LWN9312F24Industrial Radio Remote Controller

        

F24 Series Operating Instructions








TELECRANE ® Lee’s Hi-Tech Ent. Co., Ltd. 1 Table of Contents
Warranty & Precautions of Operation..........................2
F24 Operation......................................................3
Appendix I: Definition of Function Terminology............4 ! 2 Warranty Lee’s Hi-Tech Enterprises Co., Ltd. guarantees that this product meets its published specifications at the time of shipment from the factory. Under proper installation it should work as expected. Warranty Period This equipment is warranted against defects in material and manufacturing for a period of one year from the date of shipment. During the warranty period, TELECRANE is responsible for necessary repairs as long as the product can be proved to be defective. For warranty service or repair this product must be returned to a service facility designated by TELECRANE. Buyer will pay shipping charges to TELECRANE while TELECRANE will pay return shipping charges. Excluded Items This warranty does not include consumptive parts such as batteries, fuses, buttons, relays. Also this warranty does not cover defects caused by improper installation, improper or insufficient maintenance, unauthorized modification, improper operation, ignorance of environmental specifications, or improper software or interfacing. Remarks No other warranty is expressed or implied, except for the above mentioned.Ϩ The remedies provided herein are the buyer’s sole and exclusive remedies. TELECRANE shall not be liable for any direct, Ϩ indirect, special, incidental or consequential damages. Attention ϨʳNever dismantle the equipment by any unauthorized personnel, or equipment may be damaged. ϨʳAfter finishing operation of TELECRANE radio controller shut off main power to the crane, power to receiver, and remove transmitter key. If transmitter’s power is controlled by “rotary key switch”, then need turn the key to “OFF” position and remove it. ϨʳThe crane should be equipped with main power relay, limit switch and other safety devices. Precautions ( I ) To avoid any interference, the receiver must be placed as far as possible from frequency inverter and power cable as possible. Precaution ( II ) The receiver should be installed on the top of the electrical control box. Do not mount the receiver inside the electrical control box. ! !! ! Emergency In case of Emergency, please follow the procedure below and contact the distributor for service immediately. 1. Press EMS button of transmitter. 2. Remove the key from transmitter. 3. Switch off the main power of crane. 4. Contact distributor nearest you immediately. F24 Warranty & Precautions of Operation 3 How to start! 1. Insert 2 AA-size alkaline batteries into battery compartment. 2. Insert rotary key and switch to ON position. 3. Follow the Power-On procedure to energize the main relay inside receiver. 4. Operate normally according to the function settings have been done. 5. After operation, please proceed as following: (1) Press EMS pushbutton /mushroom, (2) remove the key and keep it in safe place, (3) Switch off the equipment’s main power (e.g. Crane) Transmitter Batteries Transmitter requires 2 AA size alkaline batteries. DO NOT use rechargeable batteries. During operation, the LED flash green when battery power is full and flash red when battery power is low. The transmitter will be remain off until the new batteries is being replaced in order to turn on again. NC/NO output connection R0~R4 relays are designed for both type of NO and NC/NO relays. Both output connection of NC/NO relay are available on relay module. To change NO relay into NC/NO relay, remove standard NO relay and replace with a NC/NO relay. And follow the indication on relay module for connection of output wire. Extra COM of down relays Additional COM is available for DOWN relays. The red wire (Jump 1) is backup COM connection for down relays. If additional COM connection is required for the down relays, cut off red wire and connect new COM source for down relays. Transmitter LED malfunction alert (A) Red LED lamp flashing quickly (every 0.2 sec) when any pushbutton is being pressed. Causes: (1) One of the pushbuttons is jammed. (2) The EMS mushroom is not released completely. (3) The transmitter is not properly Power-On according to the instructions. Note: Please contact the distributor nearest you for further assistant if need. (B) TX LED flashes slowly (every 0.5 sec intermittent). Cause: The transmitter memory is damaged. Contact the distributor for service. Troubleshooting (A) Symptom: TX LED remains ON with red light. Solution: Please remove the batteries and insert again. (B) Symptom: The RX does not respond at all. Solution: Switch off main power and switch on again after 20 seconds. ! !! ! ! !! ! Ɋ ɊɊ Ɋ! !! ! Dibohft!ps!npejgjdbujpot!opu!fyqsfttmz!bqqspwfe!cz!uif!qbsuz!sftqpotjcmf!gps!dpnqmjbodf!dpvme! Dibohft!ps!npejgjdbujpot!opu!fyqsfttmz!bqqspwfe!cz!uif!qbsuz!sftqpotjcmf!gps!dpnqmjbodf!dpvme!Dibohft!ps!npejgjdbujpot!opu!fyqsfttmz!bqqspwfe!cz!uif!qbsuz!sftqpotjcmf!gps!dpnqmjbodf!dpvme! Dibohft!ps!npejgjdbujpot!opu!fyqsfttmz!bqqspwfe!cz!uif!qbsuz!sftqpotjcmf!gps!dpnqmjbodf!dpvme! wpje!uif!vtfs(t!bvuipsjuz!up!pqfsbuf!uif!frvjqnfou wpje!uif!vtfs(t!bvuipsjuz!up!pqfsbuf!uif!frvjqnfouwpje!uif!vtfs(t!bvuipsjuz!up!pqfsbuf!uif!frvjqnfou wpje!uif!vtfs(t!bvuipsjuz!up!pqfsbuf!uif!frvjqnfou! !! ! Ɋ ɊɊ Ɋ! !! ! JD!Opuf; JD!Opuf;JD!Opuf; JD!Opuf;“Uijt!efwjdf!ibt!cffo!eftjho Uijt!efwjdf!ibt!cffo!eftjhoUijt!efwjdf!ibt!cffo!eftjho Uijt!efwjdf!ibt!cffo!eftjhofe!up!pqfsbuf!xjui!bo!boufoob!!ibwjoh!!b!!nbyjnvn!!!hbjo!pg!! fe!up!pqfsbuf!xjui!bo!boufoob!!ibwjoh!!b!!nbyjnvn!!!hbjo!pg!!fe!up!pqfsbuf!xjui!bo!boufoob!!ibwjoh!!b!!nbyjnvn!!!hbjo!pg!! fe!up!pqfsbuf!xjui!bo!boufoob!!ibwjoh!!b!!nbyjnvn!!!hbjo!pg!! 2/6!eCj/!Boufoob!ibwf!b!ijhifs!hbjo!jt!tusjdumz!qspijcjufe!qfs!sfrvmbujpot!pg!Joevtusz! 2/6!eCj/!Boufoob!ibwf!b!ijhifs!hbjo!jt!tusjdumz!qspijcjufe!qfs!sfrv…

