JZ2X001800Ribbon RFID Encoder

15370 Barranca Parkway Irvine, CA 92618-2215 USA DTC1000_DTC4000 User Guide © 2009 HID Global Corporation. All rights reserved. DTC1000_DTC4000 Card Printer/Encoder User Guide (Rev 1.1), © 2009 property of HID Global Corporation. All rights reserved. Exclusive permission is granted to authorized resellers of HID Global products to reproduce and distribute this copyrighted document to authorized HID Global customers, who have signed a no disclosure agreement regarding the restricted, proprietary use of said document. The revision number for this document will be updated to reflect changes, corrections, updates and enhancements to this document. Revision Control Number Date Document Title Revision 1.1 December 2009 DTC1000_DTC4000 Card Printer/Encoder User Guide Trademarks and Disclaimers HID, HID Global, and Fargo are the trademarks or registered trademarks of HID Global Corporation in the U.S. and other countries. The information contained in this document is provided AS IS without any warranty. HID Global hereby disclaims all warranties and conditions with regard to the information contained herein, including all implied warranties of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall HID Global be liable, whether in contract, tort or otherwise for any indirect, special or consequential damages arising from the use of the information contained in this document. Any questions regarding changes, corrections, updates or enhancements to this document should be forwarded to: Hid Global Support Services 6533 Flying Cloud Drive Eden Prairie, MN 55344 (USA) (866)607-7339 Ext #6 FAX: (952) 946-8492 www.hidglobal.com DTC1000_DTC4000 User Guide____________________________________________________________ 1 Section 1: Specifications__________________________________________________________________ 5 Regulatory Compliances___________________________________________________________________________ 5 Agency Listings__________________________________________________________________________________ 5 FCC Rules_____________________________________________________________Error! Bookmark not defined. Safety Messages (review carefully)___________________________________________________________________ 7 Environmental Protection (China-RoHS)______________________________________________________________ 7 Traditional Chinese RF Emissions and Safety Statements_______________________________________________ 9 Technical Specifications___________________________________________________________________________ 9 Functional Specifications__________________________________________________________________________ 12 Printer Components: Print Ribbons_______________________________________________________________ 12 Ribbon Types/Count Table________________________________________________________________________ 13 Printer Components: Blank Cards________________________________________________________________ 14 Section 2: Setup and Installation Procedures____________________________Error! Bookmark not defined. Choosing a Good Location________________________________________________Error! Bookmark not defined. About Moisture Condensation___________________________________________Error! Bookmark not defined. Unpacking and Inspection_______________________________________________Error! Bookmark not defined. Installing the Print Ribbon Cartridge (DTC1000 and DTC4000)___________________Error! Bookmark not defined. Installing the Ribbon___________________________________________________Error! Bookmark not defined. Installing Blank Cards into the Card Hopper (DTC1000 and DTC4000)_____________Error! Bookmark not defined. Connecting the Printer power____________________________________________Error! Bookmark not defined. |contextid=10Section 3: Print Driver Installation________________________Error! Bookmark not defined. Driver Installation Instructions_____________________________________________Error! Bookmark not defined. Section 4: Printer Preferences Tab Functions___________________________Error! Bookmark not defined. |contextid=30Using the Card tab____________________________________________Error! Bookmark not defined. Using the Toolbox Options________________________________________________Error! Bookmark not defined. |contextid=150Using the Configuration Tab___________________________________Error! Bookmark not defined. Using the Event Monitoring Group Box______________________________________Error! Bookmark not defined. Reviewing the Ribbon Low message______________________________________Error! Bookmark not defined. |contextid=155Selecting the Advanced Settings tab_____________________________Error! Bookmark not defined. |contextid=40Using the Device Options tab____________________________________Error! Bookmark not defined. |contextid=50Using the Image Color tab______________________________________Error! Bookmark not defined. |contextid=51Using the Image Calibrate tab___________________________________Error! Bookmark not defined. |contextid=70Using the Magnetic Encoding Tab________________________________Error! Bookmark not defined. Using the Magnetic Encoding Tab – ISO Standards___________________________Error! Bookmark not defined. Using the Magnetic Encoding Tab – Custom Encoding or Raw Binary Encoding ModeError! Bookmark not defined. Reviewing the ISO Track Locations_______________________________________Error! Bookmark not defined. Reviewing the Sample String____________________________________________Error! Bookmark not defined. Sending the Track Information___________________________________________Error! Bookmark not defined. Reviewing the ASCII Code and Character Table_____________________________Error! Bookmark not defined. |contextid=110Using the Overlay / Print Area tab_______________________________Error! Bookmark not defined. |contextid=100Using the K Panel Resin tab____________________________________Error! Bookmark not defined. |contextid=120Using the Prin…

Text truncated - open the document above for the full version.

