KBCIX270-BT2022IX270-BT2022

Getting Started This online document, GoBook XR-1 Help , contains all the information you need to set up and use your GoBook XR-1. For information on printing, navigating or otherwise using GoBook XR-1 Help, see the How to Use This Help System topics. If you have suggestions for how we may improve this document, please see Documentation Feedback. Unpacking Your System Inside your packaging you will find: Standard Parts Standard Features O ptional Features GoBook ® XR-1 Help 72_0130_001 2006-07-10 © 2006 Itronix Corporation. All rights reserved. GoBook ® XR-1 Help Page 1 of 92GoBook XR-1 Help 8/3/2006file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh2D1C.htm Optional Parts and Accessories Where to Look For Information About Your Computer About Windows Startup Problems? If your computer does not startup properly, try these solutions first: z Connect the AC adapter to charge the battery if it is not charged NOTE If the AC adapter is connected and functioning properly, the Power LED on the AC adapter should be lit as well as the External Power LED on the GoBook XR-1. z If the AC adapter is connected but the unit will still not turn on, make sure the electrical outlet you are using works z Check to make sure the battery is installed and charged properly z If the battery does not begin charging, perform the following: 1. Remove the battery. 2. Connect the AC adapter. 3. Turn on the computer by pressing the Power Button . 4. Reinstall the battery. The Battery LED is a steady green while the battery is charging. 72_0130_001 2006-07-10 © 2006 Itronix Corporation. All rights reserved. GoBook ® XR-1 Help 72_0130_001 2006-07-10 © 2006 Itronix Corporation. All rights reserved. GoBook ® XR-1 Help Page 2 of 92GoBook XR-1 Help 8/3/2006file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh2D1C.htm Safety Read these instructions carefully. Following these guidelines will help prevent damage to your computer and help protect your personal safety. z Read and follow all warnings and instructions marked on the product and noted in this documentation, including the Notices and Compliance section z Follow all warnings and instructions noted in Windows Help and Support , found on the Start Menu z The first time you use your computer, we recommend that you carefully read the section on Power Management to familiarize yourself with basic battery information and ensure optimum performance z CAUTION To reduce the risk of fire, only use a No. 26 AWG or larger telecommunication line cord z CAUTION This notebook computer is designed to be used with the provided dedicated AC Adapter or Vehicle Adapter z Unplug the computer from the power outlet before cleaning. Use a damp cloth for cleaning. Aerosols, solvents, or strong detergents are not recommended cleaning solutions and may void your warranty. For system decontamination recommendations please contact your service technician z Slots and openings in the computer case are for ventilation purposes. Do not block or cover these openings or the system could overheat z Do not place the product on a soft surface such as a bed, sofa, or rug where the ventilation slots and openings may be blocked z Do not place this product near or over a radiator or heat register z Do not place this product in a built-in installation unless proper ventilation is provided z Do not operate the computer at temperatures above 140°F (60°C) or below -10°F (-23C) z Do not store the computer at temperatures above 167°F (75°C) or below -67°F (-55°C) z Do not step on or place anything on the power cord z Do not slam the display lid when you close it z Do not place any object on top of the computer when the display is closed z If you use the computer with an extension cord, ensure that the total ampere ratings of all the devices sharing the extension do not exceed the rating of the extension cord or the rating of the wall outlet Page 3 of 92GoBook XR-1 Help 8/3/2006file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh2D1C.htm z Do not push foreign objects into the computer through any of the slots or openings. Dangerous voltages are present, which could cause electric shock, fire, or damage sensitive components z The computer is designed to withstand spills. If a spill occurs, power off the computer and wipe it down before continuing to use the computer z For best results, use a power strip with a built-in surge protector. Do not use inferior extension cords as this may result in damage to your computer z FAA regulations require that all transmit/receive devices be turned off during flight. If you have radios in your computer (including GPS) and your computer is equipped with a radio on/off switch, please use it to turn your radios off during flight. If you have radios and you do not have a switch to turn the radios off, either leave your computer off during flight or contact your help desk for assistance Service and Upgrade Safety and Precautions z Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks and may void your warranty. Refer all servicing to qualified service personnel z Unplug this product from the wall outlet and refer servicing to authorized service personnel under the following conditions: { When the power cord or plug is damaged or frayed { If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition { If the product exhibits a distinct change in performance, indicating a need for service z Do not upgrade or service this computer without prior authorization from the manufacturer. Damage caused by servicing that is not authorized may void your warranty z Before performing any manufacturer authorized ser…

Text truncated - open the document above for the full version.

