K6M-BTR1ADVBTR1 Advanced

PAIRING 4 UNITS IN CONFERENCE Status: Settings Note: the Conference mode allows the simultaneous communication amongst units. All units must be paired in a “chain” configuration: the Down button of the first unit must be paired to the Up button of the second unit and so on. For a detailed description of the function go to paragraph “Conference” of the complete user manual or watch the video tutorial MIDLAND INTERCOM PAIRING Status: Settings 3”3” Press for 3 secondsPress for 3 seconds FlashesFlashes Confirm (1 sec.)Confirm (1 sec.) Pairing successful ON/OFF DESCRIPTION OF BUTTONS Vol + Vol - Led Led Control Button Up Button Down Button SWITCH ON 3” Press for 3 seconds Beep Flashes SWITCH OFF 3” Press together for 3 sec. Flashes Notification jingle DESCRIPTION OF BUTTONS Main pairing: Phone, TFT, GPS (Mono/Stereo) Secondary pairing with: GPS, 2nd phone (Mono) Pairing with: Midland Intercom Other brand intercom Pairing with: Midland Intercom PAIRINGS ACCESS SETTINGS Status: device off 7” Press for 7 seconds Beep Flashes Static PHONE, GPS, TFT PAIRING Status: Settings 3” Press for 3 seconds Beep Flashes Select BTR1 Advanced on phone, GPS or TFT Beep Confirm (1 sec.) POCKET GUIDE Note: to pair a 2nd device in mono audio, repeat this procedure using Vol -. Note: to pair another Midland intercom, follow the same procedure using the Up/Down buttons. OTHER BRAND INTERCOM PAIRING (UNIVERSAL INTERCOM) Status: Settings 7” 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 Press for 7 seconds Follow procedure to pair with a phone Flashes fast (press and hold) Flashes slowly (Release) RESET BLUETOOTH PAIRINGS Status: Settings 3” Press together, 3 seconds Beep Confirm (1 sec.) Static EXIT SETTINGS MODE CANCEL PAIRING Status: Settings x2 Press 2 times Flashing changes ATTENTION: To carry out any pairings you need to access Settings. If the Control button is pressed for fewer than 7 seconds, the device will switch itself on instead of accessing Settings. If this occurs, repeat the process. Go to our website midlandeurope.com, download the complete manual and the BT Updater software. Customize your intercom and discover all the functions with the BTPRO SetApp. Download it here: HIGH DEFINITION SOUND BY Frequency (GHz)Max power (mW) 2.402 - 2.480100 Pairing with: Midland intercom (Vox, music sharing) 3” 3” 3” BTR1 ADVANCED Bike to Bike Conference Communication CONFERENCE CONFERENCE ENGLISH 1 Produced or imported by: Midland Europe srl Via R. Sevardi 7 - 42124 Reggio Emilia - Italy. OPERATING MODES A. Intercom Mode: to communicate with another device. B. Phone Mode: for phone calls or for managing music. C. FM Radio Mode: to listen to radio, search and store stations. Note: Phone mode and Intercom mode are enabled only when your intercom is paired to other devices. CHOOSE OPERATING MODE Status: device on 3” INTERCOM MODE PHONE MODEFM RADIO MODE Press for 3 seconds to change mode or press and hold to scroll quickly Operating mode status Note: By pressing simultaneously Vol + and Vol -, BTR1 Advanced communicates the selected operating mode. INTERCOM MODE FUNCTION DESCRIPTION Rider 2 (Passenger) Rider 1 Rider 3 TO OPEN/CLOSE INTERCOM MANUALLY Status: Intercom mode x1 Press 1 time Beep Flashes TO OPEN/CLOSE INTERCOM BY VOICE Status: in all modes Say “Hi” Voice announcement Flashes Silent for 40 sec. the intercom deactivates Beep VOX ACTIVATION/DEACTIVATION Status: in all modes 7” Press for 7 seconds Voice announcement TO OPEN/CLOSE UNIVERSAL INTERCOM Status: Intercom mode 3” Press for 3 seconds to activate or deactivate the Universal Intercom Beep Flashes Note: Voice activation is only possible when the intercom device is paired with the Control button. Note: to activate/deactivate the audio from a different brand device, use the voice call command (for some models it is necessary to send the voice call twice) MAKING A CALL Status: Phone mode x1 Press 1 time Voice Assistant Response (Google assistant, Siri) Give instructions Call PHONE MODE FUNCTION DESCRIPTION Play/Pause (Phone on Vol+) • Call • Answer • End • Reject • Next song Seek previous station Previous memory radio station ANSWERING/ENDING A CALL - REJECTING A CALL Status: All modes x1 Press 1 time to answer/end a call 3” Press for 3 sec. to reject a call Note: If you have a phone paired with the Vol - button, use the Down button. RADIO MODE FUNCTION DESCRIPTION MUSIC Status: Phone mode Select Music app x1 Press 1 time Play/Pause x1 Press 1 time Next track x1 Press 1 time Previous track 3” Press for 3 sec. Start/stop sharing music with passenger (paired with Control button) FM Radio On/Off Seek next station Next memory radio station (Phone on Vol-) • Call • Answer • End • Reject • Previous track FM RADIO Status: Radio mode x1 Press 1 time ON/OFF x1 Press 1 time Next station 3” Press for 3 seconds Next preset x1 Press 1 time Previous station 3” Press for 3 seconds Previous preset SHORTCUT: In Intercom/FM radio modes pressing Control 2 times activates/deactivates the music. SHORTCUT: In Phone mode by pressing the UP/DOWN buttons twice, turns the Intercom on/off (Rider 1, 3). Note: If you have a phone paired with the Vol - button, use the Down button. Nota: to communicate with Rider 1/3 repeat the process pressing the Up/ (Rider 1)/Down (Rider 3) buttons. Rider 4 (Universal Intercom) TO OPEN/CLOSE CONFERENCE Status: Conference mode x1 Press once opens/closes Conference to the unit paired to button Up. x1 Press once opens Conference to all units paired. x1 Press once opens/closes Conference to unit paired to button Down. TO ENABLE/DISABLE THE CONFERENCE MODE Status: in all modes 3” Keep pressed together for 3 seconds; the Conferen- ce mode will be enabled/ disabled. Voice announcement Connection status Note: in Conference mode, the devices paired to Vol+/Vol- are temporarily disconnected. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer…