15370 Barranca Parkway Irvine, CA 92618-2215 USA DTC1000_DTC4000 User Guide © 2009 HID Global Corporation. All rights reserved. DTC1000_DTC4000 Card Printer/Encoder User Guide (Rev 1.1), © 2009 property of HID Global Corporation. All rights reserved. Exclusive permission is granted to authorized resellers of HID Global products to reproduce and distribute this copyrighted document to authorized HID Global customers, who have signed a no disclosure agreement regarding the restricted, proprietary use of said document. The revision number for this document will be updated to reflect changes, corrections, updates and enhancements to this document. Revision Control Number Date Document Title Revision 1.1 December 2009 DTC1000_DTC4000 Card Printer/Encoder User Guide Trademarks and Disclaimers HID, HID Global, and Fargo are the trademarks or registered trademarks of HID Global Corporation in the U.S. and other countries. The information contained in this document is provided AS IS without any warranty. HID Global hereby disclaims all warranties and conditions with regard to the information contained herein, including all implied warranties of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall HID Global be liable, whether in contract, tort or otherwise for any indirect, special or consequential damages arising from the use of the information contained in this document. Any questions regarding changes, corrections, updates or enhancements to this document should be forwarded to: Hid Global Support Services 6533 Flying Cloud Drive Eden Prairie, MN 55344 (USA) (866)607-7339 Ext #6 FAX: (952) 946-8492 www.hidglobal.com DTC1000_DTC4000 User Guide____________________________________________________________ 1 Section 1: Specifications__________________________________________________________________ 5 Regulatory Compliances___________________________________________________________________________ 5 Agency Listings__________________________________________________________________________________ 5 FCC Rules_____________________________________________________________Error! Bookmark not defined. Safety Messages (review carefully)___________________________________________________________________ 7 Environmental Protection (China-RoHS)______________________________________________________________ 7 Traditional Chinese RF Emissions and Safety Statements_______________________________________________ 9 Technical Specifications___________________________________________________________________________ 9 Functional Specifications__________________________________________________________________________ 12 Printer Components: Print Ribbons_______________________________________________________________ 12 Ribbon Types/Count Table________________________________________________________________________ 13 Printer Components: Blank Cards________________________________________________________________ 14 Section 2: Setup and Installation Procedures____________________________Error! Bookmark not defined. Choosing a Good Location________________________________________________Error! Bookmark not defined. About Moisture Condensation___________________________________________Error! Bookmark not defined. Unpacking and Inspection_______________________________________________Error! Bookmark not defined. Installing the Print Ribbon Cartridge (DTC1000 and DTC4000)___________________Error! Bookmark not defined. Installing the Ribbon___________________________________________________Error! Bookmark not defined. Installing Blank Cards into the Card Hopper (DTC1000 and DTC4000)_____________Error! Bookmark not defined. Connecting the Printer power____________________________________________Error! Bookmark not defined. |contextid=10Section 3: Print Driver Installation________________________Error! Bookmark not defined. Driver Installation Instructions_____________________________________________Error! Bookmark not defined. Section 4: Printer Preferences Tab Functions___________________________Error! Bookmark not defined. |contextid=30Using the Card tab____________________________________________Error! Bookmark not defined. Using the Toolbox Options________________________________________________Error! Bookmark not defined. |contextid=150Using the Configuration Tab___________________________________Error! Bookmark not defined. Using the Event Monitoring Group Box______________________________________Error! Bookmark not defined. Reviewing the Ribbon Low message______________________________________Error! Bookmark not defined. |contextid=155Selecting the Advanced Settings tab_____________________________Error! Bookmark not defined. |contextid=40Using the Device Options tab____________________________________Error! Bookmark not defined. |contextid=50Using the Image Color tab______________________________________Error! Bookmark not defined. |contextid=51Using the Image Calibrate tab___________________________________Error! Bookmark not defined. |contextid=70Using the Magnetic Encoding Tab________________________________Error! Bookmark not defined. Using the Magnetic Encoding Tab – ISO Standards___________________________Error! Bookmark not defined. Using the Magnetic Encoding Tab – Custom Encoding or Raw Binary Encoding ModeError! Bookmark not defined. Reviewing the ISO Track Locations_______________________________________Error! Bookmark not defined. Reviewing the Sample String____________________________________________Error! Bookmark not defined. Sending the Track Information___________________________________________Error! Bookmark not defined. Reviewing the ASCII Code and Character Table_____________________________Error! Bookmark not defined. |contextid=110Using the Overlay / Print Area tab_______________________________Error! Bookmark not defined. |contextid=100Using the K Panel Resin tab____________________________________Error! Bookmark not defined. |contextid=120Using the Prin…

Text truncated - open the document above for the full version.