209 Dayton Street, Suite 205 Edmonds, WA 98020-3581 425 771-4482 425 486-1933 Fax August 7, 2006 Northwest EMC, Inc. 22975 NW Evergreen Parkway, #400 Hillsboro, OR 97124 % Vicki Albertson Re: Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 1.) Limited Modular Certification for the BlueGiga, Model: BT2022, a frequency hopping spread spectrum Bluetooth module embedded within the IX270. 2.) Co-location with the FCC ID: KBCIX270-MC8765 (WAN), KBCIX270-MC5720 (WAN) and the KBCIX270-WL3945 (ABG WLAN). TCB Committee, On behalf of Itronix Corporation we request a Limited Modular Certification of the embedded FHSS, Bluetooth module installed in the IX270 Rugged PC under rule Part 15.247. We would like this Certification to include Co-location with the three above referenced Limited Modular Certified Intentional Radiators. Exhibits supporting this request for Co-location are submitted with this application. NW EMC, Inc. measured the radiated spurious and band edges for this device covering the requirements for integration of this embedded module into the IX270 host with it’s new antenna. Please let me know if you should require any further information. Best Regards, Rod Munro Agent, Itronix Corp. President, Spectrum Technology, Inc. [email protected]

Northwest EMC TCB Compliance Opinion Rev. 9/15/03 SPTE0017 Information about the Applicant Company Name Spectrum Technology Grantee Itronix Corporation Address 209 Dayton Street Suite #205 City, State, Zip Edmonds, WA 98020 Job Number SPTE0017 Model IX270-BT2022 FCC ID KBCIX270-BT2022 Agent Spectrum Technology Approval Type Original Equipment Class FHSS Rule Part Bluetooth – 15.247 Industry Canada Information Model Industry Canada ID Rule Part Overview On behalf of Itronix Corporation we request a Limited Modular Certification of the embedded FHSS, Bluetooth module installed in the IX270 Rugged PC under rule Part 15.247. We would like this Certification to include Co-location with the three above referenced Limited Modular Certified Intentional Radiators. Exhibits supporting this request for Co-location are submitted with this application. NW EMC, Inc. measured the radiated spurious and band edges for this device covering the requirements for integration of this embedded module into the IX270 host with it’s new antenna. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature 8/12/2006 Dean Ghizzone, TCB Committee Northwest EMC TCB Compliance Opinion Rev. 9/15/03 SPTE0017 Findings Opinions Specification Requirements Description General Confidentiality Opinion The applicant has provided a revised exhibit to address the deficiency. Discussion The Bluetooth report you submitted includes the Operational Description you have requested be held confidential. I think it makes sense to either pull that information from the report or not request confidentiality. Reference Revised report Opinions Specification Requirements Description DA 00-1407 In order to obtain a modular transmitter approval, a cover letter requesting modular approval must be submitted and the numbered requirements identified below must be addressed in the application for equipment authorization Opinion No letter included - The applicant has provided a revised exhibit to address the deficiency. Discussion Completed Reference Revised report Opinions Specification Requirements Description 47 Cfr 2.1033(b)(3) Installation guide, operating instructions,user manual Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf Specification Requirements Description 47 Cfr 2.1033(b)(4) Operational description Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Operational Description.pdf Specification Requirements Description 47 Cfr 2.1033(b)(5) Frequency block diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Block Diagram.pdf,Schematics.pdf Northwest EMC TCB Compliance Opinion Rev. 9/15/03 SPTE0017 Specification Requirements Description 47 Cfr 2.1033(b)(5) Schematic diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Block Diagram.pdf,Schematics.pdf Specification Requirements Description 47 cfr 2.1033(b)(6) Test Report Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description 47 Cfr 2.1033(b)(6) Conversions showing how the test results were achieved Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description 47 Cfr 2.1033(b)(7) Internal and external photos Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Internal Photos.pdf, External Photos.pdf Specification Requirements Description Required Exhibit Test Setup Photo Exhibit Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description 47 Cfr 1.1307(b),2.1091,2.1093 RF Exposure Hazzard Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference RF Exposure.pdf Specification Requirements Description 47 Cfr 15.19 Labeling Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf, Label.pdf Northwest EMC TCB Compliance Opinion Rev. 9/15/03 SPTE0017 Specification Requirements Description 47 Cfr 15.21 Information for user Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Page 45 Reference User Manual.pdf Specification Requirements Description 47 Cfr 15.27 Special accessories Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description 47 Cfr 15.33 Frequency range of tests Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description 47 Cfr 15.35 Measurement detectors Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description ANSI C63.4 EUT Ports All EUT ports populated,emissions maximized,Antenna height adjusted Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description 47 Cfr 15.203 Antenna Requirements Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Report-SPTE0017.pdf Specification Requirements Description 47 Cfr 15.…

Text truncated - open the document above for the full version.

