L52CT-DECTMULTICT-DECT Multi

CT-DECT Multi Operating Instructions 2 Contents 1. Technical safety instructions, environment protection, safety at work ...............................................3 2. Description .........................................................................................................................................6 2.1 Technical data ............................................................................................................................7 2.2 Technical description ..................................................................................................................8 3. Operation .........................................................................................................................................10 3.1 First commissioning ..............................................................................................................10 3.1.1 Recharging the NiMH rechargeable batteries....................................................................10 3.1.2 On-air subscription of the CT-DECT Multi (PP) to the CT-DECT Case (8) (FP) ...............12 3.2 Commissioning......................................................................................................................14 3.2.1 Fasten the CT-DECT Multi (PP) on your clothing..............................................................14 3.2.2 Connect the headset to the CT-DECT Multi (PP) ..............................................................14 3.2.3 Switch on CT-DECT Multi (PP) and CT-DECT Case (8) (FP) ...........................................14 3.3 Controls ....................................................................................................................................15 3.4 Operating under special climatic conditions..............................................................................15 4. Maintenance and proper care ..........................................................................................................15 4.1 Visual inspection .......................................................................................................................15 4.2 Cleaning....................................................................................................................................15 4.3 Faults, causes, corrective actions.............................................................................................16 4.4 Storage .....................................................................................................................................16 4.5 Transport and shipping .............................................................................................................16 5. Replacements to be made by the user ............................................................................................16 5.1 Replacing components .............................................................................................................16 3 1. Technical safety instructions, environment protection, safety at work Important Information for Users of the CT-DECT transceivers The CT-DECT transceiver modul has been tested for electromagnetic compatibility and is compliant with the european DECT-Standard. CT-DECT transceivers that are not intrinsically safe (explosion-protected) and therefore do not have any special hazardous duty marking must never be used in potentially explosive atmospheres. Unprotected CT-DECT transceivers can trigger explosions unintentionally in these areas. CeoTronics does not assume any liability for damage to property and personal injuries of any kind that can arise through the above mentioned or any other incorrect use of the CT-DECT transceivers. Important safety instructions For the use of the device notice the national safety and accident prevention regula- tions and the following safety instructions shown in italics in this instruction manual. z Before using CeoTronics products read completely the appropriate operating instructions. If in doubt, ask our technical staff. z If repair work of any kind needs to be done to CeoTronics products, arrange for it to be performed only by the company CeoTronics or by a specialized workshop that is authorized by CeoTronics. In all other cases our warranty and liability for the product shall lapse. z Do not immerse the radio equipment into water. z When using CeoTronics products that are equipped with connection leads ensure that the latter do not get caught up in operational machinery or wheels! z Radio equipment that are not intrinsically safe (explosion-proof) and therefore have no spe- cial explosion-proof designation must never be operated in potentially explosive environ- ments (e.g. when refuelling cars, aircraft etc.). Devices that are not explosion-proof can unin- tentionally trigger off explosions in such areas! z Connect CeoTronics accessories to a device or disconnect them from a device only when the device is switched off. z If you are a cardiac pacemaker carrier, before operating a transmit- ter/receiver ask the manufacturer of your cardiac pacemaker for informa- tion about any impairment that might be caused due to high frequencies. z With radio equipment, volumes of more than 85 dB(A) could be received, however, vol- ume can be adjusted by the user. After switching on the communication system, adjust the receiving volume at about 1/2 level of the maximum possible and check the volume received in your earpiece. Do not set to higher levels than necessary. Very high volumes could damage your sense of hearing, particularly under continuous operation. If volumes or sound levels are high, the use of additional ear plugs is recommended. In case of any doubt, contact your specialist for occupational health and safety or the company physi- cian. 4 z Before starting to operate the device in sensitive areas like e.g. aboard airplanes or in hospitals etc., please check first if it is permitted to use it in these environ…

Text truncated - open the document above for the full version.

