LO6-OCR900PPAGING ON-CHANNEL REPEATER (OCRP)

PAGING ON-CHANNEL REPEATER (OCRP) Users Manual 8A535X03 Rev. Preliminary-00 8A535X03 Rev. Preliminary-00 Page 2 of 17 REVISION RECORD REV # ECN # DESCRIPTION DATE Preliminary Original Release March 31, 2008 PROPRIETARY STATEMENT © 2008 Futurecom Systems Group Inc. Printed in Canada. All Rights Reserved No part of this document, or any software included with it, may be reproduced and distributed without the prior written permission of the copyright holder. Futurecom Systems Group Inc. reserves the right to make changes or improvements to the equipment, software or specification described in this document at any time and without prior notice. These changes will be incorporated in the new releases of this document. This document may contain technical inaccuracies or typographical errors. Futurecom Systems Group Inc. waves responsibility for any labour, materials or costs incurred by any party as a result of using this document. 8A535X03 Rev. Preliminary-00 Page 3 of 17 TABLE OF CONTENTS ABOUT THIS DOCUMENT .................................................................................................. 4 Notes, Attentions, Important................................................................................................ 4 SAFETY INFORMATION ..................................................................................................... 5 GENERAL SAFETY INFORMATION.............................................................................. 5 Damage Requiring Service .............................................................................................. 6 OCR TECHNICAL DESCRIPTION ...................................................................................... 9 MAIN FEATURES ............................................................................................................. 9 PRINCIPLE OF OPERATION ......................................................................................... 10 OCR INSTALLATION ......................................................................................................... 11 OCR PROGRAMMING........................................................................................................ 12 INTRODUCTION ............................................................................................................. 12 CONNECTING AND DISCONNECTING THE OCR TO A PC .................................... 12 INSTALLING THE PROGRAMMING SOFTWARE..................................................... 12 USING THE PROGRAMMING SOFTWARE FOR SETTING UP THE OCR.............. 13 Starting up the Programming Software ......................................................................... 13 Using the Programming Software On-Line ................................................................... 13 SETTING UP THE OCR MAXIMUM GAIN .................................................................. 14 Downlink Maximum Gain Setting: ............................................................................... 14 Uplink Maximum Gain Setting: .................................................................................... 14 OCR FRONT PANEL INDICATORS .................................................................................. 16 OCR Specifications ............................................................................................................... 17 8A535X03 Rev. Preliminary-00 Page 4 of 17 ABOUT THIS DOCUMENT This document describes the operation of the Futurecom On-Channel Repeater (OCR). It provides setup guidelines and outlines the programming options, which are accessible through the programming software (6A074X01). Notes, Attentions, Important Throughout this manual, you will see Notes, Attentions and Important. Their meaning is as follows: NOTE A clarifying statement that expands on the text that follows. IMPORTANT An important statement that must be considered and / or implemented in order to achieve adequate equipment operation. ATTENTION! An instruction that must be followed to insure compliance with the appropriate standards or proper equipment operations. 8A535X03 Rev. Preliminary-00 Page 5 of 17 SAFETY INFORMATION NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, can cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ATTENTION! Changes or Modifications not expressly approved by Futurecom Systems Group Inc. could void the user’s authority to operate the equipment. GENERAL SAFETY INFORMATION The following information may or may not be applicable to your product. In any case, precautions should always be taken when handling any electrical product. IMPORTANT This manual contains important safety and operating instructions, therefore keep this manual always on hand! Prior to using any product, follow all warning, safety and operating instructions written on the product and in the Users Manual. All instructions should be saved for reference in the future! ATTENTION! Always keep product dry, never expose to any kind of moisture. Do Not expose product to extreme temperatures - as found near a hot radiator or stove. Do Not expose product to open flames, cigarettes, etc. Precautions should be taken to avoid objects falling or liquids spilling onto product. Do Not incorporate the use of other equipment that is not recommended or sold by the manufacturer. The result may be the risk of fire or electric shock injury. Connect DC power cord to DC power source as marke…

Text truncated - open the document above for the full version.

