KVW-QPS201Quick Personnel Security Scanner (for QPS201), Loss Prevention System (for LPS)

R&S ® QPS201 Quick Personnel Security Scanner Getting Started 1179343802 Version 02 (;ÝRV2) This manual contains information about the R&S ® QPS201 and accesories with the following order num- bers: ● R&S®QPS201 (HW 3.30) (order no. 1333.5000K02) ● R&S®QPS201 (HW 3.50) (order no. 1340.0030K02) ● R&S ® LPS (order no. 1340.8001.02) © 2021 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Email: [email protected] Internet: www.rohde-schwarz.com Subject to change – data without tolerance limits is not binding. R&S ® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. 1179.3438.02 | Version 02 | R&S ® QPS201 Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol and without the model designation, e.g. R&S ® QPS201 (HW 3.30) is indicated as R&S QPS. Contents R&S ® QPS201 3Getting Started 1179.3438.02 ─ 02 Contents 1 Safety Instructions.................................................................................5 2 Regulatory Information..........................................................................8 3 Key Features.........................................................................................10 4 EMI Suppression..................................................................................11 5 System Components........................................................................... 12 6 Preparing for Use.................................................................................14 Contents R&S ® QPS201 4Getting Started 1179.3438.02 ─ 02 Safety Instructions R&S ® QPS201 5Getting Started 1179.3438.02 ─ 02 1 Safety Instructions The R&S QPS is manufactured according to the highest technical standards. To use the scanner safely, follow the instructions provided here and throughout the product documentation. Keep the documentation nearby and offer it to other users. Use the scanner only as intended and within its performance limits. The limits are described in the product documentation, such as the data sheet, manuals and this bro- chure. If you are unsure about the appropriate use, contact the Rohde & Schwarz cus- tomer service. Using the scanner requires specialists or specially trained personnel. These users also need sound knowledge of at least one of the languages in which the user interface and the product documentation are available. If any part of the product is damaged or broken, stop using the product. Never open the casing of the scanner or its components. Only service personnel authorized by Rohde & Schwarz are allowed to repair the product. Lifting, carrying and installing the R&S QPS The R&S QPS is heavy and can cause physical injuries when it falls or tips over. Setup and installation must be done by trained staff. Make sure to install the R&S QPS exactly as described in the installation manual. During the installation, make sure that the installation site is only accessible by people working on the installation. Because of its weight, at least two strong people are required to move or install the scanner. Lifting heavy items can cause structural and muscular injuries. You must use the specially designed installation tool if you have to move or lift the scanner panels (R&S QPS-Z800, order no. 1333.5900.02). You must also use the installation tool to install the scanner on the platform. Using the installation tool can pinch your fingers, especially when you attach it to the R&S QPS and when you use the levers. Loose ball-lock pins can cause the panels to fall over during transportation. Make sure that the ball-lock pin is seated correctly whenever you use one. If you have to move the pallet the R&S QPS is delivered on, always use a forklift. During transport, installation or repair, wear appropriate protective clothing that com- plies with your local rules and regulations. If you are unsure of which equipment to use, ask your safety inspector. We recommend to wear: ● Safety shoes with toe cap and ESD protection. ● Protective gloves ESD protected shoes and gloves also protect the hardware from being damaged. Safety Instructions R&S ® QPS201 6Getting Started 1179.3438.02 ─ 02 Installing cables A R&S QPS installation consisting of the scanner, operator touchscreen and monitors requires cable connections (power cables, LAN cables etc.). Make sure to secure all cables on the floor and cover them up. Loose cables are a tripping hazard. Tripping on cables can cause physical injuries. Properly covered cables also minimize the risk of cable damage. Choosing the operating site Use the R&S QPS only indoors. The R&S QPS is not waterproof and water that enters can electrically connect the casing with live parts. This can lead to electric shock, seri- ous personal injury or death if you touch the casing. For more information on environmental operating conditions, such as ambient temper- ature, and humidity, see the data sheet. Supplying the R&S QPS with power You can connect the R&S QPS to the power distribution system normally used to sup- ply energy-consuming equipment, such as household appliances and similar loads. Electrically powered products have risks, such as electric shock, fire, personal injury or even death. Take the following measures for your safety: ● Only use the power cable delivered with the R&S QPS. It complies with country- specific safety requirements. Only insert the plug into an approved grounded outlet. ● For components that need an external AC adapter, only use the one that is deliv- ered with the components. ● Only use intact cables and route them carefully so that they cannot be damaged. Check the power cables regularly to ensure that they are undamaged. ● If the voltage or frequency is higher than 230 V or 50 Hz, the leakage current of the R&S QPS can be above the limits. In that case, a protective ground connection must be established for each panel before connecting them to the mains supply. ● Only connec…

