KLS-E5-2McMurdo Smartfind E5, Kannad Marine Automatic EPIRB, Kannad Marine Manual EPIRB, Sailor SE406-II, Simrad EP50

SMARTFIND E5/G5 USER MANUAL m mm mc cc cm mm murdo urdo urdo urdo Ltd LtdLtd Ltd This manual is applicable to both the E5 Smartfind and the G5 Smartfind Plus EPIRBs. The Smartfind Plus contains a GPS receiver for improved positional accuracy; some parts of this manual are applicable only to the Smartfind Plus, and are marked accordingly. APPLICATION This EPIRB (Emergency Position Indicating Radio Beacon) is designed for use in maritime emergencies, and is approved for these contingencies. It is not designed or recommended for use on land or in the air. Use the EPIRB only in situations of grave and imminent danger. Intentional false alerts may result in penalties. REGISTRATION This EPIRB must be registered with the appropriate national authority. The function of the EPIRB is to send an alert to the COSPAS- SARSAT satellites, as described in the Appendix. How soon an alert is received depends on the positions of the satellites at the time, and can be influenced by overhead obstructions aboard the vessel. Rescue time following an alert depends on the overall performance of the Search and Rescue organisations, which is outside the control of McMurdo Ltd. Disclaimer McMurdo Ltd reserves the right to change this specification at any time without notice and hereby specifically disclaims liability for any consequences of such action. IN EMERGENCY Remove the EPIRB completely from its bracket or enclosure Hold the lanyard spool and throw the EPIRB into the water where it will self-activate OR If time permits, pull the tear-off tab up, then press the activation button and slide the switch left Contents 1 Recommendations and safety notices ................................................................2 2 Mandatory Registration.........................................................................................3 2.1 Overview ...........................................................................................................................3 2.2 How to register ..................................................................................................................3 2.3 Warranty form....................................................................................................................4 2.4 Radio licence.....................................................................................................................4 2.5 Sale or transfer..................................................................................................................4 3 Description .............................................................................................................6 3.1 Bulkhead bracket...............................................................................................................8 3.2 Float-free enclosure ..........................................................................................................9 4 Controls................................................................................................................10 4.1 Activation switch..............................................................................................................10 4.2 TEST button ....................................................................................................................10 4.3 Sea switch.......................................................................................................................10 4.4 LEDs................................................................................................................................10 4.5 Buzzer .............................................................................................................................11 5 Operating procedure ...........................................................................................12 5.1 Sinking.............................................................................................................................12 5.2 Abandon ship ..................................................................................................................12 5.3 GPS Operation (Smartfind Plus only)..............................................................................12 5.4 Releasing EPIRB from a bulkhead bracket.....................................................................15 5.5 Releasing EPIRB from an enclosure...............................................................................16 5.6 Manual activation ............................................................................................................16 5.7 Deactivation.....................................................................................................................17 5.8 Re-fitting EPIRB ..............................................................................................................17 6 False alerts ...........................................................................................................21 6.1 Stand down rescue services ...........................................................................................21 6.2 Turn off the EPIRB ..........................................................................................................21 6.3 Dealing with a transmitting EPIRB ..................................................................................22 7 Fully disabling an EPIRB ....................................................................................23 8 Bulkhead bracket installation .............................................................................24 8.1 Siting ...............................................................................................................................24 8.2 Mounting procedure ........................................................................................................24 9 Enclosure installation .........................................................................................26 9.1 Siting .......…

Text truncated - open the document above for the full version.