ETS Product Service GmbH Eurofins ETS Product Service GmbH Tel +49-33631-888 0 Sitz Reichenwalde Geschäftsführer: Deutschland Fax +49-33631-888 660 Registergericht Hamburg, HRB 103428 Jörg-Timm Kilisch Storkower Str. 38C www.eurofins.com Steuer-Nr.: 06/871/01340 Dr. Matthias-Wilbur Weber D-15526 Reichenwalde b. Berlin www.ets-ps.com Eurofins ETS Product Service GmbH . Storkower Str. 38c . 15526 Reichenwalde Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 ORDER NUMBER REFERENCE OUR REFERENCE DATE -- FCC DE0005 2008-07-11 Subject: Application Error Notification «RFEXP Info not received» Approval Holder:Ceotronics FCC ID: L52CT-DECTMULTI 731 Confirmation Number: TC253825 Dear Sir or Madam, According to your request dated April 15, 2008 and reminder dated July 08, 2008 we herewith explain the exhibit status of above mentioned FCC listing. Following exhibits have been uploaded using false captions: Exhibit Type File Type File Size Description Submission Date Permanent Confidential Short-Term Confidential Supercede Date Available Parts List/Tune Up Info Adobe Acrobat PDF 3581991 PartsList 12/10/2007 Yes No Yes RF Exposure Info Adobe Acrobat PDF 65682 SAR 12/10/2007 No No Yes 12/11/2007 And therefore can be removed from the associated exhibits list. Both files have been replaced by following filing: Exhibit Type File Type File Size Description Submission Date Permanent Confidential Short-Term Confidential Supercede Date Available Parts List/Tune Up Info Adobe Acrobat PDF 65682 PartList 04/17/2008 Yes No No RF Exposure Info Adobe Acrobat PDF 3581991 SAR 04/17/2008 No No No 12/11/2007 uploaded on April 17,2008. Please delete the exhibits flagged “supersede”. Any query, please don’t hesitate to contact us directly. Sincerely, Signature Jörg Kusig Head of Certification Department Eurofins ETS Product Service GmbH

ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 1 of 15 Appendix A. Pictures ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 2 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 3 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 4 of 15

Technical/Operationa Description And Block Diagramms Page 1 of 3 CT-DECT Multi Label Title: CT-DECT Multi Label Date: 24/09/07 Page 2 of 3 Label Example: Maßstab 1:1 Polyester transparency Type structures 0,15 rough: V157 (AUTOTEX) transfer adhesive 3M 467 MP 0,05 writing knows, Background black Individually punched out - + - + - CeoTronics AG Type: CT-DECT Multi 63322 Rödermark/Germany FCC ID: L52CT-DECTMULTI This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any inter ference received including interference that may cause undesired operation. Title: CT-DECT Multi Label Date: 24/09/07 Page 3 of 3 Label Position:

ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 5 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 6 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 7 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 8 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 9 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 10 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 11 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 12 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 13 of 15

ETS PRODUCT SERVICE AG TEST - REPORT SAR Compliance Test Report Test report no.: G0M20707-0013-S-8 SAR ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 660 ETS Product Service AG Registration number: G0M20707-0013-S-8 Page 1 of 28 TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Manufacturer 1.5 Application details 1.6 Test item 1.7 Test results 1.8 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Definitions 2.5 Measurement system description 2.6 Test system specification 2.7 Measurement procedure 2.8 Reference points 2.9 Test positions 2.10 Measurement