TEST REPORT Report Number: 3187290MIN-002 Project Number: 3181459 Testing performed on the Ribbon RFID FCC ID: JZ2X001800 Industry Canada ID: 6019A-X001800 to 47 CFR Part 15. 225:2008 RSS- 210, Issue 7, 2007 For Fargo Electronics Inc. Test Performed by: Test Authorized by: Intertek Testing Services NA, Inc. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 Fargo Electronics, Inc. 6533 Flying Cloud Drive, Suite 100 Eden Prairie, MN 55344 Prepared by: Date: August 21, 2009 Uri Spector Reviewed by: Date: August 21, 2009 Simon Khazon This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. This report must not be used to claim product endorsement by A2LA, NIST nor any other agency of the U.S. Government. EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 TABLE OF CONTENTS 1.0 GENERAL DESCRIPTION.......................................................................................................... 3 1.1 Product Description; Test Facility ....................................................................................... 4 1.3 Environmental conditions.................................................................................................... 5 1.4 Measurement uncertainty ................................................................................................... 6 1.5 Field Strength Calculation................................................................................................... 6 2.0 TEST SUMMARY.......................................................................................................................... 7 3.0 TEST CONDITIONS AND RESULTS........................................................................................ 8 3.1 Field strength within the band of operation......................................................................... 8 3.2 Field strength outside of the band of operation ................................................................ 11 3.3 Frequency Tolerance ........................................................................................................ 15 3.4 Bandwidth of Emissions.................................................................................................... 16 3.5 Transmitter power line conducted emissions ................................................................... 19 4.0 TEST EQUIPMENT..................................................................................................................... 22 EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.0 GENERAL DESCRIPTION Model: Ribbon RFID Type of EUT: Printer with RFID Serial Number: N/A FCC ID: JZ2X001800 Industry Canada ID: 6019A-X001800 Related Submittal(s) Grants: None Company: Fargo Electronics Inc. Customer: Mr. Leon Gershenovich Address: 6533 Flying Cloud Drive, Suite 100 Eden Prairie, MN 55344 Phone: (952) 918-8622 Fax: (952) 826-7949 Test Standards: 47 CFR, Part 15:2008, §15.225 RSS–210, Issue 7, 2007 RSS-Gen, Issue 2, 2007 47 CFR, Part 15:2008, §15.107 and §15.109, Class Other Type of radio: Stand -alone Module Hybrid Date Sample Submitted: August 18, 2009 Test Work Started: August 18, 2009 Test Work Completed: August 21, 2009 Test Sample Conditions: Damaged Poor (Usable) Good EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.1 Product Description; Test Facility Product Description: RFID Transmitter Operating Frequency 13.56MHz Modulation: ASK Emission Designator: 10K0A1D Antenna(s) Info: PCB Antenna with 4 wires Antenna Installation: User Professional Factory Transmitter Power Configuration: Internal battery External power source 100-240VAC 230VAC 400VAC VDC Other: Amp. 50-60Hz Special Test Arrangement: The transmitter was tested as a part of the printer/host unit as a worst case, Conducted Emissions testing was performed at the printer AC port. Fargo Electronics HostControl Lite Test software was used to run transmitter continuously. Test Facility Accreditation: A2LA (Certificate No. 1427.01) Test Methodology: Measurements performed according to the procedures in ANSI C63.4- 2003 EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.2 EUT Configuration The equipment under test was operated during the measurement under the following conditions: - Standby - Continuous - Test program (customer specific) - Operating modes of the EUT: No. Description 1 The EUT was operated using Fargo Electronics HostControl Lite Test software 2 Cables: No. Type Length Designation Note 1 USB cable 1’ USB connection to the Remote PC 2 Support equipment/Services: No. Item Description 1 Laptop PC model Dell Latitude D610 Remote PC 2 1.3 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 15-35°C Humidity: 30-60% Atmospheric pressure: 86-106kPa Extreme Temperature: -20 to +50°C Primary Supply Voltage: + 15% EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.4 Measurement uncertainty The expanded uncertainty (k = 2) for radiated emissions from 30 to 1000 MHz has been determined to be: ±4 dB at 10m and ±5.4 dB at 3m The expanded uncertainty (k = …

Text truncated - open the document above for the full version.