NORTHWEST EMC, INC. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 August 23, 2006 RE: FCC ID: KBCIX270-BT2022 During the course of uploading exhibits for this filing, a document was submitted that contained duplicate copies of several exhibits that needed to be held confidential. The individual files were uploaded correctly and confidential treatment was requested, but this one exhibit (file name Test Report 03_0193 Model BT2022 part 2 of 2.pdf, described as Test Report part 2 of 2) contains some of those same documents and needs to be removed. There is nothing in the document that needs to be retained for the filing, as all of the required exhibits were uploaded properly; therefore a replacement document is not necessary. Your efforts in helping us resolve this issue are greatly appreciated. Best regards, Vicki Albertson Northwest EMC, Inc.

Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 1 External Photos IX270 Top View Bottom View, FCC & IC ID Label Location Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 2 IX270 Front View Open Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 3 IX270 Right Side IX270 Left Side Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 4 External Photos –BT2022 Bluetooth Module Embedded in the IX270

Applicant: Itronix Corp. FCC ID: KBCIX270-BT2022, Co-located with KBCIX270-WL3945, KBCIX270-MC5720 & KBCIX270-MC8765 FCC Identifier Label Location Identifier label is located on the bottom of the IX270 Facsimile FCC/IC Identifier labels applicable to the stand-alone model and the three co-located combinations are located on the six following pages: 1.) KBCIX270-BT2022 2.) KBCIX270-BT2022 & KBCIX270-WL3945 3.) KBCIX270-BT2022 & KBCIX270-WL3945 & KBCIX270-MC5720 4.) KBCIX270-BT2022 & KBCIX270-WL3945 & KBCIX270-MC8765 5.) KBCIX270-BT2022 & KBCIX270-MC5720 6.) KBCIX270-BT2022 & KBCIX270-MC8765

Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 1 Internal Photos IX270 IX270-BT2022 module and antenna embedded below a screwed in plastic keyboard cover and an adhesive label on the left side of the IX270 in front of keyboard, Adjacent to the left/right “mouse” buttons BT2022 removed to show antenna PIFA antenna

Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 1 Internal Photos IX270 IX270-BT2022 module and antenna embedded below a screwed in plastic keyboard cover and an adhesive label on the left side of the IX270 in front of keyboard, Adjacent to the left/right “mouse” buttons BT2022 removed to show PIFA antenna Applicant: Itronix, Corporation FCC ID: KBCIX270-BT2022 2 BT2022 Shield removed to BT2022

Applicant: Itronix Corporation FCC ID: KBCIX270-BT2022 Antenna Information Internal Bluetooth Antenna Information FCC ID: KBCIX270-BT2022 Antenna Model Antenna Part No. Frequency (GHz) Antenna Type Antenna Gain (dBi) Well Green Tech. Co. Ltd. IX270-B/T or (R12Y-B/T) TWR12BLPI01A 2.4 – 2.5 PIFA Antenna -2.56 Note: The antenna is embedded within the IX270 and not accessible by the end user without the use of a tool and removing numerous screws.