uncertainty 3 Tissue and system verification 3.1 Tissue verification 3.2 System verification 4 Test Results 5 References 6 Appendix ETS Product Service AG Registration number: G0M20707-0013-S-8 Page 2 of 28 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG: I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualification of all persons taking them. Tester: 06.12.2007 Mr. Cersovsky Date ETS-Lab. Name Signature Technical responsibility for area of testing: 06.12.2007 N. Kaspar Date ETS Name Signature ETS Product Service AG Registration number: G0M20707-0013-S-8 Page 3 of 28 1.2 Testing laboratory 1.2.1 Location ETS PRODUCT SERVICE AG Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telephone : +49 33631 888 00 Fax : +49 33631 888 660 1.2.2 Details of accreditation status ACCREDITED TESTING LABORATORY DAR- REGISTRATION NUMBER: DAT-P-201/96 FCC FILED TEST LABORATORY REG. NO. 96970 B LUETOOTH QUALIFICATION TEST FACILITY (BQTF) A CCREDITED BY BLUETOOTH QUALIFICATION REVIEW BOARD I NDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 A2LA ACCREDITED Certificate Number #1983.01 Statement: The tests documented within this report are carried out in accordance with the scope of accreditation of test laboratory ETS Product Service AG 1.3 Details of approval holder Name : Ceotronics AG Street : Adam-Opel-Str. 6 Town : 63322 Rödermark Country : Germany Telephone : 06074 8751 714 Fax : 06074 8751 718 Contact : Herr Berthold Hemer E-Mail : [email protected] ETS Product Service AG Registration number: G0M20707-0013-S-8 Page 4 of 28 1.4 Manufacturer: (if applicable) Name : Street : Town : Country : 1.5 Application details Date of receipt of application : 20.11.2007 Date of receipt of test item : 20.11.2007 Date of test : 26.11.2007 1.6 Test item Description of test item : UPCS (DECT6.0) Type identification : CT-DECTMULTI Serial number : without; Identical prototype Device category : PUT (Part 15 unlicensed PCS portable TX worn on body) Technical data TX Frequency range : 1921.536 – 1928.448 MHz Max. Conducted RF output power : UPCS / 19,84 dBm (96,38 mW) Power supply : 3.0 V DC Antenna Tx : integral Antenna RX : integral Additional information : ./. ETS Product Service AG Registration number: G0M20707-0013-S-8 Page 5 of 28 1.7 Test Results Max. SAR Measurement (Head) : 0.047 W/kg (averaged over 1 gram) This EUT has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-2003, December 2003. 1.8 Test standards Standards : - Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003 - IEEE Std. 1528-2003, December 2003 FCC Rule Part(s) : - FCC OET Bulletin 65, Supplement C, Edition 01-01 RSS-102 Radio Frequency Exposure Conmpliance of Radiocommunication Apparatus (All Frequency Bands) Issue 2, November 2005 ETS Product Service AG Registration number: G0M20707-0013-S-8 Page 6 of 28 2 Technical test 2.1 Summary of test results Applicable Configuration Handset (Head) Handset (Body) Headset (Head) Body Worn Equipment X EUT complies with the RF radiation exposure limits of the FCC as shown by the SAR measurement results. These measurements are taken to simulate the RF effects exposure under worst-case conditions. The EUT complies with the requirements in respect to all parameters subject to the test. The test results and statements relate only to the item(s) tested. Please note that the absorption and distribution of electromagnetic energy in the body are very complex phenomena that depend on the mass, shape, and size of the body, the orientation of the body with respect to the field vectors, and the electrical properties of both the body and the environment. Other variables that may play a substantial role in possible biological effects are those that characterize the environment (e.g. ambient temperature, air velocity, relative humidity, and body insulation) and …

