IR5RW14Notebook computer

I Mobile Workstation RW14 User’s Guide II Notice The company reserves the right to revise this publication or to change its contents without any notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. Any of the software described in this manual is sold or licensed "as is". Should the programs prove defective following purchase, the buyer (and not the manufacturer, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any software defects. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Copyright© 2019, MilDef Crete Inc. All rights reserved. Trademarks All other brand and product names are trademarks or registered trademarks of their respective companies. III Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF exposure warming This equipment must be installed and operated in accordance with provided instructions and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Regulatory Information/ Disclaimers Installation and use of this workstation must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. IV Federal Communications Commission regulatory compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important: Changes or modifications to this product not authorized by MilDef could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. In order to maintain compliance with FCC regulations, compliant peripheral devices and shielded cables must be used with this equipment. V CE Declaration of Conformity The device is hereby confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2014/30/EC) and Complies with the essential requirements of Article 3 of the R&TTE 2014/53/EC Directive, if used for its intended use and that the following standards have been applied: 1. Health (Article 3.1(a) of the R&TTE Directive) Applied Standard(s): EN 50566 EN 62479:2010 IEC 62209-2:2010 2. Safety (Article 3.1(a) of the R&TTE Directive) Applied Standard(s): EN 60950-1:2006 /A11:2009 /A1:2010 /A12:2011 /A2:2013 3. Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive) Applied Standard(s): EN 301 489-1 V2.1.1/ -17 V3.1.1 4. Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive) Applied Standard(s): EN 300 328 V2.1.1 5. Electromagnetic Compatibility Directive (2004/108/EC) EN 55032: 2012 EN 55022:2010 EN 55024:2010+A1:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 VI Power Conservation This workstation consumes less power compared to conventional consumer workstations. The power consumption may be further reduced by properly configuring the Power Management Setup. It is recommended that the power saving features be enable…

Text truncated - open the document above for the full version.

MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd, Shen Keng District,New Taipei City, Taiwan R.O.C. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2019/11/13 To whom it may concern: We, the undersigned, hereby authorize Worldwide Testing Services (Taiwan) Co., Ltd to act on our behalf in all matters relating to applications for equipment authorization FCC ID: IR5RW14 including the signing of all documents related to these matters. Any and all acts carried out by Worldwide Testing Services (Taiwan) Co., Ltd on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Signature Name: Willie Liang Title: Manager Company: MilDef Crete Inc.

MilDef Crete Inc. 7F, No. 250, Sec.3, Pei Shen Rd., Shen Keng District, New Taipei City, Taiwan Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020-02-03 Request for Long-Term Confidentiality Company name: MilDef Crete Inc. FCC ID: IR5RW14 FCC Part 15 Certification To whom it may concern: In accordance with §§ 0.457(d) and 0.459 of CFR 47, MilDef Crete Inc. hereby requests Long-Term confidentiality of all Block Diagrams, Schematics, Operational Description attachments for the subject application. These documents contain detailed system and equipment description and related information about the product which MilDef Crete Inc. considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, MilDef Crete Inc. considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Signature Name: Willie Liang Title: Manager Company: MilDef Crete Inc.

Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 External Photos Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 2 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 3 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 4 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 5 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 6 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 7 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 8 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 9 of 44

Model No: RW14 INPUT RATING: 12~32V 16.5A MADE IN TAIWAN 030-0 FCC ID: IR5RW14

Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Internal Photos Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 10 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 11 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 12 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 13 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 14 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 15 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 16 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 17 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 18 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 19 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 20 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 21 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 22 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 23 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 24 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 25 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 26 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 27 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 28 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 29 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 30 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 31 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 32 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 33 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 34 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 35 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 36 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 37 of 44