Applicant: Itronix, Corporation FCC ID: KBCIX270-MC5720 FCC ID: KBCIX270-WL3945 FCC ID: KBCIX270-BT2022 1 Co-Located Exposure Condition Compliance with 47 CFR 15.247(i) “Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter.” The EUT will only be used with a separation distance of 20 centimeters or greater between the antenna and the body of the user or nearby persons and can therefore be considered a mobile transmitter per 47 CFR 2.1091 (b). Calculations are provided for each radio transmitting through its own internal antenna and optional external antenna. The total transmit power is less than 1.5 W (ERP), therefore the EUT is categorically excluded from routine environmental evaluation per 47 CFR 2.1091(c). The MPE estimates are as follows: Table 1 in 47 CFR 1.1310 defines the maximum permissible exposure (MPE) for the general population. The exposure level at a 20 cm distance from the EUT’s transmitting antenna is calculated using the general equation: S = (PG)/4πR 2 Where: S = power density (mW/cm 2 ) P = power input to the antenna (mW) G = numeric power gain relative to an isotropic radiator R = distance to the center of the radiation of the antenna (20 cm = limit for MPE estimates) PG = EIRP Solving for S, the maximum power densities 20 cm from the transmitting antennas are summarized in the tables on the following pages: Applicant: Itronix, Corporation FCC ID: KBCIX270-MC5720 FCC ID: KBCIX270-WL3945 FCC ID: KBCIX270-BT2022 2 MPE Estimates for Self Located Device FCC ID: KBCIX270-MC5720 CDMA Antenna Type Antenna Part No. Transmit Frequency Max Peak Conducted Output Power Antenna Gain Minimum Antenna Cable Loss Power Density @ 20 cm General Population Exposure Limit from 1.1310 Ratio of Power Density to the Exposure Limit IX270 (MHz) (mW) (dBi) (dB) (mW/cm 2 ) (mW/cm 2 ) PRIMARY WAN ANTENNA 59-0521-001R 1875.0 922.57 -1.5 0.89 0.1057 1 0.106 PRIMARY WAN ANTENNA 59-0521-001R 836.0 963.83 1.5 1.50 0.1915 0.55 0.349 External MaxRad BMLPVDB800/1900 1875.0 922.57 3 2.77 0.1978 1 0.198 External MaxRad BMLPVDB800/1900 836.0 963.83 3 3.33 0.1775 0.55 0.309 Worst Case Ratio of Power Density to the Exposure Limit = 0.349 Excerpts from TCB Training, April 3, 2002, “Mobile Transmitters”, Slide 6: “Devices operating in multiple frequency bands ‰ When RF exposure evaluation is required for TCB approval o Separate antennas – estimated minimum separation distances may be considered for the frequency bands that do not require evaluation or TCB approval, however, the estimated distance should take into account the effect of co-located transmitters. (Note 24) Note 24 According to multiple frequency exposure criteria, the ratio of field strength or power density to the applicable exposure limit at the exposure location should be determined for each transmitter and the sum of these ratios must not exceed 1.0 for the location to be compliant .” The sum of the ratio(s) (power density to the exposure limit) does not exceed 1.0; therefore, the exposure condition is compliant with FCC rules. Applicant: Itronix, Corporation FCC ID: KBCIX270-MC5720 FCC ID: KBCIX270-WL3945 FCC ID: KBCIX270-BT2022 3 MPE Estimates for Self Located Device FCC ID: KBCIX270-WL3945 WLAN, IEEE 802.11 (a) (b) & (g) Antenna Type Antenna Part No. Transmit Frequency Max Peak Conducted Output Power Antenna Gain Minimum Antenna Cable Loss Power Density @ 20 cm General Population Exposure Limit from 1.1310 Ratio of Power Density to the Exposure Limit (GHz) (mW) (dBi) (dB) (mW/cm 2 ) (mW/cm 2 ) PiFa MAIN TWR12WIPI02A 5 100 -2.56 6.5 0.002 1 0.002 PiFa MAIN TWR12WIPI02A 2.4 318 -2.72 3.5 0.015 1 0.015 External MaxRad MAXC24503 2.4 318 3 4.6 0.044 1 0.044 External MaxRad BMAXC24505 2.4 318 5 4.6 0.069 1 0.069 Worst Case Ratio of Power Density to the Exposure Limit = 0.069 MPE Estimates for Self Co-located Device FCC ID: KBCIX270-BT2022 Bluetooth Radio Antenna Type Antenna Part No. Transmit Frequency Max Peak Conducted Output Power Antenna Gain Minimum Antenna Cable Loss Power Density @ 20 cm General Population Exposure Limit from 1.1310 Ratio of Power Density to the Exposure Limit (MHz) (mW) (dBi) (dB) (mW/cm 2 ) (mW/cm 2 ) Well Green Technology Co. Ltd. IX270-B/T or R12Y-B/T TWR12BLPI01A 2441 36.22 -2.56 0.69 0.0032 1 0.0032 Worst Case Ratio of Power Density to the Exposure Limit = 0.0032 Applicant: Itronix, Corporation FCC ID: KBCIX270-MC5720 FCC ID: KBCIX270-WL3945 FCC ID: KBCIX270-BT2022 4 Worst Case Co-located Exposure Condition FCC ID: KBCIX270-MC5720 FCC ID: KBCIX270-WL3945 FCC ID: KBCIX270-BT2022 Per Note 24 shown below, the Sum of Worst Case Power Ratios cannot exceed 1.0 CDMA Radio Worst Case Ratio of Power Density to the Exposure Limit 802.11abg Radio Worst Case Ratio of Power Density to the Exposure Limit Bluetooth Radio Worst Case Ratio of Power Density to the Exposure Limit Sum of Worst Case Ratios (Power Density to the Exposure Limit) FCC Limit for Sum of Worst Case Ratios 0.349 0.069 0.0032 0.421 1.0 PASS The results shown in the above table are equivalent to the Sum of the EIRP of the Two Co-located Transmitters (EIRP TX1 + EIRP TX2) compared to the exposure limit. The benefit of this method, is that accounts for transmitters operating at different frequencies against different exposure limits.

