KXYL2632XXXXDLCD TV

19 20 20 20 20 20 21 21 21 21 21 21 22 22 22 23 23 23 24 24 25 26 27 25 25 25 26 26 26 26 26 26 27 27 27 28 29 28 28 28 28 29 29 2 3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. 5

6 7 8 AC POWER Blue Red IR(Infrared) Sensor: Power On as follows: STANDBY: range of remote control signal IR sensor, IR sensor. On 9 IR Sensor 10 SLEEP 11 channel FAV FAV+, FAV- 12 The sentence should be larger size. 13 14

15 Connect the AC power cable to the TV and switch on the AC Power button on the LCD TV. After doing so, the TV will enter standby mode and the Power LED indicator shows red light. Please select the Menu language you desired as following instructions firstly when using this unit for the first time. Press 16 17 18 TV's control panel 19 TV's control panel 20 from which you can select channels as follows: selected channel. to make a change. Spanish. restore 21 options Press Enter to select among Bule Screen: / 22 select among and then use the number buttons on the remote control to enter the password for the Parental Control Menu will be displayed. 23 24 the other option will be disabled

25 select among Default, and Font 1~Font 7. TV's control panel VGA setting 26 TV's control panel 27 located on the TV control panel or remote control, Time Set menu and choose the proper one you desired. 28 29 30

CVT Confidential No Disclosure

China GreatWall computer Shenzhen eo.,Ltd Date: Dec,75,2007 To whom it may concem, Declarations FCCID:KXYL2632XxxxD I hereby declare that The 26" and 32' models are electrically identical except for appearance and display. If you have questions or need funher information, please contact the undersigned. Regards,

China greatwall computer Shenzhen Co',Ltd Dec.l5,2007 To whom it may concem, Request for Short-term Confidentiality FCCID:KXYL2632XXxxD Request is hereby submitted by China greatwall computer Shenzhen Co.,Ltd to withhold from public review for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing,certain porions of the application for equipment certification for the referenced FCC identifiers.This request for confidentialiy is made pursuant to 47CFR0.457(d) and 0'459 of FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 45 days from the date ofAuthorization: 1 Schematics 2 Block Diagram 3 Extemal Photos 4 Inemal Photos The rationale for request for confidentiality is as followings: Thc abovc rgfersnggd produot is subject to competition. China greatwall computer Shenzhen Co.,Ltd has lnvested considerable time and materials in resemch and development to ptoduce the referenced product. Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development' Ifyou have questions. ofneed further information, please contact the undersigned' R&D Manager

Front Back Left Right

LCD TV Model No.: L26GAZ5 Power rating: AC100-240V~ 50/60Hz 3.0Amax FCC ID: KXYL2632XXXXD P/N:112XXXX L26GAZ5 LCD COLOR TV

Label location

Internal photo 1 Internal photo 2 Internal photo3 Internal photo4 Internal photo5 Internal photo 6 Whole view of EUT

FUNCTION 26Specifications 32Specifications Display Technology TFT (AUO T26*W02) TFT(AUTO T315*W01-V5) Screen Size 26"widescreen 32"widescreen Resolution 1366*768 1366*768 Peak Brightness(Panel) 550cd/m 2 550cd/m 2 Contrast(Panel) 1000:1 1000:1 Viewing angle 178º/178º 178º/178º Response time 8ms 8ms Panel expected Life-time60,000H 60,000H Display Feature Maximum colors 16,777,216 16,777,216 TV System NTSC-M,ATSC(8VBS&QA M) NTSC-M,ATSC(8VBS&QA M) Multi display modes 4:3,16:9 4:3,16:9 Tuner Digital*1 Digital*1 Video Antenna impedance NTSC&ATSC 75ohm NTSC&ATSC 75ohm NICAM Function mono,stereo,SAPI mono,stereo,SAPI Speaker type Embedded Embedded Maximum audio output 6W*2 6W*2 audio Audio effective SURROND/MUSIC/CI NEMA/SPORT SURROND/MUSIC/CI NEMA/SPORT 75ohm coaxial 1 1 Scart 1(for EU) NO NO HDMI input 2 2 PC in D-Sub 15pin 1 1 PC Audio in 1 1 YPbPr/YCbCr Component video in 2 2 CVBS IN 1RCA Stereo(L/R) 1RCA Stereo(L/R) Connections S-Video 1 1 VGA resolution up to 1360*768/60HZ 1360*768/60HZ Power supply AC100~240V AC100~240V Power consumption 160W 160W VGA & Others Stand by power consumption <2W <2W