MilDef Crete Inc. 7F, No. 250, Sec.3, Pei Shen Rd., Shen Keng District, New Taipei City, Taiwan Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Applicant’s declaration concerning RF Radiation Exposure We hereby indicate that the product Product description: Notebook computer Model No: RW14 The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The integral antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within the host device. A safety statement concerning minimum separation distances from enclosure of the Product : Notebook computer will be integrated in the user’s manual to provide end-users with transmitter operating conditions for satisfying RF exposure compliance. The appropriate information can be drawn from the test report no: W6M21911-19475-C-1 W6M21911-19475-C-54 and the accompanying calculations. Company: MilDef Crete Inc. Address: 7F, No. 250, Sec.3, Pei Shen Rd., Shen Keng District, New Taipei City, Taiwan Date: 2019/11/13 Signature Registration number: W6M21911-19475-C-1 FCC ID: IR5RW14 3.2 Equivalent Isotropic Radiated Power (EIRP) FCC Rule: 15.247(b)(3) WLAN EIRP = max. conducted output power + antenna gain EIRP = 10.37 dBm + (4.35 dBi [antenna gain claimed by manufacturer] = 14.72 dBm = 29.6483 mW Bluetooth EIRP = max. conducted output power + antenna gain EIRP = 6.08 dBm + (1.78 dBi [antenna gain claimed by manufacturer] = 7.86 dBm = 6.1094 mW BLE EIRP = max. conducted output power + antenna gain EIRP = 2.08 dBm + (1.78 dBi [antenna gain claimed by manufacturer] = 3.86 dBm = 2.4322 mW 3.3 Exemption Limits for Routine Evaluation according to 47 CFR FCC Part 2 Subpart J, section 2.1091 FCC OET Bulletin 65 Edition 97.01 determines the equations for predicting RF fields and applicable limits. The prediction for power density in the far-field but will over-predict power density in the near field, where it could be used for walking a “worst case” or conservative prediction. Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20 cm normally can be maintained between the user and the device. Worldwide Testing Services(Taiwan) Co., Ltd. Page 35 of 107 Registration number: W6M21911-19475-C-1 FCC ID: IR5RW14 MPE Calculation Method E ＝ Electric field (V/m) P ＝ output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to mW/cm 2 . Worldwide Testing Services(Taiwan) Co., Ltd. Page 36 of 107 Registration number: W6M21911-19475-C-1 FCC ID: IR5RW14 WLAN Established separation distance is 20 cm. Operating frequency band: 802.11b, g, n 20MHz: 2412-2462 MHz, 802.11n 40MHz: 2422-2452 MHz, The product meets RF exposure requirement. Because the power density of 0.0059 mW/cm 2 at 2437 MHz is below the power density limit of 1 mW/cm 2 . Bluetooth Established separation distance is 20 cm. Operating frequency band: 2402-2480 MHz, The product meets RF exposure requirement. Because the power density of 0.0012 mW/cm 2 at 2441 MHz is below the power density limit of 1 mW/cm 2 . BLE Established separation distance is 20 cm. Operating frequency band: 2402-2480 MHz The product meets RF exposure requirement. Because the power density of 0.0005 mW/cm 2 at 2440 MHz is below the power density limit of 1 mW/cm 2 . Limits: Limit for General Population / Uncontrolled Exposure Frequency (MHz) Power Density (mW/cm 2 ) 1500 – 100.000 1.0 Worldwide Testing Services(Taiwan) Co., Ltd. Page 37 of 107 Registration number: W6M21911-19475-C-54 FCC ID: IR5RW14 3.6 Automatic Discontinuation of transmission, FCC 15.407 (c) The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. This function will be declared by manufacturer. 3.7 Reserved, FCC 15.407 (d) 3.8 Indoor Operation Restriction, FCC 15.407 (e) Within the 5.15–5.25 GHz band, U- NII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations. This equipment has to be declared by manufacturer of the final product as content of the user manual. 3.9 Equivalent Isotropic Radiated Power (EIRP), FCC 15.407 (f) Band 1 EIRP = max. conducted output power + antenna gain EIRP = 6.34 dBm + (2.07 dBi [antenna gain claimed by manufacturer] = 8.41 dBm = 6.9343 mW Band 4 EIRP = max. conducted output power + antenna gain EIRP = 1.02 dBm + (1.77dBi [antenna gain claimed by manufacturer] = 2.79 dBm = 1.9011 mW Test equipment used: ETSTW-RE 055 Worldwide Testing Services(Taiwan) Co., Ltd. Page 79 of 88 Registration number: W6M21911-19475-C-54 FCC ID: IR5RW14 3.10 Exemption Limits for Routine Evaluation according to 47 CFR FCC Part 2 Subpart J, section 2.1091 FCC OET Bulletin 65 Edition 97.01 determines the equations for predicting RF fields and applicable limits. The prediction for power density in the far-field but will over-predict power density in the near field, where it could be used for walking a “worst case” or conservative prediction. Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20 cm normally can be maintained between the user and the device. E ＝ Electric field (V/m) P ＝ output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance betwe…