Text truncated - open the document above for the full version.

Midland Europe srl Via Roberto Sevardi, 7 Mancasale, Reggio Emilia 42100, Italy Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-05-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: K6M-BTR1ADV [Midland Europe srl] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature)

Midland Europe srl Via Roberto Sevardi, 7 Mancasale, Reggio Emilia 42100, Italy Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-05-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: K6M-BTR1ADV [Midland Europe srl] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature)

Midland Europe srl Via Roberto Sevardi, 7 Mancasale, Reggio Emilia 42100, Italy 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process FCC ID: K6M-BTR1ADV 2.911(d)(7) USA Designated Agent for Service of Process We, [Midland Europe srl] (“the applicant”) designate [Midland Radio Corporation] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name：Midland Radio Corporation Address: 5900 Parretta Drive，Kansas City, MO 64120-2134，United States FRN: 0032804825 Contact Name: Butch Rittmann Telephone No: (816) 241-8500 Email: [email protected] Applicant Company name: Midland Europe srl Address:Via Roberto Sevardi, 7 Mancasale, Reggio Emilia 42100, Italy Contact Name: Rebecca Bardella Telephone No: +390522509432 Email: [email protected] Signature: Signature: Date:2023-07-06 Date: 2023-07-06 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-communications-supply-c hain-through-the

