LBBGH3100HCordless Phone

/ / 2.4GHz Cordless Telephone with Call Waiting Caller ID and Digital Answering System GH3150 OWNER’ S MANUAL Toll-free Help Line 1-800-366-0937 http://www.swbfreedomphone.com 39 Some states do not allow the exclusion or limitation of special, inci- dental, or consequential damages, so the above limitation or exclu- sion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SOUTHWESTERN BELL FREEDOM PHONE 7475 NORTH GLEN HARBOR BLVD., GLENDALE, AZ 85307 STOP - DON’ T TAKE ME BACK TO STORE. LOOK - FOR THE TOLL-FREE “HELP” TELEPHONE NUMBER. LISTEN -AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call: Southwestern Bell Freedom Phone® Retails Sales Help Line at 1-800-366-0937 Monday- Friday 8:30a.m. - 9:00p.m.EST Saturday 8:30a.m.- 12:30p.m. EST http://www.swbfreedomphone.com SOUTHWESTERN BELL FREEDOM PHONE 7475N. GLEN HARBOR BLVD., GLENDALE, AZ 85307 GH3150 Printed in China IB-5123 PLEASE READ IMPORTANT SAFETY INSTRUCTIONS BE- FORE USE. Congratulations! You have purchased a 2.4GHz Analog Cordless Telephone with Type II Call Waiting Caller ID and Digital Answer- ing System that has been manufactured to the highest standards of SOUTHWESTERN BELL FREEDOM PHONE® Retail Sales. BEFORE INSTALLING AND OPERATING THIS TELEPHONE, IT IS VERY IMPORTANT THAT YOU READ THIS OWNER’ S MANUAL. IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND IN- JURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water, for example, near a bathtub, washbasin, kitchen sink, laundry tub, swimming pool, or in a wet basement. 5. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage. 6. Slots or openings in the cabinet, back and bottom are provided for ventilation, to protect equipment from overheating. These openings must not be blocked or covered. Do not place the product on a bed, or other similar surface where the openings could be blocked. Never place this product near or over a radiator or heat register. 7. Operate this product using only the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not place this product where it could be stepped on and damaged. 9. Do not overload wall outlets and extension cords, as this can re sult in fire or electric shock. 12 10. Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short circuit parts. This could result in fire or electric shock. Never spill liquid of any kind on the product. 11. To reduce the risk of electric shock, do not disassemble this product. Instead, when service or repair work is required, take it to a qualified service technician. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the product has been exposed to rain or water. d. If the product has been dropped or the cabinet has been damaged. e. If the product exhibits a distinct change in performance. If the product does not operate normally and proper operat ing instructions have been followed, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak if you are in the vicinity of the leak. 15. Danger of explosion if battery is incorrectly replaced. Replace battery pack only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer instructions. Safety Instructions for Batteries Handset Battery Pack CAUTION: Use only a Southwestern Bell Freedom Phone approved battery pack in the handset of your GH3150 Analog Cordless Telephone. To re- duce the risk of fire or injury, always do the following when replac- ing, discarding or charging batteries. a. When handling the batteries, be careful not to short circuit the battery with con ducting materials such as rings, bracelets, and keys. The battery or conducting mate rial may overheat and cause burns. b. Use only the following type and size batteries in the cordless phone: c. Self-contained 3-cell Nickel-Cadmium rechargeable the battery type should be AA 3.6V 600mAh.. Do not dispose of the battery pack in a fire. The cell may ex plode. Check with local codes for possible special disposal in structions. d. Do not attempt to open or mutilate the battery pack. The chemicals are dangerous and may cause damage to the eyes or skin, and may be toxic if swallowed. e. Follow the charging instructions outlined in this manual. Save These Instructions Handset Battery Caution CAUTION: To Reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the following type and size batteries in the cordless phone: Self-contained 3-cell …

Text truncated - open the document above for the full version.