Kannad Marine EPIRB USER MANUAL This manual is applicable to the Kannad Marine EPIRB Automatic and Manual versions. APPLICATION This EPIRB (Emergency Position Indicating Radio Beacon) is designed for use in maritime emergencies and is approved for these contingencies. It is not designed or recommended for use on land or in the air. Use the EPIRB only in situations of grave and imminent danger. Intentional false alerts may result in penalties. REGISTRATION This EPIRB must be registered with the appropriate national authority. The function of the EPIRB is to send an alert to the COSPAS- SARSAT satellites, as described in the Appendix. How soon an alert is received depends on the positions of the satellites at the time and can be influenced by overhead obstructions aboard the vessel. Rescue time following an alert depends on the overall performance of the Search and Rescue organisations, which is outside the control of Kannad Marine. Disclaimer The information and illustrations contained in this publication are to the best of our knowledge correct at the time of going to print. We reserve the right to change specifications, equipment, installation and maintenance instructions without notice as part of our policy of continuous product development and improvement. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic or otherwise without permission in writing from Kannad Marine. No liability can be accepted for any inaccuracies or omissions in the publication, although every care has been taken to make it as complete and accurate as possible. IN EMERGENCY Remove the EPIRB completely from its bracket or enclosure Hold the lanyard spool and throw the EPIRB into the water where it will self-activate OR If time permits, pull the tear-off tab up, then press the activation button and slide the switch left Contents 1 Recommendations and safety notices ................................................................2 2 Mandatory Registration.........................................................................................3 2.1 Overview ...........................................................................................................................3 2.2 How to register..................................................................................................................3 2.3 Warranty form....................................................................................................................4 2.4 Radio licence.....................................................................................................................5 2.5 Sale or transfer..................................................................................................................5 3 Description.............................................................................................................6 3.1 Bulkhead bracket...............................................................................................................8 3.2 Float-free enclosure ..........................................................................................................9 4 Controls................................................................................................................10 4.1 Activation switch..............................................................................................................10 4.2 TEST button....................................................................................................................10 4.3 Sea switch.......................................................................................................................10 4.4 LEDs................................................................................................................................10 4.5 Buzzer.............................................................................................................................11 5 Operating procedure...........................................................................................12 5.1 Sinking.............................................................................................................................12 5.2 Abandon ship ..................................................................................................................12 5.3 Releasing EPIRB from a bulkhead bracket.....................................................................15 5.4 Releasing EPIRB from an enclosure...............................................................................16 5.5 Manual activation ............................................................................................................16 5.6 Deactivation.....................................................................................................................17 