Midland Europe srl Via Roberto Sevardi, 7 Mancasale, Reggio Emilia 42100, Italy Agent Authorization Company: Midland Europe srl Address: Via Roberto Sevardi, 7 Mancasale, Reggio Emilia 42100, Italy Product Name: BTR1 Advanced Model Number(s): BTR1 Advanced Product Description: BTR1 Advanced We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-07-07 Name: Rebecca Bardella Company: Midland Europe srl

Midland Europe srl Via Roberto Sevardi, 7 Mancasale, Reggio Emilia 42100, Italy Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-07-05 Subject; Request for Confidentiality FCC ID: K6M-BTR1ADV To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Rebecca Bardella

Report No.: AGC05067230402AP02 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC05067230402AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC05067230402AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC05067230402AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 40mm&20mm FCC ID: K6M-BTR1ADV

Report No.: AGC05067230402AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC05067230402AP02 Page 2 of 4 BATTERY VIEW OF EUT PORT VIEW OF EUT Report No.: AGC05067230402AP02 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) BT Antenna Report No.: AGC05067230402AP02 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) ****************************************End of Report*************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description BTR1 Advanced Model Name BTR1 Advanced FCC ID K6M-BTR1ADV 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BR/EDR: P t =9.310dBm=8.531mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(8.531mW /5mm) .[√2.441GHz)]=2.666<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. BLE 1M: P t =8.620dBm=7.278mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(7.278mW /5mm) .[√2.440GHz)]=2.274<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

Page 1 of 67 FCC Test Report Report No.: AGC05067230402FE03 FCC ID : K6M-BTR1ADV APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : BTR1 Advanced BRAND NAME : Midland MODEL NAME : BTR1 Advanced APPLICANT : Midland Europe srl DATE OF ISSUE : May 19, 2023 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05067230402FE03 Page 2 of 67 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / May 19, 2023 Valid Initial Release Report No.: AGC05067230402FE03 Page 3 of 67 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. RECEIVER INPUT BANDWIDTH .............................................................................................................. 7 2.4. EXAMPLE OF A HOPPING SEQUENCY IN DATA MODE ......................................................................... 7 2.5. EQUALLY AVERAGE USE OF FREQUENCIES AND BEHAVIOUR ......................................................... 7 2.6. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 2.7. TEST METHODOLOGY ............................................................................................................................. 8 2.8. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.9. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.10. ANTENNA REQUIREMENT..................................................................................................................... 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 9 4. DESCRIPTION OF TEST MODES ................................................................................................................. 10 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 11 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 11 5.2. EQUIPMENT USED IN TESTED SYSTEM .............................................................................................. 11 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 11 6. TEST FACILITY .............................................................................................................................................. 12 7. PEAK OUTPUT POWER ................................................................................................................................ 13 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 13 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 13 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 14 8. 20DB BANDWIDTH ........................................................................................................................................ 19 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 19 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 19 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 20 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 25 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 25 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 25 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 25 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 25 10. RADIATED EMISSION ................................................................................................................................. 46 10.1. MEASUREMENT PROCEDURE ........................................................................................................... 46 10.2. TEST SETUP ......................................................................................................................................... 48 Report No.: AGC05067230402FE03 Page 4 of 67 10.3. LIMITS AND MEASUREMENT RESULT ............................................................................................... 49 10.4. TEST RESULT........................................................................................................................................ 49 11. NUMBER OF HOPPING FREQUENCY .....................................................................................…

Text truncated - open the document above for the full version.

Wired antenna for Mesh2.4 GHz Technical Specification Value Low, medium, high Antenna gain: 2402 MHz = 3.12dBi 2440 MHz = 3.16dBi 2480 MHz = 3.2dBi 2402 MHz- 2480 MHz 3.16dBi, 225° 3.12dBi, 270° 3.2dBi, 315°

Report No.: AGC05067230402AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC05067230402AP02 Page 2 of 2 RF CONDUCTED TES SETUP ****************************************End of Report*************************************