Applicant: Itronix, Corporation FCC ID’s: KBCIX270-MC8765, KBCIX270-WL3945, KBCIX270-BT2022 1 Compliance with 47 CFR 15.247(i) “Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter.” The EUT will only be used with a separation distance of 20 centimeters or greater between the antenna and the body of the user or nearby persons and can therefore be considered a mobile transmitter per 47 CFR 2.1091 (b). Calculations are provided for each radio transmitting through its own internal antenna and optional external antenna. The total transmit power is less than 1.5 W (ERP), therefore the EUT is categorically excluded from routine environmental evaluation per 47 CFR 2.1091(c). The MPE estimates are as follows: Table 1 in 47 CFR 1.1310 defines the maximum permissible exposure (MPE) for the general population. The exposure level at a 20 cm distance from the EUT’s transmitting antenna is calculated using the general equation: S = (PG)/4πR 2 Where: S = power density (mW/cm 2 ) P = power input to the antenna (mW) G = numeric power gain relative to an isotropic radiator R = distance to the center of the radiation of the antenna (20 cm = limit for MPE estimates) PG = EIRP Solving for S, the maximum power densities 20 cm from the transmitting antennas are summarized in the tables on the following pages: Applicant: Itronix, Corporation FCC ID’s: KBCIX270-MC8765, KBCIX270-WL3945, KBCIX270-BT2022 2 MPE Estimates for Self Located Device FCC ID: KBCIX270-MC8765 Edge/GSM/GPRS/HSDPA/UMTS Antenna Type Antenna Part No. Transmit Frequency Max Peak Conducted Output Power Antenna Gain Minimum Antenna Cable Loss Power Density @ 20 cm General Population Exposure Limit from 1.1310 Ratio of Power Density to the Exposure Limit IX270 (MHz) (mW) (dBi) (dB) (mW/cm 2 ) (mW/cm 2 ) PRIMARY WAN ANTENNA 59-0521-001R 1850.2 817 -1.5 0.89 0.094 1 0.094 PRIMARY WAN ANTENNA 59-0521-001R 837.0 1611 1.5 1.50 0.320 0.56 0.574 External MaxRad BMLPVDB800/1900 1850.2 817 3 2.77 0.171 1 0.171 External MaxRad BMLPVDB800/1900 837.0 1611 3 3.33 0.297 0.56 0.532 Duty Cycle For GPRS (the worst case) is 0.25% Worst Case Ratio of Power Density to the Exposure Limit = 0.574 Duty Cycle not taken in to account Excerpts from TCB Training, April 3, 2002, “Mobile Transmitters”, Slide 6: “Devices operating in multiple frequency bands ‰ When RF exposure evaluation is required for TCB approval o Separate antennas – estimated minimum separation distances may be considered for the frequency bands that do not require evaluation or TCB approval, however, the estimated distance should take into account the effect of co-located transmitters. (Note 24) Note 24 According to multiple frequency exposure criteria, the ratio of field strength or power density to the applicable exposure limit at the exposure location should be determined for each transmitter and the sum of these ratios must not exceed 1.0 for the location to be compliant .” The sum of the ratio(s) (power density to the exposure limit) does not exceed 1.0; therefore, the exposure condition is compliant with FCC rules. Applicant: Itronix, Corporation FCC ID’s: KBCIX270-MC8765, KBCIX270-WL3945, KBCIX270-BT2022 3 MPE Estimates for Self Located Device FCC ID: KBCIX270-WL3945 WLAN, IEEE 802.11 (a) (b) & (g) Antenna Type Antenna Part No. Transmit Frequency Max Peak Conducted Output Power Antenna Gain Minimum Antenna Cable Loss Power Density @ 20 cm General Population Exposure Limit from 1.1310 Ratio of Power Density to the Exposure Limit (GHz) (mW) (dBi) (dB) (mW/cm 2 ) (mW/cm 2 ) PiFa MAIN TWR12WIPI02A 5 100 -2.56 6.5 0.002 1 0.002 PiFa MAIN TWR12WIPI02A 2.4 318 -2.72 3.5 0.015 1 0.015 External MaxRad MAXC24503 2.4 318 3 4.6 0.044 1 0.044 External MaxRad BMAXC24505 2.4 318 5 4.6 0.069 1 0.069 Worst Case Ratio of Power Density to the Exposure Limit = 0.069 MPE Estimates for Self Co-located Device FCC ID: KBCIX270-BT2022 Bluetooth Radio Antenna Type Antenna Part No. Transmit Frequency Max Peak Conducted Output Power Antenna Gain Minimum Antenna Cable Loss Power Density @ 20 cm General Population Exposure Limit from 1.1310 Ratio of Power Density to the Exposure Limit (MHz) (mW) (dBi) (dB) (mW/cm 2 ) (mW/cm 2 ) Well Green Technology Co. Ltd. IX270-B/T or R12Y-B/T TWR12BLPI01A 2441 36.22 -2.56 0.69 0.003 1 0.003 Worst Case Ratio of Power Density to the Exposure Limit = 0.003 Applicant: Itronix, Corporation FCC ID: KBCIX270-MC8765 FCC ID: KBCIX270-WL3945 FCC ID: KBCIX270-BT2022 4 Worst Case Co-located Exposure Condition FCC ID: KBCIX270-MC8765 FCC ID: KBCIX270-WL3945 FCC ID: KBCIX270-BT2022 Per Note 24 shown below, the Sum of Worst Case Power Ratios cannot exceed 1.0 Edge/GPRS/ GSM Radio Worst Case Ratio of Power Density to the Exposure Limit 802.11abg Radio Worst Case Ratio of Power Density to the Exposure Limit Bluetooth Radio Worst Case Ratio of Power Density to the Exposure Limit Sum of Worst Case Ratios (Power Density to the Exposure Limit) FCC Limit for Sum of Worst Case Ratios 0.574 0.069 0.003 0.6461.0 - PASS The results shown in the above table are equivalent to the Sum of the EIRP of the Two Co-located Transmitters (EIRP TX1 + EIRP TX2) compared to the exposure limit. The benefit of this method, is that accounts for transmitters operating at different frequencies against different exposure limits.