1 2 3 4 5 6 ABCD 6 5 4 3 2 1 D CBA + E9 47 0uF-16 V-±20 %-8*9 － 10 5 °C 123 CN4 3PIN-2.54-D-H-M C1 0.1uF-0603-Y5V-+80%-20%-50V PVCC C2 0.1uF-0603-Y5V-+80%-20%-50V +12V ADJBL ON R18 4K7ohm-0603-±5%-1/10W PANEL+5V Q9 PMBT3904 GND +5V R21 10Kohm-0603-±5%-1/10W 123456 CN6 6PIN-2.0-D-H-G R22 22ohm-0603-±5%-1/10W +12VEXT GND C27 0.1uF-0603-Y5V-+80%-20%-50V Q2 PMBT3904 GND R8 10Kohm-0603-±5%-1/10W R15 4K7ohm-0603-±5%-1/10W S 1 S 2 S 3 G 4 D 5 D 6 D 7 D 8 U9AO4405 R19 22Kohm-0603-±5%-1/10W VSEL LCD_PWR_SW 12345678910 CN1 10PIN-2.54-D-H-G 5V POWER ON/OFF' GND GND +12VEXT C76 0.1uF-0603-Y5V-+80%-20%-50V + E6 100uF-16V-±20%-6*7 － 105 °C + E4 100uF-16V-±20%-6*7 － 105 °C R7 10Kohm-0603-±5%-1/10W PWR_SW R2 510ohm-0603-±5%-1/10W R1 510ohm-0603-±5%-1/10W 12 E2 10 0uF -16 V-±20 % -6*7 － 10 5 °C VI 3 VO 2 ADJ 1 U6AZ1117H-3.3(TR)E1 1500mA C3 0.1uF-0603-Y5V-+80%-20%-50V R23 NC/10Kohm-0603-±5%-1/10W Q1 PMBT3906 +5V VCC2_5 VCC3_3 VCC1_8 VI 3 VO 2 ADJ 1 U4 NC/AIC1084-25PM(TR) C10 0.1uF-0603-Y5V-+80%-20%-50V + E7 10 0uF-16 V-±20 %-6*7 － 10 5 °C C9 0.1uF-0603-Y5V-+80%-20%-50V VI 3 VO 2 ADJ 1 U7AZ1117H-3.3(TR)E1 C5 0.1uF-0603-Y5V-+80%-20%-50V + E10 47 0uF-16 V-±20 %-8*9 － 10 5 °C +5VSB PVCC LCD_ON + E11 47 0uF-16 V-±20 %-8*9 － 10 5 °C D2 SK34A-SMA L2 TC5026U-470K-BK/NA BS 1 IN 2 SW 3 GND 4 FB 5 COMP 6 EN 7 NC 8 U5 MP1410ES-LF C75 100pF-0603-NPO-±5%-50V C720.01uF-0603-X7R-±10%-50V R510Kohm-0603-±5%-1/10W R1347Kohm-0603-±5%-1/10WR410Kohm-0603-±5%-1/10W R65.6Kohm-0603-±1%-1/10W R20 NC/100ohm-0603-±5%-1/10W R1410Kohm-0603-±1%-1/10W AD_3.3V F1 3G3A-250V +12V C4 0.1uF-0603-Y5V-+80%-20%-50V C6 0.1uF-0603-Y5V-+80%-20%-50V C160.1uF-0603-Y5V-+80%-20%-50V C700.01uF-0603-X7R-±10%-50V + E8 47 0uF-25 V-±20 %-10 *13 － 10 5 °C C22 0.1uF-0603-Y5V-+80%-20%-50V GND DVD_OP_12V +12V C30 0.1uF-0603-Y5V-+80%-20%-50V C49 NC/0.01uF-0603-X7R-±10%-50V R28 NC/100Kohm-0603-±5%-1/10W Q10 NC/PMBT3904 R27 NC/4K7ohm-0603-±5%-1/10W R26 NC/10Kohm-0603-±5%-1/10W Q11 NC/3401 R30 0ohm-1206-±5%-1/4W DVD_STB L3 GZ1608D121T(F) 123456 CN3 6PIN-2.0-D-H-G GNDGND DVD_OP _12V DVD+5V DVD+5V C31 0.1uF-0603-Y5V-+80%-20%-50V C73 0.01uF-0603-X7R-±10%-50V R29 22Kohm-0603-±5%-1/10W Q12 3401 Q3 PMBT3904 R33 4K7ohm-0603-±5%-1/10W +5V C210.1uF-0603-Y5V-+80%-20%-50V C74 0.1uF-0603-Y5V-+80%-20%-50V C7 0.1uF-0603-Y5V-+80%-20%-50V 5V PANEL+5VPANEL+5V F2 3G3A-250V +5V C34NC/0.01uF-0603-X7R-±10%-50V R31 10Kohm-0603-±5%-1/10W DVD_STB + E5 47 0uF-16 V-±20 %- 8*9 － 10 5 °C C8 0.1uF-0603-Y5V-+80%-20%-50V C230.1uF-0603-Y5V-+80%-20%-50V 12 E13 10 0uF -16 V-±20 % -6*7 － 10 5 °C R36 4K7ohm-0603-±5%-1/10W R35 NC/1Kohm-0603-±5%-1/10W +5V R3NC/10Kohm-0603-±5%-1/10W C77 NC/1uF-0603-Y5V-+80%-20%-10V R225 NC/4K7ohm-0603-±5%-1/10W R75NC/100ohm-0603-±5%-1/10W +5V BL_BR_CNTRL R74NC/10Kohm-0603-±5%-1/10W Q4 NC/PMBT3904 VI 3 VO 2 ADJ 1 U8AZ1117H-2.5(TR)E1 H1TEST H2TEST H3TEST H4TEST Q7 PMBT3904 R155 4K7ohm-0603-±5%-1/10W + E22 100uF-16V-±20%-6*7 － 105 °C L22 CH8010U-470K-037-G + E21 10 0uF -16 V-±20 %-6*7 － 10 5 °C L23 CH8010U-470K-037-G R128? R141? E4110 uF-6.3V-±20 %-A 型 ! CVT Confidential No Disclosure 1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA LVDS_VDD PLL_AVDD1PLL_DVDD ADAC_VDD PLL_AVDD2 C980.01uF-0603-X7R-±10%-50V L4LI0603G121R C970.47uF-0603-Y5V -+80%-20%-10V C960.1uF-0603-Y5V -+80%-20%-50V C870.1uF-0603-Y5V -+80%-20%-50V C900.47uF-0603-Y5V -+80%-20%-10V C1030.1uF-0603-Y5V -+80%-20%-50V C840.47uF-0603-Y5V -+80%-20%-10V C930.1uF-0603-Y5V -+80%-20%-50V L6LI0603G121R C890.1uF-0603-Y5V -+80%-20%-50V C106 0.1uF-0603-Y5V -+80%-20%-50V C1040.47uF-0603-Y5V -+80%-20%-10V C940.1uF-0603-Y5V -+80%-20%-50V L5LI0603G121R C860.47uF-0603-Y5V -+80%-20%-10V C790.47uF-0603-Y5V -+80%-20%-10V Power & GND GND[1] G7 GND[2] G8 GND[3] G9 GND[4] G10 GND[5] G11 GND[6] G12 GND[7] G13 GND[8] G14 GND[9] H7 GND[10] H8 GND[11] H9 GND[12] H10 GND[13] H11 GND[14] H12 GND[15] H13 GND[16] H14 GND[17] J7 GND[18] J8 GND[19] J9 GND[20] J10 GND[21] J11 GND[22] J12 GND[23] J13 GND[24] J14 GND[25] K7 GND[26] K8 GND[27] K9 GND[28] K10 GND[29] K11 GND[30] K12 GND[31] K13 GND[32] K14 GND[33] L7 GND[34] L8 GND[35] L9 GND[36] L10 GND[37] L11 GND[38] L12 GND[39] L13 GND[40] L14 GND[41] M7 GND[42] M8 GND[43] M9 GND[44] M10 GND[45] M11 GND[46] M12 GND[47] M13 GND[48] M14 GND[49] N7 GND[50] N8 GND[51] N9 GND[52] N10 GND[53] N11 GND[54] N12 GND[55] N13 GND[56] N14 GND[57] P7 GND[58] P8 GND[59] P9 GND[60] P10 GND[61] P11 GND[62] P12 GND[63] P13 GND[64] P14 VDD_1V8[1] F7 VDD_1V8[2] F8 VDD_1V8[3] F9 VDD_1V8[4] F10 VDD_1V8[5] F11 VDD_1V8[6] F12 VDD_1V8[7] F13 VDD_1V8[8] F14 VDD_1V8[9] G6 VDD_1V8[10] H6 VDD_1V8[11] J6 VDD_1V8[12] K6 VDD_1V8[13] L6 VDD_1V8[14] M6 VDD_1V8[15] N6 VDD_1V8[16] P6 VDD_1V8[17] R7 VDD_1V8[18] R8 VDD_1V8[19] R9 VDD_1V8[20] R10 VDD_1V8[21] R11 VDD_1V8[22] R12 VDD_1V8[23] R13 VDD_1V8[24] R14 VDD_1V8[25] G15 VDD_1V8[26] H15 VDD_1V8[27] J15 VDD_1V8[28] K15 VDD_1V8[29] L15 VDD_1V8[30] M15 VDD_3V3[1] E8 VDD_3V3[2] E9 VDD_3V3[3] E12 VDD_3V3[4] E13 VDD_3V3[5] F15 VDD_3V3[6] J16 VDD_3V3[7] N16 VDD_3V3[8] T13 VDD_3V3[9] T12 VDD_3V3[10] T8 VDD_3V3[11] T7 VDD_3V3[12] R6 VDD_3V3[13] N5 VDD_3V3[14] M5 VDD_3V3[15] J5 VDD_3V3[16] H5 VDD_2V5[1] F16 VDD_2V5[2] G16 VDD_2V5[3] H16 VDD_2V5[4] K16 VDD_2V5[5] L16 VDD_2V5[6] M16 VDD_2V5[7] P16 VDD_2V5[8] R16 VDD_2V5[9] R15 VDD_1V8[31] N15 VDD_1V8[32] P15 VDD_3V3[17] F6 PLL_AVDD1 C7 PLL_AVDD2 L2 PLL_DVDD K4 PLL_AGND1 A6 PLL_AGND2 K2 PLL_DGND K5 ADAC_VDD E7 ADAC_VSS E6 LVDS_VDD[0] U20 LVDS_VDD[1] U13 LVDS_VDD[2] V13 LVDS_VSS[0] V18 LVDS_VSS[1] U14 LVDS_VSS[2] T14 U1HZR39760 C800.47uF-0603-Y5V -+80%-20%-10V L7LI0603G121R C810.47uF-0603-Y5V -+80%-20%-10V C880.47uF-0603-Y5V -+80%-20%-10V C950.1uF-0603-Y5V -+80%-20%-50V C850.1uF-0603-Y5V -+80%-20%-50V L8LI0603G121R C830.47uF-0603-Y5V -+80%-20%-10V C820.47uF-0603-Y5V -+80%-20%-10V C920.1uF-0603-Y5V -+80%-20%-50V VCC3_3 VCC3_3 VCC1_8 VCC1_8 VCC3_3VCC1_8 VCC1_8 VCC2_5 VCC3_3 VCC1_8VCC3_3 C1020.1uF-0603-Y5V -+80%-20%-50V + E24 47 uF-16 V-±20 %-4*7 － 10 5 °C + E23 10uF-6.3V-±20%-A 型 +5VSB IR_IN +5VSB L IR_IN 12345 CN105PIN-2.0-D-H-G 5V_MCU'GND C320 NC/560pF-06…

