LQN2927MICROWAVE SENSOR

ITC Engineering Services Over 20 years experience in Compliance Testing and Engineering Consulting Services ———————————————————————————————————————————————————————— ————————————————ISO 17025, NVLAP and VCCI Accredited Laboratory———————————————— 9959 Calaveras Road, Box 543, Sunol, CA 94586-0543 Phone: (925) 862-2944 • (888) 336-7625 • Fax: (925) 862-9013 E-mail: [email protected] • Web: www.itcemc.com Date: Friday February 2, 2007 Timco Engineering Inc. 849 NW State Road 45 Newberry, Florida 32669 File Number: FCC ID: LNQ2927 Subject: User Manual Statement. To Whom It May Concern, The warning statement submitted with this application is the only document that serves as a manual. Please note that the products with the above FCC ID is custom built for use by the intended manufacturer only. Hence all information regarding design and installation were mutually agreed upon between customer and manufacturer. Should you have any questions or comments regarding the above, please feel free to let me know immediately. Yours sincerely, Femi Ojo Compliance Engineer. ITC Engineering Services.

DIRECTORS: DR. JOE MCBREEN, FRANK CLANCY COMPANY REGISTRATION NO. 92489 User Manual Product Reference: 5.8GHz Microwave Sensor. CEL Part No: - 902927 FCC ID: LQN2927 FCC WARNING STATEMENT Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential/office installation. The equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced Radio/TV technician for help CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Connaught Electronics Ltd. IDA INDUSTRIAL ESTATE, DUNMORE ROAD, TUAM, CO. GALWAY, IRELAND. Telephone: +353 93 25128 Fax: +353 93 25133 [email protected] www.cel-europe.com

Frame 1 of 1 MICROWAVE BLOCK DIAGRAM: TARGET +12 Gnd ST INRS Voltage Regulator Micro – Controller PRF Oscillator/ U8 4MHz RF Oscillator 5.8GHz Transmit Antenna Receive Antenna Target Envelope Detector Range Gate Generator Range Adjust IF FILTER IF AMPS Connaught Electronics Ltd. IDA INDUSTRIAL ESTATE, DUNMORE ROAD, TUAM, CO. GALWAY, IRELAND. Telephone: +353 93 25128 Fax: +353 93 25133 A/C Fax: +353 93 24047 [email protected] www.cel-europe.com FCC ID: -LQN2927

ITC Engineering Services Over 20 years experience in Compliance Testing and Engineering Consulting Services ———————————————————————————————————————————————————————— ————————————————ISO 17025, NVLAP and VCCI Accredited Laboratory———————————————— 9959 Calaveras Road, Box 543, Sunol, CA 94586-0543 Phone: (925) 862-2944 • (888) 336-7625 • Fax: (925) 862-9013 E-mail: [email protected] • Web: www.itcemc.com Date: Friday February 2, 2007 Timco Engineering Inc. 849 NW State Road 45 Newberry, Florida 32669 File Number: FCC ID: LQN2927 Subject: Request for Confidentiality To Whom It May Concern, Pursuant to 47CFR 0.575(d) of the commissions rules and section 552(b)(4) of the Freedom of Information Act (which authorizes the withholding from public inspection; materials which would be privileged as a matter of law, such as trade secrets), we are hereby requesting that the following documents are to be handled with confidentiality and removed from display on the FCC Status Query Form Display of Exhibits: • Schematics (all pages) If there are any questions or if further information is needed, please call me at (925) 862-2944 or fax (925) 862-9013. Thank you. Yours sincerely, Femi Ojo Compliance Engineer ITC Engineering Services Inc.