2.4GHz Cordless Telephone GH3100 OWNER’S MANUAL Toll-free Help Line 1-800-366-0937 http://www.swbfreedomphone.com 27 SOUTHWESTERN BELL FREEDOM PHONE® 7475 NORTH GLEN HARBOR BLVD., GLENDALE, AZ 85307 STOP - DON’T TAKE ME BACK TO STORE. LOOK - FOR THE TOLL-FREE “HELP” TELEPHONE NUMBER. LISTEN - AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call: Southwestern Bell Freedom Phone Retails Sales Help Line at 1-800-366-0937 Monday - Friday 8:30a.m. - 9:00p.m.EST Saturday 8:30a.m. - 12:30p.m. EST http://www.swbfreedomphone.com SOUTHWESTERN BELL FREEDOM PHONE 7475N. GLEN HARBOR BLVD., GLENDALE, AZ 85307 GH3100Printed in China IB-5120 PLEASE READ IMPORTANT SAFETY INSTRUCTIONS BEFORE USE. Congratulations! You have purchased a 2.4GHz Cordless Tele- phone that has been manufactured to the highest standards of SOUTHWESTERN BELL FREEDOM PHONE ® Retail Sales. BEFORE INSTALLING AND OPERATING THIS TELEPHONE, IT IS VERY IMPORTANT THAT YOU READ THIS OWNER’S MANUAL. IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1.Read and understand all instructions. 2.Follow all warnings and instructions marked on the product. 3.Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.Do not use this product near water, for example, near a bathtub, wash basin, kitchen sink, laundry tub, swimming pool, or in a wet basement. 5.Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage. 6.Slots or openings in the cabinet, back and bottom are provided for ventilation, to protect equipment from overheating. These openings must not be blocked or covered. Do not place the product on a bed, or other similar surface where the openings could be blocked. Never place this product near or over a radiator or heat register. 7.Operate this product using only the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 8.Do not allow anything to rest on the power cord. Do not place this product where it could be stepped on and damaged. 9.Do not overload wall outlets and extension cords, as this can result in fire or electric shock. 12 10.Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short circuit parts. This could result in fire or electric shock. Never spill liquid of any kind on the product. 11.To reduce the risk of electric shock, do not disassemble this product. Instead, when service or repair work is required, take it to a qualified service technician. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 12.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.When the power supply cord or plug is damaged or frayed. b.If liquid has been spilled into the product. c.If the product has been exposed to rain or water. d.If the product has been dropped or the cabinet has been damaged. e.If the product exhibits a distinct change in performance. If the product does not operate normally and proper operating instructions have been followed, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. 13.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14.Do not use the telephone to report a gas leak if you are in the vicinity of the leak. 15.Danger of explosion if battery is incorrectly replaced. Replace battery pack only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Safety Instructions for Batteries Handset Battery Pack CAUTION: Use only a Southwestern Bell Freedom Phone approved battery pack in the handset of your GH3100 Analog Cordless Telephone. To reduce the risk of fire or injury, always do the following when replacing, discarding or charging batteries. a.When handling the batteries, be careful not to short circuit the battery with conducting materials such as rings, bracelets, and keys. The battery or conducting material may overheat and cause burns. b.Use only the following type and size batteries in the cordless phone: Self-contained 3-cell Nickel-Cadmium rechargeable battery supply, AA 3.6V 600mAh. c.Do not dispose of the battery pack in a fire. The cell may explode. Check with local codes for possible special disposal instructions. d.Do not attempt to open or mutilate the battery pack. The chemicals are dangerous and may cause damage to the eyes or skin, and may be toxic if swallowed. e.Follow the charging instructions outlined in this manual. 34 Save These Instructions Handset Battery Caution CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions. 1.Use only the following type and size batteries in the cordless phone: Self-contained 3-cell Nickel-Cadmium rechargeable battery supply, AA 3.6V 600mAH. 2.Do not dispose of the battery (ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3.Do not open or mutilate the battery (ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4.Handle batteries carefully in order to prevent short-circuiting the battery with conducting material such as…

Text truncated - open the document above for the full version.

