Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 6 | 22 | 826.4 MHz - 846.6 MHz | 251.00 mW | 4M15F9W | 0.1
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesPower listed is conducted. This modular approval is limited to installation in Grantee�s product described in this filing. Grantee must ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 850MHz Cellular and 1900 MHz PCS operations.
For use in RF exposure portable conditions: SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this filing with FCCID: KBCIX100XUSI-WLBT ; other co-located configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported co-located SAR levels are: Part 22: Body: 1.22 W/kg, and Part 24 Body: 0.72 W/kg.
For use in RF exposure mobile conditions: For vehicle-mounted operations, the antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of �2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