FCC External and Internal Photographs for 47CFR15, Subpart B for Unintentional Radiators, per Section 101 Equipment authorization of unintentional radiators, and 47CFR15, Subpart C per Section 209 General Limits for Operation of Intentional Radiators on Smart MDD 5.8GHz Sensor [FCC ID: LQN2927] Model and Part Number: 902927(Smart Part No: A4518200110/004) Report No. 20070122-01-Fc15 Judgement Complies as Tested Provided for evaluation by Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tests and Report by ITC Engineering Services, Inc. 9959 Calaveras Road, Box 543 Sunol, California 94586-0543 Tel: (925) 862-2944 Fax: (925) 862-9013 Email: [email protected] Web Site: www.itcemc.com  ISO 17025 Accredited Compliance Laboratory (RES-GmbH) Lab Code: 200172-0 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 2 of 6 Table of Contents PART 1 General........................................................................................................................................ 3 Test Information............................................................................................................................................. 3 PART 2 External Photographs............................................................................................................. 4 List of Figures Figure 1: EUT Top View...............................................................................................................................4 Figure 2: EUT Front View............................................................................................................................ 4 Figure 3: EUT Rear View............................................................................................................................. 5 Figure 4: EUT Internal View 1..................................................................................................................... 5 Figure 5: EUT Internal View 2...................................................................................................................... 6 Figure 6: EUT Internal View 3...................................................................................................................... 6 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 3 of 6 PART 1 General Test Information Product: Model Number: Smart MDD 5.8GHz Sensor 902927 Manufacturer’s Name Manufacturer’s Address Contact Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tel: + 011 353 (93) 25128 Mr. Patrick Denny Fax : +011 353 (93) 25133 Email [email protected] Test Laboratory ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, CA 94586-0543 Email: [email protected] Web Site: http://www.itcemc.com Tel: +1(925) 862-2944 Fax: +1(925) 862-9013 Test Number Report Number 20050616-03 20070122-01-Fc15 Test Date(s) & Issue Date Jan 8 – Jan 10, 2007 Jan 29, 2007 Test Engineer(s) Femi Ojo Documentation Femi Ojo Test Results ; Complies as Tested ‰ Fail Total Number of Pages 6 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 4 of 6 PART 2 External Photographs. Figure 1: EUT Top View Figure 2: EUT Front View Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 5 of 6 Figure 3: EUT Rear View Figure 4: EUT Internal View 1

FCC External and Internal Photographs for 47CFR15, Subpart B for Unintentional Radiators, per Section 101 Equipment authorization of unintentional radiators, and 47CFR15, Subpart C per Section 209 General Limits for Operation of Intentional Radiators on Smart MDD 5.8GHz Sensor [FCC ID: LQN2927] Model and Part Number: 902927(Smart Part No: A4518200110/004) Report No. 20070122-01-Fc15 Judgement Complies as Tested Provided for evaluation by Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tests and Report by ITC Engineering Services, Inc. 9959 Calaveras Road, Box 543 Sunol, California 94586-0543 Tel: (925) 862-2944 Fax: (925) 862-9013 Email: [email protected] Web Site: www.itcemc.com  ISO 17025 Accredited Compliance Laboratory (RES-GmbH) Lab Code: 200172-0 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 2 of 6 Table of Contents PART 1 General........................................................................................................................................ 3 Test Information............................................................................................................................................. 3 PART 2 External Photographs............................................................................................................. 4 List of Figures Figure 1: EUT Top View...............................................................................................................................4 Figure 2: EUT Front View............................................................................................................................ 4 Figure 3: EUT Rear View............................................................................................................................. 5 Figure 4: EUT Internal View 1..................................................................................................................... 5 Figure 5: EUT Internal View 2...................................................................................................................... 6 Figure 6: EUT Internal View 3...................................................................................................................... 6 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 3 of 6 PART 1 General Test Information Product: Model Number: Smart MDD 5.8GHz Sensor 902927 Manufacturer’s Name Manufacturer’s Address Contact Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tel: + 011 353 (93) 25128 Mr. Patrick Denny Fax : +011 353 (93) 25133 Email [email protected] Test Laboratory ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, CA 94586-0543 Email: [email protected] Web Site: http://www.itcemc.com Tel: +1(925) 862-2944 Fax: +1(925) 862-9013 Test Number Report Number 20050616-03 20070122-01-Fc15 Test Date(s) & Issue Date Jan 8 – Jan 10, 2007 Jan 29, 2007 Test Engineer(s) Femi Ojo Documentation Femi Ojo Test Results ; Complies as Tested ‰ Fail Total Number of Pages 6 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 5 of 6 Figure 3: EUT Rear View Figure 4: EUT Internal View 1 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 6 of 6 Figure 5: EUT Internal View 2 Figure 6: EUT Internal View 3