Text truncated - open the document above for the full version.

LEE’ S HI-TECH ENTERPRISE CO., LTD 8F-1, NO.288-2, Hsin-Ya Rd, Chien-Chen Zone(806), Kaohsiung, Taiwan, R.O.C. Confidentiality Request FCC ID : LWN9312F24 Product : Industrial Radio Remote Controller Model : F24 Data Applies To: F24-10D ; F24-10S ; F24-8D ; F24-8S ; F24-6D ; F24-6S Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours,

LEE’ S HI-TECH ENTERPRISE CO., LTD 8F-1, NO.288-2, Hsin-Ya Rd, Chien-Chen Zone(806), Kaohsiung, Taiwan, R.O.C. *********************************************************************************** Authorization Agency Letter Product : Industrial Radio Remote Controller Model : F24 Data Applies To: F24-10D ; F24-10S ; F24-8D ; F24-8S ; F24-6D ; F24-6S To Whom It May Concern: Please be advised that LEE’ S HI-TECH ENTERPRISE CO., LTD authorizes Ecom Sertech Corp. to act on our behalf on the produce certificate applications submitted, (For example:FCC certificate,IC certificate,CE application,& notification) until otherwise notified, for all relation certificated institute. Thank you for your attention to this matter. Sincerely, Signature: (Name / Date)