Text truncated - open the document above for the full version.

26” LCD TV MODEL 1.Great Wall L26**** The symbol * can be alphanumeric character or blank. The first and second "*"denote different ornament and/or enclosure and the third and fourth "*" denote different colour of enclosure, client or different sales area 2.SOYO MT-****T26**** **: 1st & 2nd * can be alphanumeric character or blank which represent the abbreviation of the brand name. **: 3rd & 4th * can be alphanumeric character or blank which represent the abbreviation of the name of the manufacturer. **: 5th & 6th * can be alphanumeric character or blank which represent porduct model number. **: 7th & 8th * can be alphanumeric character or blank which represent product specification. 3.PRIVE MT-****T26**** **: 1st & 2nd * can be alphanumeric character or blank which represent the abbreviation of the brand name. **: 3rd & 4th * can be alphanumeric character or blank which represent the abbreviation of the name of the manufacturer. **: 5th & 6th * can be alphanumeric character or blank which represent porduct model number. **: 7th & 8th * can be alphanumeric character or blank which represent product specification. 32 1.Great Wall L32**** The symbol * can be alphanumeric character or blank. The first and second "*"denote different ornament and/or enclosure and the third and fourth "*" denote different colour of enclosure, client or different sales area 2.SOYO MT-****T32**** **: 1st & 2nd * can be alphanumeric character or blank which represent the abbreviation of the brand name. **: 3rd & 4th * can be alphanumeric character or blank which represent the abbreviation of the name of the manufacturer. **: 5th & 6th * can be alphanumeric character or blank which represent porduct model number. **: 7th & 8th * can be alphanumeric character or blank which represent product specification. 3.PRIVE MT-****T32**** **: 1st & 2nd * can be alphanumeric character or blank which represent the abbreviation of the brand name. **: 3rd & 4th * can be alphanumeric character or blank which represent the abbreviation of the name of the manufacturer. **: 5th & 6th * can be alphanumeric character or blank which represent porduct model number. **: 7th & 8th * can be alphanumeric character or blank which represent product specification.