FCC Test Report for 47CFR15, Subpart B for Unintentional Radiators, per Section 101 Equipment authorization of unintentional radiators, and 47CFR15, Subpart C per Section 209 General Limits for Operation of Intentional Radiators on Smart MDD 5.8GHz Sensor [FCC ID: LQN2927] Model and Part Number: 902927(Smart Part No: A4518200110/004) Report No. 20070122-01-FC15 Judgement Complies as Tested Provided for evaluation by Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tests and Report by ITC Engineering Services, Inc. 9959 Calaveras Road, Box 543 Sunol, California 94586-0543 Tel: (925) 862-2944 Fax: (925) 862-9013 Email: [email protected] Web Site: www.itcemc.com  ISO 17025 Accredited Compliance Laboratory (RES-GmbH) Lab Code: 200172-0 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 2 of 31 Table of Contents PART 1 General........................................................................................................................................ 6 Test Information............................................................................................................................................. 6 Tests Performed: .......................................................................................................................................... 6 Declaration/Disclaimer .................................................................................................................................. 7 Test Methodology .......................................................................................................................................... 8 Test Facility ................................................................................................................................................... 8 PART 2 RECEIVER MEASUREMENTS............................................................................................... 9 OPEN FIELD RADIATED EMISSIONS ..................................................................................................... 9 Test Specification: 47 CFR PART 15, Sub-Part B ................................................................................9 EUT Description. ................................................................................................................................. 9 Test Procedure – Radiated Emissions Tests................................................................................ 9 Spectrum Analyzer Configuration (during swept frequency scans) – Radiated Emissions ........................ 10 OPEN FIELD RADIATED EMISSIONS Results ...................................................................................... 11 Site Used – Radiated Emissions Measurement.......................................................................... 11 Administrative and Environmental Conditions – Radiated Emissions Measurement............ 11 Remark............................................................................................................................................... 11 Open Field Radiated Emissions Test Setup Photographs ............................................................................ 12 Administrative and Environmental Details– Radiated Emissions Measurement................... 13 Remark............................................................................................................................................... 13 Radiated Emissions Test Setup Photographs ............................................................................................... 14 PART 3 RF MEASUREMENTS............................................................................................................ 15 Test Specification: 47 CFR PART 15, Sub-Part C .............................................................................. 15 General Test Procedure – RF Tests............................................................................................. 15 Spectrum Analyzer Configuration (during swept frequency scans) – Radiated Emissions ........................ 16 FIELD STRENGTH OF FUNDAMENTAL............................................................................................... 17 FIELD STRENGTH Measurement.............................................................................................................. 17 Site Used – Field Strength of Fundamental Measurements..................................................... 17 Administrative Details and Environmental Conditions – Field Strength of Fundamental Measurements.................................................................................................................................. 17 Test Data – Field Strength of Fundamental ................................................................................................. 17 Remark............................................................................................................................................... 18 OCCUPIED BANDWIDTH measurement.................................................................................................. 19 Site Used – Occupied Bandwidth Measurements...................................................................... 19 Administrative Details – Occupied Bandwidth Measurements................................................. 19 Test Measurement: Occupied Bandwidth Measurements (Performed in a Semi-Anechoic Chamber) 19 Occupied Bandwidth Measurement Plot ..................................................................................................... 20 Spectrum Mask Measurement....................................................................................................…

Text truncated - open the document above for the full version.