Helen Zhao Subject: FW: FW: LEE'S HI-TECH ENTERPRISE CO.,LTD, FCC ID: LWN9312F24,Assessment NO.: AN05T4463, Notice#2- -Updated(0128) 1/28/2005 From: [email protected] [mailto:[email protected]] Sent: Thursday, January 27, 2005 11:05 PM To: Helen Zhao Cc: [email protected]; Mike Kuo Subject: ??: FW: LEE'S HI-TECH ENTERPRISE CO.,LTD, FCC ID: LWN9312F24,Assessment NO.: AN05T4463, Notice#2--Updated (0128) Dear Helen: Sorry for my late reply as just finished the discussing with our client. Please find the belowing reply~ Best Regards, Daphne Liang / ??? 1/28/2005 Certification Team Leader/ R&D and Certification Dept. -----Original Message----- From: Compliance Certification Services [mailto:[email protected]] Sent: Thursday, January 20, 2005 1:44 PM To: Helen Zhao Subject: LEE'S HI-TECH ENTERPRISE CO.,LTD, FCC ID: LWN9312F24, Assessment NO.: AN05T4463, Notice#2 Question #1: The test report indicated that there are model series in the filing. The model difference table shows some are using double speed pushbotton: 3003.0451, some are using single speed pushbotton: B3w-4050. But the test report does not show that both types of button have been investigated. Ans: Please find the attached for updated:F24_Report(FRF)0128_TX. Question #2: What did "2 patterns" of duty cycle in the report refer to? Please explain. If two patterns were find in a complete period, please provide new duty-cycle plots to show the complete period, the period of pattern #1 and number of pattern #1, the period of pattern #2 and number of pattern #2, respectively. Please do duty cycle factor calculation. Ans: Please find the attached for updated:F24_Report(FRF)0128_TX. Question #3: Based upon FCC15.35(a), "For pulse modulated devices with a pulse-repetition frequency of 20 Hz or less and for which CISPR quasi-peak measurements are specified, compliance with the regulations shall be demonstrated using measuring equipment employing a peak detector function, properly adjusted for such factors as pulse desensitization, using the same measurement bandwidths that are indicated for CISPR quasi-peak measurements." However, the test report indicated that the average values were obtained using measuring equipment employing an average detector function. Please re-submit the average values from peak values and duty-cycle factor (from question #2). Ans: Please find the attached for updated:F24_Report(FRF)0128_TX. Question #4: Based upon FCC15.231(b)(2), the limits on the field strength of emission, as shown in the above table, based on the average value of the measured emissions. Please correct section 3.6 accordingly. Ans: Please find the attached for updated:F24_Report(FRF)0128_TX. Question #5: Please correct error on page 28 (center frequency in the tables) of the test report. Ans: Please find the attached for updated:F24_Report(FRF)0128_TX. Question #6: The model difference table in the test report does not indicate clearly Transmitter key and Numbers & Spec. of F24-10D, it said "same". If it is the same as F24, then it should use 10 double-speed push-buttons and one START key, but the schematics of F24-10D indicated otherwise, there are totally 11 double-speed push-buttons and one START key. Please explain. Ans: After checked with our client,please see my following explain: This transmitter key and numbers & Spec. of F24-10 is same as F24;when you saw the schematice of F24-10D indicated the otherwise,I think that one is "F1".After checked,This is an useless function key! So there are no any problems with that. Question #7: FCC ID label format shows a much wider label than the device. Please revise. Ans: Please find the attached for updated:F24_Label Location(TX)0128. Question #8: The first page of External photos exhibit shows a second device other than the EUT. Please explain what that is. Please remove it from the External Photos exhibit. Ans: Please find the attached for updated:F24_Ext Photo(FCC)0128_TX. Question #9: The antenna specification shows the frequency range is from 428.5-438.5MHz. Please modify form 731 and test report to show the consistent operating frequency range. Ans: Please find the attached for updated frequecny reange(428.5-438.5MHz):F24_Report(FRF) 0128_TX. Best Regards, Helen Zhao The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. 1/28/2005

! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page1 of 38 ! !! External Photo(TX) ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page2 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page3 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page4 of 38 ! !!

Company: LEE’ S HI-TECH ENTERPRISE CO., LTD Model: F24 Product : Industrial Radio Remote Controller LEE’ S HI-TECH ENTERPRISE CO., LTD Model No: F24 FCC ID：LWN9312F24 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference and [2] this device must accept any interference received, including interference that may cause undesired operation. S/N： Made in Taiwan Label Here

! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 9 of 38 ! !! Internal Photo(TX) ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 10 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 11 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 12 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 13 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 14 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 15 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 16 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 17 of 38 ! !! ! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 18 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 19 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 20 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 21 of 38 ! !! ! Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720! Report No.ΚER04-12-049F/FRF Page 22 of 38 ! !!

