IUO9TB097DSSS-AIT Tape Drive Unit

S-AIT Tape Drive Unit S-AIT is an abbreviation of Super Advanced Intelligent Tape Installation Manual LKM-A111-BC / LKM-A121-BC LKM-A111-BD / LKM-A121-BD LMQT00623 Rev. A LKM-A111-BC / LKM-A111-BD IMPORTANT SAFETY NOTICE ................................................................2 WICHTIGE SICHERHEITSHINWEISE – German –.....................................4 Introduction....................................................................................................... 6 About LKM-A111-B Tape Drive..................................................................... 6 Product Features ............................................................................................. 6 System Requirements...................................................................................... 7 Kit Contents ( attached )................................................................................. 7 Precautions ..................................................................................................... 8 Parts and Functions...............................................................................9 Front View ....................................................................................................... 9 Rear View....................................................................................................... 10 Installation........................................................................................................ 11 Option Switches (DIP Switch) ....................................................................... 11 Connecting ...................................................................................................... 11 Table of Contents LKM-A121-BC / LKM-A121-BD IMPORTANT SAFETY NOTICE ...............................................................14 WICHTIGE SICHERHEITSHINWEISE – German –....................................16 Introduction...................................................................................................... 18 About LKM-A121-B Tape Drive.................................................................... 18 Product Features .............................................................................................. 19 System Requirements..................................................................................... 20 Kit Contents ( attached )................................................................................ 20 Precautions ...................................................................................................... 21 Parts and Functions..............................................................................22 Front View ...................................................................................................... 22 Rear View....................................................................................................... 23 Installation........................................................................................................ 24 FC Connection/Setting the LOOP ID ............................................................ 24 Arbitrated Loop Physical Addresses (AL_PA) and Loop IDs ....................... 25 Option Switches (DIP Switch) ....................................................................... 26 Connecting.............................................................................................. 26 Operation ( for Model LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD )..........27 LED Indication for Drive Status .................................................................... 27 Drive Operation .............................................................................................. 28 Interface Implementation ( for Model LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD )..........29 Supported SCSI Messages .............................................................................. 29 Supported SCSI Commands .......................................................................... 29 Maintenance ( for Model LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD )..........30 Filter Exchanging ............................................................................................ 31 Specification ( for Model LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD )..........32 Cartridge Tape Performance ....................................................................... 32 General Performance ....................................................................................... 32 Environmental Conditions............................................................................... 32 Appendix ( for Model LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD )..........33 Mounting the Drive Unit to Rack.................................................................... 33 Anhang – German – ( für den Typ LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD ).......34 Montage........................................................................................................... 34 Installation Manual LKM-A111-BC / LKM-A111-BD 2LKM-A111-BC / LKM-A111-BD IMPORTANT SAFETY NOTICE NOTICE (1) You may not reproduce or transcribe any part of this publication without permission. (2) We reserve the right to revise this document at any time without notice. (3) If you have any questions about this document, contact your sales representative. SAFETY NOTICE (1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. (2) To avoid electric shock, do not attempt to disassemble the cabinet. (3) For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE STATEMENT Class B Computing Device NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pr…

Text truncated - open the document above for the full version.

Matsushita Kotobuki Electronics Industries Ltd. Storage Products Business Unit Address: 2131-1 Minamigata, Kawauchi-cho, Onsen, Ehime 791 – 0395 Japan attn:Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize MET Laboratories, Inc. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Date : Aug 7, 2003 Signature : Printed name : Shinji Yamauchi Company name : Matsushita Kotobuki Electronics Ind.,Ltd. Storage Products Business Unit Legal Affairs Team.