Report: RF Duty Cycle of CEL Microwave Sensor Prepared For: ITC Prepared by: CEL Date: 07/07/05 Connaught Electronics Ltd. IDA INDUSTRIAL ESTATE, DUNMORE ROAD, TUAM, CO. GALWAY, IRELAND. Telephone: +353 93 25128 Fax: +353 93 25133 1 Scope This document details the RF duty cycle of CEL’s pulsed microwave sensor. 2 Duty Cycle Determination In order to determine the RF duty cycle, the PRF frequency and the oscillator on-time of the microwave sensor are measured and using these the duty cycle is calculated. 2.1 PRF Oscillator Period The pulsed microwave oscillator is turned on/off by the PRF (Pulse Repetition Frequency) oscillator. The pulse repetition frequency is 1.5MHz. (see fig.1 below). PRF = 1.5MHz Oscillator period = 682ns fig.1 2.2 RF pulse width determination: The range of the SDR is 85cm. Thus using the mathematical formula for RF waves the pulse width can be determined: Pulse width = (Range*2)/(3x10 8 ) In the case of CEL’s SDR sensor: Pulse width = 1.7/(3x10 8 ) = 5.66ns 2.3 Duty Cycle Calculation Duty Cycle (%) = RF Pulse Duration/PRF Oscillation Period = (5.66ns/682ns) * 100 = 0.83 %

FCC Test Report for 47CFR15, Subpart B for Unintentional Radiators, per Section 101 Equipment authorization of unintentional radiators, and 47CFR15, Subpart C per Section 209 General Limits for Operation of Intentional Radiators on Smart MDD 5.8GHz Sensor [FCC ID: LQN2927] Model and Part Number: 902927(Smart Part No: A4518200110/004) Report No. 20070122-01-FC15 Judgement Complies as Tested Provided for evaluation by Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tests and Report by ITC Engineering Services, Inc. 9959 Calaveras Road, Box 543 Sunol, California 94586-0543 Tel: (925) 862-2944 Fax: (925) 862-9013 Email: [email protected] Web Site: www.itcemc.com  ISO 17025 Accredited Compliance Laboratory (RES-GmbH) Lab Code: 200172-0 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 2 of 31 Table of Contents PART 1 General........................................................................................................................................ 6 Test Information............................................................................................................................................. 6 Tests Performed: .......................................................................................................................................... 6 Declaration/Disclaimer .................................................................................................................................. 7 Test Methodology .......................................................................................................................................... 8 Test Facility ................................................................................................................................................... 8 PART 2 RECEIVER MEASUREMENTS............................................................................................... 9 OPEN FIELD RADIATED EMISSIONS ..................................................................................................... 9 Test Specification: 47 CFR PART 15, Sub-Part B ................................................................................9 EUT Description. ................................................................................................................................. 9 Test Procedure – Radiated Emissions Tests................................................................................ 9 Spectrum Analyzer Configuration (during swept frequency scans) – Radiated Emissions ........................ 10 OPEN FIELD RADIATED EMISSIONS Results ...................................................................................... 11 Site Used – Radiated Emissions Measurement.......................................................................... 11 Administrative and Environmental Conditions – Radiated Emissions Measurement............ 11 Remark............................................................................................................................................... 11 Open Field Radiated Emissions Test Setup Photographs ............................................................................ 12 Administrative and Environmental Details– Radiated Emissions Measurement................... 13 Remark............................................................................................................................................... 13 Radiated Emissions Test Setup Photographs ............................................................................................... 14 PART 3 RF MEASUREMENTS............................................................................................................ 15 Test Specification: 47 CFR PART 15, Sub-Part C .............................................................................. 15 General Test Procedure – RF Tests............................................................................................. 15 Spectrum Analyzer Configuration (during swept frequency scans) – Radiated Emissions ........................ 16 FIELD STRENGTH OF FUNDAMENTAL............................................................................................... 17 FIELD STRENGTH Measurement.............................................................................................................. 17 Site Used – Field Strength of Fundamental Measurements..................................................... 17 Administrative Details and Environmental Conditions – Field Strength of Fundamental Measurements.................................................................................................................................. 17 Test Data – Field Strength of Fundamental ................................................................................................. 17 Remark............................................................................................................................................... 18 OCCUPIED BANDWIDTH measurement.................................................................................................. 19 Site Used – Occupied Bandwidth Measurements...................................................................... 19 Administrative Details – Occupied Bandwidth Measurements................................................. 19 Test Measurement: Occupied Bandwidth Measurements (Performed in a Semi-Anechoic Chamber) 19 Occupied Bandwidth Measurement Plot ..................................................................................................... 20 Spectrum Mask Measurement....................................................................................................…