5.7 Re-fitting EPIRB..............................................................................................................17 6 False alerts...........................................................................................................21 6.1 Stand down rescue services ...........................................................................................21 6.2 Turn off the EPIRB..........................................................................................................21 6.3 Dealing with a transmitting EPIRB ..................................................................................22 7 Fully disabling an EPIRB ....................................................................................23 8 Bulkhead bracket installation.............................................................................24 8.1 Siting ...............................................................................................................................24 8.2 Mounting procedure ..............................................................................................…

Text truncated - open the document above for the full version.

SABIC Innovative Plastics GELOY CR7520 ASA (North America) Categories: Polymer; Thermoplastic; ASA Polymer Material Notes: Information provided by GE Plastics for their North American product line. MatWeb has a separate entry for the European data sheet. Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics. Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. Physical PropertiesMetricEnglishComments Density 1.06 g/cc0.0383 lb/in ³ ASTM D 792 Water Absorption at Saturation 0.550 %0.550 %Equilibrium, 73F; ASTM D 570 Linear Mold Shrinkage 0.00500 - 0.00700 cm/cm0.00500 - 0.00700 in/inFlow, 0.125 inch; ASTM D 955 Melt Flow 7.00 g/10 min7.00 g/10 min220C/10.0 kgf; ASTM D 1238 13.0 g/10 min13.0 g/10 min260C/5.0 kgf; ASTM D 1238 Mechanical PropertiesMetricEnglishComments Hardness, Rockwell R 8686ASTM D 785 Tensile Strength at Break 34.5 MPa5000 psiType I, 2.0 in/min; ASTM D 638 Tensile Strength, Yield 41.4 MPa6000 psiType I, 2.0 in/min; ASTM D 638 Elongation at Break 40.0 %40.0 %Type I, 2.0 in/min; ASTM D 638 Tensile Modulus 1.79 GPa260 ksi2.0 in/min; ASTM D 638 Flexural Modulus 1.79 GPa260 ksi0.05 in/min, 2" span; ASTM D 790 Flexural Yield Strength 58.6 MPa8500 psi0.05 in/min, 2" span; ASTM D 790 Gardner Impact 25.4 J @Temperature 22.8 °C 18.7 ft-lb @Temperature 73.0 °F Instrumented Impact Total Energy; ASTM D 3763 Izod Impact, Notched 3.20 J/cm6.00 ft-lb/in73F; ASTM D 256 Izod Impact, Notched, Low Temp 0.587 J/cm1.10 ft-lb/inat -22F; ASTM D 256 Electrical PropertiesMetricEnglishComments Surface Resistivity per Square >= 1.00e+15 ohm>= 1.00e+15 ohmASTM D 257 Dielectric Constant 3.21 @Frequency 1e+6 Hz 3.21 @Frequency 1e+6 Hz ASTM D 150 5.20 @Frequency 50 Hz 5.20 @Frequency 50 Hz ASTM D 150 Dielectric Strength 16.0 kV/mm406 kV/inin oil, 125 mils; ASTM D 149 Dissipation Factor 0.0260 @Frequency 1e+6 Hz 0.0260 @Frequency 1e+6 Hz ASTM D 150 0.150 @Frequency 50 Hz 0.150 @Frequency 50 Hz ASTM D 150 Comparative Tracking Index >= 600 V>= 600 V(+/- 0.125 inch); PLC Code 0; UL 746A Hot Wire Ignition, HWI 15.0 - 30.0 sec15.0 - 30.0 sec(+/- 0.125 inch); PLC Code 3; UL 746A High Amp Arc Ignition, HAI >= 120 arcs>= 120 arcsSurface (+/- 0.125 inch); PLC Code 0; UL 746A Thermal PropertiesMetricEnglishComments CTE, linear 84.6 μ m/m- °C @Temperature -30.0 - 0.000 °C 47.0 μ in/in- °F @Temperature -22.0 - 32.0 °F Flow Direction; ASTM E 831 86.4 μ m/m- °C @Temperature -40.0 - 37.8 °C 48.0 μ in/in- °F @Temperature -40.0 - 100 °F Flow Direction; ASTM E 831 90.0 μ m/m- °C @Temperature 0.000 - 100 °C 50.0 μ in/in- °F @Temperature 32.0 - 212 °F Flow Direction; ASTM E 831 CTE, linear, Transverse to Flow 91.8 μ m/m- °C @Temperature -40.0 - 37.8 °C 51.0 μ in/in- °F @Temperature -40.0 - 100 °F ASTM E 831 Deflection Temperature at 0.46 MPa (66 psi) 87.8 °C 190 °F 0.125 inch, unannealed; ASTM D 648 90.6 °C 195 °F 0.250 inch, unannealed; ASTM D 648 Deflection Temperature at 1.8 MPa (264 psi) 76.7 °C 170 °F 0.125 inch, unannealed; ASTM D 648 79.4 °C 175 °F 0.250 inch, unannealed; ASTM D 648 95.6 °C 204 °F 0.250 inch, annealed; ASTM D 648 Vicat Softening Point 99.4 °C 211 °F Rate B; ASTM D 1525 UL RTI, Electrical 50.0 °C 122 °F UL 746B UL RTI, Mechanical with Impact 50.0 °C 122 °F UL 746B UL RTI, Mechanical without Impact 50.0 °C 122 °F UL 746B Flammability, UL94 HBHB0.058 in. Optical PropertiesMetricEnglishComments Gloss 95.0 %95.0 %Untextured, 60 degrees; ASTM D 523 Descriptive Properties UL File Number, USAE121562 MatWeb, Your Source for Materials Information - WWW.MATWEB.COM / Page 1 / 2 Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb. UV-light, water exposure/immersionF2UL746C MatWeb, Your Source for Materials Information - WWW.MATWEB.COM / Page 2 / 2