2.4GHz Cordless Telephone with Call Waiting Caller ID GH3110 OWNER’S MANUAL Toll-free Help Line 1-800-366-0937 http://www/.swbfreedomphone.com PP SOUTHWESTERN BELL FREEDOM PHONE ® 7475 NORTH GLEN HARBOR BLVD., GLENDALE, AZ 85307 STOP - DON'T TAKE ME BACK TO STORE. LOOK - FOR THE TOLL-FREE "HELP" TELEPHONE NUMBER. LISTEN - AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call: Southwestern Bell Freedom Phone ® Retails Sales Help Line at 1-800-366-0937 Monday - Friday 8:30a.m. - 9:00p.m.EST Saturday 8:30a.m. - 12:30p.m. EST http://www.swbfreedomphone.com SOUTHWESTERN BELL FREEDOM PHONE ® 7475N. GLEN HARBOR BLVD., GLENDALE, AZ 85307 GH3110Printed in ChinaIB-5122A PLEASE READ IMPORTANT SAFETY INSTRUCTIONS BEFORE USE. Congratulations! You have purchased a 2.4GHz Analog Cordless Tele- phone with Type II Call Waiting Caller ID that has been manufactured to the highest standards of SOUTHWESTERN BELL FREEDOM PHONE ® Retail Sales. BEFORE INSTALLING AND OPERATING THIS TELEPHONE, IT IS VERY IMPORTANT THAT YOU READ THIS OWNER'S MANUAL. IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water, for example, near a bathtub, wash basin, kitchen sink, laundry tub, swimming pool, or in a wet basement. 5. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage. 6. Slots or openings in the cabinet, back and bottom are provided for ventilation, to protect equipment from overheating. These openings must not be blocked or covered. Do not place the product on a bed, or other similar surface where the openings could be blocked. Never place this product near or over a radiator or heat register. 7. Operate this product using only the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not place this product where it could be stepped on and damaged. 9. Do not overload wall outlets and extension cords, as this can result in fire or electric shock. N O 10. Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short circuit parts. This could result in fire or electric shock. Never spill liquid of any kind on the product. 11.To reduce the risk of electric shock, do not disassemble this product. Instead, when service or repair work is required, take it to a qualified service technician. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the product has been exposed to rain or water. d. If the product has been dropped or the cabinet has been damaged. e. If the product exhibits a distinct change in performance. If the product does not operate normally and proper operating instructions have been followed, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak if you are in the vicinity of the leak. 15. Danger of explosion if battery is incorrectly replaced. Replace battery pack only with the same or equivalent type recommended by the manufacturer. Dispose of used according to the manufacturer instructions. Safety Instructions for Batteries Handset Battery Pack CAUTION: Use only a Southwestern Bell Freedom Phone approved battery pack in the handset of your GH3110 Analog Cordless Telephone. To reduce the risk of fire or injury, always do the following when replacing, discard- ing or charging batteries. a. When handling the batteries, be careful not to short circuit the battery with conducting materials such as rings, bracelets, and keys. The battery or conducting material may overheat and cause burns. b. Use only the following type and size batteries in the cordless phone: Self-contained 3-cell Nickel-Cadmium rechargeable battery type AA 3.6V 600mAh. c. Do not dispose of the battery pack in a fire. The cell may explode. Check with local codes for possible special disposal instructions. d. Do not attempt to open or mutilate the battery pack. The chemicals are dangerous and may cause damage to the eyes or skin, and may be toxic if swallowed. e. Follow the charging instructions outlined in this manual. Save These Instructions Handset Battery Caution CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the following type and size batteries in the cordless phone: Self-contained 3-cell Nickel-Cadmium rechargeable battery type AA 3.6V 600mAH. P Q 2. Do not dispose of the battery (ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery (ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Handle batteries …

Text truncated - open the document above for the full version.

CONTINENTAL CONAIR LIMITED , STAM)AR[) ~ TOWER. YlLENNllN CITY, 388 KWUN TONG ROAD, KWUN ~ KOWlOON. ~ KONG TEL : (862) 2751 4888 fAX: (852)2751 8020 Federal Communications Commission Authorization and Evaluation Division Re: Confidentiality Request regarding application for certification of FCC w: LBBGH3100H Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby request confidential treabnent of infonnation accompanying this application as outlined below: . . . -Schematics -Block Diagram -Operational Description The above materials contain trade se(:rets and proprietary infonnation not customarily released to the public. The public disclosure of these materials may be ham1ful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, . . Ng CoDsumcr Electronics Manager Tel: 852-2751 4688 Fax: 852-27519153 ELECTRONICS DIY8ION

APPENDIX C - EUT PHOTOGRAPHS Handset - Top View (Model: GH3150 & GH3110) Handset – Bottom View (Model: GH3150 & GH3110) FCC ID: LBBGH3100H This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communication may not be ensured when using this phone. Handset - Top View (Model: GH3100) Handset – Bottom View (Model: GH3100) FCC ID: LBBGH3100H This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communication may not be ensured when using this phone.