Text truncated - open the document above for the full version.

ETS PRODUCT SERVICE AG TEST - REPORT FCC PART 15 D for Isochronous UPCS devices RSS-213 for LE-PCS devices FCC ID: L52CT-DECTMULTI Test report no.: G0M20707-0013-C-2 Certificate #1983.01 ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 66 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 1 of 52 TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Application details 1.5 Test item 1.6 Test standards 2 TECHNICAL TEST 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Examinations and Test Procedures 3 RESULTS OF EXAMINATIONS AND TESTS 3.1. Examinations and Test Procedures 3.1.1 Coordination with fixed microwave service, FCC 15.307 (b) 3.1.2 Reference to Subpart B, FCC 15.309 (b) 3.1.3 Conducted limits AC Power line, FCC 15.315, 15.207; RSS-213 4.2; 6.3 3.1.4 Antenna requirement, FCC 15.317, 15.203 3.1.5 Modulation techniques, FCC 15.319 (b); RSS-213 6.1 3.1.6 Emission bandwidth, FCC 15.323 (a); FCC 15.31 (e); RSS-213 6.4 3.1.7 Peak Transmit Power, FCC 15.319 (c); RSS-213 4.3.1, 6:5 3.1.8 Power spectral density, FCC 15.319 (d); RSS-213 4.3.1, 6:6 3.1.9 Directional gain of the antenna, FCC 15.319 (e); RSS-213 4.1 (e) 3.1.10 Automatic discontinuation of transmission, FCC 15.319 (f); RSS-213 4.3.4 (a) 3.1.11 Radio frequency radiation exposure, FCC 15.319 (i); RSS-Gen 5.5 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 2 of 52 3.1.12 Monitoring threshold; Least interfered channel; FCC 15.323 (c)(2); (c)(5) (c)(9); RSS-213 4.3.4 (b)(2) 3.1.13 Monitoring of intended transmit window and maximum reaction time, FCC 15.323 (c)(1); RSS-213 4.3.4 (b)(1) 3.1.14 Monitoring bandwidth, FCC 15.323 (c)(7); RSS-213 4.3.4 (b)(7) 3.1.15 Random waiting interval, FCC 15.323 (c)(6); RSS-213 4.3.4 (b)(6) 3.1.16 Duration of transmission, FCC 15.323 (c)(3); RSS-213 4.3.4 (b)(3) 3.1.17 Connection acknowledgement, Unacknowledged transmissions, FCC 15.323 (c)(4); RSS-213 4.3.4 (b)(5) 3.1.18 Selected channel confirmation, Segment occupancy; FCC 15.323 (c)(5) 3.1.19 Monitoring antenna, FCC 15.323 (c)(8); RSS-213 4.3.4 (b)(8) 3.1.20 Duplex connections, FCC 15.323 (c)(10); RSS-213 4.3.4 (b)(10) 3.1.21 Alternative monitoring interval for co-located devices, FCC 15.323 (c)(11); RSS-213 4.3.4 (b)(11) 3.1.22 Fair access to spectrum related to (c)(10) and (c)(11), FCC 15.323 (c)(12); RSS-213 4.3.4 (b)(12) 3.1.23 Emissions inside and outside the sub-band, FCC 15.323 (d); RSS-213 6.7 3.1.24 Frame period, FCC 323 (e); RSS-213 4.3.(c). 3.1.25 Frequency stability, FCC 323 (f); RSS-213 6.8 3.1.26 Receiver spurious emissions; RSS-213 6.8 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 3 of 52 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has Passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interoperate with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG. Specific Conditions: Usage of the hereunder tested device in combination with other integrated or external antennas requires at least additional output power measurements, spurious emission measurements, conducted emission measurements (AC supply lines) and radio frequency exposure evaluations for each individual configuration are performed, for certification by competent authorities FCC; IC. This report is related to FCC Part 15 D applied to UPCS devices of which technology is derived from DECT standard. Additional this report covers the requirement of RSS-213, 2 GHz Licence exempt Personal Communications Services Devices (LE-PCS) released by Industry Canada (IC). In following the term UPCS covers the term LE-PCS too. Tester: 06.12.2007 W. Treffke Date ETS-Lab. Name Signature Technical responsibility for area of testing: 06.12.2007 N. Kaspar Date ETS Name Signature ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 4 of 52 1.2 Testing laboratory 1.2.1 Location ETS PRODUCT SERVICE AG Storkower Str. 38c 15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 66 1.2.2 Details of accreditation status A CCREDITED TESTING LABORATORY DAR-R EGISTRATION NUMBER: DAT-P-201/96 A CCREDITED NOTIFIED BODY EMC BNetzA-Registration No.: BNetzA-BS EMV-7/61 A CCREDITED NOTIFIED BODY R&TTE BNetzA-Registration number: BNetzA-BS-02/51-53 FCC filed test laboratory Reg. No. 96970 A2LA Accredited Certification #1983.01 Bluetooth Qualification Test Facility (BQTF) Accredited by Bluetooth Qualification Review Board Industry Canada filed test laboratory Reg. No. IC 3470A 1.3 Details of approval holder Name : Ceotronics AG Street : Adam-Opel-Str. 6 Town : 63322 Rödermark Country : Germany Telephone : 06074 8751 714 Fax : 06074 8751 718 Contact : Herr Berthold Hemer Telephone : 06074 8751 714 E-mail : [email protected] ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 5 of 52 1.4 Application details Date of receipt of application : 20.11.2007 Date of receipt of test item : 20.11.2007 Date of test : 22.11.2007 – 23.11.2007 1.5 Test item Description of…

Text truncated - open the document above for the full version.

