JNF-BTS-DBWWearable Scanner

Cover 1 Model: DBW1C Di Bar Watch i USER’S MANUAL Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 September 1, 2014Preliminary release Di Bar Watch ii USER’S MANUAL Important Notice No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable for any errors contained herein nor for incidental or consequential damages in connection with furnishing, performance or use of this material. We shall be under no liability in respect of any defect arising from fair wear and tear, willful damage, negligence, abnormal working conditions, failure to follow the instructions and warnings, or misuse or alteration or repair of the products without written approval. No part of this document may be reproduced, transmitted, stored in a retrieval system, transcribed, or translated into any human or computer or other language in any form or by any means electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise, except for brief passages which may be quoted for purposes of scholastic or literary review, without express written consent and authorization. We reserve the right to make changes in product design without reservation and without notification. The material in this guide is for information only and is subject to change without notice. All trademarks mentioned herein, registered or otherwise, are the properties of their various, ill, assorted owners. General Handling Precautions Do not dispose the scanner in fire. Do not put the scanner directly in the sun or by any heat source. Do not use or store the scanner in a very humid place. Do not drop the scanner or allow it to collide violently with other objects. Do not take the scanner apart without authorization Guidance for Printing This manual is in A5 size. Please double check your printer setting before printing it out. When the barcodes are to be printed out for programming, the use of a high-resolution laser printer is strongly suggested for the best scan result. Copyright © 2014. All rights reserved. USER’S MANUAL Radio Notice This equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions in this manual, it may cause interference to radio communications. Radio and Television Interference Operation of this equipment in a residential area can cause interference to radio or television reception. This can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures: - Reorient the receiving antenna. - Relocate the device with respect to the receiver. - Move the device away from the receiver. - Plug the device into a different outlet so that the device and the receiver are on different branch circuits. If necessary the user may consult the manufacturer, and authorized dealer, or experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, DC 20402 U.S.A., Stock No. 004000003454. Laser Safety This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions in this manual, it may cause interference to radio communications. Di Bar Watch iii Di Bar Watch iv USER’S MANUAL Laser Light Viewing: The scan window is the only aperture through which laser light may be observed from this product. A failure of the scanner engine, while the laser diode continues to emit a laser beam, may cause emission levels to exceed those for safe operation. The scanner has safeguards to prevent this occurrence. If, however, a stationary laser beam is emitted, the failing scanner should be disconnected from its power source immediately. Adjustments: Do not attempt any adjustments or alteration of this product. Do not remove the protective housing of the scanner. There are no user-serviceable parts inside. Optical: The use of optical instruments with this product will increase the eye hazard. Optical instruments include binoculars, magnifying glasses, and microscopes but do not include normal eye glasses worn by the user. CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Power Supply  Use only the type of battery and the charging equipments that came with your scanner.  Using any other type of battery and charging equipment may damage the scanner and invalidate the warranty.  Do not short the battery terminals. The battery could overheat.  Do not attempt to split or peel the outer casing.  Remove the battery if the scanner is not going to be used for a long time. If the battery is left unused for more than 3 months, you need to charge the battery before use. Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Di Bar Watch v USER’S MANUAL Tips to help improve your wireless network 1. Position the access point (host/dongle) in a relatively empty space at central location. When possible, place the access point in a central location on the high ground (1m or above). If your access point is against an outside wall, the signal will be weak on the other side of the room. 2. Move the access point (host/dongle) off the floor and away from walls and metal objects (such as metal file cabinets). Metal objects, walls, and floors will interfere with your wireless signals. The closer your access point is to these obstructions, the more severe the interference, and the weaker your connection will be. USER’S MANUAL Di Bar Watch vi 3. Reduce wireless inter…

Text truncated - open the document above for the full version.

Report No.T140825D01 Page 1 of 5 External Photo(Model: DBW1C) Report No.T140825D01 Page 2 of 5 External Photo(Model: DBW-BW) Report No.T140825D01 Page 3 of 5 External Photo(Model: DBW-BB) Report No.T140825D01 Page 4 of 5 External Photo(Model: DBW-BR) Report No.T140825D01 Page 5 of 5 Micro USB Cable

22,5 18,5 比例 1:1 21.5 x 17.5 (mm) 流水號 序號從開始，以此類推 機種型號代碼 DBW1C00001 Top Bottom Watch Device Label 511-xxxxxx-xxx 51-xxxxxx-xxx1 2014 Patty Wu 2014/09/09 0909 0.1 / DBW1C 比例 2:1 材質 : 50 番反銀龍 尺寸 : 21.5 x 17.5 (mm) 文字 : 黑色印刷 背膠 : 壓克力雙面膠 Designed by WELCOM in Japan Assembled in Taiwan Model No : DBW1C INPUT : 5V 0.5A S/N : DBW1C00001 Wearable Scanner FCC ID : JNF-BTS-DBW R 201- jjxxxx 0560 Designed by WELCOM in Japan Assembled in Taiwan Model No : DBW1C INPUT : 5V 0.5A S/N : DBW1C00001 Wearable Scanner FCC ID : JNF-BTS-DBW R 201- jjxxxx 0560 Designed by WELCOM in Japan Assembled in Taiwan Model No : DBW1C INPUT : 5V 0.5A S/N : DBW1C00001 Wearable Scanner FCC ID : JNF-BTS-DBW R 201- jjxxxx 0560

Report No.T140825D01 Page 1 of 8 Internal Photo Report No.T140825D01 Page 2 of 8 Report No.T140825D01 Page 3 of 8 Report No.T140825D01 Page 4 of 8 Report No.T140825D01 Page 5 of 8 Report No.T140825D01 Page 6 of 8 Report No.T140825D01 Page 7 of 8 Battery Report No.T140825D01 Page 8 of 8 Antenna