Product Information Luran ® S 797 S 04/2008ASA BASF SE 67056 Ludwigshafen, Germany Product description Grade with especially high notched impact strength (eg for lighting covers, lawn mower housings). Physical form and storage Luran® S is delivered in the form of cylindrical or spherical pellets. The bulk density of the pellets is from 0.55 to 0.65 g/cm³. Values may differ for special grades. Standard Packaging unit: 25 kg PE-bag on palette, shrunk or wrapped with PE film. In addition, delivery in larger units of up to 1000 kg (IBC = Intermediate Bulk Container) or silo trucks can be arranged. In dry areas with normal temperature control, Luran® S pellets can be stored for relatively long periods of time without any change in mechanical properties. With unstable colours, however, storage over a number of years can give rise to some change in colour. Under poor storage conditions, Luran® S absorbs moisture, but this can be removed by drying. Product safety No adverse effects on the health of processing personnel have been observed where the products are correctly processed and the production areas are suitably ventilated. For styrene, acrylonitrile, and butyl acrylate the maximum allowable workplace concentrations must be observed according to the pertaining national regulations. In Germany, the following limit values are valid TRGS 900 (Aug.2004): styrene, MAK-value: 20 ml/m³; acrylonitrile, TRK-value: 3 ml/m³, and butyl acrylate, MAK-value: 2 ml/m³. According to EU directive 67/548/EEC, Annex I (2001), acrylonitrile is classified as carcinogenic, category 2 ( ́substances which should be regarded as if they are carcinogenic to man ́). Experience has shown that when Luran S is processed correctly with appropriate ventilation, the levels are far below the limits mentioned above. Inhalation of the vapours of degradation products which can arise on severe overheating of the materials or during purging out should be avoided. Our Luran S safety data sheets give further information. These can be downloaded from the Plastics Portal, www.plasticsportal.net. Note The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. In order to check the availability of products please contact us or our sales agency. Luran ® S 797 S BASF SE 67056 Ludwigshafen, Germany Typical values for uncoloured product at 23 °C 1) Test method 2) UnitValues 3) Properties Polymer abbreviation--ASA DensityISO 1183kg/m³1070 Water absorption, equilibrium in water at 23°Csimilar to ISO 62%1.65 Water absorption, 24 h at 23°CISO 62%0.45 Moisture absorption, equilibrium 23°C/50% r.h.similar to ISO 62%0.35 Processing Processing: Injection moulding (M), Extrusion (E), Blow moulding (B)--M Melt volume-flow rate MVR 220 °C/10 kgISO 1133cm³/10min5.5 Pre-drying: Temperature-°C80 Pre-drying: Time-h2 - 4 Melt temperature, injection moulding-°C240 - 280 Mould temperature, injection moulding-°C40 - 80 Moulding shrinkage, free, longitudinal-%0.4 - 0.7 Flammability UL94 rating at 1.6 mm thicknessUL-94classHB Flammability by electrical sources of ignition, Method BH, d = 4 mmIEC 60707classHB Automotive materials (thickness d >=1mm)--+ Mechanical properties Tensile modulusISO 527-1/-2MPa2000 Yield stress, 50 mm/minISO 527-1/-2MPa42 Yield strain, 50 mm/minISO 527-1/-2%3.5 Nominal strain at break, 50 mm/minISO 527-1/-2%11 Tensile creep modulus, 1000 h, strain <= 0.5%, 23°CISO 899-1MPa1100 Flexural strengthISO 178MPa60 Shear modulusISO 6721-2MPa730 Charpy unnotched impact strength (23°C)ISO 179/1eUkJ/m²250 Charpy unnotched impact strength (-30°C)ISO 179/1eUkJ/m²180 Charpy notched impact strength (23°C)ISO 179/1eAkJ/m²40 Charpy notched impact strength (-30°C)ISO 179/1eAkJ/m²9 Izod notched impact strength, method A (23°C)ASTM D 256J/m600 Ball indentation hardness at 358 N/30 sISO 2039-1MPa65 Thermal properties HDT A (1.80 MPa), measured using dried specimensISO 75-1/-2°C95 HDT B (0.45 MPa), measured using dried specimensISO 75-1/-2°C100 Vicat softening temperature VST/A/50ISO 306°C104 Vicat softening temperature VST/B/50ISO 306°C90 Max. service temperature (short cycle operation)-°C80 Coefficient of linear thermal expansion, longitudinal (23-80)°CISO 11359-1/-2E-4/°C0.8 - 1.1 Thermal conductivityDIN 52612-1W/(m K)0.17 Electrical properties Relative permittivity (100Hz)IEC 60250-3.8 Relative permittivity (1 MHz)IEC 60250-3.3 Dissipation factor (100 Hz)IEC 60250E-490 Dissipation factor (1 MHz)IEC 60250E-4260 Volume resistivityIEC 60093Ohm*m1E12 Surface resisitivityIEC 60093Ohm1E13 Electric strength K20/K20IEC 60243-1kV/mm35 Comparative tracking index, CTI, test liquid AIEC 60112-600 Footnotes 1) If product name or properties don't state otherwise. 2) Specimens according to CAMPUS. 3) The asterisk symbol '*' signifies inapplicable properties.