ETS PRODUCT SERVICE AG TEST - REPORT FCC PART 15 D for Isochronous UPCS devices RSS-213 for LE-PCS devices FCC ID: L52CT-M5CEO1 Test report no.: G0M20707-0026-C-2 Certificate #1983.01 ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 66 ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 1 of 51 TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Application details 1.5 Test item 1.6 Test standards 2 TECHNICAL TEST 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Examinations and Test Procedures 3 RESULTS OF EXAMINATIONS AND TESTS 3.1. Examinations and Test Procedures 3.1.1 Coordination with fixed microwave service, FCC 15.307 (b) 3.1.2 Reference to Subpart B, FCC 15.309 (b) 3.1.3 Conducted limits AC Power line, FCC 15.315, 15.207; RSS-213 4.2; 6.3 3.1.4 Antenna requirement, FCC 15.317, 15.203 3.1.5 Modulation techniques, FCC 15.319 (b); RSS-213 6.1 3.1.6 Emission bandwidth, FCC 15.323 (a); FCC 15.31 (e); RSS-213 6.4 3.1.7 Peak Transmit Power, FCC 15.319 (c); RSS-213 4.3.1, 6:5 3.1.8 Power spectral density, FCC 15.319 (d); RSS-213 4.3.1, 6:6 3.1.9 Directional gain of the antenna, FCC 15.319 (e); RSS-213 4.1 (e) 3.1.10 Automatic discontinuation of transmission, FCC 15.319 (f); RSS-213 4.3.4 (a) 3.1.11 Radio frequency radiation exposure, FCC 15.319 (i); RSS-Gen 5.5 ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 2 of 51 3.1.12 Monitoring threshold; Least interfered channel; FCC 15.323 (c)(2); (c)(5) (c)(9); RSS-213 4.3.4 (b)(2) 3.1.13 Monitoring of intended transmit window and maximum reaction time, FCC 15.323 (c)(1); RSS-213 4.3.4 (b)(1) 3.1.14 Monitoring bandwidth, FCC 15.323 (c)(7); RSS-213 4.3.4 (b)(7) 3.1.15 Random waiting interval, FCC 15.323 (c)(6); RSS-213 4.3.4 (b)(6) 3.1.16 Duration of transmission, FCC 15.323 (c)(3); RSS-213 4.3.4 (b)(3) 3.1.17 Connection acknowledgement, Unacknowledged transmissions, FCC 15.323 (c)(4); RSS-213 4.3.4 (b)(5) 3.1.18 Selected channel confirmation, Segment occupancy; FCC 15.323 (c)(5) 3.1.19 Monitoring antenna, FCC 15.323 (c)(8); RSS-213 4.3.4 (b)(8) 3.1.20 Duplex connections, FCC 15.323 (c)(10); RSS-213 4.3.4 (b)(10) 3.1.21 Alternative monitoring interval for co-located devices, FCC 15.323 (c)(11); RSS-213 4.3.4 (b)(11) 3.1.22 Fair access to spectrum related to (c)(10) and (c)(11), FCC 15.323 (c)(12); RSS-213 4.3.4 (b)(12) 3.1.23 Emissions inside and outside the sub-band, FCC 15.323 (d); RSS-213 6.7 3.1.24 Frame period, FCC 323 (e); RSS-213 4.3.(c). 3.1.25 Frequency stability, FCC 323 (f); RSS-213 6.8 3.1.26 Receiver spurious emissions; RSS-213 6.8 ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 3 of 51 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has Passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interoperate with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG. Specific Conditions: Usage of the hereunder tested device in combination with other integrated or external antennas requires at least additional output power measurements, spurious emission measurements, conducted emission measurements (AC supply lines) and radio frequency exposure evaluations for each individual configuration are performed, for certification by competent authorities FCC; IC. This report is related to FCC Part 15 D applied to UPCS devices of which technology is derived from DECT standard. Additional this report covers the requirement of RSS-213, 2 GHz Licence exempt Personal Communications Services Devices (LE-PCS) released by Industry Canada (IC). In following the term UPCS covers the term LE-PCS too. Tester: 03.09.2007 W. Treffke Date ETS-Lab. Name Signature Technical responsibility for area of testing: 03.09.2007 N. Kaspar Date ETS Name Signature ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 4 of 51 1.2 Testing laboratory 1.2.1 Location ETS PRODUCT SERVICE AG Storkower Str. 38c 15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 66 1.2.2 Details of accreditation status A CCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: DAT-P-201/96 A CCREDITED COMPETENT BODY BNETZA-REGISTRATION NUMBER: BNetzA-zS-026/96 FCC FILED TEST LABORATORY REG. NO. 96970 Bluetooth Qualification Test Facility (BQTF) Accredited by Bluetooth Qualification Review Board (BQRF) I NDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 A2LA ACCREDITED Certificate Number: #1983.01 1.3 Details of approval holder Name : Ceotronics AG Street : Adam-Opel-Str. 6 Town : 63322 Rödermark Country : Germany Telephone : 06074 8751 714 Fax : 06074 8751 718 Contact : Herr Berthold Hemer Telephone : 06074 8751 714 E-mail : [email protected] ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 5 of 51 1.4 Application details Date of receipt of application : 31.07.2007 Date of receipt of test item : 31.07.2007 Date of test : 31.07.2007 – 02.08.2007 1.5 Test item Description of test item : Isochronous UPCS device, cordless phone based on DECT modif…

Text truncated - open the document above for the full version.

ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 14 of 15 ETS Product Service AG Registration number: G0M20707-0013-C-2 Page 15 of 15

ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 5 of 7 ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 6 of 7 ETS Product Service AG Registration number: G0M20707-0026-C-2 Page 7 of 7