Grantee: ITRONIX Corporation FCC ID: KBCIX270-BT2022 MPE Estimates for Self Co-located Device FCC ID: KBCIX270-BT2022 Bluetooth Radio Antenna Type Antenna Part No. Transmit Frequency Max Peak Conducted Output Power Antenna Gain Minimum Antenna Cable Loss Power Density @ 20 cm General Population Exposure Limit from 1.1310 Ratio of Power Density to the Exposure Limit (MHz) (mW) (dBi) (dB) (mW/cm 2 ) (mW/cm 2 ) Well Green Technology Co. Ltd. IX270-B/T or R12Y-B/T TWR12BLPI01A 2441 36.22 -2.56 0.69 0.0032 1 0.0032 Worst Case Ratio of Power Density to the Exposure Limit = 0.0032

Spectrum Technology IX270-BT2022 June 28, 2006 Report No. SPTE0017 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2006 Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Issue Date: June 28, 2006 Spectrum Technology Model: IX270-BT2022 Emissions Test Description Specification Test Method Pass Fail AC Powerline Conducted Emissions FCC 15.207:2006 ANSI C63.4:2003 AC Powerline Conducted Emissions FCC 15.107 Class B:2006 ANSI C63.4:2003 Spurious Radiated Emissions FCC 15.247:2006 ANSI C63.4:2003 Spurious Radiated Emissions FCC 15.109 Class B:2006 ANSI C63.4:2003 Modifications made to the product See the Modifications section of this report Test Facility The measurement facility used to collect the data is located at: Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400; Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada. Approved By: Greg Kiemel, Director of Engineering This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested, the specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 05/05/03 Revision Number Description Date Page Number 00 None Northwest EMC Accreditations and Authorizations Revision 03/18/05 FCC: Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO /…

Text truncated - open the document above for the full version.