Product safety information EPIRB5 Product Family 82-E5/G5-PSI Issue 7 Page 1 of 3 SmartFind E5 EPIRB 82-800-004A 82-800-003A SmartFind G5 EPIRB 82-800-002A 82-800-001A SmartFind A5 EPIRB 82-803A SmartFind A5G EPIRB 82-803-002A Manual EPIRB K82-804-003A Automatic EPIRB K82-804-004A SPORT K82-808-001A SPORT+ K82-808-002A SIMRAD variants EP50 EPIRB 82-802-004A 82-802-003A EG50 EPIRB 82-802-002A 82-802-001A SAILOR variants SE406-II EPIRB 82-801-004A 82-801-003A SGE406-II EPIRB 82-801-002A 82-801-001A Manufacturer: McMurdo Ltd Silver Point, Airport Service Road, Portsmouth, UK PO3 5PB Emergency Contact: USA 800 535 5053 or 800 323 3500 non-USA +44 (0) 23 92623900 or +44 (0) 7738 046584 or +44 (0) 7866 913321 or +44 (0) 7791 256182 Description: the product is a marine emergency distress beacon powered by Lithium batteries. Sealed inside the product, the batteries are in three packs each containing three small hermetically-sealed pressurised primary Lithium – Manganese Dioxide cells. Each pack has its own heat-shrunk plastic casing, and incorporates physical and electrical short-circuit protection. Use Information The batteries in this product have a limited service life: see label for expiry date. The product contains no user-serviceable parts. The product should only be disassembled by qualified service personnel. DO NOT ATTEMPT TO RECHARGE THE BATTERIES. Product safety information EPIRB5 Product Family 82-E5/G5-PSI Issue 7 Page 2 of 3 Hazardous Substances Under EC and US legislation this product is classified as a manufactured article, which does not result in exposure to any hazardous chemicals under normal conditions of use. As such the product does not require a Material Safety Data Sheet, and the following information is provided as a courtesy: The Lithium content of each battery pack within the product is less than 2.0 g. The cells within the product may contain the following active ingredients, by CAS number and name: 1313-13-9 Manganese Dioxide 108-32-7 Propylene Carbonate 110-71-4 1,2-Dimethoxy Ethane 7439-93-2 Lithium Metal 7791-03-9 Lithium Perchlorate 33454-82-9 Lithium Trifluoromethane Sulfonate No chemical hazard will be posed as long as the cells remain in their sealed condition. This information is given in good faith, and is believed to be accurate at the date of preparation. McMurdo Ltd makes no warranty, either express or implied, with respect to this information, and disclaims all liability from reference on it. Transport Information The product meets exemption SP A188 of the hazardous transportation regulations for categories: UN3091 (Lithium Metal Batteries contained in equipment). UN Hazard Code: Class 9 UN Hazard Class: not restricted UN Number: UN3091 UN Name: Lithium Metal Batteries contained in equipment Packaging Group: II UN Packing Instruction: PI 970 Disposal Information DO NOT INCINERATE. DO NOT DISCARD IN DOMESTIC WASTE. At the end of the product’s useful life, it is vital that the battery packs be disconnected from the main unit to prevent false alarms. False alarms cause expensive disruption to Search and Rescue services and may endanger lives as a consequence. Instructions on battery removal can be found in the End Of Life Statement in the product User Manual. This operation should only be performed by qualified service personnel. This product should be disposed of in a sensible and considerate manner, and in accordance with local regulations. Take it to a civil recycling facility, or contact McMurdo for advice. Product safety information EPIRB5 Product Family 82-E5/G5-PSI Issue 7 Page 3 of 3 Green Passport: Ship Recycling Information McMurdo Ltd hereby declares potentially hazardous content in some of its electronic products. Small amounts of the following substances may be present: beryllium oxide, lithium, lead (in older products), brominated flame retardants, glass. In keeping with European directive 2002/96/EC (Waste Electronic and Electrical Equipment) and the provisions of IMO Resolution A.962(23) (Guidelines On Ship Recycling), McMurdo strongly recommends that its products, including any battery packs, be disposed of in a considerate and legal manner. Additional information, concerning the disposal of equipment can also be found in the relevant McMurdo equipment User Manual, under the heading: End of Life Statement.