Report No.SZEE071115119701 Page 1 of 17 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT UNINTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART B REQUIREMENT OF LCD TV (digital) CRYSTAL SERIES(digital) 26”HD READY LCDTV(digital) 32”HD READY LCD TV(digital) MODEL No.: SEE ANNEX A BRAND NAME: Great Wall/SOYO/prive FCC ID: KXYL2632°°°°D REPORT NO.: SZEE071115119701 ISSUE DATE: December 18, 2007 Prepared for CHINA GREAT WALL COMPUTER SHENZHEN CO.,LTD GREATWALL BUILDING,SCIENCE&INDUSTRIAL PARK,NANTOU,SHENZHEN,CHINA TEL: 86-755-2663 9997 FAX: 86-755-2762 2394 Prepared by CENTRE TESTING INTERNATIONAL 1F., BUILDING C,HONGWEI INDUSTRIAL ZONE, BAOAN 70 DISTRICT, SHENZHEN, CHINA TEL: 86-755-3368 3668 FAX: 86-755-3368 3385 This report shall not be reproduced, except in full, without the written approval of CENTRE TESTING INTERNATIONAL Report No.SZEE071115119701 Page 2 of 17 VERIFICATION OF COMPLIANCE Applicant: CHINA GREAT WALL COMPUTER SHENZHEN CO.,LTD GREATWALL BUILDING,SCIENCE&INDUSTRIAL PARK,NANTOU,SHENZHEN,CHINA Product Name: LCD TV (digital)/CRYSTAL SERIES(digital) 26”HD READY LCDTV(digital)/32”HD READY LCD TV(digital) Brand Name: Great Wall/ SOYO/prive Model Number: See annexA Serial Number: N/A File Number: SZEE071115119701 Date of Test: November 20,2007 ~ December 3 , 2007 We hereby certify that: The above equipment was tested by Centre Testing International (CTI), The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15B The test results of this report relate only to the tested sample identified in this report. Approved By Manager CENTRE TESTING INTERNATIONAL Report No.SZEE071115119701 Page 3 of 17 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .................................................................................................. 4 1.1 PRODUCT DESCRIPTION........................................................................................................................4 1.2 MODEL INFORMATION.........................................................................................................................5 1.3 TEST METHODOLOGY...........................................................................................................................5 1.4 TEST FACILITY.....................................................................................................................................5 1.5 SPECIAL ACCESSORIES........................................................................................................................5 1.6 EQUIPMENT MODIFICATIONS..............................................................................................................5 2. SYSTEM TEST CONFIGURATION ..................................................................................... 6 2.1 EUT CONFIGURATION.........................................................................................................................6 2.2 EUT EXERCISE....................................................................................................................................6 2.3 TEST PROCEDURE.................................................................................................................................6 2.4 LIMITATION..........................................................................................................................................7 2.5 ANTENNA CONDUCTED EMISSION........................................................................................................8 3. SUMMARY OF TEST RESULTS .......................................................................................... 9 4. DESCRIPTION OF TEST MODES ....................................................................................... 9 5. CONDUCTED EMISSIONS TEST ........................................................................................ 9 5.1 MEASUREMENT PROCEDURE: ..............................................................................................................9 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ......................................................................9 5.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................10 5.4 MEASUREMENT RESULT: ...................................................................................................................10 6. RADIATED EMISSION TEST ............................................................................................. 11 6.1 MEASUREMENT PROCEDURE..............................................................................................................11 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................11 6.4 FIELD STRENGTH CALCULATION.......................................................................................................12 7. ANTENNA CONDUCTED POWER .................................................................................... 14 7.1 MEASUREMENT PROCEDURE..............................................................................................................14 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................14 7.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................14 7.4 MEASUREMENT RESULTS:..................................................................................................................14 APPENDIX 1 PHOTOGRAPHS OF SETUP .......................................................................... 15 Report No.SZEE071115119701 Page 4 of 17 1. GENERAL INFORM…

Text truncated - open the document above for the full version.

Report No.SZEE071115119701 Page 16 of 17 RADIATED EMISSION TEST SETUP CONDUCTED EMISSION TEST SETUP