Mar. 16, 2008 UltraTech Engineering Labs Inc. 3000 Bristol Circle Oakville, ON Canada L6H 6G4 Subject: Equipment Authorization Application under FCC 47 CFR, Parts 2 and 22 (Subpart E) - Paging and Radiotelephone Service Operating in the Frequency Bands 931.0125 - 931.9875 MHz. Applicant: Futurecom Systems Group Inc. Product: PAGING ON-CHANNEL REPEATER (OCRP) Model: OCR 900P FCC ID: LO6-OCR900P Dear Sir/Madam, As appointed agent for Futurecom Systems Group Inc., we would like to submit the application for FCC Equipment Authorization of the above product. Please review all necessary files uploaded to your site. Grant Conditions : o Power listed is conducted. For transmitter mode operation, the maximum allowable ERP power per FCC § 22.535(a) is 3,500 Watts, and for booster/repeater mode, the maximum allowable ERP power per FCC § 22.535(f) is 5 Watts. o The antenna(s) used for this transmitter must be fixed mounted on permanent structures. RF exposure compliance is addressed at the time of licensing, as required by FCC Bureau(s), including antenna co-location requirements of FCC 1.1307(b((3). Yours truly, Dharmajit Solanki RFI Engineer UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R Korea MIC-RRL 2005-82 & 83 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 ATTN: CHIEF CERTIFICATION OFFICER AUTHORITY TO ACT AS AGENT I HEREBY APPOINT ULTRATECH ENGINEERING LABS INC. TO ACT AS OUR AGENT IN THE PREPARATION OF THIS APPLICATION FOR EQUIPMENT CERTIFICATION. I CERTIFY THAT SUBMITTED DOCUMENTS PROPERLY DESCRIBE THE DEVICE OR SYSTEM FOR WHICH EQUIPMENT CERTIFICATION IS SOUGHT. I ALSO CERTIFY THAT EACH UNIT MANUFACTURED, IMPORTED OR MARKETED, AS DEFINED IN FCC’S REGULATIONS WILL HAVE AFFIXED TO IT A LABEL IDENTICAL TO THAT SUBMITTED FOR APPROVAL WITH THIS APPLICATION. I HEREBY CONFIRM THAT WE, FUTURECOM SYSTEMS GROUP UNDERTAKE FULL RESPONSIBILITY TO COMPLY WITH THE TERMS AND CONDITIONS OF FCC CERTIFICATION AS SPECIFIED BY THE ULTRATECH TCB. Dated This Thirty-first Day of March 2008 By: Tony Bombera (Signature) (Print Name) Title: Senior Staff Engineer On behalf of : Futurecom Systems Group Phone No.: 905 660 5548 Fax No.: 905 660 6858 Email : [email protected] 3277 LANGSTAFF ROAD, Concord, Ontario L4K 5P8, Canada, Tel: (905)660-5548 Fax: (905)660-1380

March 31, 2008 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: LO6-OCR900P Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type OCR 900 BLOCK DIAGRAM OCR 900MHz SCHEMATICS OCR Brief Description 900MHz OCR Power Amplifier PARTS LIST OCR Adjustment and Programming The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Tony Bombera, P.Eng. 3277 LANGSTAFF ROAD, Concord, Ontario L4K 5P8, Canada, Tel: (905)660-5548 Fax: (905)660-1380

ANNEX 2 – EXTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A2 - 1 ANNEX 2 – EXTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A2 - 2

FUTURECOM SYSTEMS GROUP Model: OCR 900P Serial No.: FCC ID: LO6-OCR900P REV. ECN DESCRIPTION DATE BY TITLE F.C.F.O SCALE DRAWN BY CHECKED BY 2L535A04 SHT 1 OF 1 OCR 900P FCC/IC LABEL 0.5 in 1.5 in 2L535A04 SHT 1 OF 1 TB Mar. 31, 2008 DESCRIPTION APPROVED CHECKED SCALE DATE DATE A SIZE DRAWNDATE REV DRAWING No. FILE No. SHEET REVISIONS DATE CHECKED F.C.F.O. No. C TOLERANCE ON DECIMALS: ± GENERAL TOLERANCE: ± TOLERANCE ON ANGLES: ± DIMENSIONAL LIMITS AND SURFACE DIMENSIONS ARE IN MILLIMETERS [INCHES]. UNLESS OTHERWISE SPECIFIED BEFORE PROTECTIVE FINISHES ARE MATERIAL/FINISH ROUGHNESS DESIGNATIONS APPLY APPLIED ECN mm/dd/yy OCR FCC/IC LABEL LOCATION 8H535A06 8H535A06.DWG1 of 1 I. DAVIDSON03/09/06 2006 0ORIGINAL ISSUE