Product safety information E5 / G5 / A5 EPIRB Battery Kits 82-E5/G5B1-PSI Issue 6 Page 1 of 2 E5 / G5 / A5 EPIRB Battery Kits McMurdo and Sailor variants 82-970A Simrad variants 82-1001A Kannad Marine variants K82-1057A Manufacturer: McMurdo Ltd Silver Point, Airport Service Road, Portsmouth, UK PO3 5PB Emergency Contact: USA 800 535 5053 or 800 323 3500 non-USA +44 (0) 23 92623900 or +44 (0) 7738 046584 or +44 (0) 7866 913321 or +44 (0) 7791 256182 Description: the product is a replacement Battery Kit for a range of marine emergency distress beacons. The Kit consists of three separate battery packs mounted in a plastic cradle. Each pack contains three small hermetically-sealed pressurised primary Lithium – Manganese Dioxide cells, enclosed within a single heat-shrunk plastic casing which incorporates physical and electrical short-circuit protection. Use Information The product has a limited service life: see label for expiry date. The product contains no user-serviceable parts. The product should only be fitted to a beacon by qualified service personnel. DO NOT ATTEMPT TO DISMANTLE. DO NOT ATTEMPT TO RECHARGE THE BATTERIES. Hazardous Substances Under EC and US legislation this product is classified as a manufactured article, which does not result in exposure to any hazardous chemicals under normal conditions of use. As such the product does not require a Material Safety Data Sheet, and the following information is provided as a courtesy: The Lithium content of each battery pack within the product is less than 2.0 g. The cells within the product may contain the following active ingredients, by CAS number and name: 1313-13-9 Manganese Dioxide 108-32-7 Propylene Carbonate 110-71-4 1,2-Dimethoxy Ethane 7439-93-2 Lithium Metal 7791-03-9 Lithium Perchlorate 33454-82-9 Lithium Trifluoromethane Sulfonate Product safety information E5 / G5 / A5 EPIRB Battery Kits 82-E5/G5B1-PSI Issue 6 Page 2 of 2 No chemical hazard will be posed as long as the cells remain in their sealed condition. This information is given in good faith, and is believed to be accurate at the date of preparation. McMurdo Ltd makes no warranty, either express or implied, with respect to this information, and disclaims all liability from reference on it. Transport Information The product meets exemption SP A188 of the hazardous transportation regulations for categories: UN3091 (Lithium Metal Batteries contained in equipment). UN Hazard Code: Class 9 UN Hazard Class: not restricted UN Number: UN3091 UN Name: Lithium Metal Batteries contained in equipment Packaging Group: II UN Packing Instruction: PI 970 Disposal Information DO NOT INCINERATE. DO NOT ATTEMPT TO DISMANTLE. DO NOT DISCARD IN DOMESTIC WASTE. This product should be disposed of in a sensible and considerate manner, and in accordance with local regulations. Take it to a civil recycling facility, or contact McMurdo for advice. Green Passport: Ship Recycling Information McMurdo Ltd hereby declares potentially hazardous content in some of its electronic products. Small amounts of the following substances may be present: beryllium oxide, lithium, lead (in older products), brominated flame retardants, glass. In keeping with European directive 2002/96/EC (Waste Electronic and Electrical Equipment) and the provisions of IMO Resolution A.962(23) (Guidelines On Ship Recycling), McMurdo strongly recommends that its products, including any battery packs, be disposed of in a considerate and legal manner. Additional information, concerning the disposal of equipment can also be found in the relevant McMurdo equipment User Manual, under the heading: End of Life Statement.

CR 2/3 AH Lithium Manganese Dioxide Data Sheet Type Number ................................. Designation IE…

Text truncated - open the document above for the full version.