Electronics Corporation Model: BTS 5.35 REPORT NO.: STR12108201I PAGE 1 OF 55 FCC PART 15.247 & RSS-210 FCC & IC Measurement and Test Report For Peavey Electronics Corporation 5022 Hartley Peavey Drive, Meridian, MS.39305, USA 1763 Keloka Drive Kelowna, BC V1Z 2Y3, Canada FCC ID: I4S-BTS535 IC: 3642B-BTS535 FCC Rules: FCC Part 15.247 RSS-210 Issue 8 Product Description: Bluetooth Speaker Tested Model: BTS 5.35 Report No.: STR12108201I Tested Date: 2012-10-24 to 2013-01-08 Issued Date: 2013-01-10 Tested By: Vigoss Xiong / Engineer Reviewed By: Lahm Peng / EMC Manager Approved & Authorized By: Jandy so / PSQ Manager Prepared By: SEM.Test Compliance Service Co., Ltd 3/F, Jinbao Commerce Building, Xin'an Fanshen Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by SEM.Test Compliance Service Co., Ltd Peavey Electronics Corporation Model: BTS 5.35 REPORT NO.: STR12108201I PAGE 2 OF 55 FCC PART 15.247 & RSS-210 TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)...............................................................................4 1.2 TEST STANDARDS...................................................................................................................................................5 1.3 TEST METHODOLOGY.............................................................................................................................................5 1.4 TEST FACILITY.......................................................................................................................................................5 1.5 EUT SETUP AND TEST MODE.................................................................................................................................6 2. SUMMARY OF TEST RESULTS ...........................................................................................................................7 3. ANTENNA REQUIREMENT ..................................................................................................................................8 3.1 STANDARD APPLICABLE.........................................................................................................................................8 3.2 EVALUATION INFORMATION..................................................................................................................................8 4. FREQUENCY HOPPING SYSTEM REQUIREMENTS .....................................................................................9 4.1 STANDARD APPLICABLE.........................................................................................................................................9 4.2 EUT PSEUDORANDOM FREQUENCY HOPPING SEQUENCE......................................................................................9 4.3 FREQUENCY HOPPING SYSTEM.............................................................................................................................10 5. QUANTITY OF HOPPING CHANNELS AND CHANNEL SEPARATION ...................................................11 5.1 STANDARD APPLICABLE.......................................................................................................................................11 5.2 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................11 5.3 TEST PROCEDURE.................................................................................................................................................11 5.4 ENVIRONMENTAL CONDITIONS............................................................................................................................11 5.5 SUMMARY OF TEST RESULTS/PLOTS....................................................................................................................12 6. DWELL TIME OF HOPPING CHANNEL ..........................................................................................................18 6.1 STANDARD APPLICABLE.......................................................................................................................................18 6.2 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................18 6.3 TEST PROCEDURE.................................................................................................................................................18 6.4 ENVIRONMENTAL CONDITIONS............................................................................................................................18 6.5 SUMMARY OF TEST RESULTS/PLOTS....................................................................................................................19 7. 20DB BANDWIDTH ...............................................................................................................................................29 7.1 STANDARD APPLICABLE.......................................................................................................................................29 7.2 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................29 7.3 TEST PROCEDURE.................................................................................................................................................29 7.4 ENVIRONMENTAL CONDITIONS............................................................................................................................29 7.5 SUMMARY OF TEST RESULTS/PLOTS...............................…

Text truncated - open the document above for the full version.

Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Conduction Emission Test Setup Radiation Emission Test Setup (Below 1GHz) Peavey Electronics Corp Model: BTS 5.35 REPORT NO.: STR12108201I FCC & IC Radiation Emission Test Setup (30MHz to 1GHz) Radiation Emission Test Setup (Above 1GHz)