TYPE: HELIX FREQUENCY: 428.5~438.5MHZ GAIN(dBi) Љ1.5 V.S.W.R. Љ1.2 POLARIZATION Elliptical Polarization Power Capability Љ1W Radiation Element Material Stainless Dimension(mm) ӥ13Ѽˈˈʳ ̃̀̃˸˷˴́˶˸ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳˈ˃Өʳ ˪˸˼˺˻̇ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˄˃˺ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ 45mm

Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 1 of 32 TEST REPORT Product Name ： Industrial Radio Remote Controller Model Number ： F24 Data Applies to ： F24-10D ; F24-10S ; F24-8D ; F24-8S ; F24-6D ; F24-6S Brand Name ： TELECRANE FCC ID ： LWN9312F24 Applicant ： LEE’ S HI-TECH ENTERPRISE CO., LTD Address ： 8F-1, NO.288-2, Hsin-Ya Rd, Chien-Chen Zone(806), Kaohsiung, Taiwan, R.O.C. Received Date ： December 20, 2004 Tested Date ： December 20 ~ 27, 2004 Notes ： 1. This report will be invalid if duplicated or photocopied in part. 2. This report refers only to the specimen(s) submitted to testing, and be invalid as separately used. 3. This report is invalid without examination stamp and signature of this institute. 4. The tested specimen(s) will be preserved for thirty days from the data issued. 5. The report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 2 of 32 Test Report Certification Product Name ： Industrial Radio Remote Controller Model Number ： F24 Data Applies to ： F24-10D ; F24-10S ; F24-8D ; F24-8S ; F24-6D ; F24-6S Brand Name ： TELECRANE FCC ID ： LWN9312F24 Applicant ： LEE’ S HI-TECH ENTERPRISE CO., LTD Measurement Standard : 47 CFR Part 15 Subpart B and C(Section 15.231) ANSI C63.4-2003 WE HEREBY CERTIFY THAT: The measurements shown in the attachment were made in accordance with the procedures indicated, and the energy emitted by the equipment was found to be within the limits applicable. We assume full responsibility for the accuracy and completeness of these measurements and vouch for the qualifications of all persons taking them. Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 3 of 32 TABLE OF CONTENTS TITLE PAGE NO. 1. GENERAL INFORMATION ................................................................................................ 4 1.1 General Statement ........................................................................................................................... 4 1.2 General Description of EUT & Power ............................................................................................ 4 1.3 EUT & Peripherals Setup Diagram................................................................................................. 5 1.4 EUT Operating Condition ............................................................................................................... 5 1.5 Description of Test Site................................................................................................................... 5 1.6 Summary of Test Results ................................................................................................................ 6 2. TANSMITTER AUTO-OFF AND DUTY CYCLE ............................................................. 7 2.1 Test Equipments.............................................................................................................................. 7 2.2 Test Setup........................................................................................................................................ 7 2.3 Test Procedures ............................................................................................................................... 7 2.4 Uncertainty of Radiated Emission .................................................................................................. 7 2.5 Test Result....................................................................................................................................... 8-13 3. RADIATED EMISSION TEST ............................................................................................. 14 3.1 Test Equipments.............................................................................................................................. 14 3.2 Test Setup........................................................................................................................................ 14 3.3 Radiation Limit ............................................................................................................................... 15 3.4 Test Procedures ............................................................................................................................... 16 3.5 Uncertainty of Radiated Emission .................................................................................................. 16 3.6 Radiated RF Noise Measurement Results....................................................................................... 17-21 3.7 Photos of Radiated Test .................................................................................................................. 23-28 4. BANDWIDTH MEASUREMENT ........................................................................................ 29 4.1 Test Equipments.............................................................................................................................. 29 4.2 Test Setup........................................................................................................................................ 29 4.3 Limits of Bandwidth Measurement................................................................................................. 29 4.4 Test Procedure................................................................................................................................. 29 4.5 Uncertainty of Conducted Emission ................................................…

Text truncated - open the document above for the full version.

Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 21 of 30 3.7 Photos of Radiated Test TX mode : (1) X-axis Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 22 of 30 Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 23 of 30 (2) Y-axis Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 24 of 30 Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 25 of 30 (3) Z-axis Ecom Sertech Corp. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung Hsing Rd., ChuTugn Chen, Hsinchu, Taiwan 310, R.O.C TEL: 886-3-5918012 FAX: 886-3-5825720 FCC ID ：LWN9312F24 Report No.：ER04-12-049FRF Page 26 of 30