Text truncated - open the document above for the full version.

FCC Test Setup Photographs for 47CFR15, Subpart B for Unintentional Radiators, per Section 101 Equipment authorization of unintentional radiators, and 47CFR15, Subpart C per Section 209 General Limits for Operation of Intentional Radiators on Smart MDD 5.8GHz Sensor [FCC ID: LQN2927] Model and Part Number: 902927(Smart Part No: A4518200110/004) Report No. 20070122-01-Fc15 Judgement Complies as Tested Provided for evaluation by Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tests and Report by ITC Engineering Services, Inc. 9959 Calaveras Road, Box 543 Sunol, California 94586-0543 Tel: (925) 862-2944 Fax: (925) 862-9013 Email: [email protected] Web Site: www.itcemc.com  ISO 17025 Accredited Compliance Laboratory (RES-GmbH) Lab Code: 200172-0 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 2 of 7 Table of Contents PART 1 General........................................................................................................................................ 3 Test Information............................................................................................................................................. 3 PART 2 Test Setup Photographs........................................................................................................ 4 Radiated Emissions, Spurious and Harmonics Test Setup Photographs ....................................................... 4 List of Figures Figure 1: Open Field Radiated Emissions below 1 GHz (View 1)......................................................... 4 Figure 2: Open Field Radiated Emissions below 1 GHz (View 2)......................................................... 4 Figure 3: Radiated Emissions above 1 GHz (View 1)............................................................................. 5 Figure 4: Radiated Emissions above 1 GHz (View 2)............................................................................. 5 Figure 8: Spurious emissions below 1 GHz (View 1).............................................................................. 6 Figure 9: Spurious emissions below 1GHz (View 2)............................................................................... 6 Figure 10: Spurious emission above 1 GHz (View 1)............................................................................. 7 Figure 11: Spurious emission above 1 GHz (View 2)............................................................................. 7 Applicant: Connaught Electronics Ltd. Report No.: 20070122-01-FC15 Prepared By: ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, California 94586-0543 Tel: [925] 862-2944 Fax: [925] 862-9013 Email: [email protected] Web: www.itcemc.com Product: Smart MDD 5.8GHz Sensor Model Number:902927 FCC ID:LQN2927 Page 3 of 7 PART 1 General Test Information Product: Model Number: Smart MDD 5.8GHz Sensor 902927 Manufacturer’s Name Manufacturer’s Address Contact Connaught Electronics, LTD IDA Industrial Estate Dunmore Road, Tuam Co. Galway, Ireland Tel: + 011 353 (93) 25128 Mr. Patrick Denny Fax : +011 353 (93) 25133 Email [email protected] Test Laboratory ITC Engineering Services, Inc. 9959 Calaveras Road, PO Box 543 Sunol, CA 94586-0543 Email: [email protected] Web Site: http://www.itcemc.com Tel: +1(925) 862-2944 Fax: +1(925) 862-9013 Test Number Report Number 20050616-03 20070122-01-Fc15 Test Date(s) & Issue Date Jan 8 – Jan 10,…

Text truncated - open the document above for the full version.