Matsushita Kotobuki Electronics Industries Ltd. Storage Products Business Unit Address: 2131-1 Minamigata, Kawauchi-cho, Onsen, Ehime 791 – 0395 Japan Page 1 of 17 pages TEST REPORT REPORT NUMBER: MKM03F-002 APPLICANT: Matsushita Kotobuki Electronics Industries, Ltd. MODEL NUMBER: LKM-A111-BC FCC ID: IUO9TB097DSS Regulation: FCC Part15B Class B Conducted Emission Test Radiated Emission Test Matsushita Kotobuki Electronics Ind., Ltd. Storage Products Business Unit 2131-1 Minamigata, Kawauchi-cho, Onsen-gun, Ehime-ken, 791-0395 Japan Tel.: +81 89 966 2111 Fax.: +81 89 966 5733 Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 2 of 17 pages TABLE OF CONTENTS Page SECTION 1.TEST CERTIFICATION3 SECTION 2.EQUIPMENT UNDER TEST5 SECTION 3.SUPPORT EQUIPMENT USED6 SECTION 4.CABLE(S) USED 7 SECTION 5.CONSTRUCTION OF EQUIPMENT 8 SECTION 6.OPERATING CONDITIONS9 SECTION 7.TEST PROCEDURE(S) 10 SECTION 8.EVALUATION OF TEST RESULTS11 SECTION 9.PHOTOGRAPHS OF TEST SET-UP 15 SECTION 10. INSTRUMENTS USED FOR TEST16 SECTION 11. PRECISION17 SECTION 12. VALIDITY OF TEST REPORT17 Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 3 of 17 pages SECTION 1. TEST CERTIFICATION APPLICANT INFORMATION Company: Matsushita Kotobuki Electronics Industries, Ltd. Address: 2131-1 Minamigata,Kawauchi-cho,Onsen-gun, Ehime-ken,791-0395 Japan GRANTEE INFORMATION Company: Matsushita Kotobuki Electronics Industries, Ltd. Division / Section : Storage Products Business Unit Legal Affairs Team. Address: 2131-1 Minamigata, Kawauchi-cho, Onsen-gun, Ehime-ken, 791-0395 Japan Telephone number: +81 89 966 2111 Fax number : +81 89 966 5733 Contact person: Shinji Yamauchi DESCRIPTION OF TEST ITEM Kind of equipment: S-AIT Tape Drive Unit Trademark: Matsushita Kotobuki FCC ID : IUO9TB097DSS Model number : LKM-A111-BC Serial number: HA3625X1M00001 Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 4 of 17 pages TEST PERFORMED FCC Registration No.: 90793 Test started : July 2, 2003 Test completed: July 2, 2003 Purpose of test : FCC Docket 87-389 Regulation: FCC Part 15B Class B Unintentional Radiators Test setup: ANSI C63.4 -1992 Report file number: MKM03F-002 Report issue date: July 22, 2003 Test engineer: Shinji Yamauchi Report approved by : Hisayuki Honda [ Manager ] This equipment complies with above standard or regulation under the test condition or test configuration shown on this test report. Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 5 of 17 pages SECTION 2. EQUIPMENT UNDER TEST The equipment under test (EUT) consists of the following equipment. Indication in the following left side column corresponds to section 5. SymbolItemModel No. Serial No. FCC IDManufacturer A) S-AIT Tape LKM-A111-BC HA3625X1M00001 IUO9TB097DSS Matsushita Kotobuki Drive Unit Electronics Ind., Ltd. Power ratings of EUT : AC 100V-240V, 50Hz/60Hz, 0.4A-0.7A 2.1 Port(s) / Connector(s) : SCSI Half pitch Connector (68pin) SCSI Half pitch Connector (68pin) 2.2 Oscillator(s) / Crystal(s) : Oscillator OperatingBoard name Remarks Frequency 20 MHz 20 MHz Main PCB 80 MHz Main PCB 100 MHz Main PCB 120MHz 120 MHz Main PCB High Frequency Module 24 MHz Main PCB 13.56 MHz 13.56 MHz Main PCB 112 MHz 22.4 MHz Main PCB 113 MHz 22.6 MHz Main PCB Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 6 of 17 pages SECTION 3. SUPPORT EQUIPMENT USED The EUT has been supported by the following equipment during these tests. Indication in the following left side column corresponds to section 5. SymbolItemModel No.Serial No.FCC IDManufacturer B) Interface Card ASC-29160 BBOL311OKCY Declaration of Adaptec Conformity C) Host Computer DHM 6NMW81X Declaration ofDELL Conformity D) KeyboardSK-8110 None Declaration ofDELL Conformity E) Color DisplayE151FPb None Declaration of DELL Conformity F) Printer3630A3040A00351BSD8533630AHEWLETT PACKARD G ) Mouse X06-08477 5833432-6 Declaration of DELL Conformity H ) S-AIT Tape LKM-A111-BC None None MatsushitaKotobuki Drive Unit Electronics Ind., Ltd. Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 7 of 17 pages SECTION 4. CABLE(S) USED The following cable(s) was used for testing. Indication number in the following left side column corresponds to section 5. NumberNameLengthShieldFrom To 1)SCSI cable 0.8 mYesInterface Card EUT Metal connector 2) SCSI cable 0.8 m Yes EUT Metal connector S-AIT Tape Drive Unit 3)Keyboard I/F cable2.0 mYesHost Computer Keyboard Metal connector 4)Video Signal1.7 mYesHost Computer Color Display cableMetal connector 5) Mouse cable 1.8m Yes Host Computer Mouse Metal connector 6)Parallel I/F cable1.5 mYesHost Computer Printer Metal connector 7)Power cord for 1.9 mNoneHost Computer Power Source Host Computer 8)Power cord for 1.7 mNoneColor Display Power Source Color Display 9)Power cord for Printer2.0 mNonePrinter AC Adapter 10)Power cord for Printer2.0 mNoneAC Adapter Power Source 11) Power cord for 1.8m None S-AIT Tape Drive Power Source S-AIT Tape Drive Unit Unit 12) Power cord for EUT 1.8m None EUT Power Source None : All cables are not attached ferrite core. Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 8 of 17 pages SECTION 5. CONSTRUCTION OF EQUIPMENT The construction of EUT during testing is as follows. System configuration * : EUT Symbol or numbers assigned to equipment or cables on this diagram are corresponded to the symbols or numbers assigned to equipment or cables on tables in Sections 2 to 4. B) Interface Card C) Host Computer E) Color Display A) S-AIT Tape Drive Unit * F) Printer D) Keyboard G) Mouse 120V AC 60Hz 120V AC 60Hz 120V AC 60Hz 120V AC 60Hz 20V AC60Hz AC Adapter 1 2 3 4 56 7 8 9 10 H) S-AIT Tape Drive Unit 120V AC 60Hz 1112 Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 9 of 17 pages SECTION 6. OPERATING CONDITIONS The EUT has been operated under the following conditions during the tests. 6.1 Operating condition The tests have been carried out under Write mode. 6.2 Operation flow Performed following operations continuously. EUT writes the ”H”characters’data to Tape Cartridge. LCD Display displays the data. C…

Text truncated - open the document above for the full version.

Report No. MKM03F-002 FCC ID : IUO9TB097DSS Page 15 of 17 pages SECTION 9. PHOTOGRAPHS OF TEST SET-UP Test setup in accordance with ANSI C63.4-1992 9.1 Conducted Emission Test Front View Rear view 9.2 Radiated Emission Test Front View Rear view Note : Maintaining 10cm spacing between all the equipment cabinets.