REV. ECN DESCRIPTION DATE BY TITLE F.C.F.O SCALE DRAWN BY CHECKED BY 0.5” 1.5 “ 2L074A03 SHT 1 OF 1 LABEL, FCC AJK 26-Jan-01 2L074A03 SHT 1 OF 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

DESCRIPTION APPROVED CHECKED SCALE DATE DATE DATE A SIZE DRAWNDATE REV DRAWING No. FILE No. SHEET REVISIONS DATE APPROVED F.C.F.O. No. C TOLERANCE ON DECIMALS: ± GENERAL TOLERANCE: ± TOLERANCE ON ANGLES: ± DIMENSIONAL LIMITS AND SURFACE DIMENSIONS ARE IN MILLIMETERS [INCHES]. UNLESS OTHERWISE SPECIFIED BEFORE PROTECTIVE FINISHES ARE MATERIAL/FINISH ROUGHNESS DESIGNATIONS APPLY APPLIED ECN UPDATED mm/dd/yy LABEL, OCCUPATIONAL WARNING 2L073A30 2L073A30.DWG 7V073X16 1 of 1 T. BOMBERA07/10/03 T. BOMBERA 07/11/03 T. BOMBERA 07/11/03 2003 0 ORIGINAL ISSUE07/11/03TB 105001 CHANGED LABEL13/01/05TB

ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 1 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 2 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 3 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 4 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 5 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 6 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 7 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 8 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 9 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 10 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 11 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 12 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 13 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 14 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 15 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 16 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 17 ANNEX 3 – INTERNAL EUT PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A3 - 18

8A535X03 Rev. Preliminary-00 Page 6 of 17 IMPORTANT If an outdoor antenna is connected, make sure the system is always grounded to allow for protection against voltage surge and built-up static charges. Outdoor antennas should always be located away from power lines. DAMAGE REQUIRING SERVICE This product should be serviced by qualified service personnel when: ‰ Objects have fallen, or liquid has been spilled into the product; or ‰ The product has been exposed to rain or moisture; or ‰ The product does not appear to operate normally or exhibits a marked change of ‰ performance; or ‰ The product has been dropped, or the cabinet damaged. RF EXPOSURE ATTENTION! To satisfy FCC/IC RF exposure requirements, a separation distance 25.4cm (10.0”) or more should be maintained between the antenna of this device and persons. To ensure compliance, operations at closer than this distance is not allowed. RADIO OPERATOR Futurecom requires the OCR operator to ensure FCC Requirements for Radio Frequency Exposure are met. The OCR output power has to be set such that the maximum Effective Radiated Power (ERP) does not exceed 5W at the antenna. The minimum distance between all possible personnel and the antenna at 5W ERP must be at least 25.4cm (10.0”). FAILURE TO OBSERVE THE MPE DISTANCE EXCLUSION AREA AROUND THE ANTENNA MAY EXPOSE PERSONS WITHIN THIS AREA TO RF ENERGY ABOVE THE FCC EXPOSURE LIMIT FOR BYSTANDERS (GENERAL POPULATION). IT IS THE RESPONSIBILITY OF THE OCR OPERATOR TO ENSURE THAT MPE LIMITS ARE OBSERVED AT ALL TIMES DURING REPEATER TRANSMISSIONS. THE OCR OPERATOR MUST ENSURE AT ALL TIMES THAT NO PERSON COMES WITHIN MPE DISTANCE FROM THE ANTENNA. ATTENTION! To satisfy FCC/IC RF exposure requirements, the OCR site operator must comply with FCC/IC requirements for maximum site EIRP radiated power and antenna height limits. 8A535X03 Rev. Preliminary-00 Page 7 of 17 Use the following MPE Safe Distance calculation for other than 5W ERP antenna power: Calculation Method for RF Safety Distance r: S = PG/4Πr 2 =EIRP/4Πr 2 Where: P: power input to the antenna in mW. EIRP: Equivalent (effective) isotropic radiated power in mW. S: power density mW/cm 2 . G: numeric gain of antenna relative to isotropic radiator. r: distance to centre of radiation in cm. RF EXPOSURE DISTANCE LIMIT: r = (PG/4ΠS) 1/2 = (EIRP/4ΠS) 1/2 For General Population/ Uncontrolled Exposure: S = 0.2 mW/cm 2 for frequency range of 30MHz – 300MHz. S = f/1500 in mW/cm 2 for frequency range of 300MHz – 1500MHz. f is the minimum used frequency in MHz. As an example, let us consider a case of minimum frequency f = 931.0125MHz, ERP RF power P = 5.0W: ERP = 5000 mW = 10 log(5000) dBm = 37.0 dBm S = 931.0125/1500 mW/cm 2 For General Population/bystanders: r = (ERP/4ПS) 1/2 = (5000/4П(931.0125/1500)) 1/2 = 25.32cm. The MPE safe distance is therefore at least 25.4cm (10.0”). ATTENTION! The MOBEXCOM OCR must be restricted to occupational use only to satisfy FCC RF Exposure requirements.