Text truncated - open the document above for the full version.

RSA NDA Jan 2021 Unilateral Non-Disclosure Agreement This Unilateral Non-Disclosure Agreement (“Agreement”), is made and entered into as of (“Effective Date”), by and between Rohde & Schwarz USA, Inc., a Delaware corporation, located at 6821 Benjamin Franklin Dr., Columbia, MD 21046 (“Disclosing Party”), and PARTY B NAME, a STATE OF ORGANIZATION ENTITY TYPE located at ADDRESS (“Receiving Party”). Disclosing Party and Receiving Party are each referred to herein as a “Party” and, jointly, the “Parties”. RECITALS A. Disclosing Party possesses certain Confidential Information (as hereinafter defined). B. Receiving Party desires to receive, review and evaluate the Disclosing Party’s Confidential Information in connection with entering into a potential business relationship related to DESCRIPTION OF PURPOSE (the “Purpose”), subject to and under the protection of this Agreement. NOW, THEREFORE, in consideration of the foregoing premises and mutual covenants and agreements contained herein, the Parties agree as follows: AGREEMENT 1. Confidential Information. As used herein, the term “Confidential Information” shall mean any and all financial, technical, commercial or other information including, but not limited to, trade secrets, customer information, know-how, inventions, samples, processes, documents and software concerning the business or affairs of Disclosing Party or its Affiliates that has been or may hereafter be provided or shown to the Receiving Party or its employees, officers, directors, representatives, agents, or advisors (collectively, “Representatives”), irrespective of the form of the communication, by Disclosing Party, and also includes all notes, analyses, compilations, studies or other material prepared by Receiving Party or its Representatives containing or based, in whole or in part, on any information provided or shown by Disclosing Party. As used herein, the term “Affiliate” means any entity that, directly or indirectly through intermediaries, controls, is controlled by, or is under common control with, the Party. This Agreement imposes no obligation on Disclosing Party to disclose its Confidential Information or to negotiate for, enter into, or otherwise pursue the Purpose. 2. Confidentiality Obligations. Receiving Party shall use Disclosing Party’s Confidential Information solely for the Purpose, and, subject to Section 3, shall not reproduce, disclose, sell, transfer, use or convey in any other manner, in whole or in part, such Confidential Information other than to its Representatives who: (a) need to know such Confidential Information in the course of the performance of their duties in furtherance of the Purpose; (b) are informed of its confidential nature; and (c) are bound by written confidentiality obligations no less protective of Confidential Information than the terms of this Agreement. Receiving Party shall safeguard the Confidential Information against unauthorized use, access, or disclosure with at least the same care as Receiving Party uses to protect its own Confidential Information of a similar nature, but with at least due care of a prudent business entity. Receiving Party shall not exploit Disclosing Party’s Confidential Information for its own benefit or the benefit of another, shall refrain from using such Confidential Information to the detriment of Disclosing Party, and shall be responsible for any breach of this Agreement by its Representatives. Receiving Party must notify Disclosing Party in writing within three (3) days of any use, access, or disclosure that violates this Agreement. The confidentiality RSA Unilateral NDA Jan 2021 2 obligations of this paragraph do not apply where Receiving Party proves by documentary evidence that Confidential Information: (i) was or becomes generally available to the public other than as a result of disclosure by Receiving Party or its Representatives; or (ii) was or becomes available to Receiving Party or its Representatives on a non-confidential basis from a source other than Disclosing Party, provided that such source is not bound by a confidentiality agreement with Disclosing Party or otherwise prohibited from making available the information to Receiving Party or its Representatives by a contractual, legal or fiduciary obligation. 3. Compliance with Legal Requirements. If Receiving Party is or becomes legally compelled to disclose any of Disclosing Party’s Confidential Information due to mandatory legal provisions or any order of a court of competent jurisdiction or a governmental authority, Receiving Party shall, if not prohibited by law, promptly notify Disclosing Party in order to permit Disclosing Party to seek a protective order or take other appropriate action. Receiving Party shall also cooperate in Disclosing Party’s efforts to obtain a protective order or other reasonable assurance regarding the timing, confidential treatment, and content of any legally compelled disclosure. If, in the absence of a protective order, Receiving Party, in the written opinion of its counsel addressed to Disclosing Party shall be compelled as a matter of law to disclose the Confidential Information, Receiving Party, shall disclose to the party compelling disclosure only the part of the Confidential Information as, in the opinion of such counsel, is required by law to be disclosed; provided that Receiving Party shall exercise its reasonable efforts to obtain an order or reasonable assurance that confidential treatment shall be accorded to such Confidential Information. Notwithstanding the foregoing, Receiving Party shall not be restricted from lawfully reporting waste, fraud, or abuse to the appropriate regulatory authority. 4. Destruction. Upon written notice from Disclosing Party, Receiving Party shall promptly: (a) return or destroy all Confidential Information of Disclosing Party received under this Agreement, retaining no copies thereof; (b) destroy all notes, analyses, compilations, studies or other material prepare…