Compliance Certification Services Inc. Report No.: T140825D01-RP1-1 Date of Issue: October 21, 2014 Page 1 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. According to KDB 447498 section 4.3.1, the 1-g SAR test exclusion thresholds at test separation distance ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] *·[f(GHz)] ≤ 3.0 The tune-up power is 6 dBm +/- 2dB, therefore the highest tune-up power is 2.17 dBm(1.65 mW)@ 2441 MHz When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. So, (1.65mW / 5mm)* (2.441GHz ^0.5 )= 0.5 [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] * [f(GHz)] = 0.5 < 3.0 Therefore, standalone SAR measurements are not required for both head and body.

FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 1 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. FCC 47 CFR PART 15 SUBPART C AND ANSI C63.10:2009 TEST REPORT For Wearable Scanner Model : DBW1C Data Applies To : DBW-BW ; DBW-BB; DBW-BR Trade Name : ZEBEX Issued for ZEBEX INDUSTRIES INC. B1F.-1, No. 207, Sec. 3, Beixin Rd, Xindian Dist, New Taipei City 23143, Taiwan Issued by Compliance Certification Services Inc. Hsinchu Lab. NO. 989-1 Wen Shan Rd., Shang Shan Village, Qionglin Shiang Hsinchu County 30741, Taiwan, R.O.C TEL: +886-3-5921698 FAX: +886-3-5921108 http://www.ccsrf.com E-Mail : [email protected] Issued Date: October 21, 2014 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF or any government agencies. The test results of this report relate only to the tested sample identified in this report. FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 2 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 10/21/2014 Initial Issue All Page 81 Dola Hsieh FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 3 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. TABLE OF CONTENTS TITLE PAGE NO. 1. TEST REPORT CERTIFICATION ................................................................................ 4 2. EUT DESCRIPTION ..................................................................................................... 5 3. DESCRIPTION OF TEST MODES ............................................................................... 6 4. TEST METHODOLOGY ............................................................................................... 7 5. FACILITIES AND ACCREDITATION ........................................................................... 8 5.1 FACILITIES ............................................................................................................ 8 5.2 ACCREDITATIONS................................................................................................ 8 5.3 MEASUREMENT UNCERTAINTY ......................................................................... 9 6. SETUP OF EQUIPMENT UNDER TEST...................................................................... 10 7. FCC PART 15.247 REQUIREMENTS.......................................................................... 12 7.1 20dB BANDWIDTH FOR HOPPING...................................................................... 12 7.2 MAXIMUM PEAK OUTPUT POWER ..................................................................... 18 7.3 AVERAGE POWER ............................................................................................... 20 7.4 HOPPING CHANNEL SEPARATION..................................................................... 22 7.5 NUMBER OF HOPPING FREQUENCY USED...................................................... 28 7.6 DWELL TIME ON EACH CHANNEL ...................................................................... 31 7.7 CONDUCTED SPURIOUS EMISSION .................................................................. 46 7.8 RADIATED EMISSION........................................................................................... 54 7.9 CONDUCTED EMISSION ...................................................................................... 73 APPENDIX II SETUP PHOTOS ....................................................................................... 78 FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 4 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. 1. TEST REPORT CERTIFICATION Applicant ZEBEX INDUSTRIES INC. Address B1F.-1, No. 207, Sec. 3, Beixin Rd, Xindian Dist, New Taipei City 23143, Taiwan Equipment Under Test Wearable Scanner Model DBW1C Data Applies To DBW-BW ; DBW-BB ; DBW-BR Trade Name ZEBEX Tested Date August 25 ~ October 16, 2014 APPLICABLE STANDARD Standard Test Result FCC Part 15 Subpart C AND ANSI C63.10:2009 PASS WE HEREBY CERTIFY THAT: The above equipment has been tested by Compliance Certification Services Inc., and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Approved by: Reviewed by: Sb. Lu Gundam Lin Sr. Engineer Sr. Engineer FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 5 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. 2. EUT DESCRIPTION Product Name Wearable Scanner Model Number DBW1C Data Applies To DBW-BW ; DBW-BB ; DBW-BR Identify Number T140825D01 Received Date August 25, 2014 Frequency Range 2402MHz to 2480MHz f = 2402 + nMHz, n = 0, .....78 Transmit Power 2.17 dBm (0.0016W) Channel Spacing 1MHz Channel Number 79 Channels Transmit Data Rate GFSK (1Mbps), π/4-DQPSK (2Mbps), 8-DPSK (3Mbps) Type of Modulation Frequency Hopping Spread Spectrum Frequency Selection by software / firmware Antenna Type Chip Antenna, Antenna Gain : 2.13 dBi Power Rating 3.7Vdc, 1.04Wh (For Battery) 5Vdc (For Charging) Test Voltage 120Vac, 60Hz I/O Port Micro USB Port × 1 Signal Cable Shielded Micro USB cable 1.5 m × 1 (Detachable) The difference of the series model : Model Number Difference DBW1C EUT (watch) DBW-BW EUT (watch) with white belt DBW-BB EUT (watch) wi…

Text truncated - open the document above for the full version.

FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 78 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. APPENDIX II SETUP PHOTOS RADIATED EMISSION SETUP Below 1GHz FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 79 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Above 1GHz FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 80 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP FCC ID :JNF-BTS-DBW Report No.T140825D01-RP1 Page 81 / 81 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. CONDUCTED EMISSION SETUP