TEST REPORT Report Number: 3187290MIN-002 Project Number: 3181459 Testing performed on the Ribbon RFID FCC ID: JZ2X001800 Industry Canada ID: 6019A-X001800 to 47 CFR Part 15. 225:2008 RSS- 210, Issue 7, 2007 For Fargo Electronics Inc. Test Performed by: Test Authorized by: Intertek Testing Services NA, Inc. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 Fargo Electronics, Inc. 6533 Flying Cloud Drive, Suite 100 Eden Prairie, MN 55344 Prepared by: Date: August 21, 2009 Uri Spector Reviewed by: Date: August 21, 2009 Simon Khazon This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. This report must not be used to claim product endorsement by A2LA, NIST nor any other agency of the U.S. Government. EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 TABLE OF CONTENTS 1.0 GENERAL DESCRIPTION.......................................................................................................... 3 1.1 Product Description; Test Facility ....................................................................................... 4 1.3 Environmental conditions.................................................................................................... 5 1.4 Measurement uncertainty ................................................................................................... 6 1.5 Field Strength Calculation................................................................................................... 6 2.0 TEST SUMMARY.......................................................................................................................... 7 3.0 TEST CONDITIONS AND RESULTS........................................................................................ 8 3.1 Field strength within the band of operation......................................................................... 8 3.2 Field strength outside of the band of operation ................................................................ 11 3.3 Frequency Tolerance ........................................................................................................ 15 3.4 Bandwidth of Emissions.................................................................................................... 16 3.5 Transmitter power line conducted emissions ................................................................... 19 4.0 TEST EQUIPMENT..................................................................................................................... 22 EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.0 GENERAL DESCRIPTION Model: Ribbon RFID Type of EUT: Printer with RFID Serial Number: N/A FCC ID: JZ2X001800 Industry Canada ID: 6019A-X001800 Related Submittal(s) Grants: None Company: Fargo Electronics Inc. Customer: Mr. Leon Gershenovich Address: 6533 Flying Cloud Drive, Suite 100 Eden Prairie, MN 55344 Phone: (952) 918-8622 Fax: (952) 826-7949 Test Standards: 47 CFR, Part 15:2008, §15.225 RSS–210, Issue 7, 2007 RSS-Gen, Issue 2, 2007 47 CFR, Part 15:2008, §15.107 and §15.109, Class Other Type of radio: Stand -alone Module Hybrid Date Sample Submitted: August 18, 2009 Test Work Started: August 18, 2009 Test Work Completed: August 21, 2009 Test Sample Conditions: Damaged Poor (Usable) Good EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.1 Product Description; Test Facility Product Description: RFID Transmitter Operating Frequency 13.56MHz Modulation: ASK Emission Designator: 10K0A1D Antenna(s) Info: PCB Antenna with 4 wires Antenna Installation: User Professional Factory Transmitter Power Configuration: Internal battery External power source 100-240VAC 230VAC 400VAC VDC Other: Amp. 50-60Hz Special Test Arrangement: The transmitter was tested as a part of the printer/host unit as a worst case, Conducted Emissions testing was performed at the printer AC port. Fargo Electronics HostControl Lite Test software was used to run transmitter continuously. Test Facility Accreditation: A2LA (Certificate No. 1427.01) Test Methodology: Measurements performed according to the procedures in ANSI C63.4- 2003 EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.2 EUT Configuration The equipment under test was operated during the measurement under the following conditions: - Standby - Continuous - Test program (customer specific) - Operating modes of the EUT: No. Description 1 The EUT was operated using Fargo Electronics HostControl Lite Test software 2 Cables: No. Type Length Designation Note 1 USB cable 1’ USB connection to the Remote PC 2 Support equipment/Services: No. Item Description 1 Laptop PC model Dell Latitude D610 Remote PC 2 1.3 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 15-35°C Humidity: 30-60% Atmospheric pressure: 86-106kPa Extreme Temperature: -20 to +50°C Primary Supply Voltage: + 15% EMC Report No: 3187290MIN-002 FCC ID: JZ2X001800 IC ID: 6019A-X001800 1.4 Measurement uncertainty The expanded uncertainty (k = 2) for radiated emissions from 30 to 1000 MHz has been determined to be: ±4 dB at 10m and ±5.4 dB at 3m The expanded uncertainty (k = …

Text truncated - open the document above for the full version.