Text truncated - open the document above for the full version.

Justification for requesting permanent confidentiality for internal photos - QPS201 / LPS is operated in restricted access areas - The design of the system prevents easy access to and viewing of internal components, modules, and assemblies. Circuit boards are covered with shielding and back covers on panels of the enclosure. - QPS201 / LPS is serviceable only by Rohde & Schwarz personnel or designated persons who are bound by Non-Disclosure Agreement (NDA). An example of the NDA is provided with this filing for reference. - The internal photographs that are provided with this certification filing are available only to the R&S personnel involved with this FCC Certification. To prevent inadvertent disclosure, each photograph includes a watermark with the following text in diagonal, across the whole photograph: ROHDE & SCHWARZ - PROPRIETARY & CONFIDENTIAL - In addition, the bottom of the photograph contains the following watermark text: ROHDE & SCHWARZ COMPANY PROPRIETARY Unauthorized use, reproduction & distribution is strictly prohibited

saved: 2018-07-05 12:56 AM Page 1 of 4 printed: 2018-07-05 12:56 AM External Pictures – QPS201 11_RSC_QPS_ExternalPictures_01.docx saved: 2018-07-05 12:56 AM Page 2 of 4 printed: 2018-07-05 12:56 AM External Pictures – QPS201 11_RSC_QPS_ExternalPictures_01.docx saved: 2018-07-05 12:56 AM Page 3 of 4 printed: 2018-07-05 12:56 AM External Pictures – QPS201 11_RSC_QPS_ExternalPictures_01.docx saved: 2018-07-05 12:56 AM Page 4 of 4 printed: 2018-07-05 12:56 AM External Pictures – QPS201 11_RSC_QPS_ExternalPictures_01.docx