PAGING ON-CHANNEL REPEATER (OCRP) Model No.: OCR 900P FCC ID: LO6-OCR900P Applicant: Futurecom Systems Group Inc 3277 Langstaff Road Concord, Ontario Canada, L4K 5P8 Tested in Accordance With Federal Communications Commission (FCC) 47 CFR, Parts 2 and 22 (Subpart E) UltraTech's File No.: FSG-084F22E This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: April 02, 2008 Report Prepared by: Dharmajit Solanki, RFI Engineer Issued Date: April 02, 2008 Tested by: Mr. Hung Trinh & Mr. Wayne, RFI/EMC Technicians Test Dates: Mar. 06 – April 01, 2008 ƒ The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected. ƒ This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] Korea MIC-RRL 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R 2005-82 & 83 FCC Parts 2 and 22 (Subpart E),PAGING AND RADIOTELEPHONE SERVICE Page 1 PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P ULTRATECH GROUP OF LABS File #: FSG-084F22E 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 January 03, 2008 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION ......................................................................................................................................... 3 1.1. SCOPE......................................................................................................................................................................... 3 1.2. RELATED SUBMITTAL(S)/GRANT(S)................................................................................................................... 3 1.3. NORMATIVE REFERENCES ................................................................................................................................... 3 EXHIBIT 2. PERFORMANCE ASSESSMENT .............................................................................................................. 4 2.1. CLIENT INFORMATION .......................................................................................................................................... 4 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION ............................................................................................. 4 2.3. EUT’S TECHNICAL SPECIFICATIONS ..................................................................................................................5 2.3.1. LIST OF EUT’S PORTS ...................................................................................................................................... 6 2.4. ANCILLARY EQUIPMENT ...................................................................................................................................... 6 2.5. TEST ARRANGEMENT ............................................................................................................................................ 7 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS ............................... 8 3.1. CLIMATE TEST CONDITIONS ................................................................................................................................ 8 3.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TEST SIGNALS .............................................. 8 EXHIBIT 4. SUMMARY OF TEST RESULTS ............................................................................................................... 9 4.1. LOCATION OF TESTS .............................................................................................................................................. 9 4.2. APPLICABILITY & SUMMARY OF EMISSION TEST RESULTS ........................................................................ 9 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES ........................................ 9 4.4. DEVIATION OF STANDARD TEST PROCEDURES.............................................................................................. 9 EXHIBIT 5. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS............................. 10 5.1. TEST PROCEDURES............................................................................................................................................... 10 5.2. MEASUREMENT UNCERTAINTIES .................................................................................................................... 10 5.3. MEASUREMENT EQUIPMENT USED.................................................................................................................. 10 5.4. ESSENTIAL/PRIMARY FUNCTIONS AS DECLARED BY THE MANUFACTURER ....................................... 10 5.5. RF POWER OUTPUT [§§ 2.1046, 90.205 AND 22.535(A)&(F) ................................................................................ 11 5.5.1. Limits ................................................................................................................................................................. 11 5.5.2. Method of Measurements................................................................................................................................... 11 5.5.3. Test Equipment List ........................................................................................................................................... 11 5.5.4. Test Arrangement .............................................................................................................................................. 11 5.5.5. Test Data ...............................................................................................................…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A1 - 1 ANNEX 1 - TEST SETUP PHOTOS Futurecom Systems Group Inc. PAGING ON-CHANNEL REPEATER (OCRP), Model: OCR 900P FCC ID: LO6-OCR900P A1 - 2