LW3-QKQuik-Kee

Quik-Kee TM Stand Alone Programmable Receiver Owners Manual Quik-Kee Owners Manual 2 Legal Notice The information contained in this document is subject to change without notice. The contents of this document are provided “as is.” Active Control Technology makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose in relation to the accuracy, reliability or contents of this document. Active Control Technology shall not be liable for errors contained herein or for any loss of data or income, or any special, incidental, punitive, consequential or indirect damages howsoever caused in connection with the furnishing, performance, or use of this material. This document contains proprietary information which is protected by copyright. The associated software is the property of Active Control Technology, and all rights are reserved. No part of this document shall be reproduced, in whole or in part. The information contained herein has been prepared by Active Control Technology solely for use by Active Control Technology employees, agents, and customers. Trademark Information Copyright 2003 - 2010. Active Control Technology. All rights reserved. . 1800 Appleby Line, Suite 4 Burlington, ON L7L 6A1 www.activecontrol.com (905) 670-5500 Revision No.: 1.0 Publication Date: April 2010 Quik-Kee Owners Manual 1 Overview The Quik-Kee TM battery-operated transmitters are wireless radio controls designed to be used with Quik-Kee receivers. The Quik-Kee transmitters use a very high level of security encryption to ensure the users’ identification code cannot be copied to gain unauthorized access to restricted areas. No coding switches are on the device. All programming credentials are factory set to ensure no duplication of identification codes. Quik-Kee transmitters have the following features:  Incremental Packet Transmission ™ – Innovative 96 bit encryption to ensure the highest level of security for the transmission of codes. Each sequential transmission of code is different to prevent code grabber devices from operating.  SMT and PLL Technology – Phase Lock Loop crystals with SMT devices used in the design prevent problems with detuning and poor range performance.  Visual LED indicator – A red LED light provides visual confirmation the device is transmitting. Operating Instructions 1. Press the button on the key tag transmitter for at least one second to transmit the signal code. A red indicator light will flash for the duration of the transmission. Pressing and holding the button down only transmits one pulse. This reduces unintentional transmissions and conserves battery life. 2. Release and press the button for one second again to send another transmission. 3. If the light on the transmitter does not light up when you press and hold any button, replace the battery. Button 1 Button 2 Button 3 Button 4 Quik-Kee Owners Manual 2 Batteries A 3-volt lithium battery CR2032 powers the transmitters. The batteries should last up to 3 years with normal use. To conserve battery life, an internal timer limits the transmission duration to a few seconds if the button is pressed for a long period of time. Simply release the button and press again to transmit. Replacing the Batteries 1. Carefully pry open the case with a flat edge tool or screwdriver from the key ring corner. 2. Make sure the case is laid flat on the table upside down. 3. Push out the coin shaped battery out of its holder and replace it with a similar battery being careful to place the “+” positive side on top. 4. DO NOT install the batteries backwards. The device will be damaged. 5. Snap close the case. 6. Test the transmitter and look for the red light to flash when a button is pressed. Important: Radio frequency controls provide reliable and convenient means to remotely control devices. However, there are some limitations. A receiver can only respond to one transmission signal at a time and may be blocked by radio signals operating on the same center frequency. Warning: Changes or modifications not expressly approved by Active Control Technology Inc. could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

May 4, 2010 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Application for Equipment Certification under FCC Part 15, Subpart C, Section 15.231 Periodic Operation at 433.92 MHz Applicant: Active Control Technology Inc Product: Quik-Kee Transmitter Model No.: QK-1, QK-1P, QK-2, QK-2P, QK-4 and QK-4P FCC ID: LW3-QK Dear Sir/Madam: As appointed agent for Active Control Technology Inc, we submit this application for equipment certification of the above product. Please review all required documents uploaded to your E-Filing Site. If you have any queries, please do not hesitate to contact us. Yours truly, Dan Huynh Dan Huynh Authorized Agent UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