Text truncated - open the document above for the full version.

of Applicant: MilDef Crete Inc. Address: 7F, No. 250, Sec.3, Pei Shen Rd., Shen Keng District, New Taipei City, Taiwan R.O.C. Tested and Prepared by Worldwide Testing Services (Taiwan) Co., Ltd. FCC Registration No.: TW1477, TW0020, TW1072 Industry Canada filed test laboratory Reg. No. 20037 A2LA Accredited No.: 2732.01 Report No.: W6M21911-19475-C-1 6F, NO. 58, LANE 188, RUEY-KUANG RD., NEIHU TAIPEI 114, TAIWAN, R.O.C. TEL: 886-2-66068877 FAX: 886-2-66068879 E- mail: [email protected] FCC PART 15 SUBPART C TEST REPORT for Notebook computer Model No.: RW14 FCC ID: IR5RW14 Registration number: W6M21911-19475-C-1 FCC ID: IR5RW14 TABLE OF CONTENTS 1 GENERAL INFORMATION .......................................................................................................... 2 1.1 N OTES .......................................................................................................................................... 2 1.2 TESTING LABORATORY ................................................................................................................ 3 1.2.1 Location .............................................................................................................................. 3 1.2.2 Details of accreditation status ............................................................................................ 3 1.3 DETAILS OF APPROVAL HOLDER ................................................................................................... 3 1.4 APPLICATION DETAILS ................................................................................................................. 4 1.5 G ENERAL INFORMATION OF TEST ITEM ........................................................................................ 4 1.6 T EST STANDARDS ......................................................................................................................... 7 2 TECHNICAL TEST ......................................................................................................................... 8 2.1 S UMMARY OF TEST RESULTS ........................................................................................................ 8 2.2 TEST ENVIRONMENT .................................................................................................................... 8 2.3 T EST EQUIPMENT LIST ................................................................................................................. 9 2.4 GENERAL TEST PROCEDURE ...................................................................................................... 12 3 TEST RESULTS (ENCLOSURE) ................................................................................................ 14 3.1 PEAK OUTPUT POWER (TRANSMITTER) ...................................................................................... 15 3.2 E QUIVALENT ISOTROPIC RADIATED POWER (EIRP) .................................................................. 35 3.3 EXEMPTION LIMITS FOR ROUTINE EVALUATION ACCORDING TO ............................................... 35 47 CFR FCC PART 2 SUBPART J, SECTION 2.1091 ................................................................................. 35 3.3 T RANSMITTER RADIATED EMISSIONS IN RESTRICTED BANDS .................................................... 38 3.4 SPURIOUS EMISSIONS (TX) ......................................................................................................... 39 3.5 CARRIER FREQUENCY SEPARATION ........................................................................................... 41 3.6 N UMBER OF HOPPING FREQUENCIES .......................................................................................... 44 3.6.1 Pseudorandom Frequency Hopping Sequence ................................................................. 46 3.6.2 Coordination of hopping sequences to other transmitters ................................................ 46 3.6.3 System Receiver Hopping Capability ............................................................................... 46 3.7 TIME OF OCCUPANCY (DWELL TIME) ........................................................................................ 47 3.8 20DB BANDWIDTH ..................................................................................................................... 53 3.8.1 System Receiver Input Bandwidth ..................................................................................... 56 3.9 MINIMUM 6 DB BANDWIDTH ..................................................................................................... 57 3.10 RADIATED EMISSION ON THE BAND EDGE .................................................................................. 73 3.11 P EAK POWER SPECTRAL DENSITY ............................................................................................. 88 3.12 RADIATED EMISSION FROM RECEIVER PART ............................................................................ 104 3.13 POWER LINE CONDUCTED EMISSION ....................................................................................... 105 APPENDIX ................................................................................................................................................ 1 Worldwide Testing Services(Taiwan) Co., Ltd. Page 1 of 107 Registration number: W6M21911-19475-C-1 FCC ID: IR5RW14 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test s…

Text truncated - open the document above for the full version.

Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Set Up Photo of Radiated Emission EMI Adaptor Below 1GHz Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 38 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Above 1GHz Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 39 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Battery Below 1GHz Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 40 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Above 1GHz Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 41 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 RF Below 1GHz Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 42 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Above 1GHz Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 43 of 44 Registration number: W6M21911-19475-FCC FCC ID: IR5RW14 Set Up Photo of Conducted Emission Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 44 of 44