EXHIBIT A - FCC ID LABEL INFORMATION Proposed FCC ID Label Specifications : Text is black or white in color and is left justified. Labels are silk- screened and shall be “permanently affixed” at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Model: GH3150 & GH3110 Model: GH3100 FCC ID: LBBGH3100H This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept interference received, including interference may cause undesired Privacy of communications may not be when using this 2.1875" 1.0" FCC ID: LBBGH3100H This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communication may not be ensured when using this phone. FCC ID: LBBGH3100H This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Privacy of communication may not

Handset – Cover Off View (Model: GH3150 & GH3110) Handset - Component View I (Model: GH3150 & GH3110) Handset - Component View II (Model: GH3150 & GH3110) Handset - Component View III (Model: GH3150 & GH3110) Handset Transceiver - Component View with Shielding (Model: GH3150 & GH3110) Handset Transceiver - Component View without Shielding (Model: GH3150 & GH3110) Handset Transceiver - Solder View (Model: GH3150 & GH3110) Handset – Cover Off View (Model: GH3100) Handset – Main Board Component View (Model: GH3100) Handset – Main Board Solder View (Model: GH3100) Handset Transceiver - Component View (Model: GH3100) Handset Transceiver – Solder View (Model: GH3100)

Note: This test report is specially limited to the above client company and the product model only. It may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. FCC PART 15 Subpart C EMI MEASUREMENT AND TEST REPORT For Continental Conair Limited 35/F Standard Chartered Tower Millennium City, 388 Kwun Tong Road Kwun Tong, Kowloon, HK FCC ID: LBBGH3100H 2004-04-22 This Report Concerns: Original Report Equipment Type: 2.4GHz Cordless Phone Test Engineer: Ling Zhang / Report No.: R0403232(Handset) Test Date: 2004-04-08 Reviewed By: Hans Mellberg/ Prepared By: Bay Area Compliance Laboratory Corporation 230 Commercial Street Sunnyvale, CA 94085 Tel (408) 732-9162 Fax (408) 732-9164 Continental Conair Limited FCC ID: LBBGH3100H Report # R0403232(Handset)Rpt Page 2 of 23 FCC Part 15.249 Test Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................3 OBJECTIVE...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY..................................................................................................................................................3 TEST FACILITY.............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 DESCRIPTION OF TEST CONFIGURATION......................................................................................................................5 EQUIPMENT MODIFICATIONS.......................................................................................................................................5 CONFIGURATION OF TEST SYSTEM..............................................................................................................................5 TEST SETUP BLOCK DIAGRAM.....................................................................................................................................5 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................6 EXTERNAL I/O CABLING LIST AND DETAILS...............................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 § 15.207 - CONDUCTED EMISSIONS TEST DATA................................................................................................8 MEASUREMENT UNCERTAINTY....................................................................................................................................8 EUT SETUP..................................................................................................................................................................8 SPECTRUM ANALYZER SETUP......................................................................................................................................8 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................................8 TEST PROCEDURE........................................................................................................................................................8 ENVIRONMENTAL CONDITIONS....................................................................................................................................9 SUMMARY OF TEST RESULTS.......................................................................................................................................9 CONDUCTED EMISSIONS TEST DATA (MODEL: GH3150 & GH3110)..........................................................................9 CONDUCTED EMISSIONS TEST DATA (GH3100) ........................................................................................................10 PLOT OF CONDUCTED EMISSIONS TEST DATA...........................................................................................................10 §15.209(A), §15.205 & §15.249 - RADIATED EMISSION DATA ..........................................................................17 MEASUREMENT UNCERTAINTY..................................................................................................................................17 EUT SETUP................................................................................................................................................................17 SPECTRUM ANALYZER SETUP....................................................................................................................................17 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................17 ENVIRONMENTAL CONDITIONS..................................................................................................................................18 TEST PROCEDURE......................................................................................................................................................18 CORRECTED AMPLITUDE & MARGIN CALCULATION.....…

Text truncated - open the document above for the full version.

EXHIBIT B - TEST SETUP PHOTOGRAPHS Conducted Emission - Front View (Model: GH3150 & GH3110) Conducted Emission - Side View (Model: GH3150 & GH3110) Handset Radiated Emission - Front View (Model: GH3150 & GH3110) Handset Radiated Emission - Rear View (Model: GH3150 & GH3110) Conducted Emission - Front View (Model: GH3100) Conducted Emission - Side View (Model: GH3100) Handset Radiated Emission - Front View (Model: GH3100) Handset Radiated Emission - Rear View (Model: GH3100)