Quik-Kee Transmitter Model No.: QK-1, QK-1P, QK-2, QK-2P, QK-4 and QK-4P FCC ID: LW3-QK Applicant: Active Control Technology Inc 1800 Appleby Line, Suite 4 Burlington, Ontario Canada L7L 6A1 In Accordance With Federal Communications Commission (FCC) Part 15, Subpart C, Section 15.231 Periodic Operation UltraTech's File No.: ACCT-052F15C231 This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: May 4, 2010 Report Prepared by: Dan Huynh Issued Date: May 4, 2010 Tested by: Wayne Wu, EMC/RFI Technician Test Dates: April 15 & 27, 2010  The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected.  This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] Korea KCC-RRL 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R CA2049 FCC Part 15, Subpart C, Section 15.231 Quik-Kee Transmitter, Model No.: QK-1, QK-1P, QK-2, QK-2P, QK-4 and QK-4P FCC ID: LW3-QK ULTRATECH GROUP OF LABS File #: ACCT-052F15C231 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 May 4, 2010 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected], Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION.............................................................................................................................................. 1 1.1. SCOPE ........................................................................................................................................................................ 1 1.2. RELATED SUBMITTAL(S)/GRANT(S)......................................................................................................................... 1 1.3. NORMATIVE REFERENCES ...................................................................................................................................... 1 EXHIBIT 2. PERFORMANCE ASSESSMENT.................................................................................................................... 2 2.1. CLIENT INFORMATION .............................................................................................................................................. 2 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION .................................................................................................... 2 2.3. EUT’S TECHNICAL SPECIFICATIONS ....................................................................................................................... 3 2.4. LIST OF EUT’S PORTS ............................................................................................................................................... 3 2.5. ANCILLARY EQUIPMENT ........................................................................................................................................... 3 2.6. TEST SETUP BLOCK DIAGRAM................................................................................................................................. 3 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS............................................... 4 3.1. CLIMATE TEST CONDITIONS .................................................................................................................................... 4 3.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TESTS ...................................................................... 4 EXHIBIT 4. SUMMARY OF TEST RESULTS ..................................................................................................................... 5 4.1. LOCATION OF TESTS................................................................................................................................................. 5 4.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS......................................................................... 5 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES ................................................. 5 EXHIBIT 5. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS ............................................... 6 5.1. TEST PROCEDURES.................................................................................................................................................. 6 5.2. MEASUREMENT UNCERTAINTIES............................................................................................................................ 6 5.3. MEASUREMENT EQUIPMENT USED ........................................................................................................................ 6 5.4. ANTENNA REQUIREMENTS [47 CFR § 15.203]......................................................................................................... 6 5.5. PROVISIONS FOR PERIODIC TRANSMITTERS [47 CFR 15.231(A)] ......................................................................... 7 5.6. TRANSMITTER RADIATED EMISSIONS [47 CFR §§ 15.231(B), 15.209 & 15.205]..................................................... 8 5.7. 20 DB BANDWIDTH [47 CFR 15.231(C)] .................................................................................................................... 15 EXHIBIT 6. TEST EQUIPMENT LIST ............................................................................................................................... 17 EXHIBIT 7. MEASUREMENT UNCERTAINTY................................................................................................................. 18 7.1. LINE CONDUCTED EMISSION MEASUREMENT UNCERTAINTY ........................…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOGRAPHS Active Control Technology Inc . Quik-Kee Transmitter, Model QK-4P FCC ID: LW3-QK A1 - 1 Radiated Emissions at 3m Distance Orthogonal Position 1 ANNEX 1 - TEST SETUP PHOTOGRAPHS Active Control Technology Inc . Quik-Kee Transmitter, Model QK-4P FCC ID: LW3-QK A1 - 2 Radiated Emissions at 3m Distance Orthogonal Position 2 ANNEX 1 - TEST SETUP PHOTOGRAPHS Active Control Technology Inc . Quik-Kee Transmitter, Model QK-4P FCC ID: LW3-QK A1 - 3 Radiated Emissions at 3m Distance Orthogonal Position 3