saved: 2020-09-28 9:12 PM Page 1 of 6 printed: 2020-09-28 9:27 PM Label Format and Location – QPS201 and LPS FCC-label_QPS-LPS_LayoutAndLocation_01.docx FCC Label Layout and location for the QPS201 and LPS This document covers the FCC labels layout and positioning of the 3 devices listed below: R&S Part Number Name it is marketed under note 1333.5000K02 R&S®QPS201 Quick Personnel Security Scanner P1 variant 1340.0030K02 R&S®QPS201 Quick Personnel Security Scanner P2 variant 1340.8001.02 R&S®LPS Loss Prevention System Panel mechanical design the same as QPS201 P2 variant. Label Layout Label dimensions: - 27.5 mm high - 50 mm wide Actual layout of “P1” variant label. P2 variant label will be the same. LPS variant label: The FCC label will be located on each of the QPS (and LPS) Panels, close to the AC power inlet, where other similar notifications are affixed. The location of the FCC label is indicated on the next pages. saved: 2020-09-28 9:12 PM Page 2 of 6 printed: 2020-09-28 9:27 PM Label Format and Location – QPS201 and LPS FCC-label_QPS-LPS_LayoutAndLocation_01.docx QPS201 P1 variant label location The FCC label is integrated along with the other similar notifications. It will be affixed next to the AC power connector, at the back of each of the two panels, on the bottom left corner. saved: 2020-09-28 9:12 PM Page 3 of 6 printed: 2020-09-28 9:27 PM Label Format and Location – QPS201 and LPS FCC-label_QPS-LPS_LayoutAndLocation_01.docx QPS201 P1 variant label location (cont’d) The label will be affixed next to the AC power connector. That area of the panel is behind a cover. In the picture below, the cover has been removed (resting on the right of the picutre). AC power connector Area where FCC and similar notifications are affixed Cover that normally covers AC power cord and labels. saved: 2020-09-28 9:12 PM Page 4 of 6 printed: 2020-09-28 9:27 PM Label Format and Location – QPS201 and LPS FCC-label_QPS-LPS_LayoutAndLocation_01.docx QPS201 P2 variant and LPS variant label location On the QPS201 P2 variant and the LPS, the power connector is on the back of each panel, on the right bottom corner. See next pages for more details AC power connector is behind the cover at the bottom right corner saved: 2020-09-28 9:12 PM Page 5 of 6 printed: 2020-09-28 9:27 PM Label Format and Location – QPS201 and LPS FCC-label_QPS-LPS_LayoutAndLocation_01.docx QPS201 P2 variant and LPS variant label location (cont’d) Picture of the bottom back of the Panel AC power connector is behind the cover at the bottom right corner AC power connector area (back, bottom right corner) Shown with the middle cover removed; no need to remove the middle cover to access the AC power connector area saved: 2020-09-28 9:12 PM Page 6 of 6 printed: 2020-09-28 9:27 PM Label Format and Location – QPS201 and LPS FCC-label_QPS-LPS_LayoutAndLocation_01.docx QPS201 P2 variant and LPS variant label location (cont’d) Pictures of the AC Connector area. The FCC label will be located in this area along with other similar notifications.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation MRA il ac SCC Accredited LAB LAB Accrédité CCN TM Choose Scandinavian trust RADIO TEST REPORT – 398604-1R1TRFWL Type of assessment: Final product testing Applicant for ISED: Product: Rohde & Schwarz Canada, Inc. Quick Personnel Security Scanner Applicant for FCC: Model: Model variant: Rohde & Schwarz USA, Inc. QPS201 LPS FCC ID: IC Registration number: KVW-QPS201 3261A-QPS2XX Specifications: ♦ FCC 47 CFR Part 15, Subpart C, §15.209 ♦ RSS-210 Annex A.1, Issue 10, December 2019 Date of issue: September 8, 2020 Andrey Adelberg, Senior EMC/RF Specialist Tested by Signature David Duchesne, EMC/RF Lab Manager Reviewed by Signature Report reference ID: 398604-1R1TRFWL Page 2 of 32 Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1- 130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Test site identifier Organization Ottawa/Almonte Montreal Cambridge FCC CA2040 CA2041 CA0101 ISED 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 398604-1R1TRFWL Page 3 of 32 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Engineering considerations .................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Section 3. Test conditions .................................................................................................................................................................................... 6 3.1 Atmospheric conditions ........................................................................................................................................................................................... 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Section 4. Measurement uncertainty ................................................................................................................................................................... 7 4.1 Uncertainty of measurement ................................................................................................................................................................................... 7 Section 5. Information provided by the applicant .............................................................................................…

Text truncated - open the document above for the full version.